Advanced Material Science and Technology
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Material Science and Technology: (Volumes 675-677 Materials Science Forum)
Advanced Material Science and Technology: (Volumes 675-677 Materials Science Forum)

Advanced Material Science and Technology: (Volumes 675-677 Materials Science Forum)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). This two-volume set comprises more than 306 peer-reviewed papers, grouped together under the headings of: invited papers, new energy materials, ceramics, metallic glasses, nanomaterials, biomaterials, polymer and composite materials, performance evaluation and applications of materials, mechanical behaviour of materials, materials processing and technology, modeling and simulation, catalyst materials, functional materials, smart materials and intelligent structures, coatings and thin films. This book will provide a valuable reference source for researchers in the field of advanced materials science and technology.

Table of Contents:
Sponsors and Committees Preface Invited speech How Crystals Form from a Cloud of Atoms Microstructure, Texture and Residual Stresses Induced by Surface Thermo-Mechanical Treatments Si 2p Core Level Shifts of the Epitaxial SiON Layer on a SiC(0001), Studied by Photoemissin Spectroscopy Development of a Highly Active Pt-Catalyst for Selective Oxidation of CO in Excess H2 at Room Temperature Session A - New energy materials Investigation on the Removal of B Impurity in Metallurgical Grade Si by Electron Beam Melting Amorphous Ni-Co-B Catalyst for Hydrolysis of NaBH4 in Alkaline Solution Electrochemical Studies on Al2O3-Coated Spinel LiMn2O4 for Lithium Ion Batteries Calcium Evaporation from Metallurgical Grade Silicon by an Electron Beam Melting Removal of Phosphorus in Metallurgical Grade Silicon Using Electron Beam Melting Solid Proton Conductor Based on Natural Diatomite Effect of Pulling Rate on Multicrystalline Silicon Ingot during Directional Solidification Synthesis of LiFePO4 Cathode Materials by a Chemical Method Effect of High Volumes of Fly Ash on Flowability and Drying Shrinkage of Engineered Cementitious Composites An Experimental Research on Electrochemical Impedance Spectra of New High-Specific Energy EDLC Study of Photocatalytic Activities with Copper Hydroxyphosphate Post and In Situ Characterization of Strain Control and Crystal Quality in Quantum Well Solar Cell Structure Preparation and Characteristics of FePO4·xH2O Powder Fabrication of LSGM Thin Film Electrolyte on LSCM Anode by RF Magnetron Sputtering for IT-SOFC Phase Equilibria of Boron in Metallurgical Grade Silicon at 1300°C Experiment Research on Removing Metal Impurities of the Pot Material in Vacuum Directional Solidification Functionalized Silica Fume for Chromium (VI) Removal from Wasterwater Oxygen Reduction Reaction on Carbon Supported Ruthenium-Based Electrocatalysts in PEMFC Effects of Impurities Distribution on the Crystal Structure and Electrical Properties of Multi-Crystalline Silicon Ingots Transition-Metal Impurities Removal from Metallurgical Grade Silicon by Electron Beam Injection Resistivity Distribution Characteristics of Metallurgical Silicon Ingot after Directional Solidification Effect of Heating Treatment on the Resistivity of Polycrystalline Silicon Session B- Ceramics Preparation of SiCw/Al2O3 Composite Sheets through Gel-Tape-Casting Process In Situ High Resolution Transmission Electron Microscopy Studies of High Temperature Behavior of Surface Al2O3 Thin Layer on an AlN Particle Rapid Synthesis of Molybdenum Disilicide by High-Energy Ball Milling Effects of CaB2O4 Content on the Sintering Behavior of Hexagonal Boron Nitride Pozzolanic