Eco-Materials Processing & Design VII
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Eco-Materials Processing & Design VII: (Volumes 510-511 Materials Science Forum)
Eco-Materials Processing & Design VII: (Volumes 510-511 Materials Science Forum)

Eco-Materials Processing & Design VII: (Volumes 510-511 Materials Science Forum)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection offers materials researchers and end-users a wealth of new knowledge encompassing the whole spectrum of ecology, eco-materials, nano-materials, bio-materials, recycling, environmental protection and materials related to energy conversion.

Table of Contents:
Fabrication of Photocatalytic TiO2 Thin Film Using Innovative Aerosol Deposition Method Titanium Oxide-Based Photocatalysts: -From Fundamentals to Practical Applications- Design of Efficient TiO2/SiC Photocatalysts from TiC-SiC Nano Particles for Degradation of Organic Pollutants Diluted in Water Bioactivity of Plasma-Sprayed TiO2 Coating in Simulated Body Fluid by Hydrofluoric Acid Treatment Nitride Formation on Titanium under Irradiation of Intense Pulsed Ion Beam VOC Decomposition by Photocatalytic Wall Paper Photo-Decomposition Property of Thermal Sprayed TiO2 Coatings Hydrogen Production by Catalytic Decomposition of Methane over Carbon Nanofibers Photocatalytic Oxidation and Decomposition of Acetic Acid over TiO2, TS-1 and Ti-MCM-41 Catalysts Impact Evaluation to Human Body Skin of Titania Photocatalyst Fine Particles A Novel Formulation for the Modification of Transition Metal Oxide Surfaces for Antifogging Optical Application Dispersion Stability of TiO2 Powder Synthesized by Homogeneous Precipitation Process at Low Temperatures The Electrochemical Properties of Poly(acrylonitrile) Polymer Electrolyte for Li/S Battery Correlation of Superhydrophilicity and Photocatalytic Activity in the TiO2-Based Porous Thin Films Photocatalytic Properties of Mesoporous TiO2 Films Derived from Evaporation-Induced Self-Assembly Method Influence of Deposition Parameters on Adhesion/Cohesion of Plasma Sprayed TiO2 Coatings A Comparison of Different Preparation Methods of Fe-Mo-Mg-O Catalyst for the Large-Scale Synthesis of Carbon Nanotubes Photocatalytic Characterization of Plasma Sprayed TiO2 Coating in Environmental Engineering Application Microstructure Characterization on TiO2 Based Anodes Preparation and Antibacterial Activity of Silver Ions-Substituted Hydroxyapatite/Titania Photocatalytic Decomposition of NOx Using Ti-, V-, and Mo-MCM-41 Catalysts Influence of Doping on the Antibacterial Effect of TiO2 Nanoparticles Raman Spectroscopic Investigation of Nitrogen-Doped Titanium Dioxide Nanoparticles Characterization and Synthesis of Functional TiO2 Sol-Gel Coatings on the Glass Photo-Oxidation Decomposition of TiO2 Photocatalyst for the Construction Materials Preparation of Ternary Compound BaLi2Ti6O14 by the Sol-Gel Process Dependence of Yellow Phosphor on Optical and Electrical Properties of the White Light Emitting Diode Chip Effect of Hydrothermal Conditions on the Cation Exchange Capacity of MSWI Fly Ash Mechanical Properties of Nanocrystalline HVOF Coatings Characterization of Li1-xNi1+xO2 Prepared by Using Tartaric Acid as a Complexing Agent Nd3+-Doped TiO2 Nanoparticles Prepared by Sol-Hydrothermal Process The Effect of Substrates on the Characteristics of Titania Nano-Coated Particles Prepared by Fluidized Bed Chemical Vapor Deposition (FBCVD) Photocatalytic Properties of TiO2 Coatings Prepared by Cold Spray Process Effects of Constituents in Bio/Photocatalytic Hydrogen Production System Using Experimental Design Tool Nanosized Titanium Oxynitride and Molybdenum Oxynitride Particles Assembled in Mesoporous Silica MCM-41 Simulation of Electric Upsetting and Forging Process for Large Marine Diesel Engine Exhaust