Buy Advanced Welding and Micro Joining / Packaging for the 21st Century
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Welding and Micro Joining / Packaging for the 21st Century: (Volumes 580-582 Materials Science Forum)
Advanced Welding and Micro Joining / Packaging for the 21st Century: (Volumes 580-582 Materials Science Forum)

Advanced Welding and Micro Joining / Packaging for the 21st Century: (Volumes 580-582 Materials Science Forum)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). The aim of this special collection of papers on the theme of “Advanced Welding and Micro Joining/Packaging for the 21st Century” was to review and analyze the state-of-the-art concerning the welding and joining/packaging technologies which are essential to the production of structures ranging from the compact to the ultra-large.

Table of Contents:
Committees Preface Mechanical Approach for Prediction of Microcracking in Multipass Weld Metal of Ni-Base Alloy 690 Effect of Hydrogen Concentration at Overlay / Base Metal Interface on Repair Weldability of Petroleum Pressure Vessel Microstructural Evolution in 304 Austenitic Stainless Steel during Friction Stir Welding Effect of Weld Metal Microstructure on Cold Crack Susceptibility of High Strength Weld Influence of Heat Input on Mechanical Properties of Multipass Low-Alloy Steel Weld Metal Grain Refinement of Titanium Weld by Heterogeneous Nucleation Comprehensive Analysis for Microstructure Evolution in Welding Effect of Post Weld Heat Treatment on the Interface Microstructure of Explosively Welded Titanium/Stainless Steel Composite Clad Observation of Nucleation and Growth of Acicular Ferrite in HSLA Steel Weld-Metal Analysis of Weld Defects in Offshore Structural H Beams Metallurgical Investigations of Laser Welding of AISI 304 Stainless Steel Effect of Interstitial Elements on the Toughness of Ferritic Stainless Steel Weld Development of Evaluation Method for Solidification Cracking Susceptibility of Inconel600/SUS347 Dissimilar Laser Weld Metal by In-Situ Observation Micro Flash Welding of Super Duplex Stainless Steel with Zr Metallic Glass Insert Effect of Chemical Composition of Welding Wire and Low Temperature Steel Plate on the Weld Properties Made by SAW Weldability of Zinc Coated Steel Sheet by Plasma Arc Welding Laser Epitaxial Cladding of Ni-Base Single Crystal Superalloy Effect of Strain Rate on Microstructural Evolution of Nano-Grained Copper in Accumulative Roll-Bonding Process Welding Technology of Lightweight Alloys A Study on the Energy Absorption Characteristics of CFRP Side Member for Fuel-Efficiency Improvement and Crush Safety Manufacturing and Mechanical Properties of a Honeycomb Sandwich Panel Fracture Toughness of Thick Steel Plates for Shipbuilding The Design Provisions of the New AWS Structural Welding Code – Titanium Fatigue Life Improvement Using Mechanical Post Treatment for Weldment Welding Safety Management Review System for Electric Structures of Nuclear Power Stations in Japan The Study of Field Application of Digital Radiography Testing for Power Plant Weldments Relationship between Feedrate and Fatigue Life of Al7075-T6 Specimens before and after Shotpeening Investigation of Wall Thinning Measurement in Steel Plates by Electromagnetic Acoustic Resonance Characterization of Weldments and Materials Using Thermoelectric Power Measurements Application of Air-Coupled Ultrasonic Techniques Using Carbon/Carbon Composites J-Integral Estimation for the 3-D Through-Thickness Centre-Cracks in Welds of Structural Steels New Technology for NDT Weld Inspections – Phased Arrays and Diffraction Sizing Implementation Status of Performance Demonstration for Nuclear Power Plant Piping Weld Ultrasonic Examination in Korea Analysis on Thermal Strain of AC7A Aluminum Alloy Casting Mold for Automobile Tire by Finite Element Method A Numerical Study on Nonequilibrium Heat Transfer and Crater Formation in Thin Metal Films Irradiated by Femtosecond Pulse Laser Determination of