Activity of Ceramic Polishing Powder as Cementitious Material Silicon Carbide Base Ceramic Fiber Synthesis from Polycarbosilane-Modified Polymethylsilane Blend Polymers by Melt Spinning Effects of Rare-Earth Oxides Doping on Microstructures and Properties of Al2O3/TiAl Composites First Principle Study on Ti4AlN3 Properties under Pressure Effect Mechanical Properties and Microstructure of KD-1 SiCf/SiC Composites Fabricated by Vapor Silicon Infiltration Effects of LiF on Sintering Temperature and Microwave Dielectric Properties of (Ca0.3La0.4/3)(Li0.25Nd0.25)TiO3 Ceramics Doped by ZnO-B2O3- SiO2 Glass Microstructure and Mechanical Properties of AlN Ceramics Sintered with Yttrium Nitrate Preparation of High Wear-Resistant Ceramic Parts Surface Treatment of Cubic Boron Nitride Grains Applied to Vitrified Bond Grinding Tools Influence of La2O3 on the Electrical Properties of Dense SnO2 Electrodes Effects of Carbon Source on Fabrication and Characterization of Porous Silicon Nitride Ceramics by Carbothermal Reduction Synthesis of Pr6O11 Doped ZnO-Based Varistors by Pyrogenic Decomposition of Nitrate Densification of Alumina Ceramics by Infiltration of a Nano-Sized Alumina Sol into Alumina Green Samples Session C - Metallic glass Thermodynamic Model and Synthesis of Bulk Metallic Glass in Cu-Zr-Ti System by Mechanical Alloying Oxidation Kinetic and Diffusion Mechanism Study of a Zr-Based Bulk Metallic Glass Alloy Bulk Metallic Glassy Composites with Excellent Electrical Conductivity and Enhanced Plasticity Fabricated by Spark Plasma Sintering Effect of Nb Addition on the Structural and Mechanical Properties of Cu46Zr42Al7Y5 Bulk Metallic Glass Crystallization of Cu45Zr48Al7 Bulk Metallic Glass Initial Oxidation Behavior of Zr55Cu30Al10Ni5 Bulk Metallic Glass in Short-Term Stage Session D - Nanomaterials Morphologies of Quasicrystal Phase in Ternary Mg-Zn-Y Alloys 4A-Molecular Sieve Synthesis by Microwave Heating with Silicon and Aluminum Materials Produced from the Coal Fly Ash A New Synthetic Route to Nano Metal Oxides Preparation and Structural Phase Transitions of Silver Laurate Catalytic Oxidation of NADH on Gold Electrode Modified by Layer-by- Layer Self-Assembly of Thermostable Diaphorase and Redox Polymer Construction of Biosensor Based on Glassy Carbon Electrode Modified by Composite Film of Multi-Walled Carbon Nanotubes and Poly(ethylenimine) The Effect of Strain Rate on the Plastic Deformation Mode of CP-Ti during Surface Nanocrystallization Band Gap Widening and Quantum Confinement Effects of ZnO Nanowires by First-Principles Calculation Study on Nanometer Size Structures in the Cr-Mo Electroplated Layer Using Transmission Electron Microscopy and Positron Lifetime Measurement Microwave Hydrothermal Synthesis of GaN Nanorods Preparation and Morphological Characteristics of Cellulose Micro/Nano Fibrils Application of Scanning Confocal Electron Microscopy to Nanomaterials and the Improvement in Resolution by Image Processing Simulation of Nano-Indentation of Nano SiC Ceramic Micro-Component Synthesis and Characterization of Nanocrystalline SnO2 Powder Preparation of Chitosan/Poly(vinyl Alcohol) Blend Nanofibers Containing Ag-SiO2 Nanoparticles via Electrospinning Electrospun Tin Oxide Nanofibers with Different Precursor Solution Synthesis and Characterizations of Nanoparticle Sulfur Using Eggshell Membrane as Template Mechanochemical Polymorphic Transformation of Photocatalyst Material TiO2 and its Dependence on the Milling Operation Reflective Liquid-Like Films of Silver Nanoparticles Preparation of Ultra-Fine MgO•Al2O3 Spinel Powder and its Metallurgy Behavior in Low Carbon Steel Synthesis and Characterization of Andalusite/Polyaniline Composites