Buy The Mechanical Behavior of Materials X - Bookswagon
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > The Mechanical Behavior of Materials X: (Volumes 345-346 Key Engineering Materials)
The Mechanical Behavior of Materials X: (Volumes 345-346 Key Engineering Materials)

The Mechanical Behavior of Materials X: (Volumes 345-346 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). The objective of this collection was to gather together the latest information on the mechanical behavior of materials. The volumes cover the progress made in all aspects of the mechanical behavior of materials, seen from both the macroscopic and microscopic viewpoints.

Table of Contents:
Oragnizers, Sponsors and Committees Preface Deformation Behavior Grain Size Dependence of Yield Stress Due to Strain Energy of Geometrically Necessary Dislocations Uniaxial Cyclic Deformation Behavior of 6061Al Alloy and its Time-Dependence at Room and High Temperatures Deformation of Dental Abutment Screw after Tightening and Loosening Delay Differential Equation Approach to the Stress-Strain Behavior of Crystalline Materials during Hot Working Formability of Mg-Zn-Zr Based Alloy Sheets at Elevated Temperatures Etch Pit Observation of Dislocations in Early Deformation of Cu-Al Alloy and Pure Mg Polycrystals Sub-Grain Size and Hall-Petch Relation in Pure Copper Single Crystals Effects of Heating Rate and Temperature Holding Time on Mechanical Behaviors of Aluminum Alloy An Upper Bound Solution for a Two-Layer Cylinder Subject to Compression and Twist Thermomechanical Processing Controlling the Austenite Transformation in Si – Mn TRIP Steel Deformation Behaviour and Ultrafine Grained Structure Development in Steels with Different Carbon Content Subjected to Severe Plastic Deformation Quantitative Evaluation of Dislocation Structure Induced by Cyclic Plasticity Strain Rate Dependent Micro- to Macroscopic Deformation Behavior of Carbon-Black Filled Rubber under Monotonic and Cyclic Straining Recrystallization and Grain Growth Behavior of Alloy 718 Casting during Hot Working Texture and Mechanical Properties of ECA-Pressed Ti Effects of Annealing Temperature and Si Content on Mechanical Properties of Cold Drawn Pearlitic Steel Wires The Effect of Nitrogen on High Temperature Deformation Behaviors in Type 316L Stainless Steel Microstructure and Mechanical Properties of Mg-Al-Ca Alloys with Yttrium Addition Microstructure and Texture Dependence of Asymmetric Rolled AZ31 Mg Alloy Long Wave-Length Buckling of Periodic Open-Cell Foams Subjected to Uniaxial Compression Microstructures and Mechanical Properties of Sn-9Zn-xGa Alloy Texture Evolution during Hot Rolling Deformation in Al-5wt%Mg Alloy The Effect of Solids Microcharacteristics on the Macroscopic Parameters of Plastic Deformation Localization in Metals Experimental and Theoretical Investigation of Viscoplastic Deformation of Solder Alloys for Electronic Packaging Temperature Dependence of Deformation Behavior in Magnesium and Magnesium Alloy Single Crystals Formability Evaluation of both Monolithic and Multiphase Zr-Based Bulk Metallic Glasses Effect of Aging Treatment Conditions on the Microstructure and Strength of Fe-36Ni Based Invar Alloy Equal Channel Angular Extrusion of Zinc-Aluminium Metal Matrix Composites Deformation Behavior of Nitrogen Bearing Austenitic Steels with Various Nitrogen Contents Formability of Beta Titanium Alloy in Multi-Stage Deep Drawing Process Effect of Deformation Route on the Mechanical Properties of CP-Ti Deformed by Equal Channel Angular Pressing (ECAP) Deformation Behavior of Magnesium Single Crystals in C-Axis Compression Peak and Average Temperatures in Adiabatic Shear Band for Thermo-Viscoplastic Metal Materials Influence of Impurities to Deformation Behavior in Magnesium Single Crystal A Study on Flexural Strength with the Spreading of the Negative Steel of Girder into the Adjoining Slab Evaluation of Plastic Behaviors in FCC Polycrystal Sheet Metal Bauschinger Effect’ Influence on the Componud Cylinder Containing an Autofrettaged Layer Time-Temperature Dependence of Compressive Behavior of Polypropylene Foams Serrated Flow Behavior in 2090 Al-Li Alloy Effect of Cr2N Precipitation on Deformed Microstructure in High Nitrogen Austenitic Stainless Steel Mechanical Properties and Metallurgical Qualities of Magnesium Alloy Sheets Manufactured by Twin-Roll Casting The Effect of