Mechanical Engineering, Materials Science and Civil Engineering II
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Mechanical Engineering, Materials Science and Civil Engineering II: (Volume 470 Applied Mechanics and Materials)
Mechanical Engineering, Materials Science and Civil Engineering II: (Volume 470 Applied Mechanics and Materials)

Mechanical Engineering, Materials Science and Civil Engineering II: (Volume 470 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 2nd International Conference on Mechanical Engineering, Materials Science and Civil Engineering (ICMEMSCE 2013), October 25-26, 2013, Beijing, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 231 papers are grouped as follows: Chapter 1: Material Engineering; Chapter 2: Modeling and Simulation; Chapter 3: Manufacturing and Design Science; Chapter 4: Mechanical and Dynamic Research; Chapter 5: Mechatronics and Control Systems; Chapter 6: Information and Automation; Chapter 7: Building Materials; Chapter 8: Civil Engineering

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Material Engineering Study on a Structure of 2,6-Pyridine Dicarboxylic Acid Gallium, (NH4)Ga(C7H3NO4)2 A Study on Wear Properties of GCV Material with DLC Coating Adsorption of Cefradine onto Powder and Activated Carbon Prepared from Orange Peel Bright Line Defects of Hot Rolled Plate for 2205 Duplex Stainless Steel Catalytic Ozonation with Activated Carbon for Treatment of Humic Substances in Water Effect of Fiber Surface Modification with Different Functional Groups Silane Agents on Mechanical Properties of Hemps/Polypropylene Composites Effect of TiB2 on Damping Capacity and Dynamic Young's Modulus of 2219 Alloy Effects of the Mould Temperature on the Properties of Graphite/Carbon Fiber/Copper/Phenolic Resin Composites First-Principles and Experimental Study on Cu Doped SnO2 Structure Highly Solution-Processible Red Light-Emitting Conjugated Polymers Based on Benzothiadiazole Luminescence Mechanism of ZnWO4 Nanopowder Synthesized by Microwave-Assisted Heating Microstructure and Properties of 6061 Aluminum Alloy Superficially Modified by Electron Beam Alloying with 1Cr13 Stainless Steel Preparation and Characterization of Aqueous Polyurethane Polyol Used in Waterbore Two-Component Polyurethane Coating Preparation and Characterization of Polyimide Foam Derived from 3,3’,4,4’-Biphenyltertacarboxylic Dianhydride and 4,4’- Diaminodiphenyl Preparation and Performance Research of the PBC / PLA Biodegradable Film Preparation of Monodisperse Functional Polystyrene/Silica Microsphere Composite via Suspension Polymerization Method Rate-Dependent Constitutive Model Coupled with Temperature Softening for Open-Cell Aluminum Foam Separation Test of Ilmenite in Guizhou Separation Test of Oxide Copper Ore in Yunnan Structural Formability of ABO3-Type Perovskite Compounds: Bond Valence Analysis Study on the Growth Quartz Ampoule of AgGaS2 Study on a Novel Structure of Terbium Complex, C6H14O19Tb2 Study on a Novel Structure of Terbium Complex, C9H24O21Tb2 Study on Microstructural Evolution of Binary Alloy Crystal Growth in Directional Solidification Process Synthesis, Structures, Properties and DFT Studies of a New Bicopper Complexe [Cu(Hdmg)4(Hdmg)(teda)]·6H2O The Research Status of Self-Compensation Lubricating Composites at High Temperature Utilization of Pineapple Leaf Fiber as Technical Fibers Construction of the Macro-Mesoscopic Yield Criterion of Concrete Based on the Technique of Energy Density Supporting Function Effect of Temperature on Friction and Wear Properties of the Modified PTFE Three-Layer Composites Influence of Thermal Effect on Electrochemical Corrosion Behavior of T2 Copper in Simulated Seawater Environment Internal Defect Measurement of Bonding Structure Based on Infrared Thermal Image Micro-Experimentation Research on Compression Sensitivity of Carbon Fiber Concrete Preparation and Characterization of UV Curable Hybrid System Based on Free Radical and Cationic Mechanism Research on Fracture Behavior of a Cr Coating/Original Steel Substrate Material under Thermal Fatigue Loading The Effect of Ultrasound on Oxidation Desulfurization of Diesel The Effect of Ball Media with Different Diameters on Grinding Kinetics of Cassiterite-Polymetallic Sulphides Tribological Characteristics of Al 356 Alloy Reinforced with Red Mud Influence of Ultrasonic Vibration on Metal Plastic