Surface Engineering
Home > Science, Technology & Agriculture > Technology: general issues > Engineering: general > Surface Engineering: (Volumes 373-374 Key Engineering Materials)
Surface Engineering: (Volumes 373-374 Key Engineering Materials)

Surface Engineering: (Volumes 373-374 Key Engineering Materials)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). The theme of this collection was “Innovation and Development of Surface Engineering Towards a Conservation-Minded Society”; a timely reminder of the obligation of advanced technologies to commit to energy & resource saving and environmental protection. Surface engineering must play a more-and-more important role in energy-saving, materials-saving and environmental protection in the coming years obey the 4R (Reuse, Reduce, Recycle, Remanufacture) rule and contribute to development of the world economy.

Table of Contents:
Committee Preface I. Thermal Spray Technology The Remanufacturing Engineering and Automatic Surface Engineering Technology Effect of Plasma Sprayed Ceramic and Cermet Coatings on Wear-Out Failure of High Temperature Ball Valve Preparation and Characterization of Ni-Al-Cr3C2 Coating Comparative Study of 321 Stainless Steel and 321-Al Composite Coatings Deposited by Arc Spraying Process Effect of HVOF Sprayed MCrAlY Coating on Thermomechanical and Isothermal Fatigue Life of Superalloy M963 Performance Study of Erosion Wear of Nanostructured WC-12Co Coatings Sprayed by HVOF Fabrication and Evaluation of Plasma-Sprayed Functionally Gradient W/Cu Coatings as Plasma Facing Materials in Fusion Devices Microstructure and Abrasion Resistance Mechanism of CrB Particles Reinforced MMC Coating Micro-Damage Evolution and Residual Stress in Thermally Grown Oxides of Detonation Gun Sprayed Thermal Barrier Coatings Plasma Transferred Arc Powder Surfacing Technology of Thrust Face Microstructure and Performance Analysis of Cr3C2-25%NiCr Coating Prepared by Plasma Spraying Process Microstructure and Properties of Multi-Function Micro-Plasma Sprayed Al2O3 Coatings Effect of Heat Treatment on Microstructures and Properties of Zinc-Aluminum Coating on AZ91D Magnesium Alloy Properties of Multi-Function Micro-Plasma Sprayed Nanostructured Al2O3-13wt%TiO2 Coatings Corrosion Protection of A3 Steel with Zn-Al-Mg-RE Coating from Arc Spraying Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats Effect of Annealing Treatment on the Structure and Microhardness of Cold-Sprayed Nanostructured FeAl/WC Composite Coating Study on Arc Spraying Technique for Repairing Automobile Parts Based on Four Factors Experimental Method Study on the Plasma-Sprayed Molybdenum as Plasma Facing Materials in Fusion Reactor High Velocity Arc-Sprayed Coating by CrB Powder Wire for Elevated Temperature Erosion Protection in Circulating Fluidized Bed Boilers An Automatic High Velocity Arc Spraying System II. Vapour Deposition Technology PVD-PECVD Hybrid Processes: Synthesis of Composite Thin Films and Process Understanding RIBAD Deposition of TiN on Magnesium Alloy Evolution of Nanoindentation Hardness of Fe/Cu Nanometer-Scale Multilayers by Magnetron Sputtering Molecular Dynamics Studies on the Growth and Structural Properties of Hydrogenated DLC Films Structure of Alumina Layer on the Damage Resistance of Multilayered CVD Coating under Repeated Impact Loading Study on the Mechanic Properties of DLC Films on Different Metal Substrates Material Design of Transition Metal Nitrides for Hard Coatings by Metal and Nonmetal Atom Substitution Synthesis and Characterization of CrXN Nano-Multilayer Coatings Deposition of CrN Coatings by Filtered Cathodic Vacuum Arc Polycrystalline Columnar Diamond Film Deposited on Spherical Substrate by DC Arc Plasma CVD The Influence of the Magnetic Field Arrangement on the Titanium Oxide Films Properties for Four Targets Closed-Filed Unbalance Magnetron Sputtering Fabrication Of Nd:YVO4 Thin Film Waveguide Grown on Si/SiO2 by Pulsed Laser Deposition The Preparation and Properties of TiN/Carbon Coatings by Ion