Mn/S Ratio on Hot Ductility of Bi Bearing Free Cutting Steels Achieving Both Powder Consolidation and Grain Refinement for Bulk Nanostructured Materials by Equal-Channel Angular Pressing Study of the Titanium Alloy Deformation Behavior in Equal Channel Angular Extrusion Approximation of Thermal Deformation Behaviour of a Machine Tool to Improve its Process Precision Effect of Peel Rate on Interfacial Strength Work Hardening Behavior of Low Carbon Martensitic Steel Microstructure Control of High Nitrogen Alpha + Beta Type Titanium Alloy Fatigue New Insights into Plasticity-Induced Crack Tip Shielding via Mathematical Modelling and Full Field Photoelasticity Multiaxial Fatigue--A Perspective Analysis of Biaxial Fatigue Crack Growth in Microstructure Modeled by Voronoi-Polygon Variability in Fatigue Behavior of a Zr-Based Bulk Metallic Glass (BMG) as a Result of Average Surface Roughness and Pronounced Surface Defects Fatigue Behaviour of Extruded Mg2Si-Reinforced Magnesium Alloy In-Situ Atomic Force Microscopy and Crystallo Graphic Orientation Analysis of Small Fatigue Crack Deflection Behavior The Mechanism of Fatigue Crack Propagation Coaxing Effect in Stainless Steels and High-Strength Steels Microstructural Effects on Low Cycle Fatigue of Sn-3.8Ag-0.7Cu Pb-Free Solder Evaluation of Fretting Fatigue Life for Steam Generator Tubes in Nuclear Power Plants Fatigue Strength of Formable Ultra High-Strength TRIP-Aided Steels with Bainitic Ferrite Matrix Fatigue Analysis of Multi-Lap Spot Welding of High Strength Steel by Quasi Static Tensile- Shear Test Effects of Laser Peening on Fatigue Crack Behaviors in Pre-Cracked Cast Aluminum Alloy Notched Fatigue of Zr-Based Bulk Metallic Glass Fatigue Behaviour of Type 444 Stainless Steel at Elevated Temperatures The Static and Cyclic Deformation Behaviours Mg-Y2O3 Nanocomposites Low Cycle Fatigue Behavior of Zirconium Tube under the Cyclic Pressurization Low Cycle Fatigue Properties of 316LN Stainless Steel Welded by GTAW in Nitrogen Added Environment A Study on Fatigue Characteristic of Connecting Rod Materials for Automobile A Study on the Fatigue Life Assessment for Urban EMU Structure Elevated-Temperature Creep-Fatigue Crack-Growth Behavior of HAYNES®188 Superalloy Effect of Nitriding on Fatigue Crack Initiation and Fatigue Crack Propagation Retardation in Ni-Cr-Mo Steel Effect of Semi Austempering Treatment on the Fatigue Properties of Ductile Cast Iron Fatigue Life Prediction of High-Strength Bolt Subjecting to Torque Fatigue Crack Growth Behavior in Girth Weld of Natural Gas Transmission Pipelines Crack Orientation Dependence for Fatigue Behavior of Magnesium Single Crystals Hypothesis of Plastic Adaptation in Metal Fatigue: Links of Micro-and Macro-Mechanics Approaches Effect of Powder Size on Fatigue Behaviour in Mg2Si-Dispersed Magnesium Alloys Produced by Solid-State Synthesis Fatigue Crack Growth Acceleration Due to Hydrogen in Type 304 Stainless Steel Life Estimation of SUS304 Steel Subjected to Nonproportionally Combined Push-Pull and Cyclic Torsion at 973K Effects of Small Cracks and Slits on the Fatigue Strength of Steels under Biaxial Loading Fatigue Fracture Behavior Depending on Stacking Sequences in Quasi-Isotropic CFRP Laminates after Lateral Impact A Study on the Micro Property Testing of Micro Embossing Patterned Metallic Thin Foil Beneficial Effects Induced by High Temperature Cycling in Aged Duplex Stainless Steel Short Crack Initiation during Low-Cycle Fatigue in SAF 2507 Duplex Stainless Steel Thermo-Mechanical Fatigue of the Nickel–Base Superalloy Nimonic 90 Crack Orientation Dependence for Fatigue Behavior of Titanium Single Crystals Experimental Investigation on the Fatigue Strength of the Replacement Repair Welded Joints Fatigue Strength Evaluation for Gas Welded Joint of Similar and Dissimilar Materials Prediction of the Scatter of Crack Initiation under High Cycle Fatigue Definition of Damage Parameter in Low-Cycle Fatigue of Gray Cast Iron Fatigue Behaviour of Case-Hardened P/M Steels On the Fatigue Crack Growth Behavior of a Nitrided and Shot Peened Steel Fatigue Crack Initiation in Crystalline Materials – Experimental Evidence and Models Effect of Temperature on the Low Cycle Fatigue of Cast Inconel 792-5A Application of Notch Strain Approach to Evaluate Fatigue Life of Construction Equipment Soft Surface Layer of Age-Hardened Al-Zn Alloys and Its Effect on