Valves Appearance of Indium Oxide Nanorods in MOCVD Growth Compressive Deformation Behaviour of a Closed-Cell Aluminum A Simple Reliable Method of Selecting Epoxy Molding Compounds for High Power Short Wavelength Light Emitting Diode Packages Evaluating the Electrochemical Properties in the Protection Potential of Material for Use in Al Vessels in Seawater A Slow Strain Rate Test Experiment to Evaluate the Characteristics of High-Strength Al-Mg Alloy for Application in Ships Effects of Current Density on the Formation of Anodic Oxide Films on AZ91 CdSe/ZnS Quantum Dots Loaded Solid Lipid Nanoparticles: Novel Luminescent Nanocomposite Particles Corrosion Behavior of Chromium Cast Iron and Steel in Hot Concentrated Alkaline In-Situ Joining of Combustion Synthesized Ni-Al Alloys with Al Casting Alloy Evaluation of Microstructure on SiCp/AZ91 Magnesium Composite Fabricated by Rotation-Cylinder Method Sliding Friction and Wear Properties of Composite Reinforced by Mullite Enhancement of the Characteristics of the ALD HfO2 Film by Using the High-Pressure D2 Annealing Improvement of the Core Loss of SiFe by Optimizing the Operation Conditions of the Laser Scribing Nanocrystalline Structure of Organic Photoconducting Materials Derived by Microwave Recrystallization Method Microstructures and Wear Properties of Al Matrix Composites Fabricated by Two Different Processes Dispersion Stability of Ni Nanoparticles in Ethanol with Poly (1-Vinyl-2-Pyrrolidone) Effect of Heat Treatment on Microstructure, Tensile Properties and Damping Capacity of Mg-Zr Wrought Alloy Microstructures and Mechanical Properties of Mg-Zn-RE-Ca Casting Alloys Characteristics of Thin Film of Nano-Hybrid Synthesized from Acrylic Resin and Colloidal Silca-Silane Sol Properties of Coating Films Synthesized from Nano Colloidal Silica and Alkoxy Silanes Effect of Processing Parameters on the Fabrication of Al2O3p/Al Composites by In-Situ Reaction Process of Molten Al Effects of Processing Parameters on the Mechanical Properties of SiCp/AC8A Composites by Pressureless Metal Infiltration Process Wear Characteristics of Particulate Reinforced Metal Matrix Composites Fabricated by a Pressureless Metal Infiltration Process Modification of Mg2Si Morphology in As-Cast Mg-Al-Si Alloys with Strontium and Antimony Chipless Forming Process Using Rotary Swaging Machine with Four-Dies Microstructure Analyses and FE Simulation of Automotive Product in the Hot Forging Process Using Aluminum Alloys Castability, Tensile and Creep Properties of Mg-xAl-Zn with Variation of Al Content Development of Manufacturing Process Using Cold Incremental Forming Technique for Micro-Alloyed Non-Heat-Treated Material Development of Cube-Textured Ni and Ni-W Alloy Tapes by Focused Infrared Heating Shape Memory Effect and Superelasticity of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers Electrochemical and Structural Properties of Si/Ni/Cu Electrode Films Fabricated with Different Methods Reciprocating Sliding Wear Behavior of Inconel 600 Mated with SUS 304 Stainless Steel at Elevated Temperatures The Cavitation Behavior of Fe-Cr-C-Si-Ni Alloys Effect of Tin on the Microstructures and Mechanical Properties of a Au-Pt-Cu Alloy Effect of Indium on Bonding between Porcelain and Au-Pt-Cu Alloy Fabrication and Magnetic Properties of Mullite Based Nanocomposites with Embedded FeCr Alloy Nanoparticles Al-La-Ni-Fe Amorphous Alloys and Amorphous-Crystalline Composites Produced by Mechanical Alloying Net-Shape Forming of TiAl Automotive Parts for Fuel Efficiency Effect of Al on Microstructural and Mechanical Characteristics of Plasma Electrolytic Oxide Coatings on Magnesium Effect of Impurity and Gas Nature on Microstructure of SiC Microtubes in Double Step Reaction Process Modified Fabric and Its Electromagnetic Protection Characteristics