Forming Chapter 2: Modeling and Simulation A Computable Model for PCB Assembly Optimization Based on Polychromatic Sets Numerical Solution of Temperature Field for Stress Analysis of Plate Structures DEM Simulation Study of Crosscutting Speed for the Cutting Header Simulation of Rayleigh Wave Dispersion in Dipping Layered Site Based on FLAC3D Finite Element Simulation Analysis of Multi-Stands Three-Roller Cold Rolling Process for Double Metal Composite Seamless Steel Tube Numerical Simulation Analysis on Stability of Coal Pillar of Empty Mine Goaf in North of Shanxi Province Test-Bench Design for Fiber Paying-Off Simulating The Finite Element Analysis of Batching Machine Spindle Based on ANSYS Dynamics Simulation of Sounding Rocket Water Landing Recovery with Fluid-Structure Interaction Method Research on the Semi-Physical Simulation Technology of High Pressure Common Rail Electronic Control System for Low-Speed Marine Diesel Engine Nonlinear Finite Element Analysis for Galloping of Iced Quad-Bundled Conductor The Establishment of Distribution Model of Inner Surface Pressure of Elbow Pipe Based on FLUENT Time Series Modeling of Earthquake Ground Motions Using ARMA-GARCH Models Simulation of Influence of Friction Coefficient on Extrusion of TC4 Alloy Analysis of Removal Rate by Using Magnetorheological Finishing Based on Hysteresis Shear Stress Model Thermal Fluid-Solid Coupling Numerical Simulation in Ultra-Supercritical Steam Trap Analysis of Thermal Radiation Models for Large Open Pool Fire on Ship Deck The Numerical Simulation of Blasting Demolition on the Solid Pier The Research of Parallel Driving Model Based on Cognitive Analysis and Behavioral Analysis Simulation and Topological Optimization of the Lifting Mechanism of a Dump Truck Study of Vehicle Longitudinal Initiative Avoidance Collision System Finite Element Analysis of Gear Pair of Main Drive Gearbox Based on Workover Treatment Numerical Analysis of the Effect of Roadside Accumulated Water on Subgrade Temperature Field in the Freezing Region Computational Models for Functionally Graded Composites Using the SMA as the Metallic Phase A Numerical Simulation of Diesel Engine Oxygen-Enriched Combustion Based on KIVA-3V Application of Three-Parameter Model in Settlement Calculation of Immersed Tube Tunnel A SFMEA Method Based on Modeling and Simulation by Rhapsody High Temperature Compression Deformation Behavior and Rheological Stress Model of HRB400 Combined Simulation Based on AMEsim and Simulink for Hydraulic Cylinder Controlled by Servo Valve Comparative Analysis of Static Strength of Traditional and Bionic Semi-Trailer Frame Coupled Thermo-Flowing 3D Steady State Model of Friction Stir Welding Process Research on the Influence of Bending Unloading Effect on Elongation in Cold Steel Strip Tension Leveling Study of the Effects of Transient Load on Envelope Structure Temperature Distribution in the Molding Process of the Stator of PCP Study on the Full State Function of Structural Parameters for Materials EMD Based on Time-Sequence and Window Function and its Application in Diagnosis of Machinery Faults Visual Design and Computational Analysis of the Hydraulic Support Based on MATLAB Thermal Analysis of Lithium Ion Batteries Using in HEV Discussion on the Grid Densities on the Influence of the Internal Force and Displacement of Thepile Nonlinear Analysis of Rotary Sealing Performance of Rubber O-Ring Static Bending Strength Analysis of the New Self-Healing Composite Gear Based on ANSYS The Optimization of the Beam of High-Speed Computerized Embroidery Machine Chapter 3: Manufacturing and Design Science A Micro Analysis about the Application Problems of "Six Sigma" in Discrete Military Manufacturing Industry Constructing New Product Development for the DC Cooling Fan Industry: ISO/TS16949 Procedures Design Method of the Skull Restoration Based on User-Centered Design of Automatic Production Line for Electrode Defects Inspection of Li-Ion Power Battery Design on Cleaning Device for Slag of Narrow Gap Submerged Arc Welding Design Research of Steel Pipe Combination of Angle Steel Tower of XiYue 220kV Cross Section Design of the Disc Cam Profile with Negative Radius Translating Roller Follower Evaluating Manufacturing Processes with a Novel Approach of Making Fuzzy Judgement Evaluation of Roundness Error Based on the Position of the Centers Optimization of