Hydrothermal Synthesis of Flower-Like Silver Nanoplate Micro-Assemblies in High Yields Bio-Medicine Coating on Surface of Magnetic Nanoparticles and its Safety Evaluation Preparation and Characteristics of MnAlC Nanoparticles by Plasma Arc-Discharge Urea Effect on Strong Electrorheological Response of Novel Core-Shell Nanoparticles Session E - Biomaterials Synthesis and Characterization of a Novel Biomaterial for the Conservation of Historic Stone Buildings and Sculptures The Comparison between the Borate Glass Ceramic Porous Scaffolds Preparing by the Sintering and Binding Method Chemically Modification to Corn Stalk as a Natural Material for Oil Absorption Determination of Holocellulose and Alpha-Cellulose Contents in Triploid Clones of Populus tomentosa Using NIRS Formation of Porous (Ca, P)-Doped TiO2/Dense Ti Double Coatings on NiTi Alloy Compatibility and Accelerated Degradation of L-Tyrosine Derived Biodegradable Polycarbonate/PEG Blends Poly(styrene-Divinylbenzene) Microspheres Prepared by Seed Swelling Polymerization in the Presence of Tung Oil Methyl Esters Effects of Fiber Orientation Angles and Fluctuation on the Tensile Properties of Sliver-Based Green Composites Effects of Temperature on the Crystallization of Calcium Carbonate in Egg White Protein Solution System TiOx Film Formation on NiTi Alloy (100) Surface: Density Functional Theory Investigation Composites of Poly(lactic Acid) with Rice Straw Fibers Modified by Poly(butyl Acrylate) Study on the Application of Silane Coupling Agent in Rice Straw/Poly(butylene Succinate) Composites Structure Characteristics of the Hemifusus tuba Conch Shell Effects of Hydrophilicity/Hydrophobicity of a Drug on its Release from PLGA Films Session F - Polymer and composite materials Structure and CO Gas Sensing Properties of PPy/LaFeO3 Nanocomposites Relationship between Mechanical Properties of Modified Cementitious Composites and Properties of Polymer Films Poly(vinyl Alcohol)/Cellulose Nanocomposite Pervaporation Membranes for Ethanol Dehydration Investigation on Perforation Mechanism of Medium Density Polyethylene Research on the Porous Structures and Properties of Composite Membranes of Polysulfone and Nanocrystalline Cellulose Compatibilizing Effects of Poly(ethylene Glycol) on PLA/Cellulose Nanowhiskers Composites Synthesis and Application of a Modifier to Enhance General Properties of the Polar Wood Preparation and Application of Starch-Acrylamide-Diallyl Dimethyl Ammonium Chloride Graft Copolymer Effects of Arc Discharge on Wear Properties of Carbon-Carbon Composites Sliding against Cu Trolley under Electric Current Study on Compressed Wood with Urea-Formaldehyde Prepolymer Effect of SiC on the Oxidation Resistance Performance of C/ZrC Composite Prepared by Polymer Infiltration and Pyrolysis Process Influence of Carbon Nanotubes on Mechanical and Thermal Properties of Glass Fiber Reinforced Vinyl Ester Resin Composites Experimental Research on the Durability of WPC Wallboard Made of Paper-Aluminum-Plastics Wastes Natural Fibre/Polypropylene Wrap Spun Yarns and Preforms for Structured Thermoplastic Composites Effect of Lumen Size on Transverse Thermal Conductivity of Unidirectional Natural Fiber-Polymer Composite via Finite Element Method The Time Dependent Behavior of Linear Viscoelastic Polymers Progress of Laminated Materials and Clad Steels Production Research on Polypropylene Electret Melt-Blown Nonwoven Doped with Nano-Tourmaline Nonlinear Rate-Dependent Stress-Strain Behavior of Light-Weight Textile Conveyor Belt Study on Direct-Weld between Bakelite and Aluminum Electrical Conductivity and Electromagnetic Shielding Effectiveness of CB/ABS Composites Develop Flexible Piezoelectric