Interfacial Reaction between Molten Al Alloys and Titanium Matrix Composites Preparation and Characterization of Chemical Activated Fibers on Various Carbon Fibers Fabrication of Ni Sulfides by Thermal Sulfidation Fabrication of Nickel-Silver Rods and Plate through a Small Cross Section Continuous Casting Process Combinational Effects of Ni Precursors on Ni/YSZ Cermet Anode Optimization of Sheet Metal Process Parameters of a Shield Case Piece Using Computer Simulation Development of 2-Cavity Die Casting Process for AM50 Mg Steering Column Lock Housing Module Synthesis Nanosized MgAl2O4 Spinel Powder with Excellent Sinterability High Temperature Deformation Behavior of Pre-Sintered Al-10Si-5Fe Based Alloy Mechanical Behavior of TiB2 Nanoparticles Reinforced Cu Matrix Composites Synthesized by In-Situ Processing Microstructures and Tensile Properties of Fe-40Al Intermetallic with High Boron Content Fluidity of A356 Alloy during In-Ladle DTC Rheocasting High Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying Elements Microstructural Control of 7075 Al Wrought Alloys through Thixoextrusion Route Thermal and Phase Evolutions of As-Milled Powders Fabricated by Mechanical Alloying in the TiH2-C System H2S/CO2 Corrosion Behavior of Tubular Goods under High Temperature and High Pressure Improved Heat and Corrosion Resistance of Mg-Al-Zn Alloys by Additions of Minor Alloying Elements Characteristics of Spent Foundry Sand - Loess Mixture as Ceramic Support Materials The Transfection Efficacy of Chitosan-DNA Nanoparticles on MGC803, SMMC-7721, MG63 Cells Characteristic Evaluation of Extrusion Parameters on Direct Extrusion Process of 3003 Al Alloy Used for Automotive Condenser Tubing Vacuum Diffusion Brazing of Al5052 Alloys Using Ag-28Cu Insert Metal Morphological Evolution of Primary Solid Phase in Semi-Solid Slurry during the Isothermal Holding Thermal Conductivity of Hot-Pressed BN Ceramics Evaluation of Oxidation Behavior of the C-B4C-SiC Composite through Continuous Measurement of Mass Change and Gas Concentration Modeling for Optimum Thermal Property of Wave-Typed Heat Sink by Computational Simulation High Temperature Oxidation of TiAl(La)N Coating Deposited on a Steel Substrate by Arc-Ion Plating High Temperature Oxidation of WC-ZrN Superhard Nanocomposite Film High Temperature Oxidation of Electroplated Cr-C Coating Cyclic-Oxidation of Ti3SiC2 and Ti3AlC2 between 900 and 1200°C in Air Synthesis and Structural Investigation of Nano-Sized BaTiO3 Powders Analysis of Deformation Characteristics in Wave-Typed Heat Sink Composed of Fin and Base Thermal Stability of 40Cr Steel with Surface Nanocrystallization Recrystallization Behaviors and High Temperature Tensile Properties of Mg-Al-Sn-(Zn) Wrought Alloys Improvement of Corrosion Resistance of Stainless Steel by ZrO2-SiO2 Sol-Gel Coatings Fabrication of Nano-Sized Gold Dot Array Using Bi-Layer Nano Imprint Lithography Microstructure Evolution with Solidification Rates in IN 738LC Superalloy TGO Growth Behavior with Thermal Fatigue and Its Effect on Fracture Behavior of Thermal Barrier Coatings Relationship between Microstructure and Tensile Strength in the Directionally Solidified (23-27) at. % Al-Ni Alloys Sub-100nm Hybrid Stamp Fabrication by Hot Embossing Characterization of Fe-Mo Alloyed Nanoparticles Synthesized by Chemical Vapor Condensation Process Growth of CNTs on 304 Stainless Steel Using Sparked Iron as a Catalyst Abnormal Grain Growth Mechanism in Alumina Effect of MgF2 Additive on the Mechanical Properties in Hydroxyapatite / Zirconia Composites Estimation of Low Cycle Fatigue Life on the Accumulated Hysteresis Energy of Δσ·Δεp for Direct Aged Alloy 718 (Ni-Based Superalloys) The XPS and GDS Study of SrBi2Ta2O9/ZrO2/Si (MFIS) Structure According to Heat Treatment Effects of ZrO2 Buffer