Machinery Electronics and Control Engineering II
Home > Science, Technology & Agriculture > Electronics and communications engineering > Electronics engineering > Machinery Electronics and Control Engineering II: (Volumes 313-314 Applied Mechanics and Materials)
Machinery Electronics and Control Engineering II: (Volumes 313-314 Applied Mechanics and Materials)

Machinery Electronics and Control Engineering II: (Volumes 313-314 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 2012 2nd International Conference on Machinery Electronics and Control Engineering (ICMECE 2012), December 29-30, 2012, Jinan, Shandong, China. The papers are grouped as follows: Chapter 1: Advancements in Electrical Engineering and Electric Machines Applications; Chapter 2: Advanced Materials Engineering and Technology; Chapter 3: Elecrtonics and Integrated Circuits, Embedded Technology and Applications; Chapter 4: Intelligent Control Engineering and its Applications; Chapter 5: Measurements and Instrumentation Technologies; Chapter 6: Manufacturing and Industrial Engineering, Management Applications; Chapter 7: Power System and Energy Engineering: Its Applications; Chapter 8: Robotics and its Applications; Chapter 9: System Design, Modelling, Simulations and Optimization; Chapter 10: Data and Intelligent Information Processing: Its Applications; Chapter 11: Signal and Acoustics Acquisition and Processing; Chapter 12: Information Technologies and Networks: Its Applications.

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Advancements in Electrical Engineering and Electric Machines Applications The Study of Parameter Robustness of Induction Motor Variable Frequency Speed Regulation Adaptive Inverse Control System Finite Element Analysis and Experimental Study for MWD Hybrid Excitation Generator Research of Electric Radiator Design Based on DFMA Method A Modified Direct Torque Control Based Fuzzy Variable Structure of Permanent Magnet Synchronous Motor Design and Analysis of a New Permanent Magnet Actuator for Medium Voltage Vacuum Circuit Breakers Stator Temperature Distribution of AC Machine Based on Fluid Flow Field Research on Automatic Detection Method about Rotor Initial Position of Permanent Magnet Synchronous Motor Research on Characteristics of Cogging Torque of Permanent Magnet Synchronous Motor Based on Finite Element Method Modal Analysis of Stator and Rotor in Large Capacity Permanent Magnet Motor Torque Optimization of Double-Stator Switched Reluctance Machine Bridgeless SEPIC PFC Converter The Influence of Moment of Inertia to Induction Motor Rotation in Sensorless Direct Torque Control and Duty Ratio Design of Electric Closed Gearbox Comprehensive Test Bench Based on AC Generation Chapter 2: Advanced Materials Engineering and Technology Influence of Solution Heat Treatment Temperature and Time on the Microstructure and Mechanical Properties of Gas Induced Semi-Solid (GISS) 6061 Aluminum Alloy Evolution of the Coefficient of Dynamic Viscosity with Growing Damage in Metals Investigation of Microstructure and Mechanical Properties of Ultra High Strength Bainitic Steel Thermal Heating Effect on Structural and Mechanical Property of Diamond-Like Carbon Film Prepared by Filtered Cathodic Arc Oriented Reduced-Pressure Melts Growth of the Vacuum Ultraviolet Double Frequency Crystal KBe2BO3F2 An Experimental Investigation on the Bearing Failure Load of Multi-Pin Joints in Composite Laminates Structure and Lattice Expansion of Pure Sodium Confined inside Nanoporous Vycor Glass at Low Temperatures Tensile and Compressive Creep Behavior of Magnesium Alloy AZ91D Nano Colorful Cement Composite The Use of Porous Silicon for Nanostructuring of Functional Metal Layers for MEMS BCNO: Preparation and Microwave Absorbing Properties Effects of LiCF3SO3 on PVDF-HFP/MG49 (70/30) Based Blend Polymer Electrolyte Evidence of Phase Transition of Indium Doped Zinc Phthalocyanine The Properties of Al2O3 Films Deposited onto Al2O3-TiC and Si Substrates by RF Diode Sputtering Photocatalytic Reactions of Titanium Dioxide for Active Packaging Application Bolt Load Loss Behavior of Magnesium Alloy AZ91D Bolted Joints Clamped with Aluminum Alloy A5056 Bolt Exciton Dissociation at Indium Tin Oxide/Indium Doped Zinc Phthalocyanine Interface Hole Doping Through Indium Intercalation Into Nickel