PVDF Nano-Fibrous Membrane Characterization of Asphalt Binders Modified with Hydrated Lime and Limestone Dust Effect of Hot Extrusion on the Microstructure of In Situ TiB2 Particulate Reinforced Magnesium Matrix Composite Vibration of Beams with a Single Delamination under Axial Loading Anticorrosive Properties of Epoxy/Polyurethane IPNs Coatings Modified by Organic Montmorillonite Session G - Performance evaluation and applications of materials Influence of Thermal and Thermo-Mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy Structural Characterization of Wood-Polymer Composite Prepared by In Situ Polymerization of Styrene Durability Improvement of Bio-Based Material by Polymer Extensional Rheology of LDPE from Melt Spinning Technique Microstructure and Properties of High Performance Concrete with Steel Slag Powder Reliability Design for Creep Rupture Strength of 2.25Cr-1Mo Steel Experimental Study on Strength and Deformation of Brittle Rock under Different Compression Condition Molecular Imprinting: Mimicking Molecular Receptors for Antioxidants Temperature Field Simulation of Nitride Hard Film Irradiated by High-Intensity Pulsed Ion Beam Thermo-Oxidative Stability of Bismaleimides by TGA/FTIR Effect and Microscopic Mechanisms of Slag Micropowder on the Reinforcement of CaCO3 Whisker in Cement Composites Preparation of Chloride Ion Selective Electrode and its Potential Response to Different Chloride Solutions Representing Concrete Environments The Enhancement of Integrated Properties of WC-Co Coatings Fabricated Using an HVOF Spraying Investigation on Shock Response of Magnesium Alloy Honeycomb Sandwich Panels under Low Velocity Impact Loading Hydration Process and Mechanism of Fly Ash in the Cement Mortars Enhancement of Sensitivity for the Evaluation of Electrical Properties by Modifying the Nano Structure of Microwave AFM Probe Environmental Degradation of Carbon Fiber Reinforced Polymer (CFRP) and Steel Bond Subjected to Hygrothermal Aging and Loading Microstructure and Properties of Thin-Wall Part by Laser Metal Deposition Shaping Surface Impregnation of Concrete Damaged by Elevated Temperature Features of Grain Boundary Character Distributions in a Austenitic Stainless Steel after Cold Rolling with Low Strain Followed by Single and Two-Step Annealing Fabrication and Properties of Al/Al-Cu Functionally Graded Material Flexural Strengthening with Externally Poured Ultra High Toughness Cementitious Composites Session H - Mechanical behaviour of materials Rolling Contact Fatigue Property of Low-Temperature Bainite in Surface Layer of a Low Carbon Steel Effects of Y2O3 on Microstructure and Mechanical Properties of Laser Clad Coatings Reinforced by In Situ Synthesized TiB and TiC Comparative Study of Magnetic Abrasive Finishing in Free-Form Surface Based on Different Polishing Head Microstructure and Mechanical Properties of Al2O3/TiAl In Situ Composites Doped with Fe2O3 Static and Dynamic Crushing Behaviors of Aluminum Foam Numerical Investigation of Temperature and Forming Rate Effect on AA5086 Warm Formability Surface Effects on Bandgaps of Transverse Waves Propagating in Two Dimensional Phononic Crystals with Nanosized Holes In Situ Stress Measurement Method Based on X-Ray Diffraction under Biaxial Tensile Loading Analysis of Two Ball’s Surface Contact Stress Based on Fractal Theory Mechanical Properties of Centrifugal Casting Al-Cu Alloys Research on the Self-Thickening Effects in the Process of Fabricating Aluminum Foam Using Semi-Solid Melt by Mechanical Stirring Studies on Band Structures and Wave Localization Phenomenon of the Randomly Disordered Two-Dimensional Solid-Fluid Phononic Crystals Progress in Research on Explosion