Beam Assistant Magnetron Spurting Deposition Adhesion Studies of Diamond-Like Carbon Films on 202 Stainless Steel Substrate with a Silicon Interlayer Study on Interfacial Bonding Strength of TiN Films Prepared by Magnetron Sputtering at Low Temperature Rf Sputtering of Composite Fluorocarbon/ZnO Films and their Basic Properties Effect of Yttrium(Y) Content in Al Target on the Thickness of CrAlTiN Film by Magnetron Sputtering Effects of Substrate Bias Voltage on the Microstructure of Cr-Al-N Coatings Effect of Low-Energy Ion Irradiation on Synthesis of Hard and Superhard Films The Microstructure and Properties of CrNx Films Synthesized by Unbalanced Magnetron Sputtering Microstructure and Properties of TiC Coating by Vibrating Electrospark Deposition Effects of Incident Angle on Microstructure of Ni-Cr Film Deposited by PVD Microstructure and Hardness of Ti-Si-C-N Coatings Influence of Bi-Layer Thickness on the Structure and Properties of Multilayered TiN/CrN Coatings by Cathodic Arc Plasma Deposition Ⅲ. Electrodeposition and Electroless Deposition Microstructure and Properties of Surface Coating for Cr12MoV Steel Treated by TD Salt-Bath Vanadizing Process Study of Hard Chromium Plating from Trivalent Chromium Electrolyte Microstructure and Formation Mechanism of Aluminized Coatings on Nickel-Based Superalloys Effect of UV-Irradiation on Anodized Films Formed on Titanium in 0.1M H2SO4 Solution Preparation and Property of Electrodeposited Zn-Fe-SiO2 Composite Coating Effect of pH Value on the Electrodeposition Potential of Cu-In Alloy Film On the Properties of Conductive Adhesive Filled with Electroless Silver Plated Flake Graphite Preparing an Environment-Benignly Rare-Earth Based Chemical Conversion Coatings on 6063 Aluminium Alloy Cerium-Phytic Acid Passivation Treatment on Galvanized Steel Electrodeposited Ni/Al2O3 Composite Coating on NdFeB Permanent Magnets The Study of the Electrochemical Graining Process in NaBO2- H3BO3 Solution and Grain Appearance on the Surface of Aluminum Alloy Study on Electroless Ni-P Deposit on W-Cu Alloy and its Anti-Corrosion Mechanism Sediment Co-Deposition of Nanostructured Ni-Al2O3 Composite Coatings The Effect of Substrates on Properties of Anodic Coatings Formed on Mg and Mg Alloys Anodic Alumina Oxide Template with Branched Structure Formed in Phosphoric Acid Study of Corrosion Performance of Electroless Ni-P Coating with Molybdenum Disulfide Nanoparticles Research of Microstructure and Properties of the 4Cr14Ni14W2Mo Steel with QPQ Salt-Bath Nitriding Deposition of Amorphous Diamond Films on Different Substrates by Electrolysis of Methanol Solution The Study on the Deposition Efficiency of Microarc Oxidation on Aluminum Alloy Electrodeposition of Aluminum on 316L Stainless Steel from Molten Salts Based on Chlorides Preparation and Characterization of Cr-Co-P Alloy Coating Electrodeposited from Trivalent Chromium Solution The Study on the Dispersants and Structures of Ni-P-α-Al2O3 Composite Electroless Plating Coating Microstructure and Properties of Brush Electroplated Nano-SiC-Al2O3/Ni Composite Coating Ⅳ. Energetic Beams and Plasma Surface Treatments Current Status of Supersaturated Surface Engineered S-Phase Materials Low-Temperature Plasma Surface Modification of Medical Grade Austenitic Stainless Steel to Combat Wear and Corrosion Microstructural Features of EB-PVD Thermal Barrier Coatings Irradiated by High-Intensity Pulsed Ion Beam Fabrication of SiC Particulates Reinforced MoSi2 Composite Coating by Laser Cladding Thermal Stability of Nitrogen Expanded Austenite Formed by Plasma Nitriding on AISI304 Austenitic Stainless Steels Controlled Plasma Nitriding for an Optimum Balance between PACVD TiBN Coating Scratch Resistance and Substrate Toughness Stacking Faults in a High Nitrogen Face-Centered-Cubic Phase Formed on Nitrogen-Modified Austenitic Stainless Steel The Finite Element Simulation Research on Stress-Strain Field of Laser Cladding Electron Beam Surface Alloying of a Magnesium Alloy with Al Technical Study of