Phthalocyanine A Method of Die Surface Compensation after Spring Back Prediction in Sheet Metal Forming Deposition and Characterization of Chromium Doped Tin Oxide Transparent Conducting Thin Films Prepared by Spray Pyrolysis Technique Nano Geopolymer for Sustainable Concrete Using Fly Ash Synthesized by High Energy Ball Milling Mechanical Properties and Morphology of Palm Slag, Calcium Carbonate and Dolomite Filler in Brake Pad Composites Numerical Simulation of Mold Filling and Solidification Behavior in Permanente Casting Process Hydrothermal Synthesis of Diluted Magnetic Zn1-xMnxO Semiconductor Effects of Elements Composition on Tribological Properties of PES/Metal Matrix Composite Materials Morphologies of ZnO Crystals Synthesized by Hydrothermal Method Copper Nanowires on NaCl (110) Template Development of New Hybrid Shell Element Takinging the Normal Stress into Account Oil Film State between Friction Pair in Hydro-Viscous Drive A Way to Analyze Oil Damping Force of Electromagnetic Release with Oil Dashpot The Research on Certain Type of Starter Lead-Acid Battery Performance Test Used in Real Off-Road Vehicle Hierarchical Meso-Microporous SAPO-11 Synthesis from Acid Assistant Dealuminzation: Effect of Acid Strength The Effect of Thermal Heating on Corrosion Resistance of Diamond-Like Carbon Film Prepared by Filtered Cathodic Arc Thermal, Mechanical and Chemical Analyses of Rapid and Self-Cured Prepolymerized Polyurethane Coatings Electrooxidation of Methanol on Carbon Supported Gold Nanoparticles Sulfurization of Copper Indium Diselenide Synthetized by Sol-Gel Spin-Coating Method Preparation of Waterborne Graphite Conductive Coating and Study of Its Electromagnetic Shielding Performance Stability of Solid/Liquid Interface of Pb-80wt%Sn Alloy under Direct Current during Directional Solidification Correlation between EIS and Potential Distribution for Carbon Steel under Epoxy Coating Fine Tuning Magnetic Properties of FePt:C Thin Films by FePt UnderLayers Well to ERT Front-End Sensor-Based Design Production Experimental Study of Nanofluids Crystallize on Low Temperature Environment Effect of Ti and Zr Deoxidation Process on the Inclusions in Low Carbon Steel Current-Voltage and Capacitance-Voltage Characteristics of Pd Schottky Diodes Fabricated on ZnO Grown along Zn- and O-Faces Chapter 3: Elecrtonics and Integrated Circuits, Embedded Technology and Applications Fault Diagnosis of Analog Circuit Based on Multi-Test Points and Multi-Feature Information Research and Validation of ICs' TDDB Physics-of-Failure Model Design and Implementation of the Tightly-Coupled SINS / GPS Integrated Navigation System Based on FPGA for Target Missile A Novel Design of Traveling Wave Protection Device in EHV Transmission Lines Based-On ARM and FPGA Remote Assessment of Fruit Quality Based on Embedded Technology Implementation of Clock Synchronization in PTN Based on FPGA The Detection System of Adaptive Electrochemical Micro Electric Current The Design and Implementation of Micromouse Based on C8051F120 Circuit Design and Implementation for a Class of Hysteretic Systems The Design of Digital Direct Current Source Based on Nios II Design and Implementation of TPMS Tire Air Leakage Alarm Functionion Based on the SP370 Infinite 3D Cubic Lattices of Identical Resistors The Design of Governing System of DC Motor Based on EDA Technology Isolated High Step-Up DC-DC Converter with Zero-Voltage-Switching A Novel SHE Modulation Method for Modular Multilevel Converter (MMC) with Reduced Switching Frequency Chapter 4: Intelligent Control Engineering and its Applications Intelligent Traffic Control at Intersection Based upon Real-Time Vehicle Detection Improved Control Model for Relay Protective Settings Remote Control and its Application Practical Research on Predictive Fuzzy-PID Control in Reactor Temperature Control Soft Starting of Medium Voltage Induction Motors with Fuzzy PD Control A Novel Three-Phase Power Factor Correction with Digital Control Robust Tracking Control for 3 DOF Helicopter Based on Least Squares Support Vector Machine Mine Pump Control System Based on KJD30Z Industrial Control Computer The Direct Torque Control of Induction Motors in Hybrid Electric Vehicles Based on the AMEsim Design of Fuzzy-PID Controller for Ride Comfort Enhancement of a Half-Vehicle with