Optimum LASER Welding Parameters and the Development of a LASER Welding Technique to Enhance the Lateral Impact Strength of a Spacer Grid Assembly for a PWR Fuel Assembly Effect of Micro Structure in Fuel Cell Electrode on Concentration of Species in Reaction Layer A Brief Review of Challenges & Technologies to Weld Dissimilar Metals in Two Industries: The Upstream Oil & Gas and the Automotive High-Accuracy Optical Subassembly for High Speed Data Transmission above 10 Gb/s/ch Thermal Resistance Control of an Optical Module Packaging by a Heat Sink of High Thermal Conductivity Study on Induction Spontaneous Heating Reflow Fracture Study of Ultrasonic Aluminum Wire Wedge Bonding on Copper Substrate with Mechanical Peeling-Off Method Bending Fatigue Characteristic of Sn-3.5Ag Solder Bump on Ni-UBM Reproducing the Shilla Dynasty’s Direct-Bonding Granulation Process Effect of Laser Parameter on the Bond Characteristics of Sn-3.5%Ag Solder Ball Characterization of Contact Formation Process for High Efficiency Solar Cell Using Design of Experiment (DOE) Tail Breaking Force in Thermosonic Wire Bonding with Novel Bonding Wires High Dissolution Rate of Solid Materials in Molten Lead-Free Solders Micromechanical Responses of Sn-3.5Ag-xCo Lead-Free Solders by Nanoindentation Coalescence Characteristics of Fusible Particles in Solderable Isotropic Conductive Adhesives (ICAs) An Investigation on Wetting Characteristics of Solder Particle for Solderable Electrically Conductive Adhesives (ECAs) Estimation of Thermal Fatigue Resistance of Sn-Bi (-Ag) and Sn-Ag-Bi-Cu Lead-Free Solders Using Strain Rate Sensitivity Index Small-Scale Resistance Welding of Crossed TiNi Fine Wire Characteristic of Electrochemical Migration on Flexible Printed Circuit Board Analysis of Solder Fatigue in Electronic Packaging Using a Mesh-Insensitive Structural Stress Method Effects of Isothermal Aging on the Microstructure and Tensile Behavior of Sn-3.0Ag-0.5Cu-0.2Co Solder Interfacial Reaction of Electroless Ni-P Plating with Sn-3.5Ag (-Co) Solder Reliability Evaluation of QFP Solder Joint Using Sn-8Zn-3Bi Solder Paste during the Thermal Shock Test Design of a Control System for Welding Robot with Tracking Simulation Reliability Assessment of Lead Free Soldered PWBs Residual Stresses of Friction Stir Welded 2024-T4 Joints Auto-Adaptive Heat Source Model for Numerical Analysis of Friction Stir Welding Computer Simulation of Wetting and Flowing Behaviors of Filler Metal during Laser Brazing Process Finite Element Analysis of the Formation Mechanism of Electrode Pitting in Resistance Spot Welding of an Aluminum Alloy Numerical Analysis on the Temperature Field in Laser-Plasma Hybrid Welding of an Aluminum Alloy Three-Dimensional Numerical Simulation on the Flow and Heat Transfer in the Welding Pool of Laser-Plasma Hybrid Welding Finite Element Analysis of Hybrid Rotary Friction Welding and Investigating the Effects of Pressure on Variations of Temperature and Strain Values Finite Element Modeling of Laser Spot Welded Lap Joint Efficient Diffusion Bonding between BSCCO Superconducting Multifilamentary Tapes Experimental Estimation of Strain Rate during FSW of Al-Alloy Using Plane-Strain Compression Spatter Reduction of Steel Sheets Welding Using Controlled Bridge Transfer (CBT) GMA Process Engineered Weld Design: Are Composite Welds Likely in the Future? Numerical Modeling of Welding Arc with Complex System between Arc Plasma and Molten Electrode Effect of Joint Configuration Design on the Butt Welding Characteristics of Double Wall PE Pipes Predictions of Current Attachment at Thermionic Cathode for TIG Arcs Experimental Investigations of Explosive Welding of Three-Layer Cylinder Composites-Part 1 Numerical Studies of Explosive Welding of Three-Layer Cylinder Composites-Part 2 Experimental and Numerical Investigations of Residual Stress Distributions in the TIG Welding Process Experimental and Numerical Studies of the Effects of Process Parameters in the Continuous Friction