Induced Thixotropy of Concrete Enhancement in Mechanical Properties of Bamboo by Press Forming Effect of Rare Earth La Modification on Microstructure and Properties of ZL101 Alloy Effect of Sputtering Process Conditions on Microstructure and Mechanical Properties of Pt-Fe Nano Film Effects of Interfacial Friction on the Microstructures of Magnesium-Tin Alloy during Continuous Rheo-Forming Process Study of Friction Coefficient and Friction Force on Magnetic Abrasive Finishing Effects of Aluminum Content on Plastic Formability of Wrought Mg Alloy Sheet Produced by Twin-Roll Casting Process Effects of Strain Rate on the Tensile Deformation of Single-Crystal Copper Films A Study of Wear Rate Estimation of Coatings by a Numerical Method End-Mill Evaluation by Measurement of Cutting Force Experimental Investigation of Damage Characteristics in Steel Honeycomb Sandwich Beams Effect of Dissimilar Welding on Mechanical Properties of A7050 and A2024 Aluminum Alloy Influence of High Current Pulsed Electron Beam (HCPEB) Treatment on Wear Resistance of Hypereutectic Al-17.5Si and Al-20Si Alloys Study on Shrinkage and Cracking Performance of SAP-Modified Concrete Study on Hydration Mechanism of Phosphoaluminate Cement Flexural Behavior of Steel Fiber Reinforced Self-Stressing Concrete in Continuous Systems Effect of Microstructure on Mechanical Properties of Ti-Al Based Alloys Session I - Material processing and technology Numerical Simulation and Deformation Research for Cold Enlarging Tube Diameter The Microstructure Evolution during Annealing in Large Strain Deformed Fe-32%Ni Alloy Selective Laser Melting of Multi-Component Ni-Based Powder Mixture for Building Metallic Parts FEM Based Prediction of Residual Stress in Thin-Walled Aluminum Process Tool Wear and Reactions in 304 Stainless Steel during Friction Stir Welding Effects of Annealing on Microstructure and Microhardness of TA15 Titanium Alloy Processed by Equal Channel Angular Pressing Microstructure and Mechanical Properties of Nd:YAG Laser Welded Invar 36 Alloy Embrittlement of Ti-23Al-17Nb Alloy Laser Welded Joint at 650°C A Method for Evaluating Intensity of Water Cavitation Peening Processing Mechanical Properties of Nanocrystalline Diamond Film Prepared by HFCVD The Preparation of Cr12MoV/40Cr Dual-Metal Composite Die Steel by Vacuum Diffusion Welding Influence of Pulsed Electric Current on Dendrite Growth of Sn-Bi Alloy via Real-Time Observation In Situ TiB2 Reinforced Al-12Si Alloy Composites by Semisolid Processing Preparation of Semisolid A356 Alloy by a Cooling Slope Processing Effects of AlN Particles and Electromagnetic Stirring on As-Cast Structure of AZ31 Alloys The Thermal Conductivity Analysis of Sip/Al Base Composites Preparation and Properties of 2D C/SiC Composites by CLVD Processing Fe-Cr-C-TiC High-Chromium Fe-Based Ceramic Composite Coating Prepared by PTA Weld-Surfacing Process Microstructure and Wear-Resisting Property of Submerged-Arc Welding Fe-Cr-C Ceramic Coating Added Alloy Powder Effect of Electrode Force on Expulsion in Resistance Spot Welding with Initial Gap Experimental Research on Making Aerated Concrete by Petroleum Coke Desulfuration Residue Fabrication of SS316L/Ni25 Functionally Gradient Materials Using Laser Engineered Net Shaping Casting of Clad Strip by a Roll Caster Roll Casting of Al-SiCp Strip A Study of Nuclear of Interest Martensitic Steels and FeCr ODS Alloys Using Small Angle Neutron Scattering Fabrication of W-ZrC Cermets by Reactive Melt Infiltration with Polycarbosilane as Preforms’ Adhesive A New Technology for Producing Bimetal Rods Preparation of Polytetrafluoroethylene Ultrafine Fiber Mats with Electrospinning Process On the Crack Defect of CrZrCu