Active Suspension System System Design of Digitally Controlled Constant Current Source Design of Heavy-Medium Coal Separation Automatic Control System Based on S7-300 PLC Research on Airbags Overturning Device due to the PID Closed-Loop Control Technology Research on the Flight Control for an Asymmetrical X-Quadrotor Indirect Adaptive Fuzzy Sliding Mode Control and Application to Tank Pressurization System The Design of Rolling Bearing Testing for some Missile Control System Based on C8051F021 Weighted Multiple Model Adaptive Control Based on ADRC Application of PLC in Intelligent Control of Heating Pipe Network Precisie PID Temperature Control Based on LabVIEW Design of Intelligent Control of DC Motor Stabilizing Gain Regions of PID Controller for Time Delay Systems Planar Tracking Control for Multiple Underactuated AUVs under Formation Constraint Based on the MATLAB Self-Tuning Fuzzy PID Controller Design The Study of Optimal Fuzzy PID-Smith Control Based on Genetic Algorithm Multi-Objective Disturbance Attenuation Control for T-S Fuzzy System with Hard Constraints Desired Compensation Adaptive Robust Control for NC Rotary Table Direct Drive Rotary Feeding System The Application Study of Temperature Control Strategy for Boiler Design of a Small Portable Wind/PV Hybrid Controller High Accuracy Attitude Regulation of Spacecraft Using Arm Motion Study on Control System for CS Mode of PHEV Based on State Space Description Method Experiment Study of the Single Point and Multi-Point Natural Gas Electronic Injection Systems Development and Application of Backplane-Type EtherCAT Slave Controller Research on Fuzzy Direct Torque Control System Based on Improved Grey Model Prediction The Key Technical Research on V2G System Effect of Reference Height Control System on CPG Networks for Quadruped Hopping Robot A Voltage Mode Control Maximum Power Point Tracking for Stand-Alone Photovoltaic System Comparison of Two Controllers PI and IP of the Voltage of a Two Inverters UPQC Finite-Time Control for Switched Discrete-Time System Remote Monitoring System for Direct Current Power Robust Tracking for BLDCM System Based on Unknown Differentiable Deadzone Nonlinearity Synchronous Control System for Envelope Machine Using DSP Automatic Spectrum Control System Design and Implementation for RGB Light Emitting Diode Fractional Order Controller Design for Ball and Beam System SCM Based High Precision Temperature Controller Design An Optimized Design for Inverted Pendulum System of Active Disturbance Rejection Control Based on Generic Algorithm Design of Auto-Stabilization Control Technique for a Quadrotor System Modeling and Delay-Dependent Stability Analysis of Multi-Sampling Rate MIMO Networked Control System with State Feedback Application of Direct Feedback Linearization Control for Permanent Magnet Synchronous Generator Based Wind Energy Conversion System Chapter 5: Measurements and Instrumentation Technologies Quantitative Analysis of LIBS Reduces the Matrix Effect Methods Automatic Temperature Measurement System of Accelerated Ageing Test for Fuse Study on the Accurate Measurement of Film Thickness Application in Meta-Evaluation of Weapon Quality Based on Evidence Theory of Weight Interaction of Laser Energy with Bow Shock in Mach 5 Flow Thermoelastic Damping of the Axisymmetric Vibration of Laminated Trilayered Circular Plate Resonators A Direct Measurement System to Estimate Gas Content in Coal Mechanical Analysis of Outer Sleave for Electronic Pressure Meter Gravity Pendulum Tilting Monitor Monitor and Cut Technology of Anomaly Flow for Gas Meter Design and Analysis of High-Tension Lines De-Icing Device Vertical Analysis Based on the Fault Data of Running Smart Meter Predicting the Smart Meters Life Cycle Based on the Analysis of Correlation Coefficient A Study on Beam Shaping of Helix Antenna Research on Calibration of Semiconductor DC Tiny Current Source Single-Axis Rotation Modulation of SINS Testing Effective and Maximum Torque for the Metal Material Coupled by Interference Fit The Application of Pseudo-Random Sequence in the Properties Measurement of Polymer Optical Fiber The Indexing Precision Testing Techniques of Power Tool Rest Cutter Head Experimental Study on the Frictional Resistance of Gas Flow in Vertical Helically Coiled Pipe Design and Simulation of Pressure