Layer Effect of Slag Layer on Flow Patterns in a Gas Stirred Ladle Effect of Melt Depth and Nozzle Type on the Mixing Behavior in Bottom-Blown Steelmaking Ladle – A Water Model Approach The Effect of Cold Equal Channel Angular Process on Texture of Magnesium Alloy (AZ31) Kinetic Analysis of the Decomposition of Calcium Carbonate Using Danyang Limestone Effect of Frit Content in Ag Paste and Thickness of Transparent Dielectric on Yellowing Phenomenon Effect of Thermo-Mechanical Variables on the Dynamic Ferrite Transformation Induced by Hot Deformation in 0.22C-Mn Steel Formation of Ultra Fine Ferrite and Determination of Critical Strain in the Strain Induced Dynamic Transformation for 0.22C-Mn Steel Prediction of Flow Curves and Micro-Structural Evolution in Strain Induced Dynamic Transformation of Low Carbon Steel Textures and Mechanical Properties of Melt-Extruded Al-Cu Alloys Effect of Electromagnetic Stirring on Orientation Distribution Function of Primary Solid Phase of Al-Cu Alloy Cell Sensing Margin of Lead-Free (Bi,La)4Ti3O12Thin Film Deposited on MTP Cell Structure in High Density FeRAM Device Hydrogen Absorption Kinetics of Ti-Nb-Cr Alloys Effects of La2O3 on the Piezoelectric Properties of Lead-Free (Bi0.5Na0.5)0.94Ba0.06TiO3 Piezoelectric Ceramics Quantitative Analysis of Micro-Macro Domain Transition of PNN-PT-PZ(x) System at Higher PZ Content Effects of Void Formation within the Pb-Free BGA Solder Balls on the Mechanical Joint Strength Interfacial Reaction and Joint Strength on Cu UBM with Pb-Free Flip Chip Solder Bumps TEM Observation of Interfacial Reaction Layers Formed Between Pb(Lead)-Free Sn-3.5Ag Solder and ENIG Plated Cu Substrate Reliability of Sn-Ag-Cu Flip Chip Package with Underfill under Thermal Shock The Effect of Boron on the Sliding Wear Behavior of Iron-Based Hardfacing Alloys for Nuclear Power Plants Valves Sliding Wear Behaviors of Steam Generator Tubes in Various Environments Fabrication of Lead Free Micro Solder Powder by Melts Dispersion Technique Etching Mechanism of Pb-Free Glasses in Acid Solution for Barrier Ribs in Plasma Display Panel Thermal Properties of Bi2O3-B2O3-ZnO Glass System Formation of Layer on Bismate Frit Surface during Wet Milling Development of Novel Wastewater Reclamation System Using Microfiltration with Advanced New Membrane Material and Electrodialysis Changes in Adsorption Characterization of MSWI Fly Ash by NaOH Treatment ( Ⅰ ) Evaluation of Pelletized Adsorbent Made for Removing VOCs by MSWI Fly Ash ( Ⅱ ) The Effect of Meta Kaolines on the Activation of Waste Concrete Sludges Fabrication Characteristics of Mineral Wool Fiber Used the Waste Application of Media Manufactural by Waste Plastic to Stormwater Treatment in Urban Drainage System Recycling of Waste Coal Fly Ash: Synthesis of Zeolite-Like Minerals from Residue Yielded by Extraction of Aluminum Ions Polymer/Inorganic Composite Materials for Quick Repair of Cement Concrete Pavement Luminescence Porous Ceramics Using Recycling Glass Effect of Pair-Mineralizer on the Reaction of Alite and Calcium Langbeinite Formation Zeolite Synthesis from Coal Bottom Ash for Recycling as an Absorbent of Heavy Metals Stabilization Behavior of Heavy Metals Derived from Wastes on Cementitious Minerals and Hydrates Effect of Slag Compositions on the Extraction of Metallic Components from the Used PCB Low Temperature Synthesis of Porous Cordierite from Fly Ash Fabrication and Characterization of Porous Ceramic Panel Using Recycled Glass Powder Formation Characterization of Ultra-Fine Cu Powder from Cu(OH)2 Slurry by Wet Reduction Method Characterization of Friction Materials Reinforced by Porous Mullite A Study of Ga2O3 Nanomaterials Synthesized by the Thermal Evaporation of GaN Powders Characteristics of SnO2 One-Dimensional Nanomaterials Synthesized on