Progress in Polymer Processing
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Progress in Polymer Processing: (Volume 501 Key Engineering Materials)
Progress in Polymer Processing: (Volume 501 Key Engineering Materials)

Progress in Polymer Processing: (Volume 501 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

The Asian Workshop on Polymer Processing 2011(AWPP2011), organized by JSPP, SAMP and the China Science Foundation, was hosted by Qingdao University of Science and Technology in Qingdao, China from November 4 to 7th, 2011. Volume is indexed by Thomson Reuters CPCI-S (WoS). Numerous leading experts on polymer materials and processing presented their recent research finding at the meeting, and the result is an invaluable state-of-the-art guide to the subject.

Table of Contents:
Preface, Sponsors and Committee A Concept of Differential-Integral Method Applied in Polymer Processing and Molding Thermal Conductivity and Mechanical Properties of Natural Rubber Filled with Modified-Graphite Finite-Element Comparative Analysis of Two Kinds of Meshing Rotor Anti-Icing Nanoparticle/Polymer Composite Coatings Artificial Neural Networks in Prediction of Mechanical Behavior of High Performance Plastic Composites Effect of Plasticizer and Load on Melt Electrospinning of PLA Synthesis and Characterization of Epothilone B Molecular Imprinted Polymers Study of Konjac Glucomannan Esterification with Dicarboxylic Anhydride and Effect of Degree of Esterification on Water Absorbency Finite Element Analysis of Flow Field in Nano-Laminated Coextrusion Die Research on Crafts of Ni-P-Al2O3-SiO2 Electroless Composite Plating Application of SMA on the Alloy of Nylon6/ABS Thermal Conductivity of Amorphous and Crystalline SiO2 Nano-Films from Molecular Dynamics Simulations Numerical Investigation of the Effect of Rotors’ Geometric Structure on Mixing Properties of Continuous Mixer Dynamic Simulation of 3D Fluid Field for Four-Wing Synchronous Mixer Rotor and Four-Wing Asynchronous Mixer Rotor Data Measurement and Analysis Method for YLJ Series Tire Uniformity Testing Machine Study on Thermal Conductivity of Filled Silicone Rubber Review of Research Progress on Galling in Sheet Metal Forming The Study on the Preparation and Properties of PPO/PA66 Alloy with a New Type of Compatibtlizer B A New Preparation Method of Barrier Material Based on Micro-Nano Lamination Technology The Structure Design of a New V-Belt The Influence on the Physical and Mechanical Properties of the Tread by Preheating of Raw Rubber Analysis of Influences of Processing Parameters on Filling Behavior in Microinjection Molding with a Hot Runner Nozzle Non-Plug Solid Conveying Theory and Granule in Feeding Section by Single-Screw Extrusion Molding Characterization and Catalytic Activity of Fenton-Like Catalyst: Fe2O3/Attapulgite A New Technology for the Synthesis of Rare-Earth Stearate and Several Metal Stearate at the same Time Thermal Conductivity and Thermal Mechanism of Octadecane from Molecular Dynamics Simulations Mechanical Behavior of the Rubber Blanket Used for Electrical Machine Hanging Simulation on Effect of Five Kinds of Belt Structures on Tire Performance Resin-Based Truss Composite Materials and its Preparation Process Design of a Multi Microinjection Molding Module for Thermoplastic Polymer Filling-to-Packing Switchover Mode Based on Cavity Pressure for Injection Molding Experimental Studies on Epoxy-Amine System Using Microwave and Conventional Curing Approaches Dynamic Modeling and Vibration Analysis of the Drum Washing Machine Based on Four-Terminal Parameter Method The Study of Electroless Ni-B Coating on 45 Steel Numerical Simulation and Balance Design of Rubber Injection Mold Gating System Based on POLYFLOW The Addition of ABS-g-MAH on Properties of Nylon6/ABS Alloy Mesoscale Simulation of Drug Molecules Distribution in the Matrix of Konjac Glucomannan (KGM) at Varying Drug Concentrations Preparation of Soy Protein Isolate Modified by Glutaric Dialdehyde and its Application in Rubber Composite Research on Moulding Process and Dielectric Property of Polyimide Foam The Modular Design of Cold Feeding Rubber Extruders Numerical Simulation of Differential Injection Molding Based on Moldex 3D Structure and Properties of Cobaltous Chloride/Polyvinyl Alcohol-Glutaraldehyde(CC/PVA-GA) Reversible Thermochromic Microcapsule Key Parameters Influencing Microcellular Polystyrene Cell Morphology Blowing with Supercritical CO2 Experimental Study of Relations between Synchronous Rotor Speed and Mixing Process Effect of Die Structure on Radial Orientation of Short Fiber in Tire Tread and its Performance Vibration Analysis of Tripod of the Twin Tripod Sliding Universal Joint Based on ANSYS Analytical Method of the Rolling Resistance of Radial Tire Base on ANSYS The Binding Performance of Erythromycin Imprinted Polymeric Microspheres Simulation of Micro-Gear Manufactured by Differential Injection Molding Based on Moldex 3D Effects of Particle Size on the Rubber Mixing Process and Mechanical Properties of Compound Research on Optimization of the Process Parameters of Bio-Packaging Materials by Response Surface Method Research on Spiral Engagement Cold Feeding Rubber Extruder Mechanical, Morphological