Sulfur-Free-Cutting Steelmaking Variables: Six Sigma-Based Approaches Parameters Optimization of Axial Vibration Drilling Based on the Exit Burr Parametric Design of Six Typical Semi-Outdoor Reticulated Domes Shield Lining Segments Design Research Based on Characteristic Parameters Simulative and Experimental Study on Electromagnetic Pump Supplying Liquid Alloys during Casting: Modeling and Effects of Design Parameters on Pump Height Spiral Roll Forming Machine Design for Metal Rubber Study on Concurrent Maintainability Design Based on Pro/INTRALINK Flexible Rope Transmission Device and Preliminary Study on its Design Lightweight Design for Lower Beam of NC Isothermal Hydraulic Press Novel Design of Manual Mechanical Rotary Table Study on Dedicated Test Bed for the Sealing Performance of Metal Rubber Seal Study on the Influences of Datum Precedence on Functional Tolerance Analysis The Application of Reverse Engineering in Innovation Design Design and Analysis of a Magnetic QZS Vibration Isolator ANSYS Parametric Design of Double Layer Cylinder Reticulated Shell by the Upper and Lower Translation Chapter 4: Mechanical and Dynamic Research A Study on the Key Parameters of Slit Air Nozzle for the Coating Process of Li-Ion Power Battery Aerodynamic Force of a Cantilevered Cylinder in Uniform Flow and Turbulent Boundary Layer An Approach to Investigate Dynamic Parameters of Bearings Joint Surfaces Based on the SDOF System Analysis and Application of the Impact Absorption Behavior of the Composite Tube Effect of Mixed Convective Heat Transfer on Interior Helium Temperature of High-Altitude-Cruising Airships Effect of the Mechanical Properties and Geometric Parameters on the Crack Density of the Thin Film/Substrate System under Residual Stress and Uniaxial Tensile Loading Experimental Investigation of Influence of Normal Pressure on Rotational Friction Behavior The Impact Analysis of Tire Parameter for Tire Wear When Monorail Vehicle Curve Driving Inertia Parameters Identification of Motor Assembly for Electric Vehicles Based on Modal Test Method Kinematics and Dynamics Analysis of Piston-Connecting Rod Mechanism of Internal Combustion Engine Mechanical Analysis and Structural Optimization to theTraining Device for Squatting Numerical Investigation of Static Strength for Tubular Joints Reinforced by Inner Plate Research on the Dynamic Parameters Equivalent Model of Angular Contact Ball Bearings Study on Engine Idling Torque and Speed Ripple Cancellation of HEV The Impact of Suspension Stiffness Parameters on the Curve through Performance of Straddle Type Monorail Vehicle Based on Sensitivity Analysis Transverse Vibration Testing Research for 6.8 Grades Bolted Joint Used on Transmission Tower Vertical Vibration Characteristics Analysis of Stand Rolls System in Six-Roll Cold Tandem Mill Experimental Study on the Surface Roughness of 40Cr by Ultrasonic Finishing Machining Life Prediction of Two Rotor Steels under Creep-Fatigue Interaction at Elevated Temperature The Analysis of Processing Factors for Electro-Arc Machining The Cutting Tool Wear of the Cutting Tool Part of the Cast Iron GTW 35-04 during Drilling Analysis of Dynamic Characteristics of the Dual Ball Screw-Driven Linear Feed System in Z Direction Study on Application of the Mine Anti-Impact and Energy-Absorption Device A Study on the Effect of Driver Model Parameters on the Performance of Driver-Vehicle-Road Closed-Loop System Chapter 5: Mechatronics and Control Systems A Power Optimization Algorithm for Ad Hoc Networks with Variable Rate Control A Study on the Inspection Technology of the Electrode Defects of Li-Ion Power Battery Based on HALCON A Algorithm of Path Planning Based on Multiple Mobile Robots Development of Machine Vision Positioning System of Magnetorheological Fluid (MRF) Actuator Fiber-Optic Extrinsic Fabry-Perot Interferometer Sensors with Multi-Wavelength Intensity Demodulation Forward Kinematics of Parallel Robot Based on Neuro-Fuzzy System Improvement of Production Index for Cell Production by Mobile Robots New Structural Design of Coal Mine Rescue Robot The Research of the Monitoring and Control Device for Pneumatic Rock Drilling Machine Based on Configuration Software Time Optimal Path Planning of Palletizing Robot Nonlinear Model-Based Control for Vacuum Altitude Simulator Study on RBF Neural Network PID Control for Hydro-Viscous Drive System Application