the Fatigue Strength Two Methods for Determination of Fatigue Crack Propagation Limit Curves and their Application for Different Materials Fracture and Fracture Mechanics Fracture Assessment of Flaws in Weldments using FITNET FFS Procedure: An Overview Alignment and Combination Rules on Multiple Flaws in Fitness-for-Service Procedures Failure Assessment Diagrams for a Solid with a Crack or Notch under Uniaxial and Biaxial Loading Steel of Highest Fracture Energy Influence of Plastic Anisotropy on Limit Load of Welded Joints with Cracks Crack Propagation as a Free Boundary Problem Dynamic Analysis of a Piezoelectric Material with an Impermeable Penny-Shaped Crack under Pure Torsional Wave Initiation and Propagation of Impact-Induced Damage in CFRP Laminates Finite Geometrically Similar Element Method for Dynamic Fracture Problem Application of ANN Back-Propagation for Fracture Design Parameters of Medium Carbon Steel in Extra-Low Cycle Axial Fatigue Loading Development of Experimental Procedure Based on the Load Separation Method to Measure the Fracture Toughness of Zr-2.5Nb Tubes Intergranular Fracture at 500°C in Pre-Fatigue Crack Tip Damaged Zone of Austenitic Stainless Steel Failure Stress Estimation of Table Liner for Vertical Roller Mill Effects of Alloying Elements on Fracture Properties of Niobium Stabilized Austenitic Steels at Elevated Temperature Embrittlement Behavior of Isothermally Heat-Treated T/P92 Steel at 350°C Application of the Three-Dimensional Local Hybrid Method to the Structure with a Surface Crack Subjected to Bending Load Fatigue Crack Growth Behavior of a Gas Pressure Welded Part of Rail Steel under Mixed Mode Loading Vibration Fracture Behavior of Sn-xCu Lead-Free Solders Stress and Displacement Fields at a Transient Crack Tip Propagating in Functionally Graded Materials Prevention of Dicing-Induced Damage in Semiconductor Wafers Development and Application of Slow Crack Propagation of Polyethylene Based on Crack Layer Theory Experimental and Theoretical Studies of Slow Crack Growth in Engineering Polymers Evaluation of Fracture Toughness Distribution in Ceramic-Metal Functionally Graded Materials Finite Element Simulation of Crack Propagation Under Mixed Mode Loading Condition Using Element Removing Method Microstructure and Bonding Strength in Overlaying of Stellite 6 Alloy on Spheroidal Graphite Cast Iron by Plasma Transferred Arc Process Effects of Notch Tip Geometry on the Cleavage Fracture of RPV Steel Development of Toughness Scale Diagram Considering Temperature Dependency Effect of Local Wall Thinning on Maximum Load Carrying Capacities of Elbows under Bending Approximate J Estimates for Circumferential Cracks in between Elbows and Attached Pipes Damage Analysis and Limit Tending Design of Thrust Bearing in esPCP System Effect of Temperature and Specimen Thickness on Toughness of Nickel Alloy 22 Connection among the Characteristics of the Low Cycle Fatigue, High Cycle Fatigue and Fatigue Crack Growth Creep and Superplasticity Extending Creep and Superplasticity to Materials with Submicrometer Grain Sizes Effect of Heat Treatment on the Creep Properties of Ti-22Al-27Nb/TiB Composite Superplastic Characteristics and Diffusion Bonding of Ti-6Al-4V Alloy Prediction of Breakdown Transition of Creep Strength in Advanced High Cr Ferritic Steels by Hardness Measurement of Aged Structures at High Temperature Microstructure and Tensile Creep Behavior of Mg-Nd-RE-Ca Casting Alloys Effect of Microstructural Inhomogeneity on Creep Response of Mg-Sn Alloys Analysis of Creep Deformation Due to Grain-Boundary Diffusion/Sliding Behavior of Boron in 9Cr Heat Resistant Steel during Heat Treatment and Creep Deformation Superplasticity of Nanocrystalline ZrO2-Spinel Composite Super Plastic Flow and Cosmic Micromechanics Accommodation of Grain Boundary Sliding in AZ31 Alloy Creep Rupture of Sn-Ag-Cu Pb-Free Solder Alloy Creep Curve Modeling of Hastelloy-X Alloy by Using the Nonlinear Regression Method in the Kachanov-Rabotnov Creep Model A study of Carbon and Nitrogen Free New Alloys with Superior Creep Properties More over 700°C Superplastic Behavior of Ultrafine Grained Al Alloys Fabricated by Severe Plastic Deformation Effect of Powder Particle Sizes on the Development of Ultra Hard Surface through Superplastic Boronizing of Duplex Stainless Steel Influence of Solute Content and Secondary Phases on the Nano-Creep