Welding Process Cooperative Control of Robotic Welding System in One Side Backingless V Groove Welding An Efficient Welding Method to Control the HAZ Softening of Ultra Fine Grained Steel Weldment Selection of the GTAW-Flux Process Parameters on Type 310 Stainless Steel via a Taguchi-Neural Approach Effect of Probe Thread on Friction Spot Joint Strength of AZ31 Mg Alloy Laser-Arc Hybrid Welding Process of Galvanized Steel Sheets Numerical Analysis of Arc Plasma with Metal Transfer in GMAW Optimization of Electric Resistance Welding Conditions in Small Diameter X60 Pipes for HIC Resistance Advanced Resistance Spot Welding Technologies: New Machine, Adaptive Control and FEM Simulation Friction Stir Lap Joining of AC4C Cast Aluminum Alloy and Zinc-Coated Steel An Evaluation Approach for Prediction of Process Parameters with Genetic Algorithm Monitoring of Backside Image of Molten Pool during Aluminum Pipe Welding Using Vision Sensor Grades 92 and 23: Weldability Assessment and Long-Term Performances for Power Generation Applications Mechanical and Microstructural Properties of Dissimilar Friction Spot Welded Aluminum Alloy Hybrid Friction Stir Welding of Carbon Steel Remote Resistance Welding of Zr-4 Endplate for DUPIC Fuel Fabrication Numerical Study on the Effectiveness of Fixture and Pre-Strain for Reduction of Welding Distortion Linear Friction Welding of Ti-6Al-4V Alloy: Microstructure Characterization Liquid Penetration Induced Cracking in Mg-Alloy Spot Welds The Failure Strength Evaluation on Resistance Welding Mixed Adhesive Bonding Residual Stress Relief and Redistribution of Welded Metals by Vibratory Stress Relaxation A Comparative Evaluation of Friction-Welded and Brazed Ti and AISI 321 Stainless Steel Joints Real-Time Detection and Control of Torch-Height in Waveform Controlled Short-Circuit CO2 Arc Welding A Study on the Angular Distortion Control for the Multi-Pass Butt Weldment of STS 316LN Mechanical and Microstructural Properties of Friction Spot Joined 5052 and 6111 Al Alloys Computer Simulation of Residual Stresses in Welding Process Using Finite Element Method Modelling the Heat and Fluid Flow in the Welded Pool from High Power Arc Sources Friction Stir Welding of Oxygen Free Copper and 60%Cu-40%Zn Copper Alloy Short Circuit Severity Model for Pulse Gas Metal Arc Welding of Aluminum Effects of Process Parameters on Surface Characteristics in Cutting of Cold Rolled Steel Sheets Using a High-Power CW Nd: YAG Laser UV Laser Bonding of Optical Devices on Polymers Equivalent Pulsed GMA Power to 2 kW CW Nd:YAG Laser Power in Welding of Carbon Steel and Al Alloy Effect of Particle Size Distribution of the Feedstock Powder on the Microstructure of Bulk Metallic Glass Sprayed Coating by HVOF on Aluminum Alloy Substrate Effect of Plasma Spraying Parameters on Anisotropic Feature of the Mechanical Property of Plasma Sprayed Al2O3 Coating Numerical Analysis of Distortion of a Laser Welded Thin Metal Structure Fiber Laser Welding of Noncombustible Magnesium Alloy Welding Characteristic of Super Alloys for Nd:YAG Laser A Comparison of Weld Properties with or without Filler Wire on Laser Welding of Magnesium Alloy for Car Industry Laser Welding of Dissimilar Sheath Metals Corrosion Monitoring Characteristics of Plasma RF Sputtered Mg Thin Films under Cyclic Wet-Dry Conditions Laser-Based Fe-36%Ni (Invar®) Alloy Processing with Deep Microgrooves in Aqueous Solutions Development of a LASER Welding Apparatus and a Method for an Inner-Strap Welding of a Spacer Grid Assembly for a PWR Fuel Assembly Development of Remote Welding System Using Fiber Laser Fatigue Analysis of Stainless Steel Overlap Joining Panel Partially Penetrated by Laser Welding Laser Peening without Coating to Mitigate Stress Corrosion Cracking and Fatigue Failure of Welded Components Optimization of Welding Conditions for Sealing of Lithium-Ion Battery by Pulsed Nd:YAG Laser Advanced Laser Joining by Use of Process Optimizing System Technology Laser Joining