Alloy DC Casting Ingot Microstructural Characterization of a Fe-Based Compostie Reinforced by TiC Study on the Reaction Mechanism of Al-ZrO2-B4C System Behavior of Hydrogen during Electroslag Remelting Process Surface Modification and Preparation of High Purity Nanometer Magnesium Hydroxide Using Impinging Stream Manufacturing AISI316L Components via Selective Laser Melting Coupled with Hot Isostatic Pressing Effects of Low Frequency Electromagnetic Field on the Solidification Structure of 6063 Aluminum Alloy during Hot-Top Casting Microwave Absorption Properties of one Thin Absorber Based on Carbonyl-Iron Powder Numerical Simulation of Temperature Field during Laser Deep Penetration Welding Fluoridated Hydroxyapatite/Carbon Nanotubes Composite Coating Fabricated by Radio Frequency Magnetron Sputtering Removal of Iron from Metallurgical Grade Silicon with Pressure Leaching Effects of Li2CO3 on Properties of Mould Flux for High Speed Continuous Casting Session J - Modeling and simulation Process Optimization Simulation of Cast-Steel Rear Axle Deformation Mechanism Analysis of Hydro-Drawing Parabola Workpieces Based on DYNAFORM Constitutive Inequalities for the Damage of Elastic-Brittle Materials η Phase Formation Mechanism at Cemented Carbide YG30/Steel 1045 Joints during Tungsten-Inert-Gas Arc Welding Alloy Development and Process Optimization for a New High Strength and High Toughness Titanium Alloys Ti-63 Finite Element Simulation of Vacuum Hot Bulge Forming Process of Reactor Coolant Pump Rotor-Can Numerical Investigation into Movement Behavior of Metal Powder during Hot Isostatic Pressing Thermo-Mechanical Analysis of CLAM Steel and SS316L in the First Wall for ITER Finite Element Simulation of Vacuum Hot Bulge Forming of Titanium Alloy Cylindrical Workpiece Numerical Simulation and Experiment of Linear Friction Welding Process of Ti6Al4V Alloy Simulation of Discrete Dislocation Statics and Dynamics of Magnesium Foam Modeling of the Influence of Initial Grain Sizes on Dynamic Recrystallization Using a Cellular Automaton Model Multi-Scale Modelling of Low Index Rutile TiO2 Surfaces with a Tight-Binding Variable-Charge Model and Ab Initio Calculations Simulation Study on Horizontal Continuous Casting of Round Copper Billet with Electromagnetic Stirring Investigation of Concrete Filling Result in a New Concrete Filled Steel Tube Structure Using Concrete Visual Model Atomistic Simulation of Deformation Behavior at a Crack Tip in Magnesium Single Crystal Molecular Dynamics Simulations on Sliding Friction between Amorphous Si-DLC Films Numerical Analysis on Thermal Field in Rheocasting-Rolling of Semi-Solid Magnesium Thermodynamic Calculations and Kinetic Simulations of some Advanced Materials Finite Element Simulation of Microstructural Evolution during Inertia Friction Welding Process of Superalloy GH4169 FEM Analysis and Verification of Stress Intensity Factor of Dugdale Model in Silicon Steel Plate under Biaxial Tensile Load Modeling Nucleation of Hydrogen Induced Cracking in Steels during Sour Service Numerical Simulation of Solidification Process for a Machine Tool Bed Micro/Meso Scale Metallic Sheet Forming Process Analysis Based on the Strain Gradient Plasticity Theory Transient 3D Simulation of a Submerged-Arc Furnace for Production of MgO Single Crystal Sheet Material Property Effects upon Dynamic Behavior in Self-Pierce Riveted Joints Modeling and Simulation of Robotic Material Removal Process in Uncertainty Environment Simulation of Axi-Symmetrical Forging Process by “Inverse Approach” Viscosity of Sn-Cu Solders Investigated by Molecular Dynamics First-Principles Study of Adsorption Properties of NO2 on Boron-Doped Silicon Carbide Nanotube