TiN-Coated Substrates by the Evaporation of Sn Powders Self-Propagating High-Temperature Synthesis for Aluminum Oxynitride (AlON) Effect of Hydrogen Content on Characteristics of Cu/C: H Films Coated on Polyethylene Terephthalate Substrate Prepared by ECR-MOCVD Coupled with a Periodic DC Bias Effects of Annealing Atmosphere on the Optoelectrical Properties of ZnO Thin Films Grown by Atomic Layer Deposition Sputter-Deposited Cr as an Alternative to Electroplated Cr Environmentally Friendly Polyurea Microcapsules of Pesticides by PVA Mediated Interfacial Polymerization Removal of Bilirubin by Albumin-Fixed Polysulfone Membrane Effects of Anodizing Time on Anodizing of Mg-Al Alloy in Alkaline Solution Energy Efficiency Alloy Design in PSN-PMN-PZT Ceramic System for Piezoelectric Transformer Application Vibration-Damping Capacity of Lotus-Type Porous Magnesium at Room Temperature Microstructural Transformations of an Amorphous Fe90 Zr10 Alloy Induced by High-Energy Ball-Milling A Study for Microwave Enhanced Synthesis of NIR Absorbing Materials Hydrothermal Syntheses of Nickel Nanosheets and Their Morphology Characterization of Ni Nanopowders Produced by Electrical Explosion of Wire Technique Effect of Physical and Chemical Change of Lignocellulosic Fiber on Heavy Metal Ion Removal Surface Characteristics of the Engineered Polymeric Media for Filtration and Adsorption in Urban Runoff Preparation of Nickel Powders by the Reduction of Hydrazine of Ni(OH)2 Reactant Slurries from Nonaqueous Media Synthesis of Nickel Powders by the Reduction of Hydrazine from Diethanolamine Solution Mechanical Properties of Copper Hollow Sphere Manufactured by Sintering Process Nano Scale Material Property Measurement of MEMS Material Using Piezo Actuated Material Testing Machine Effect of Indium on the Microstructures and Mechanical Properties of Dental Gold Alloys Rheological Characteristics of Mg-Al Alloys with Ceramic Particles for Meta Foam An Amperometric Biosensor Using Prussian Blue Modified Electrode Preparation of Activated Carbon Fibers by Chemical Activation Method with Hydroxides Preparation of Porous Hydroxyapatite Scaffolds for Bone Tissue Engineering Synthesis of Biodegradable β-TCP/PLGA Composites Using Microwave Energy Synthesis and Magnetic Properties of Fe/SiO2 Nanocomposite Powders by the Chemical Vapor Condensation Process Fabrication of Nanoscale SiC-Based Ceramic Patterns with Near-Zero Residual Layers by Using Imprinting Technique and Reactive Ion Etching Preparation of Silver Metallic Sponge from Macroporous Carbon Template Synthesis of Polymeric Precursor for Oxidation-Resistant SiCBN Ceramic Microstructure via Soft Lithography Influence of the Cup's Edge Geometry on the Transferred Stresses to the Ball/Cup Interface in all Ceramic THR Effect of Pouring Temperature and Holding Time at Semi-Solid Region on the Morphology of Primary Solid Phase in Semi-Solid Slurry Fabrication and Microstructure of ZnO-TiO2 Composite Membranes by a Reverse Micelle and Sol-Gel Processing Fabrication and Microstructure of ZnO-SiO2 Nanoparticles by a Reverse Micelle and Sol-Gel Processing Investment Casting of Ti Alloys for Biomedical Application Controlled Release of Active Substance from Biodegradable Copolymer Matrix Comparison of Silicon Coatings Deposited by Vacuum Plasma Spraying (VPS) & Atmospheric Plasma Spraying (APS) Environmentally Conscious Gas Mixtures for Magnesium Melt Protection Hydrogen Permeation and Surface Characteristics of Pd-Coated Ni-Nb-Ta Amorphous Alloy Membrane Comparison of Hydroxyapatite Synthesized under Different Conditions Densification Mechanism of Fine Ni-20Cr Powder during Pulsed Electric Current Sintering Influence of Two-Step Sintering on Transparency of High Purity Alumina Radio Frequency Interference Characteristics of Plate-Like Soft