Sensor for Ocean Depth Measurements Chapter 6: Manufacturing and Industrial Engineering, Management Applications Study on Processing Optimization in Ultrasonic-Assisted Grinding of SiCp/Al Thin-Walled Workpiece New Industrial Shape Detecting Equipment of Cold Strip Dynamic Elasto-Plastic Analysis of 300m Span and 0.15 Rise-Span Ratio Arch Truss by Ninghe Wave Research on Dynamic Scheduling Technology in Job Shop with Tool Flow Study on Design and Application of a Manufacturing Process Management System of Large Sized Structure Components in Construction Machinery Effect of Intercritical Annealing Temperature on Development of Cold Rolled Dual Phase Steel from Q345 Steel Application of Physics-of-Failure Method in Reliability Engineering of Electronic Products The Application of Particle Motion Equation in Coal Handling System of Dissipation Dust Law Effects on Error of the Component Power Flow by Mounting Deviation in Pipes Study and Application on Ultrasonical Combined Electrical Micro-Machining the Special Shape Micro-Structures The Study of Prognostics and Health Management for the Air Cooling Equipments Based on FMA and Life Test The Finite Element Analysis of Reinforcement Shearing Ways and Means of Improving the Quality of Drill Pipe Connections Evaluation on Effectiveness of Weapon Equipment Based on Grade Conversion Operations Novel Emitter-Segmented Power HBT with 2-D Non-Uniform Segment Spacing for High Thermal Stability Dynamics Analysis of Break Disc Based on FEA and Modal Experiment The Calculation of the Reproducibility Error in the Technological System with the Clamp on the Gas Power Application of the Rainbow Schlieren Method in Free Underexpanded Jets Finite Element Analysis on Thermal Characteristic of a High Precision Turning Center’s Headstock Study on the Comprehensive Program of Heat Pump Technology Recycling Thermal Power Plants Circulating Water Heat Failure Mode and Effects Analysis of Equipment Based on Grey Theory Experimental Research on Heat Resistances of Vertical Evaportive Condenser Measure and Analyze the Problems of Concrete Mixture Production via Six Sigma DMAIC Tools: Central Concrete Mix Plant as a Case Study Pipeline Vibration Analysis and Control for the First Booster of Ethylene Electrical Discharge Dressing Metal-Bonded Diamond Grinding Wheels with Misted Emulsion Chapter 7: Power System and Energy Engineering: Its Applications Analysis of Dynamic Characteristics of 1.5 MW Wind Turbine Tower Prototype Design of Rectifier Transformer for High Power Density Grid-Connected Inverter with Harmonic Compensation for Distributed Power System Parametrical Finite Element Modeling of Overhead Transmission Line-Towers System Maximum Wind Power Tracking Strategy of Wind Power Generation System Wind Power System Optimization Control Simulation Hierarchical Structural Model of AC/DC Power Systems Research and Design of a Power-Balance Controller in Stand-Alone Wind Power Generation System Research and Application of Wind-Solar Hybrid Power Supply System in Environmental Monitoring System Power Characteristic Analysis and Optimization of Point Absorber Wave Energy Converter Newton-Homotopy Algorithm of Ill-Conditioned Load-Flow Rapid Structure Analysis Method of Multi-Segment & Variable Taper Conical Wind Turbine Tower DC Bus Instability Driving by Photovoltaic Source with Constant Power Load Improvement of the Electric Energy Quality While Using a Super-Compensator A Study on the Impact of Microgrid Stability Containing Distributed Power Bees Two-Hive Algorithm for Optimal Power Flow Cascading of Diode Clamped Multilevel Inverter Boosters for High Voltage Applications Simulation of Temperature Distribution in Current Transformers with Current Flow New Method to Identify Transformer Inrush Current Based on FFT and SVM Comparison of Monitor Types in Personal Computer Set on Electrical Energy Saving and Side Effect on Power Quality Optimal Location of UPFC with ATC Calculation Chapter 8: Robotics and its Applications Cooperative Object Transportation Using Connected Robots An Efficient Path Replanning Technique for EST-Based Robot Navigation in Dynamic Environments Advanced Waste Rock Exploring by Mobile Robot Collision-Free Multi-Robot Navigation Using Autonomous Object Selection Makespan Prediction Algorithm for Dedicated Robots