Applications Highest Efficiency Using Diode Lasers Understanding of Laser and Hybrid Welding Phenomena CW CO2 Laser Welding of Al-Mg Alloys with Filler Wires Laser Roll Welding of Dissimilar Metal Joint of Titanium to Low Carbon Steel Improved High Temperature Tensile Properties of Ti-6Al-4V Alloy by Plasma Sprayed Coating 4th Wave of Modernization by Photon/Electron Technology and Development of Advanced Laser Integrated Manufacturing System (ALIMS) Development of a Visual Monitoring System for Deformation Measuring of Welded Members and its Application Statistical Process Monitoring System for SMT Industry Using Automatic Optical Inspection System Robot Based Laser Welding Technology A Study on Operational Characteristics of SMA Wire Segmented by Thermoelectric Module Geometrical and Welding Conditions on Through-Thickness Residual Stress in Primary Piping of Girth Welded Joints Measurement of Through-Thickness Residual Stress in Primary Piping of Girth Welded Joint A Rate-Dependent Hysteresis Model for Structural Steel (SM490) Considering the Coupled Effect of Strain Rate Hardening and Temperature Rise Angular Distortion Reduction by In-Process Control Welding Using Back Heating Source Effect of Weld HAZ Softening on Tensile Strength of Welded Joint with Weld HAZ Softening Fatigue Crack Growth Characteristics in Dissimilar Weld Metal Joint Strain-Induced Martensitic Phase Transformation by Low-Cycle Fatigue in AISI 316L Stainless Steel A Study for the Fatigue Failure Mode Assessment of Fillet Weldments Finite Element Analysis of the Effect of Residual Stress on Mechanical Behavior of Welded Plates Optional Correlation Function Method in Kriging for Stochastic Optimal Design Characteristics of the Static and Dynamic Behavior of Steel Piles with a Welded Joint Analysis of Fatigue Life of SPR (Self-Piercing Riveting) Jointed Various Specimens Using FEM A Study on the Development of Mach Peening for Prolonging Fatigue Life of Machine Structural Alloy Steel Assessment of Fatigue Life by FEMFAT on the Weld Configuration of Spot Welding Experimental Investigations on Explosive Cladding of Cp-Titanium / AISI 304 Stainless Steel Applicability Evaluation of SS (Structural Stress) Method on Actual Project Analysis of Welding Residual Stress of Steel Pipes Forefront in High Accurate Prediction of Welding Distortion in Japan Development of Welding Distortion Analysis Method Using Residual Strain as Boundary Condition Weldability Studies on the Replacement Repair Welded Joints of a Damaged Steel Bridge Development of Non-Equilibrium Simulation Model of Gas Tungsten Arc Fatigue Damage Model for Numerical Assessment of Fatigue Characteristics Study of Weldability for Circularly Input Heat Investigation of Soundness of Welds in Welding under Static and Cyclic Loading Effects of Different R Ratios on Fatigue Crack Growth in Laser Peened Friction Stir Welds The Variations of Quality Characteristics According to Environmental Factors of High Tension Bolt, Nut and Washer Set The Influence on the Axial Force by the Size Scattering of High Tension Bolt, Nut and Washer Sets Reconfigurable 3D Laser-Stripe Sensor for Welding Processes A Study on the Factors Affecting the Formability of TMCP Steel for Curved Hull Plate


Best Sellers


Product Details
  • ISBN-13: 9783038131717
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 580-582 Materials Science Forum
  • ISBN-10: 3038131717
  • Publisher Date: 12 Jun 2008
  • Binding: Digital download and online
  • No of Pages: 720


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Welding and Micro Joining / Packaging for the 21st Century: (Volumes 580-582 Materials Science Forum)
Trans Tech Publications Ltd -
Advanced Welding and Micro Joining / Packaging for the 21st Century: (Volumes 580-582 Materials Science Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Welding and Micro Joining / Packaging for the 21st Century: (Volumes 580-582 Materials Science Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!