and Thermally Behaviors of Natural Rubber/Aluminum Powder Composites Effect of Processing Conditions on the Shrinkage and Warpage of Glass Fiber Reinforced PP Using Microcellular Injection Molding Experimental Research and Development on Electrical Screw Tire Vulcanizing Machine Kinematic Simulation of the Tripod Universal Joint with or without Gap Research of Low-Temperature Regeneration of Waste EPDM The Study of Electroless Ni-P and Ni-P-PTFE Coating on Steel Tire Mold Injection Compression Molding Process and Mould Design of Plastic Optical Lens Research on Vulcanization Process of Short Fiber-Rubber Composite Material Preparation of Porous Polysulfone Membranes Using Ionic Liquids with Different Alkyl Chain as Additives Finite Element Analysis of Globular Indexing Cam Mechanism Based on ANSYS Simulation Analysis of Residual Stress of the Plastic Gear Based on Moldflow Research on Rubber One Step Injection Molding Technology and Equipment Study on Curing Process of Resin Nanocomposites Corrosion Resistance of TiN Imitation Gold Decoration Coatings on Golden-Pen Components Investigation on Brazing of Carbon Film Deposited Diamond for Cutting Vehicle Tyre Research on Structure and Mechanical Properties of Epoxy Resin/Clay Nanocomposites by Shock Wave Method 3D Fluid Field FEM Analysis of Meshing Rotors of Mixer Numerical Study on Enhanced Paraffin/Air Heat Transfer with Extended Surface Numerical Simulation of Tire Steady-State Temperature Field Based on ANSYS Workbench FEM Comparative Analysis of Synchronous Rotor with Different Helix Angle in the Process of Mixing Analysis of the Impact of Unloaded Radius of Tire on the Handling and Stability of Automobile on the Basis of ADAMS/CAR Prediction Method of Main Parameters in Internal Mixer Based on Chaotic Neural Network Study on Conductive Properties of Composites Based on the In-Mold Laminating Technology Surface Tension Measurement by the Drop Volume Method Numerical Simulation and Experimental Verification of Butterfly Porous Fences Finite Element Analysis of Turning Tire Active Mold Segment Using DEFORM-3D Experimental Study on the Formula of Recycled Rubber Power Modified Asphalt The Wear Model Parameters Research of Cone Ring Sliding Plate on Tire Segmented Mould Study on the Submarine Pipeline with Flexible Spoilers Energy Saving Study on Carbon Black Pneumatic Conveying Optimize Mixing Process Parameters of Synchronous Rotor Mixer Based on Orthogonal Method The Cathode Design in Electrolysis Deburring of Gear Face Experimental Study on Effects of Filling Factor and Polyester Short Fiber Addition on Mixing of Short Fiber-Rubber Composite Material Optimization of Vertical Slab of Screw Tire-Shaping Vulcanizing Machine Based on FEM Analysis of Biomass Briquette Machine Ring Mold Length-Diameter Ratio of Finite Element Based on ANSYS Heat Transfer and Friction Characteristics Analyses between WPC Materials and Conveyor Plate Effect of Post-Vulcanization on the Tire Curing Degree Mechanical and Thermal Properties of Carbon Black Filled Natural Rubber and Fractal Analysis of Rubber Fracture Surfaces Analysis and Study on the Pulsed Solid-Plug Phase Pneumatic Conveying Thermal Simulation and Experimental Study on Tire Building Machine Hot Knife The Finite Element Analysis of Steel Cord in Radial Tire’s Belt Ply The Numerical Simulation for Thermal Deformation in Grinding Hardening Thin Workpiece A New Method for Recognizing Carton Black in Rubber Image The Numerical Simulating Research about the Pulse Cleaning Process of Bag Filter A Review of Studies on the Granular Agglomeration Mechanisms and Anti-Agglomeration Methods The Mathematical Modeling Linear Analysis of Triple Thread Single-Screw Pump Experimental Study of Vulcanization State on Rubber Mechanical Properties Morphological and Flame Retardant Behaviors of Rubber-Modified Asphalt Prediction of Tire Inflated Shape Based on Pressure Function Method Research on the Rheology of Polymer Latex Modified Cement Paste Containing Mineral Admixtures Application of Ointment to Foaming SBR Finite Element Analysis of PP-3 Meshing Rotor Application and Research of Acoustic Emission Technology in the Tank Security Detection The Optimization of Weighing and Feeding System for Powder in Mixer Feeding System Composition Analysis of Spooling Tension about Automatic Winder A Survey of Robot Visual Tracking Algorithm Discussion on N-Lamina Model of Non-Plug Flow Solid Conveying in Feeding Section by Single-Screw Extrusion Molding Effect of Preparation Ways on Structure and Properties of Steraric Acid/Na+-Montmorillonite Phase-Change Composite Materials


Best Sellers


Product Details
  • ISBN-13: 9783038136873
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 501 Key Engineering Materials
  • ISBN-10: 3038136875
  • Publisher Date: 24 Jan 2012
  • Binding: Digital download and online
  • No of Pages: 620


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Progress in Polymer Processing: (Volume 501 Key Engineering Materials)
Trans Tech Publications Ltd -
Progress in Polymer Processing: (Volume 501 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Progress in Polymer Processing: (Volume 501 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!