Behavior of Mg-Al-Ca Alloys Failure Mechanism and Analysis Fracture Resistance in Multiphase Alloys The State-of-the-Art of Controlling Intergranular Fracture and Brittleness by Grain Boundary Engineering Slope Stability Analysis by Strength Reduction Elasto-Plastic FEM Dynamic Deformation and Fracture Behavior of Zr-Based Bulk Metallic Glasses Fracture Toughness and Fracture Mechanisms of Cast A356 Aluminum Alloys Improvement of Hardness and Wear Resistance of Steel-Based Surface Composites Fabricated by High-Energy Electron Beam Irradiation Wear Resistance of Plasma-Sprayed Al2O3-TiO2 Nanocoatings Microfracture Observation of Zr-Based Bulk Metallic Glasses Fracture Behavior of Ceramic Matrix Composites during Monotonic and Cyclic Loadings Microstructure and Mechanical Properties of Mg-Al-Ca-Sm Alloys at High Temperature A Study on Fatigue Properties of Sc and Zr Added Al Alloy The Effect of Fiber Winding Angles on the Bending Strength of Fiber-Reinforced Plastic Rods Prediction of Defects in Nano-Imprint Lithography Using FEM Simulation Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load A Study on the Safety Assessment of Car-Body Structure for Urban EMU Failure Mechanism and Analysis of Reinforced Concrete Members with Fiber-Steel Laminate Composites Micromechanics of Rupture in Combined Tension and Shear Calibration and Validation of an Elasto-Viscoplastic Material Model for a Hot Work Tool Steel Used in Pressure Casting Dies Evaluation of Un-Cracking Delamination by Pseudo Crack Model (PCM) in FRMLs Fatigue Crack Growth of Glass Fiber Reinforced Aluminum Alloy Laminate (Al/GFRP) According to the Micro Hole Location Failure Mechanisms of TGV Brake Discs An Evaluation of Thermal Fatigue Cracking and Chemical Reaction in Die Casting Mould Influence of Temperature on the Fretting Wear of Advanced Nuclear Fuel Cladding Tube against Supporting Grid Fretting Wear Damage of the Corroded Fuel Cladding Tubes for Nuclear Fuel Rod against Supporting Grids Evaluation of Friction Force, Wear Volume and Scuffing Life of Piston Rings and Cylinder Blocks with Different Surface Roughness for Low Friction Diesel Engine Twinning and Twinned Bands Turning During Plastic Deformation in Rolled Mg Alloy AZ31 High-Toughening Alumina Composites Weakened by Metastable Hexacelsian Interphases Strain Rate Effect on Out of Plane Shear Strength of Fiber Composites Behavior of Indented Sandwiches Structure with Nomex Honeycomb Core and Metallic Skins Subjected to Compressive Loading (CAI) Macro-, Micro-, Nano-Mechanics Fabrication of Pt-IrOx and Au-V2O5 Thin Films An Approach to Prediction of Evolution of Material Properties in the Vicinity of Frictional Interfaces in Metal Forming A Novel Capacitance Bulge Apparatus and Measurements of the Mechanical Properties of Al Thin Films Using It Performance Evaluation of a Valveless Micropump Considering Electro-Structural-Fluid Interaction Effect of TRIP on the Damping Capacity and Strength in Fe-Al-Mn Alloy A Stage Based on Voice Coil Motor with High Speed and Long Range for Laser Micro/Nano Fabrication In Situ Monitoring of Residual Strain Using Multilayered Microcantilever in Piezoelectric-Driven Microactuator Effect of Size for Micro-Scale Dimples on Surface under Lubricated Sliding Contact Friction Behavior for Micro-Scale Grooved Crosshatch Pattern under Lubricated Sliding Contact Abrasivity of a Dentifrice containing Nano Carbonate Apatite Strength Reliability of Micro Polycrystalline Silicon Structure Evolution of Crystallographic Texture and Mechanical Properties during Annealing of Nanocrystalline Fe-50%Ni Alloy Foil A study on MicroCantilever Deflection for the Infrared Image Sensor using Bimetal Structure Development of Bellows Type Vertical Micro Contact Probe Residual Stress Analysis of Epoxy Coating/Substrate System Using Curvature Measurement Method Quasi-Steady State Principle and In Situ Real-Time Investigation of Transient Strains in 6061-T6 Al Alloy Using Neutron Diffraction Interfacial Fracture Toughness for Film on Substrate Determined by Indentation Method Nanoindentation by Multiple Loads Methodology: A Pile Up Correction Procedure Modeling of the Damage Accumulation and Fracture: Structural-Statistical Aspects A Phenomenological Constitutive Model of Ferroelectrics with Gradual Domain Switching Fatigue Crack Growth Experiments of Resonating Micro-Samples Effects of Microstructures on