Magnetic Powders-Polymer Composites Synthesis and Properties of Bulk Amorphous/Nanocrystalline Aluminum Alloy Composites Design for Environment (DfE) of Ultralight Aluminum Camshaft Development Tribological Analysis of Al2O3/TiO2/ZrO2 Nanocomposites as an Alternative for THR Materials The Characteristic of the La3Ga5SiO14 Single Crystal Grown by Vertical Bridgman Method in Ar Atmosphere Preparation and Characterization of a New Type of Sr-Contained Hydroxyapatite Bone Cement High Grade Purification of Sericite by Hydrocyclone and Magnetic Separation Fabrication and Properties of High Strength Al-8Fe-2Mo-2V-1Zr Alloy Produced by Melt Spinning Techniques Low Elastic Modulus β Ti-Nb-Si Alloys for Biomedical Applications Surface Modification of Glass Plate to Enhance Thickness of Silica Aerogel Synthesis of AlON Refractory Raw Materials from Aluminum Dross Using Thermite Reaction Process Thermopneumatic-Actuated Polydimethylsiloxane (PDMS) Microfluidic System Process Development for Cost-Effective Ag-Ni Contact Materials by Simple Solidification Control Novel Method to Fabricate Porous n-HA/PVA Hydrogel Scaffolds Biomimic Tubulose Scaffolds with Multilayer Prepared by Electrospinning for Tissue Engineering A Fast and Low Temperature Eco-Process for Alloy's Joining Antibacterial Effect and Security Evaluation on Nano-Hydroxyapatite Bearing Cu2+ and Zn2+ Study on Improving Stainless Steel Antibacterial Capability Influences of the Crystallization Behavior of n-HA Reinforced PA66 Biocomposite on Its Mechanical Properties Foaming Characteristics of Al-Mg Alloy Foam Fabrication of Porous Clay Materials with Aligned Pore Structures by Freeze-Drying Solvents Effects on Physicochemical Properties of Nano-Porous Silica Aerogels Prepared by Ambient Pressure Drying Method Estimation of Environment-Friendly Permeable Pavement at Laboratory Test Development of Fiber Filter Media to Control Heavy Metals and Nutrients in Urban Stormwater Runoff Use of Bauxite Minerals to Control Pollutant Outflow in Urban Areas Preparation of SiC Nanoporous Membrane for Hydrogen Separation at High Temperature Kinetics of the SiC Formation from Carbon Thin Film and SiO Gas Modification of Natural Zeolite Powder and Its Application to Interior Non-Woven Textile for Indoor Air Quality Control Study on the Biomimetic Properties of Bone Substitute Material: Nanohydroxyapatite/Polyamide 66 Composite Via/Hole Filling by Pulse-Reverse Copper Electroplating for 3D SiP Electrical and Luminescent Properties of Size Controlled ZnO Nanorods Structure and Electrochemical Properties of FeSx Nanoparticles Synthesized by Chemical Vapor Condensation Process Effect of Nano-Structures on the Optical Features of Hydrogenated Amorphous Si Films Photo- and Electroluminescence of Hydrogenated Nanocrystalline Si Prepared by Plasma Enhanced Chemical Vapor Deposition Techniques Nanostructural and Optical Features of nc-Si:H Thin Films Prepared by Plasma Enhanced Chemical Vapor Deposition Techniques Effect of Porosity on Fatigue Strength of Lotus-Type Porous Copper Microstructure, Mechanical Property and Antibacterial Characteristics of Ferritic Stainless Steel Effect of Surface Morphology on Apatite Formation Effect of Compatibilizers on the Properties of Nano-Hydroxyapatite Reinforced Polyamide 66 and High Density Polyethylene Blends Study on the Properties of Microwave Absorption of Zinc Oxide Whisker Preparation of Single-Phase Aragonite Precipitated Calcium Carbonate Used as an Inorganic Eco-Material Inhibition Mechanism of Magnesium Ion on Carbonation Reaction with Ca(OH)2 and CO2 Hydraulic Properties of Tetracalcium Aluminoferrite with Adsorption of Silicate Ions Growth of ZnO Thin Films by Metalorganic Chemical Vapor Deposition Using Isopropyl Alcohol for Oxygen Precursor Growth of Carbon Nanorods on Tungsten