Exhaust Valve Overlaying Based on Micro-Plasma Arc Welding Visual Study on Surface Micro-Topography and Residual Stress of Sheet Metal after Pulsed Laser Peening Microstructure and Tribological Properties of Layer Deposited by Micro-Plasma Arc Welding on Worn Gear Study on Process of Ion Implantation on AZ31 Magnesium Alloy Preparation of Ag Nanoparticles Colloid by Pulsed Laser Ablation in Distilled Water Change of Hydrophobicity on Silicone Rubber Modified by CF4 Capacitively Coupled Plasma and Inductively Coupled Plasma Experiments of Laser Surface Engineering for the Green Remanufacturing of Railway Coupler Ultrasonic Characterization of EB-PVD Thermal Barrier Coatings Irradiated by HIPIB Numerical Simulation on Molten Process of GaAs Target Bombarded by Intense Pulsed Ion Beam Electrical Conducting Coating on Glass Substrate Deposited by Wire Exploding Spray Coating Method Surface Modification of CrN Coating by Plasma Oxidation Process Microstructure and Wear Response of Ni/SiC Laser Cladding Composite Coatings on a Carbon Steel The Structure and Corrosion Properties of Oxidized Layer Formed on Aluminium Alloy by Plasma Oxidation A Numerical Simulation Studying for Plasma Expansion in Laser Ablation Processing The Application of Ultrasonic Phase Spectrum of the Reflection Coefficient on Nondestructive Characterizing the Plasma Sprayed Coatings Irradiated by HIPIB Study on Wear Resistance of Plasma Sprayed Coating Remelted by Laser Investigation of Mechanical Properties and Microstructure of Boron Films Implanted by Polyenergetic Nitrogen Ion The Remanufacturing System Based on Robot MAG Surfacing Investigation of Laser Shock Peening on Aero-Engine Compressor Rotor Blade Model of Heat and Mass Transfer in Atmospheric Pressure Plasma Arc (APPA) Cleaning Metal Surface Preparation and Characterization of Nickel-Based Composites Coatings Reinforced by TiB2+WC on Stainless Steel by Laser Cladding Effect of Laser Scanning and Aging Treatment on Microstructure and Property of Austenitic Heat-Resistant Steel Argon-Oxygen Post-Discharge Treatment of Hexatriacontane: Heat Transfer between Gas Phase and Sample Multiple Needle Cathodes Plasma Surface Alloying of Ti6Al4V with W-Mo-C-N Influence of Oxygen Plasma Treatment on Surface Properties of Armos Fiber Ⅴ. Wear and Corrosion Behaviors of Engineering Surfaces Preparation of Epoxy Modified Organosilicone High-Temperature Resistance Coatings Research on Friction and Wear Performance of Brake Disc Pair Materials for New Type of Drilling Rig Influence of the Plating Conditions on the Structure and Corrosion Resistance of the Ni-Mn Alloy Microstructural Evaluation of High Oxidation Resistant CrAlSiN Hard Coating at Elevated Temperature in Air Atmosphere Study on the Characteristics of Wear Resistance Using Silicate Particles as Additive on the Metal Friction Pairs Effect of Microbes on the Early Corrosion Behavior of Carbon Steel in Eutrophic Lake Corrosion Behavior of AZ31 Magnesium Alloy with Microarc Oxidation Film Irradiated by High-Intensity Pulsed Ion Beam Design and Development of Sulphidation Resistant Coatings Microstructure and Wear Behavior of Arc Sprayed WC-Co /FeCrB and WC-Ni /FeCrB Composite Coatings Preparation and Characterization of γ-Aminopropyltrimethoxysilane and Octadecyltrichlorosilane Self-Assembled Monolayers on Titanium Films Study on Friction Reduction and Anti-Scuffing Technology of Duplex Ion Nitrocarburizing and Sulphurizing The Growth Behaviors of IMC Layers at Soldered and Diffusion Bonding Sn/Cu Interfaces and the Effects of High Magnetic Field Real-Time Measurement of Friction Coefficient in the Frictional Performance Test of Brake Disk Tribological Behavior of Nano-Silicate Mineral Powder as Lubrication Oil Additive Experimental Study for Cutting Performance of Ti(1-x)AlxN Coated Drills Micro-Raman Analysis on Scratch of Si Surface Modified by Ion Implantation Cavitation Behavior of Cast Iron under Different Parameter Conditions Structure and Properties Investigation about a Copper-Base SHS