Comparative Temperature Field Analysis of MgO Single Crystal Furnace Using Finite Element and Fuzzy Methods Session K - Catalyst materials Synthesis and Performance of Perovskite YMnxFe1-xO3 Photocatalyst Orthogonal Experimental Study on Preparation Conditions of V2O5/TiO2 Catalysts for the SCR of NO with NH3 Application of Hydrophobic Silica/Fiber Composite Aerogels in Organic Absorption Green Synthesis of Nano-Size Silver Particles Colloidal Sol Synergy Effect of Ce/N Co-Doping on Anatase TiO2 Photocatalysts from First Principles Calculation Variation Mechanism of Aspiration Pressure at the Tip of Metal Delivery Tube in Supersonic Atomization Enhanced Photocatalytic Activity of BiVO4 for Water Oxidation by Mo Doping Session L - Functional materials Propagation of SH Waves through an Interface between a Phononic Crystal and a Uniform Solid Adsorption of H2S and SO2 on Activated Carbon Fibers Modified by Ammonium Nitrate Synthesis and Characterization of Mesoporous Silicon Spheres from Solid Silica Spheres Study on Ultra-Strength Mortar Prepared with Mineral Admixture Direction-Independent Band Gaps Extension Based on Thue-Morse Photonic Heterostructures Containing Negative-Index Materials A New Smart Damage Sensor Using Mechanoluminescence Material Flexural Vibration Band Gaps in a Ternary Phononic Crystal Thin Plate Synthesis and Characterization of Sr3MgSi2O8:Eu2+, Dy3+ Phosphor Prepared by a Chemical Solution Method Monodisperse, Luminescent Silica Spheres Synthesized by a New Method Growth Spindle-Like ZnO Nanocrystalline Thin Films on Nickel Layers by Dc Magnetron Sputtering and its Thermal Annealing Properties Electrical Properties of Ag–La0.67Sr0.33MnO3 The Enhanced Magnetoresistance Effect of La0.67Sr0.33MnO3 with Pentavalent Ions Addition Preparation of Oil Core/Polyelectrolyte Shell Microcapsules by a Coacervation Method Determination of Refractive Indices and Linear Coefficients of Thermal Expansion for Development of Athermal Glass Investigation on Post Treatment of Nano-Size Silver Conductive Film Microstructure and Wear Properties of TiC/7075 Composites by In Situ Reaction Liquidus Curve Casting Method Preparation of Al-Sc Alloy by LiF-ScF3-ScCl3 Molten Salt Electrolysis Session M - Smart materials and intelligent structure Piezoelectric Micromachined Ultrasonic Transducer with a Dome-Shaped Single Layer Structure Quantitatively Characterizing Damages on Steel Beams by Using PZT Impedance Method A Modified Electro-Mechanical Impedance Model for Dynamic Analysis of PZT Sensor Coupled with Beam Structure Phase Analyses of a TtPt Alloy Synthesized by Spark Plasma Sintering An Experimental Investigation of Mechanical Strength of Knotted NiTi SMA Fiber Composite An Analysis of Phase Transformations for Porous Shape Memory Alloy Considering Hydrostatic Stress Dynamic Responses of TiNi Phase Transformation Cylindrical Shell under Radial Impact Load Effect of Stress and Magnetic Field on Young’s Modulus of Tb0.3Dy0.7Fe2 Oriented Alloy VIMP Curing Process and Health Monitoring of Vinyl Ester Composites Based on Fiber Bragg Grating Sensors Study on the Temperature-Sensitive Properties of Carbon Fiber-Reinforced Mortar Three Layers Weaved once Structure Design and Performance Testing for Fabric Keyboard Switch Elasto-Plastic Earthquake Response Analysis of High-Speed Railway Bridge Fabricated Isolation Bearings Uniform High Magnetostrictive Properties of Terfenol-D Composites Prepared by a Dry Process Session N - Coating and thin films Effects of Curing Method on the Gas Separation Performance of Phenolic Resin/Poly(vinyl Alcohol)-Based Carbon Membrane Materials Preparation and Characteristics of Integral Water Repellent Cement-Based Materials