Environmental and Materials Engineering
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Environmental and Materials Engineering: (Volume 664 Advanced Materials Research)
Environmental and Materials Engineering: (Volume 664 Advanced Materials Research)

Environmental and Materials Engineering: (Volume 664 Advanced Materials Research)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Selected, peer reviewed papers from the 2012 International Conference on Environmental and Materials Engineering (EME 2012), December 9-10, 2012, Seoul, South Korea. The 220 papers are grouped into the following chapters: Chapter 1: Environmental Science and Engineering; Chapter 2: Material Science and Materials Processing; Chapter 3: General Mechanical Engineering; Chapter 4: Automation, Control, Information and Computer Technologies; Chapter 5: Management and Industrial Engineering.

Table of Contents:
Preface and Committee Chapter 1: Environmental Science and Engineering Ecological Industry Chain Project Decision Study Based on Price View Pricing Decision Study of Ecological Industry Chain Based on Uncertain Demand Experiment and Practice on the Wastewater Treatment in Tunnel Construction Processing Environmental Productivity Growth in Chinese Construction Industry Determination and Comparison of Microbial Biomass Carbon in the Rhizosphere Soil of Different Plants Identification of Yangtze River and Yellow River Paleochannels in South Yellow Sea Shelf A New and Reproducible Surface-Enhanced Resonance Raman Scattering Method for the Determination of Trace Au(III) in Solution Using 4-Mercaptopyridine as Molecular Probe Research on Green Supply Chain Management and Enterprise’s Green Degree Evaluation Model Evaluation of the Acoustic Environment of a Neighborhood and Application of the DPSIR Variations of Soil Organic Matter and Nutrients in Degenerated Wetland in Response to Ecological Restoration in Shuangtaizi Estuary, Northeast China Enrichment Characteristics of Cadmium and Lead in Wheat at Different Growth Stages The Groups and Distribution Characteristics of Fine Organic Autotrophic Particles in a Subtropical Reservoir Using Flow Cytometry Study on the Characteristics of Anthropogenic Landscapes Process in Different Urbanization Stages The Effect of pH Value on the Polycyclic Aromatic Hydrocarbons Degradation in Sludge during Biological Aerobic Fermentation Process Harmonious Development of Packaging with Environment in China Effects of Ecological Spur Dikes on Spring Phytoplankton in Wangyu River Purifying Effects of Nitrogen in Wangyu River Water through Natural Wetlands Near Surface Research and Excitation Horizon Prediction Based on Old River Course of Xiaoqing River in Shan Dong Characteristics of Atmospheric Polycyclic Aromatic Hydrocarbons (PAHs) in Gas and Particle Phase in April and July 2011 in Beijing, China Estimation of Lead Releasing Characteristics in Contaminated Agricultural Soils by Chelating Agents Effect of Aeration Rate on the Hydrolysis and Acidification of Waste Activated Sludge in Thermophilic Aerobic Conditions Research on the Management Pattern of Small Watershed Treatment in Loess Plateau Region Environmental Sustainability and Green Supply Chain Management Evaluation on Ecological Security of Land Resources Performance of MR-deDuster: A Case Study of a Palm Oil Mill Plant Research and Assessment on Heavy Metal Contamination of Soils in Four Mining Areas of Enshi City Variations and Typical Impact Factors of Soil Nitrogen Content during the Vegetation Succession in Limestone Mountains Research on Energy-Saving and Emission-Reduction Based on Factor Analysis for Poyang Lake Ecological Economic Region Effect of Deicing Salt on Catalase Activity and Malondialdehyde Contents in Gills and Muscle Tissues of Zebrafish (Danio rerio) Application of Water Resources System Analysis Method in Optimal Allocation of Water Resources Analysis of the Relationship between River Flow and Water Quality before and after the Wenchuan Earthquake The Environmental Sanitation Issues and Management Strategies of Xi’an Urban Village The Designment of Environmental Impact Assessment System of Offshore Oil Spill with ArcGIS Engine Study of Solid Waste Management Programs in Shiraz-Iran Evaluation of the Structure of Industrial Wastes Effect of Pantograph and Bogie on Interior Noise of High-Speed Train in Tunnel The Application of Support Vector Regression Models which Based on MATLAB on the Simulation of Wastewater Treatment Plant The Study of Influence of Different 7-ACA Concentration of Pharmaceutical Wastewater on Microbial Activity of Activated Sludge Indoor Environment Quality in Modern Life Three Dimensional Dynamic Monitoring Model of Groundwater Resources in Jiao Nan Feng He River Basin The Basic Principles of the Rural Village Wetland Sewage Treatment System in Wuhan Preliminary Observation of Plankton in the Rural Village Wetland Sewage Treatment System Washing of the Ash from One Shanghai Plant Using Phosphoric Acid Analysis of the Ash from One Shanghai Plant Using XRD (X-Ray Diffraction) Introduction to