Task Allocation A Study on the PUMA560 Robot Motion in ADAMS/View Sliding Mode Path Tracking Control for Spraying Mobile Robots Based on Weighed Integral Gain Reaching Law Kinematics Analysis for a 4-DOF Palletizing Robot Manipulator EKF-Based 6D SLAM for Air-Duct Cleaning Robot Using Inertial Sensor and Stereo Vision The Closed Method of Solving in Inverse Solution of Position in Delta Parallel Mechanism A Toy Robot via Cam Design as a Balance Module of Gravity Shifting Chapter 9: System Design, Modelling, Simulations and Optimization Finite Element Simulation of In-Service Sleeve Repair Welding of Gas Pipelines Nonlinear Mathematical Modelling of Servo Pneumatic Positioning System Modeling of Q – V Diagram Using SPICE for Electrostatic MEMS Converter Found in Energy Scavenging Systems The Development of Simulation Tools for Design of Waveguide Filter Using Resonant Iris Circuit Modeling and System Identification using Extended Kalman Filter for a Quadrotor System A New Approach for Stabilization of Switched Discrete Linear Systems An Interactive System for Concurrent Engineering Design Modeling of Flight Arrival Scheduling Based on Fuzzy Programming Parametric Modeling Technology for Transmission Line Towers Fractal Analysis of Raceway Boundary in Blast Furnace Model Satisfaction Evaluation Model of Bus Rapid Transits Service STD Mapping Model Designing Based on Layered Mapping Theory Research on the Mathematical Model of the Double Wishbone Independent Suspension Analysis of Strain-Stress of Cubic Hinge Sleeve Optimized Design of Induction Cooker by Numerical Computation and Experimental Investigation Numerical Study of Frictional Resistance in Vertical Helically Coiled Pipe Comparative Study on Heat Transfer Characteristics of Three Kinds of Micro-Groove HEAT Pipes Finite Element Analysis and Optimization of the Truss of Installing Wave-Maker Based on ANSYS Modeling of the Three-Phase Asynchronous Motor Based on MATLAB/Simulink Computation and Comparison of Dynamic Viscosity Based on Quasi-Static and Dynamic FEM Analysis for AL7050-T7451 Indirect Optimization for Finite-Thrust Orbital Interception Problem The Motion Analysis on Lunge Material Mechanism in Sewing Machine Improvement and Simulation Analysis of Threshold Denoising Algorithm Three-Channel Control for the Depth of AUV and its Dynamic Performance Simulation PNAVSIM: A Numerical Simulation Package for Pulsar Navigation Design of Powertrain Parameters and Simulation of Electric Power-Assisted Hybrid Electric Vehicle Simulation on the Burden Distribution by DEM Research of Control and Calibration Method on Laser Simulator for Optoelectronic Confrontation HWIL Simulation System The Research and Simulation for Control Method of Active Power Filter Vehicle Clutch Dynamic Simulation Based on Matlab/Simulink System of Greenhouse Temperature and Humidity Monitoring Based on LabVIEW Simulation Study on Travel-Driven System of HST Loader with Matlab/Simulink The Simulation Analysis of Harmonics in Typical Rectification Circuit The Control Simulation of Parallel Hybrid Power Unit A Strong Tracking Cubature Kalman Filter for Nonlinear Estimation Dynamic Simulation Analysis of Belt Rupture for Belt Conveyor Simulation of the Integrated ABS and DYC Control for 4WID Electric Vehicle with Regenerative Braking Defect Free Casting by Using Simulation Software Design of a New Five-Axis Linkage CNC Machining Center Design and Analysis of Nonlinear Autopilot for Tactical Missile A Design Reuse Process in Reduction the Low Yield Rate for Display Panel Calculation Model of Exergy Cost Based on Thermoeconomics Structure Theory and Thermoeconomics Accounting Mode Chapter 10: Data and Intelligent Information Processing: Its Applications Application of Differential Transform Method to Buckling Problems at Pined-Pined Boundary Conditions Design of Precision Breeding System for Pigs Based on DDE The Design of a Data Acquisition System for Wave Energy Conversion Efficiency Measurement System Based on the Serial Communication The Extraction of Differential MFCC Based on EMD The Precision Breeding System of Pig Based on RFID A Study on GDOP for Vector-Based Tracking Loop GPS/INS Receiver The Design of Elevator Monitoring Terminal Based on the GPRS Delay-Dependent Stability Criteria for Time-Delayed Systems A Speed-Up Way of