the Mechanical Properties of Dilute Al-Si Alloys Micromechanical Modeling of Grain Boundary Resistance to Cleavage Fracture Propagation Mechanical Characterisation of Thermal Barrier Coatings Using a Micro-Indentation Instrumented Technique Stresses at the Interface between the Functionally Graded Coating and the Elastic Half-Space Caused by Spherical Indentation Computational Mechanics Numerical Simulation of Ductile Fracture Process Including Shear-Lip Fracture Dynamic Response of the Spectral Element Model by Using the FFT Analysis of Forging Plastic Stress by X.R.D and F.E.M Implicit Formulation of Homogenization Method for Periodic Elastic-Viscoplastic Solids Analysis of Forming Process of Automotive Aluminum Alloys Considering Formability and Springback Spectral Analysis Method for Nonlinear Dynamic Systems Hybrid Full-Field Stress Analysis Around Holes in Tensile-Loaded Plates by Phase-Shifting Photoelasticity Simulation of Texture Evolution during Hot Rolling Deformation in FCC Materials The Effect of Interactive Pedometer with New Algorithm on 10,000 Step Goal Attainments An Adaptive Wavelet Finite Element Method with High-Order B-Spline Basis Functions Elasto-Plastic Analysis of 3-D Inner Cracks Using the Finite Element Alternating Method Finite Element Analysis of Adiabatic Shear Band Formation during Orthogonal Metal Cutting A Study on Melting Phenomena and Enhanced Heat Transfer of Phase Change Material by Ultrasonic Vibrations Numerical Simulation on Thermal Strain Characteristics of Casting Mold for Automobile Tire Stress Analysis of the Heavy Duty Diesel Engine with Compacted Graphite Iron Optimization of a Gate Valve Using Orthogonal Array and Kriging Model Shape Optimization of a Knuckle using the Design of Experiments Computational Study on Mechanical Behavior of Steel-Concrete Composite by using Interface Elements Multi-Scale Modeling and Simulation Transformation Plasticity and the Effect on Quenching Process Simulation First Principles Study on Ideal Strength of Cu Multi-Shell Nano-Wire Multiscale Modelling of Nanoindentation The Pressure-Assisted Master Sintering Surface of Silicon Nitride Phase-Field Modeling of Morphological Change of Ferrite during Decomposition of Austenite in Fe-C Alloy Phase-Field Simulation during Spherulite Formation of Polymer Physical Modelling of Microstructure Development during Technological Processes with Intensive Incremental Deformation Molecular Dynamics Simulation of Dislocation-Obstacle Interactions in Irradiated Materials Molecular Dynamics Study on Characteristics of Misfit Dislocations in Ni-Based Superalloys On the Material Process Simulation Code COSMAP- Simulated Examples and its Experimental Verification for Heat Treatment Process First-Principles Study on Elastic Anomalies in Ag/Al Multilayers Structural Transformation of Single Crystal Silicon under Uniaxial Stress Modeling of Maximum Spread Variation of Workpiece under High Speed Deformation in Rod Rolling Process Molecular Dynamics Simulations on Grain-Boundary Behavior and its Application to Phase-Field Modeling Multiscale Simulations for Carbon Nanotubes Mechanical Behavior Simulation of PMMA for Nano Imprint Lithography Using Molecular Dynamics On Application of Periodic Boundary Conditions in Micro/Meso Multi-Scale Analyses of Composites Environmental Effects on Mechanical Behavior Ionic Inhibition of Environental Fatigue Crack Growth in 7075-T6 Notch Effect on the Corrosion Fatigue Behavior of an Austenitic Stainless Steel Environment Induced Cracking of Turbine Disc Steel: Effect of Organic Acids on Corrosion Fatigue of 3.5NiCrMoV Steels in High Temperature Water System Development of Micro Gas Turbine Co-Generation Effects of High Temperature Gas Environments(H2, Pure Air, Ar, Vacuum) on Slow Strain Rate Tensile Properties at 700°C of TiAl Alloy High Temperature Strength of Three ODS Ferritic/ Martensitic Steels Residual Stress and Oxidation Properties of NITE-SiC Ceramics by Heat Treatment Modelling Intergranular Stress Corrosion Cracking in Simulated Three-Dimensional Microstructures Effect of Refractory Ceramic Coating on the Thermal Oxidation Resistance of Inconel 617 Alloy Corrosion Resistance and Mechanical Properties of Carbon Steel under a High Temperature Pressurized Water A General Model to Chemo-Mechanical Equilibrium of a Geo-Synthetic Polymeric Membrane Interface Oxidation Process of ZrO2-8%Y2O3 / CoNiCrAlY Thermal Barrier Coating System Environmental Fatigue Behaviors of SA508 Gr.1a Low Alloy Steel in 310°C Deoxygenated Water Corrosion Fatigue Crack Propagation Characteristics of TMCP Steel in Synthetic Seawater Condition under Wave Period The Influence of Cathodic Protection on the Mechanical Properties of the X65 Pipe Weld Fatigue Characteristics of Low Carbon Steel in Hydrogen Gas Environment Irradiation Effect on Mechanical Properties and Oxidation Behavior of Nano-Filamentary Copper-Silver Composites Friction and Wear of Flange and Shaft in Compressor under the Environments of PAG Oil and Carbon Dioxide as a Refrigerant Experimental Study on Bonding Mechanism between Corroded Bolts and Grout Experimental Study on Degradation of 1Cr5Mo Steel Tubes in the Coking Furnace at Super Temperature Macro- and Micro-Scale Forming Overview on Nanoimprint Technology - Process, Tools, Applications and Technical Issues for Industrialization Finite Element Analysis of the Forging Process of Magnesium Wheels Strain Loci in Stretch Flange Forming of Aluminum Alloys Powdering in Coating Layer of Galvannealed Nb-Ti Free Extra Low Carbon Steel Sheet Diameter Expansion Deformation Behaviors of Midair Shaft under Various Processing Conditions Material Properties of Thick Aluminum Coating Made by Cold Gas Dynamic Spray Deposition Micro-Incremental Forming of Ti and Au Foils by Indentation Method Innovative Testing and Evaluation Nanoindentation Techniques: A Critical Assessment of the Current Methods of Data Analysis An Electrical Method for Measuring Fatigue and Tensile Properties of Thin Films on Substrates Application of Stress Analysis by Digital Image Correlation and Intelligent Hybrid Method to Unidirectional CFRP Laminate Residual Stress Estimation with Identification of Stress Directionality Using Instrumented Indentation Technique Characterization of Polymer Adhesion through Modified JKR Theory and Instrumented Indentation Technique A Study on Structural Safety Evaluation of Jet Vane under Severe Thermal and Mechanical Loadings Mechanical Behaviour of Cellular Solids and Their Sandwich Panels under Impact Loading Evaluation of Flexural Displacement in Piezoelectric Actuators Considering the Thermal Deformation Real-Time Observations on Deformation and Failure of LY12 Samples under Impact Tension Evaluation of Adhesive Strength in the Bonded Area of Shoes by Using IR Camera Three-Dimensional Measurement of Local Strain Distribution by Tracking Microstructural Features in High-Resolution SR-CT Image Development of Pore Pressure Measurement System in Lacunocanalicular Network of Trabeculae Using MEMS Based Micro-Pressure Transducer Microscopic Multi-Directional Permeability Coefficient of Human Lumbar Vertebral Cancellous Bone Tissue Finite Element Modelling of Small Punch Test on 304H Stainless Steel An Adaptive Loading Test on Collapse Mechanism Formation of Multi-Story Steel Frames Subjected to Uncertain Lateral Load Pattern A Study on the Measuring Device of Muzzle Velocity Using Magnetic Field Gradient Sensor Evaluation of Mechanical Properties of Graphite Layers on a Nuclear Fuel Particle by Kinetic Nano-Indentation Technique Measurement of Adhesion Strength for Patterned Single Layer Ceramic Capacitor Sheet Development of New Evaluation Method for Adhesive Strength between Microsized Photoresist and Si Substrate of MEMS Devices Mechanical Properties of the Intrinsically Conductive Polymer Poly(3,4- Ethylenedioxythiophene) Poly(Styrenesulfonate) (PEDOT/PSS) Application to Nano/Bio Materials and Composites Femtosecond Laser-Induced Precipitation and Manipulation of Noble Metal Nanoparticles in Silicate Glass Mechanical Surface Behavior of ZrN and TiN Coated Dental Screw by Ion-Plating Method Effects of the Deformed Volume and the Volume Fraction on the Local Deformation Behavior of W/Cu Composites Processing and Mechanical Properties of Solid Core and Porous Surface Ti-6Al-4V Implants Fabricated by Powder-Metallurgy Casting and Modeling of Titanium Matrix Composites Surface Interaction Studies on Glass Fiber Reinforced Polymer Bars In Situ Synthesis of TiAl Matrix Composites by Melting Route Mechanical Properties of Carbon Nanofiber Reinforced Polylactic Acid Effect of Microstructure and Sintering Temperature on Fabrication of NITE-SiCf/SiC Composite The Effect of Technological Condition on Electrical Properties of ITO Films