Filaments of Light Bulbs A Tetragonal Phase in Cr(N,O) Thin Film Prepared by Pulsed Laser Deposition Clarification of Wire Heating Process in Pulsed Wire Discharge with High-Speed Gas Puff Mechanical Properties and Machinability of Si3N4/hBN Composites Prepared by Pressureless Sintering Micro Groove Forming on AlN/hBN Composites Using Powder Blasting Process Microstructural Development of SiC Ceramics by Liquid-Phase Sintering with Spark Plasma Sintering Technique Change of Formation Yield and Characterization of PCC Particle Synthesized with Impurity Ions Contents by Carbonation Process Fabrication of Ceramic Microchannels with Tailored Pores Electrical Properties of (Ba,Sr)TiO3 Thin Films with Self-Seed Layer Deposited by R.F. Magnetron Sputtering Microstructure and Electrical Properties of R.F Magnetron Sputtering Derived PZT Thin Films Deposited on Interlayer for Pyroelectric IR Sensor Factors of Nozzle Design Affecting on Supersonic Flow in Cold Spray Process Preparation of Electrically Conducting Ceramic Foams Silicon to Silicon Wafer Bonding at Low Temperature Using Residual Stress Controlled Evaporated Glass Thin Film Effect of the Palladium Mid-Layer on the Cyclic Oxidation of Platinum Aluminide Bond Coating The Effect of Tungsten Content on Nanocrystalline Structure of Ni-W Alloy Electrodeposits Materials for Devices Applications in Life Sciences Low-Temperature Thermoelectric Properties of Zn4Sb3 Prepared by Hot Pressing Electrochemical Characteristics of Nano-Silicon/Graphite Composite for the Anode Material of Lithium Secondary Batteries Graphite/Carbon Nanofiber Composite Anode Modified with Nano Size Metal Particles for Lithium Ion Battery Effects on the Carbon Matrix as Conductor in Sulfur Electrode for Lithium/Sulfur Battery Fabrication and Thermoelectric Properties of p-Type Bi1Sb4Te7.5 Alloy Doped with Fe3O4 Characterization of a Piezoresistive Microcantilever as a Sensor for Detecting the Bio-Molecules Characterization of Electrical Properties of Si Nanocrystals Embedded in an Insulating Layer by Scanning Probe Microscopy Charge/Discharge and Electrochemical Characteristics of Secondary Lithium/Pyrite Battery Microstructure and Electrochemical Properties of Post Heat-Treated Li(Ni1/3Co1/3Mn1/3)O2 Cathode Materials for Lithium Ion Battery Effects of Multiwalled Carbon Nanotubes on the Cycle Performance of Sulfur Electrode for Li/S Secondary Battery Thermoelectric Properties of Te Doped CoSb3 -4mol%Zn4 Sb3 Fabrication of YSZ Thin-Film for SOFC Applied by Electron Beam PVD Synthesis of Ceria-Coated Copper Oxide Particles for Direct Hydrocarbon SOFCs Anode Microstructure and Thermoelectric Properties of P-Type Bi0.5Sb1.5Te3 Compounds Prepared by Spark Plasma Sintering Effects of Heat Treatment on Hardness of Nanocrystalline Ni-W Electrodeposits The Effects of Si Addition to the Tin Oxide Thin Films on the Electrochemical Characteristics for Lithium Secondary Microbattery Anode Effects of Deformation on Atmospheric Corrosion of Galvanized Steel Surface Strengthening of Polymer Micromold Using Electroless Ni-P Deposition Synthesis and Analysis of Nano-Crystalline LiNiVO4


Best Sellers


Product Details
  • ISBN-13: 9783038130581
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 510-511 Materials Science Forum
  • ISBN-10: 3038130583
  • Publisher Date: 15 Mar 2006
  • Binding: Digital download and online
  • No of Pages: 1220


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Eco-Materials Processing & Design VII: (Volumes 510-511 Materials Science Forum)
Trans Tech Publications Ltd -
Eco-Materials Processing & Design VII: (Volumes 510-511 Materials Science Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Eco-Materials Processing & Design VII: (Volumes 510-511 Materials Science Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!