Effect of Negative Pulse Voltage on the Microstructure and Corrosion Resistance of Microarc Oxidation Film of A356 Aluminum Alloy Preparation and Properties of the Organic-Inorganic Composite Coating on Aluminum Alloy Internal Stress and Grain Size Effect on the Phase Stabilization of ZrO2 Deposited by MOCVD Enhanced Surface Properties Induced by High Current Pulsed Electron Beam (HCPEB) Treatment Influence of Al2O3 Buffer Layers on the Properties of Indium–Tin Oxide Films on PET Substrate by RF-Magnetron Sputtering The Fabrication of W-Cu Modified Layers on the Surface of the Continuous Casting Machine Mould Copper Plate by Infiltration A Method for Ultrasonic Characterization of Density, Thickness and Velocity of Homogeneous Coating Correlating Ultrasonic Velocity and Porosity Using FDTD Method Based on Random Pores Model ZrC-Zr2Si Coating on Carbon Fiber Reinforced Silicon Carbide Matrix Composites Prepared by Pack Cementation Method Formation of TiO2/Ti Composite Photocatalyst Film by 2-Step Mechanical Coating Technique Performance Improvement of TiO2/Ti Composite Photocatalyst Film by Heat Oxidation Treatment Preparation and Electrical Properties of the Polyimide/Multi-Walled Carbon Nanotubes (MWNTs) Nanocomposites Analysis on the Mechanical and Electrical Properties of PI/MWNTs Nano-Hybrid Films Tribological Properties of Plasma Sprayed Self-Lubricating NiCr/Cr3C2-BN Composite Coatings The Competitive Reactions in Atomic Layer Deposition of HfO2, ZrO2 and Al2O3 on Hydroxylated Si(100) Surfaces: A Density Functional Theory Study Improvement in Wear and Corrosive Wear Resistance of Ti6Al4V Alloy by Double Glow Plasma Surface Alloying with W-Mo and W-Mo-N Highly Textured (111) Pt Substrates for Preferred Orientation Controlled AlN Films Antiferromagnetic Layer Thickness Dependence of Exchange Bias in Sputter-Deposited Co/CoO/Co Trilayer A Study of Yellow Solvent Dyes in Coated Paper Ink-Jet Ink System and Printing Test Erosion Wear Resistance of TiAlCrN Coating on Stainless Steel Impacted by Solid Particles Relationship between Structure and Functional Properties of the ZnO:Al Thin Films Effects of Negative Bias Pulse on Characteristics of a-C:H Films Prepared by Plasma-Based Ion Implantation The Surface Coating of YAG:Ce Phosphors with ZnO Nanoparticles for White LED Preparation of P-Type Microcrystal Si:H Films by ECR-PECVD Research on Corrosion-Resistance of High Velocity Arc Spray Coatings on Surface of Steel Structure in Splash Zone Environment Effect of Gas Temperature on the Particle Deposition Characteristics and Coating Microstructure by Cold Spray Study on WC-Ni60 Complex Coating by High Frequency Induction Cladding Study on Photoluminescence of Porous Silicon with Cu Deposition Microstructure and Corrosion Resistance of TiN Coating on HSS by Pulsed Bias Cathodic Arc Ion Plating Effect of the Si3N4 Coating on the Mc-Si Ingot in the Process of Multicrystalline Silicon Purification by Metallurgical Methods Microstructure Modifications Induced by Pulsed Electron Beam in Steels


Best Sellers


Product Details
  • ISBN-13: 9783038134602
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 675-677 Materials Science Forum
  • ISBN-10: 3038134600
  • Publisher Date: 21 Feb 2011
  • Binding: Digital download and online
  • No of Pages: 1360


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Material Science and Technology: (Volumes 675-677 Materials Science Forum)
Trans Tech Publications Ltd -
Advanced Material Science and Technology: (Volumes 675-677 Materials Science Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Material Science and Technology: (Volumes 675-677 Materials Science Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!