of Wireless Communication Technology in the Detection and Debugging for Control System on Bullet Trains Research on the Technology of Two-Axis Synchronization Control Based on Fuzzy PID Fault Detection and Discrimination of Rotating Machinery Using Frequency Symptom Parameter and Bayesian Network PLC-Based Stamp Puncher Application of Nondestructive Testing in Quality Controlling of High-Density Polyethylene Silicore Plastic Duct Chapter 6: Information and Automation Study on CCT Curve and Microstructure Evolution of HRB500E An Application of the Common Maintenance Time in the System Maintenance Allocation Importance Analysis Method of Fuzzy Fault Tree Based on T-S Modle and Application in Hydraulic System The Monitoring System on Energy Consumption of Device Based on Wireless Network Study on the Experiment of Ion Transport Properties in Single Area Double Vortexes Plate ESP A Link Evaluation Method Employing Statistical Means of Received Signal Strength Indicator and Link Quality Indicator for Wireless Sensor Networks The Methods for Increasing of the Efficiency in the Intelligent Assembly Cell Research on Automatic Winding System of Coreless Package Leakage Detection Method for Piping Network Based on BP Neural Network Research on Software Programming Automatically from Movement Sequence Based on Multi-Node System Performance Analysis of LDPC Coded SFH/BPSK in LFM Jamming Research on Customized Indoor Route Recommendation The Model of Load-Shedding Determined in Power Market Safety Assessment of Solid Rocket Motor Waterjet Clearing System Based on Grey Analytic Hierarchy Process Dynamical Variation of Weierstrass-Mandelbrot Function in Higher Dimensional Space Indirect Carbon Emission Measurement of Electric Vehicle in China Vibration Measurements of Steel Foot-Bridges Using Mobile-Phone DOM Products: Activation Energy Estimation and Reliability Assessment Immune-Based Algorithm for Power Economic Emission Dispatch Application of the Minimum Cut Sets of System Fault Based on OMA Chapter 7: Building Materials Mechanical Properties of Fiber Reinforced Self-Compacting Concrete Cheap Mix Design of the Rock-Filled Concrete Materials The Theoretical Research about the Piezoelectric Materials Generating Capacity on Road Influence of Mineral Admixtures on Corrosion Potential of Reinforced Concrete at Early Stage Research on Separation of Mixed Copper-Lead Concentrate Fine Aggregate Interference on Thermal Stability of Asphalt Mixture Research on the Mechanical Properties and Micro-Morphology of the Cement Stabilized Gravel with Rubber Particles Research on Asphalt Mixture Injury Digital Image Based on Enhancement and Segmentation Processing Technology Research on Bonding Strength of Steel and Concrete with Different Bonding Interfaces The Performance Evaluation of New Low Temperature early Strength Agent ZL-1 Model Research of Concrete Reinforcement Corrosion Mechanism and Corrosion Rate under the Corrosion of Chloride Ion Chapter 8: Civil Engineering The Dynamic Response Simulation Analysis of U-Shaped Metro Tunnel Predicting Model of Safe Distance between Tunnel and Karst Cave Stress Analysis and Strength Checking for High Pressure Gas Pipeline in the Earthquake Rupture Area Study of the Lighting of Entrance/Exit Segments of Urban Tunnels and Outside-Tunnel Roads Based on Visual Efficiency Theory Seismic Behavior of RC Columns With Corner Focus Longitudinal Bars Fire Resistance Performance of High-Strength Concrete Columns Reinforced with Pre-Stressed Wire Ropes Reliability Index Study of Asphalt Pavement Construction Based on Analytical Hierarchy Process Comparison Analysis of the Aggregate Contact Characteristics between Skeleton-Dense and Suspended-Dense Structure Asphalt Mixture Influence of Damping on Seismic Strength Reduction Factors: A Study Differentiated by Ground Motion Frequency Bandwidth Analysis on Nonlinear Curvature Deflection for Reinforced Concrete Two-Way Slabs under Uniformly Distributed Load Tunnel Strength and Excavation Effect under Different Stress Paths Review on Aquifer Structure Theory in Aquifer Layered Distribution Area Analysis on the Groundwater Control for Shallow Pedestrian Tunnel in Round Gravel Layer A Preliminary Survey of Factors Influencing Project Cost Estimating Practice in the Klang Valley of Malaysia Nonlinear Analysis of Bearing Capacity of Reinforced Concrete Structures Using