Structure Analyses of the Wings of Anotogaster Sieboldii and Hybris Subjacens Hyperelastic Muscle Simulation Deformation Behavior of Reinforced Concrete Members with Prefabricated Fiber Laminate Composites A Study on Anthropomorphic Robot Hand Simulation Driven by SMA Wire Using Segment Control The Effects of Coatings at Diamonds on the Mechanical Behavior of Metal-Diamond Composites Fabrication of High-Resolution Nanopattern by Using Nanocontact Printing with Flexible h-PDMS Stamp Multi-Scale Modelling Scheme for Carbon Nanotube Reinforced Metal Matrix Composites Bending Property of Sandwich Beams with MWNTs/Polymer Nanocomposites as Core Materials Polyurethane Coating on Coronary Stents Heat Treatment and Impact Testing of Composite Wires Non-Destructive Evaluation (NDE) and Characterization (NDC) A Simple and Direct Method for Local Temperature Measurement and its Applications to Materials Evaluations Magnetic Investigation of Thermal Shock Fatigue Process Influence of the Thickness and Frequency in the Infrared Hybrid Method in Consideration of Heat Conduction Eddy Current and Fuzzy Inference to Control Defects Growth in Reinforced Concrete Application of Magnetostrictive Transducer for the Long-Range Guided Wave Inspection Characterization of Composite Materials Using an Inverse Technique A Gear Chain Fault Detection Method Using an Adaptive Interference Canceling Improvement of the Accuracy of Infinitesimal Deformation of the Sub-Pixel Order by Digital Image Correlation A Nondestructive Study Using Lattice Plane Specific Analysis on a Nano-Precipitate Strengthened Alloy Evaluation of Linear and Nonlinear Ultrasonic Response of Contacting Surfaces Characterisation of Composite Material Properties by an Inverse Technique Propagation Characteristic of Elastic Wave in Pipe Identifying Elastic Properties of Isotropic Materials by Finite Element Analyses and Vibration Data A Study on the Equipotent Switching Direct Current Potential Drop Method for the Monitoring of Piping Thinning Reliability and Life Prediction Fatigue Life Calculation of Metallic Materials Development of Accelerated Lifetime Testing Technique of Engineering Plastics Leak Behavior of SCC Degraded SG Tubes at a Constant Pressure A Study on Experimental Evaluation for Fracture Behavior of Carbon Steel Pipes for High Pressure Service with Local Wall Thinning Structural Integrity Evaluation of API 5L X65 Pipe Subjected to Pre-Strain up to Tensile Strain Using the API 579 Procedure Limit Loads for Circumferential Cracks in the Steam Generator Tube under Combined Pressure and Bending Loads Assessment of In-Plane Size Effect for Nuclear Carbon Steels Using Damage Models A Study on the Fretting Wear Resistance of a Zirconium Alloy with the Variation of Supporting Spring Properties Reliability-Based Optimization for Fatigue Maintenance Planning of Freight Car Assessment of Fire Damage to 321 Stainless Steel Equipment in a Chemical Unit Plastic Limit Loads for Piping Branch Junctions Extending Endurance for the Friction Coefficient Development of Automobile Wiper Blade The Time Dependent Reliability Analysis for the Deteriorated Reinforced Concrete Columns Using the Monte Carlo Simulation Reliability Evaluation of Hydrothermal Crystallization on Plasma-Sprayed HA Coatings by the Weibull Model Vibration Fatigue Reliability of Lead and Lead-Free Solder Joint by FORM/SORM Delamination Analysis of Low-Temperature Processed SU-8 Photoresist for MEMS Device Fabrication Mechanical Behavior of Joints Damage Mechanics of Solder Joints under High Current Density Welding of High Carbon Steel without Transformation Mechanical Joint of Abutment/Fixture Screw Interface in the Internal Dental Implant System The Effect of a Free Drop Impact on the Bolted Joint of the Radioactive Transport Package Strength Behaviour of Rockmass Containing Coplanar Close Intermittent Joints under Direct Shear Condition Development of Dissimilar Inertia Welding Process of Large Superalloy Spindle Numerical Simulation of Friction Stir Welding of AA6111-T4 Sheets Elasto-Plastic Stress Distribution in Triplate Joint Assembly under Bending Moment The Influence of Welding Conditions on Mechanical Properties and Microstructural Change of TIG Welded Joint in Extruded Plate AZ31B Mg Alloy Dissimilar Metal Welding of Austenite Stainless Steel and Carbon Steel Using Nd:YAG Laser a Continuous Wave Wide-Gap Brazing of