Welding Material The Study of the Boundary Lubrication Mechanism of BN-C-Silicone Oil Composite Colloid at High Temperature Two Surface Treatment Processes and Their Influence on Magnesium Electrochemical Activity Contributions of Surface Engineering to Military Equipment Maintenance Structure and Wear Resistance at Elevated Temperature of Auto Brush-Plating n-Al2O3/Ni Composite Coatings Wear Behaviors of Laser Cladded Nickel-Based Alloy Coatings Reinforced by Molybdenum and Cerium Dioxide under Sliding Friction Study on Anti-Corrosion Epoxy Resin Coating without Solvent Research on Wear Mechanism of Surface Build-Up Welding Material of Brake Disc for Drilling Rig Mathematical Model of the Part Surface Temperature Field Interfacial Reactions in Sn-xZn-Cu/Cu Couples during Soldering An Impact-Abrasion Resistant Surfacing Electrode and its Wear-Resistant Mechanism Application of Surface Engineering Techniques to Corrosion Control over Offshore Engineering Equipment Application of EIS and SEM to Study the Corrosion Behaviors of Organic Coatings/Substrate System Effects of Shape and Distribution of M7C3 on Wear Resistance of Iron Based Composite Friction and Wear Behavior of Plasma Sprayed Nanostructured and Conventional WC-Co Coatings under Water Environment High Temperature Tribological Behavior of Nano-Al2O3 in Different Base Oils Formation Mechanism of the Frictionally-Formed Protective Coating by Using Self-Repairing Material under Sliding Friction Contact Failure Analysis of Nitrided 32Cr2MoV Coated with TiN by Multi-Arc Ion Plating Preparation and Tribological Properties of Surface-Coated Nano-Copper Additives Effects of Erosion Rate on the Erosion-Corrosion Synergism of High Velocity Oxy-Fuel Sprayed Ni-Based Coatings Research on High-Temperature Corrosion-Resistance Performance of Exhaust Pipe of Heavy Duty Vehicle Effect of Plasma Sprayed Coatings on Stress Corrosion Cracking of 08Cr2AlMo Steel in Saturated H2S Solution Wear and Corrosion Resistance of Ni-PTFE-SiO2 Composite Coating Deposited by Jet Electrodeposition Lead-Free Oxidation- Resistant Glass-Ceramic Coating for Heat Processing of Ti-6Al-4V Alloy Erosion Wastage at High Temperature for Arc Spraying Coatings Ⅵ. Functional Films and Coatings Corrosion Behavior of TiO2 Coating on Magnesium Alloy AM60 in Hank’s Solution Deposition of Bioactive Titania Layers on Non-Metallic Substrates under Ambient Conditions due to Hydrolysis of Titanium Oxysulfate Solution Research on the Surface Treatment of Magnetic Powder in Bonded Nd8Fe80B6Co6 Alloy Enhanced Up-Conversion Emission of Er3+-Doped Al2O3 Powders by Y3+ Codoping Prepared in a Non-Aqueous Sol-Gel Process In situ Photoemission Study on Initial Growth of Er2O3 Films on Si(001) Surface Grafting Modification of Silk Fibroin by Atom Transfer Radical Polymerization Drug-Eluting Coronary Stents Coated with Polysulfone-Poly(ethylene Oxide) Block Copolymer by Ultrasonic Spray Research on the Surface Treatment of Carbon Fibers Used in Fabrication of MMCs Wire Influence of the Surface Roughness of Plasma-Sprayed YSZ on LSM Cathode Polarization in Solid Oxide Fuel Cells Preparation and Characterization of Poly Amide Amine (Generation 4.0) Self-Assembled Monolayer on Si (100) Self-Assembled Monolayers of Schiff Base on the Surfaces of Oxidized Copper Fabrication, Surface Modification and Analysis of Biocompatibility of Biologic Chitosan Scaffold A Novel Thermo-Sensitive Polymer Film and its Imaging Properties Study on Preparation and Properties of a Room Temperature Fast Curing Epoxy Resin Nano-Adhesive Preparation of TiC/ Fe Surface Composite by a Casting–SHS Process Surface Modification of Nano-Copper and its Dispersive Behavior in Water Preparation and Characterization of Cu-Coated Nano SiC Composite Particles The Synthesis and Phase Behavior of a Novel Discoticnematic Triphenylene Mesogen and its Application to an Optically Anisotropic Film The Insulated Effect of New Inorganic Coatings on the Surface of Fiber Paper A Photometric Method for Measuring Photoacid