Strip Method Study on Parameters of Grouting Reinforced Circle for Water-Rich and Soft Fault Fracture Zone in Tunnel Research on Measures of Restraining the Vertical Deformation of CRTSII Ballastless Track Slab as Filling Cement Asphalt Mortar Seismic Analysis of a Water Release Integrated Structure Part II: Time History Analysis of Service Bridge Pier Structure Seismic Analysis of a Water Release Integrated Structure Part I: Response Spectrum Analysis of Intake Tower Analysis on Consolidation and Settlement Characteristics of Composite Foundation with T-Shaped Bidirectional Soil-Cement Deep Mixing Columns Hemisphere-Shaped Iron Joint between PHC Pile and Steel Reinforced Concrete Column. Part II: Experiment Collapse Cause Analysis and Treatment Research of West Slope Tunnel Hemisphere-Shaped Iron Joint between PHC Pile and Steel Reinforced Concrete Column. Part I: Analysis Analysis of Stress Deformation Characteristics of Composite Geomembrane Rock-Fill Dam with Core Wall Analytical Study on Seismic Performance of Switchboard with Hybrid Spring Supports Supporting Design and Stability Analysis of a Subway Station's Main Body Tunneling Discussion of Method for Computing Temperature Load during Operation Period on High Arch Dam Test Research on Strengthening In-Service Damaged Truss with Prestressed Cable The Investigation of the Hall Loudness Evaluation Thermal Technical Assessment of Selected Constructions of Wooden Houses Trenchless Repair Technology and Application of Urban Sewer System Analyzing Method Based on the Average Power of the Input Energy into Sliding Isolation System Wind Resistant Design of Low-Rise Steel Buildings Nonlinear Static Pushover Analysis for Shear Wall Structures in SAP2000 Program A Study on the Estimation of Economic Loss Costs due to Seismic Damage of Low Rise Steel Structures Advance of Research of Unbonded Flexible Risers Development of Energy Finite Element Analysis in Vibration Analysis of Composite Laminate Plate Structures Chaotic Motion of Axial Loaded Beam Bridge Subjected to an Infinite Series of Moving Loads Heterogeneity of Rock Corroded by Acid Mine Drainage Based on Fractal Theory Damage Identification Method for Irregular Continuous Box Girder Bridge Based on RBF Neural Network Optimized by PSO Research on Static Performance of Composite Shear Wall with Insulation Layer Experimental Research on Hydration Heat Temperature of Concrete Box Girder in Low-Temperature Environment Experimental Study on the Effects of Water Content to Cement Soil The Determination and Performance Evalution of Slurry System in Haita Region Nonlinear Response of C/C Composite Laminated Panels with Temperature Gradients under Guassian Pressure Waves Research on Vibration Isolation and Thermal Insulation of the Polystyrene-Filled Sandwich Panel with Cross-Shaped Periodic Ribs Stability Analysis and Prediction of Slope on Complex Excavated Construction Site The Bearing Capacity of Agglomerated Wood Joints Wind Loadings on the Water Tank at Building Roof Top with Variant Installation Conditions Comparative Seismic Risk Analysis of Existing Low-Rise RC Buildings Retrofitted by Metallic Energy Dissipating Devices Damage Resistance Behaviors of CCF300/5428 under Various Impact Energies Experimental Research on Compression/Compression Fatigue Performance of Impacted Composite Laminates Key Components for RC Frame Structure during Progressive Collapse Model Test and Finite Element Analysis of Squeezed and Branch Pile Bared Vertical and Horizontal Loads Model Test on Negative Skin Friction for Super-Long Pile under Surcharge Load Considering Time Effect


Best Sellers


Product Details
  • ISBN-13: 9783037859612
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1144
  • Spine Width: 57 mm
  • Width: 170 mm
  • ISBN-10: 303785961X
  • Publisher Date: 27 Feb 2014
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 470 Applied Mechanics and Materials
  • Weight: 2100 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Mechanical Engineering, Materials Science and Civil Engineering II: (Volume 470 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Mechanical Engineering, Materials Science and Civil Engineering II: (Volume 470 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Mechanical Engineering, Materials Science and Civil Engineering II: (Volume 470 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!