Template Matching Using Normalized Cross-Correlation Dynamic Obstacle Detection Using Visually Informed Scan Matching An Iris Image Acquisition Method Based on Embedded System Positive Solutions for Nonlinear Lidstone Boundary Value Problems Method of Forecast Wind Speed Based on Wavelet Analysis and Quantile Regression Stress Analysis for Electric Stop Valve of Nuclear Power Plant Considering Action of Preload and Stem Force QCSP Based Schedulability Test of Real-Time System Chapter 11: Signal and Acoustics Acquisition and Processing A Method for Extracting Characteristic Frequency Components of Blood Flow Signals Based on Wavelet Transform Pipeline Leak Detection Based on Double Sensor Negative Pressure Wave Space-Time Adaptive Processing Used for Underwater LFM and CW Short-Term Noise and the Robustness of Two Log-Periodogram Estimators in Long Memory Series Research on Fault Diagnosis Methods for Mixed-Signal Circuits The Research Methodology of AR Spectrum Estimation to Stepped-Frequency Signal Processing Research of the Best Receive Principle Based the Binary Knowing Signal Based on the Max038 Digital Function Signal Generator Design Time Series Preprocessing and Forecasting Based on EMD An Arc Fault Current Interrupter Based on Wavelet Transformation Reliable Sample and Order-Based Repeatable Analysis of Unstable Signal of Automobile Transmission Study on Acoustic Emission and Power Signals in Precision Cylindrical Plunge Grinding Performance Improvement of Digital Phase Locked Loop Algorithm Using all Pass Filter and Low Pass Filter for Grid Connected Inverter Reference Research on Interpolation Algorithm for DSSS Signal Receiver Research on Coal and Gangue Identification Method Based on Infrared Thermal Wave Detection Connected Stability Analysis of Delay Systems via the Matrix-Valued Lyapunov Function Analysis of Acoustic Radiation of Submerged Damped Cylindrical Shell Combined with Thin Shell Theory and Elasticity Theory Active Control of Sound Radiation Into an Enclosure Using Different Number of Actuators A New Algorithm of Phase to Ground Fault Location for Electric Power Feeder Hardware-Software Complex of Transfer Analysis Features of NDT Objects Research of Special Form for Analysis Properties in Transmit Channels of NDT System Chapter 12: Information Technologies and Networks: Its Applications Adaptive Predict Control of Nonlinear System Based on a Modified Neural Network Distribution Network Restoration Reconfiguration Based on an PSO-ACO Hybrid Approach Technology Development and New Issues of Distribution Automation in Smart Grid On the Simplification of Data Based on Standard MODBUS Protocol Design of Network Adapter Compatible OCP for High-Throughput NOC The Application of Global Forecast Function in the Power System Load Forecasting Software Development A MATLAB-Based Study on Approximation Performances of Improved Algorithms of Typical BP Neural Networks The Future Manufacturing System and Cloud Computing Design and Implementation of Hybrid Micro Energy Harvester for Autonomous WSN Components Design of Software for High-Speed Inkjet-Printing System Based on Distributed Research of FPGA Based LXI Bus Clock Synchronization Technology A New Method of Distribution Network Fault Location Vehicle Type Recognition Using in Geomagnetic Data Based on Neural Network A Novel Architecture for Civil Aviation Aircraft Intelligent Landing Using Dual Fuzzy Neural Network Based on the BP Neural Network VAc Synthesis Reactor in Temperature Control The Horizontal and Vertical Screen to Switch the Display Based on the Android


Best Sellers


Product Details
  • ISBN-13: 9783037856840
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1472
  • Spine Width: 74 mm
  • Width: 170 mm
  • ISBN-10: 303785684X
  • Publisher Date: 05 Jun 2013
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 313-314 Applied Mechanics and Materials
  • Weight: 200 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Machinery Electronics and Control Engineering II: (Volumes 313-314 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Machinery Electronics and Control Engineering II: (Volumes 313-314 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Machinery Electronics and Control Engineering II: (Volumes 313-314 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!