Generator Efficiencies Using Rhodamine B as Acid Sensor in Thin Polymer Films Superficial Optimization of Microcapsule Controlled Self-Assembling Patterns of Colloidal Crystal by Solvent Modification Preparation and Characterization of Silver Citrate Nano-Emulsion and Nano-Silver Film Surface Modification and Properties of SiO2 Nano Porous Aerogels Encapsulated Titanium Oxide with Al2O3 and its Ultraviolet Shielding Properties Microstructure and Thermal Behavior of Gradient Bioceramic Coatings Fabricated by Laser Cladding on Titanium Alloy Evaluation and Analysis for the Surface Morphology and Mechanism Properties of the Self-Repair Microcapsule The Effects of Surface Modifications on Tin-Doped Indium Oxide Films: Optoelectrical, Wettability and XPS Investigations Bio-Derived Bone Surface Modification with Biomimetic Thin Film Coatings to Improve Mesenchymal Stem Cells Adhesion and Spreading Study on the Structure and Electrochromism of WO3 and Ti-Doped WO3 Films Study on Electrical Properties and 1064nm Pulse Laser Damage of Vanadium Oxide Thin Film Influence of Hydrothermal Treatment in Deionized Water on Surface Morphology and Structure of Titanium with Biomedical Application by Microarc Oxidation Preparation of Sn-Coated Mesophase Graphite Powders by Carbothermal Reduction Room-Temperature Deposition of Nano-TiO2 Coating by Vacuum Cold Spraying Using TiCl4-Aagglomerated Nano-TiO2 Powder for Flexible Dye-Sensitized Solar Cell Ⅶ. Surface Machining and Mechanical Processing Study on the Machining of Plasma-Sprayed Al2O3 Coatings by Ultrasonic Vibration Cutting Appearance of Mechanical Zinc Coatings and Superficial Pore Sealing Treatment Experimental Investigation on Intensity and Residual Stress in Superficial Layers Induced by Water Cavitation Peening with Aeration Formation and Control of 40Cr Grind-Hardening Fractal Characteristic and Wear Prediction of Surface Micro-Topography of Laser-Textured Roller Effects of Dimple Geometric Parameters on the Performance of a Laser-Textured Mechanical Seal Research on the Robotic Free Abrasive Polishing System for the Rapid Spray Metal Tooling The Surface Coating Robot for Space Solar Cell Array Assembly The Characteristic Analysis of the Surface Wave of Film under Different Surface Tension Design of Surface Finish Using Compound Processes of Grinding and Electrochemical Finishing Following Turning A FEM Study on Thermal Stress in Laminated Composite Interacting of Screw Dislocation with Stiff Imperfect Interface Design of Ultrasonic Ejecting Gun Used for Surface Nanocrystallization Based on CFD Study on CMP Slurry and Technique of Silicon Dioxide Dielectric for ULSI Applications of Nanoindentation Techniques in the Field of Surface Coatings Figuration Control of Deposit in Friction Surfacing The Investigation of Surface Nanocrystallization of Structural Steel Induced by Supersonic Fine Particles Bombarding The Development of Apparent Density Measuring Apparatus of Magnetic Lubricating Oil Study on Chemical Mechanical Polishing Technology of Copper Study on the Polishing Characteristics of the Magnetic Abrasives Finishing to the Slender Pipe Effect of High Pressure Waterjet Peening on Surface Strengthening Properties of 7075-T651 Aluminum Alloy Numerical Simulation of Residual Stress Field Induced by Ultrasonic Shot Peening Study on the Cleaning and Descaling Anticorrosion Technology of Water Cooling Engine without Disassembling


Best Sellers


Product Details
  • ISBN-13: 9783038131885
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 373-374 Key Engineering Materials
  • ISBN-10: 3038131881
  • Publisher Date: 07 Mar 2008
  • Binding: Digital download and online
  • No of Pages: 870


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Surface Engineering: (Volumes 373-374 Key Engineering Materials)
Trans Tech Publications Ltd -
Surface Engineering: (Volumes 373-374 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Surface Engineering: (Volumes 373-374 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!