IN738 and the Bonding Strength Using Ni-Based Filler Metal Powders Application of Finite Element Analysis for the Prediction of the Fatigue Lifetime of Spot Welds with Triple SPCC plates Effect of Heating Rate on Al Bonding in Air by Inserted A5056 Disk Laser Welding Characteristics of Cold Rolled Carbon Steel Utilize Continuous Wave Nd:YAG Laser Experiment Investigation on Failure Behavior of Partial-Strength Connections with Column Skin Plate Deformation Influence of the Welded Joint on the Mechanical Behavior of Steel Piles during Static and Dynamic Deformation Viscoelastic Analysis of Adhesively Bonded Double – Lap Joint Surface Friction Welding of Thin Metal Sheets Modeling of Weld Beads for Laser-GMA Hybrid Welding Strength and Modal Analysis on Welded Bracket of the Large-Scale Agitator Numerical Analysis of Mechanical Test Methods for Evaluating Shear Strength of Joint by Using Interface Element Microstructural Factors Governing Mechanical Properties in Friction Stir Welds Interface Properties of Copper/Aluminum/Stainless Steel Clad Materials Nanostructured Polymers and Polymer Nanocomposites Comparative Studies of Tensile Strength on Polyester Resin Matrix Composites with Planar and Random Orientation Fibers Mechanical Properties of Nano/Micro-Silica Particles Bidispersed Epoxy Composites Fracture Toughness of Epoxy Resins Containing Blends of Monomers with Different Molecular Weights Morphology and Viscoelasticity of Organic/Inorganic Hybrid Nanocomposite Others Variation of Material Properties of Piezoelectric Ceramics due to Electric Loading Evaluated by Resonance Frequency A Study on the Aging Behavior of Al-Li-Cu-Zr Alloy Impact Damage Resistance of Glass/Epoxy Laminates with Embedded Shape Memory Alloy Effects of the Additives and Current Density on the Electrodeposition Behavior and Mechanical Properties of the Ni-SiC Composite Coatings Numerical Evaluation of Crashworthiness of Automotive Sheets Sliding Wear Characteristics and Fabrication of LPS-SIC Ceramic by Sintering Additives The Effects of Hot Isostatic Pressing on Aluminium Castings Investigation on the LPCVD LTO Thin Film as a New Dielectric Layer for the Future ULSI Devices Precipitation Behavior of MX Phase in Cr-Mo-N-X(X=V,Nb,Ti) Ferritic Steels Process Design of Profile Ring Rolling for Turbine Diaphragm Using FEM Simulation Tensile Test Techniques for a Nuclear Fuel Cladding in a Hot Cell Effect of TMT Process on the Strength and Precipitation Behavior of an 11Cr-0.3Mo-1.6W Steel during Long Term Aging The Multi-Channels Measurement of Strain Generated Potentials in Osseointegrated Implant-Bone Composite Effect of In Situ Formed Spinel Phase on the Mechanical Properties of Zirconia Ceramics Optical Properties of Aspheric Glass Lens Using DLC Coating Mold The Main Effect of Design Variables for a Safety Valve on a Fracture Pressure Electromagnetic Wave Shielding Properties of ITO/PET Thin Film by Film Thickness Enhancement of Surface Property by Low-Energy Laser Peening without Protective Coating Web-Based Material Database for Material Selection and its Application Programming Interface (API) for CAD Fabrication of Diamond Dispersed Nickel Composite Coating by Electroplating Method to Enhance the Mechanical Property of Coating Synthesis of High Aspect Ratio Iron Oxide Nanoparticles Using Water in Oil Microemulsion Novel Rheometer for Superposed Constant and Oscillatory Shear Rate The Effect of CaO Addition on the Microstructural, Mechanical and Dielectric Properties of Pure MgO Ceramic Stress Relaxation in Selected Magnesium Alloys Stress Analysis during Crack-Crazing Patterns Interactions: A Mathematical Approach Creep Resistance of Thermoplastic Nanocomposites Mechanical Properties of 91% Tungsten Alloy


Best Sellers


Product Details
  • ISBN-13: 9783038131298
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 345-346 Key Engineering Materials
  • ISBN-10: 3038131296
  • Publisher Date: 15 Aug 2007
  • Binding: Digital download and online
  • No of Pages: 1658


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
The Mechanical Behavior of Materials X: (Volumes 345-346 Key Engineering Materials)
Trans Tech Publications Ltd -
The Mechanical Behavior of Materials X: (Volumes 345-346 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

The Mechanical Behavior of Materials X: (Volumes 345-346 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!