Solid Waste Pollution Control and Improvement Suggestions for Construction of Chinese Green Barrier Changes in the Electrochemical Behavior of a Redox Mediator in the Presence of Humic Fractions The Related Research about the Thickness of Covered Soil in Reclaimed Land Filled by Fly Ash How to Deal with the General Wastes of Chemical Laboratory Influence of Substrate Type on the Attachment of Cladophora glomerata (L.) Kütz Technical and Economic Analysis of Supercritical Water Oxidation and Biochemical Process for Lurgi Coal Gasification Wastewater Treatment Using Cloud Model to Improve the Membership Function in Fuzzy Risk Assessment of Reservoir-Induced Seismicity Production, Potential and Challenges of Crop Straw in Anhui Province, China New Explanations to Law of Resource Utilization Discussion on the Sediment Internal Pollution and its Countermeasures of Nansi Lake Time Concept Definition of Depth Space Theory Ontology-Based Wastewater Best Management Practices Recommendation Adsorption Characteristics of Ammonium Nitrogen by Biochar from Diverse Origins in Water Testing, Investigation and Improvement on Formaldehyde in Decoration Housing Laboratory Study on the Toxic Gas Treatment and Wastewater Reuse in Nitromethane Synthesis Plants Methylene Blue Adsorption by Synthetic Nano-Carbon-Hydroxylapatite Post-Traumatic Psychological Resilience in an Eco-Psychology Perspective Carbon Emissions of Quanzhou's Textile Enterprises and Tax Policy A Survey on Abrupt Environmental Pollution Accidents in China from 2000 to 2010 The Study on the Indicator System for Strategic Environmental Assessment The Research Methods Based on Emergy Theory of the Value of Natural Capital Research on Recycling Management Model for Traction Batteries of Electric Vehicles Research on Management Innovation for Ecological Security in China’s Forest Tourism Areas Research on Metal Ion Removal of Ceramic Printing Wastewater Research on Impregnated Ruthenium Catalyst of Simulation Printing and Dyeing Wastewater Treatment with CWAO Method Optimization of Operating Conditions on Ceramic Printing Wastewater Treatment with Coagulation and Sedimentation Method Research on the Change of Energy in the Process of the Micro Bubble Formation with Dissolved Air Method Applications of GIS in the Border Defense Teaching A GIS-Based Early Warning and Emergency Decision Support System for River Heavy Metal Pollution Incidents ASTER Spectral Analysis and Lithologic Mapping in Bangong Suture, Tibet, China Environmentally Assessing Buildings Characterized by Complex Shape and Innovative Materials The Analysis of Changsha Spatial Self-Organizing Mechanism in the Period of Republic of China The Interpretation of Place Phenomenology Based on Space Syntax Theory A Geographical Penetration into Urban Cohesion of Xiamen and Zhangzhou Chapter 2: Material Science and Materials Processing Relationship between X-Ray Relative Diffraction Intensity and Integral Sensitivity of GaAlAs/GaAs Photocathode Research Progress in Sequences Comparison and Crystal Structure of Silk Fibroin Effect of NaCl on Synthesis of Si-SiC Nanocomposites by Self Propagating High Temperature Synthesis Removal of Ammonia Nitrogen by Combining the Ammonia Stripping with Electrochemical Oxidation Electrochemical Degradation of Phenol by the Nanographite and Foam-Ni Composite Cathode Preparation and Characterization of Paste-Printed CIGSe Absorber Layers Sintered with 10% Tellurium or 5% Antimony Sulfide as a Sintering Aid Acute Aquatic Toxicity of Brominated Flame Retardants Decabromodiphenyl Ether (decaBDE) on Scenedesmus obliqnus Research on XX Fe Based Alloy Prepared by Air Induction Melting The Influence of Smelting Process on the Quality of XX Fe Based Alloy Quantification of Asphalt Concrete Aggregate Shape with Fourier Analysis Multi-Criteria Analysis of Material Compositions of External Walls PEEK Polymer Nonmetallic Materials Replace Research in Drillable Metal Bridge Plug Effects of Material Properties for Non-Equilibrium Conditions in Induction Heating Process Impacts of Trace Elements Iron and Zinc on Phytoavailability of Heavy Metals Cadmium and Lead Synthesis of Carbon Black/Platinum Composite Materials as Catalytic Electrodes Prepared by Electrophoretic Deposition Study of Preparation, Characterization and Temperature-Programmed Reduction of NiO-ZnO Binary Materials The Rotational Extrusion Alloying Comparison of Hot Gas and Hot Plate Welding of Wood–Plastic Composites Research on Paste-Like Impregnation Coatings for Protecting Concrete Effect of Montmorillonite Content on Nucleation of Polypropylene Mechanical and Electrical Properties of Natural Rubber/Carbon Nanotube Nanocomposites Prepared by Latex Compounding Sub-Terahertz Quasi-Optical Reflectometer for CFRP Surface Inspection Morphology of TiC Reinforced Ni-Cr-Mo Composite Coatings Prepared by CO2 Laser Catalytic Dechlorination of Monochloroacetic Acid by Film–Supported Pd/Fe Bimetallic Nanoparticles Pd/Fe Nanoparticles as Catalytic Reductant Immobilized in Hydrophilized PVDF Membrane to Dechlorinate Monochloroacetic Acid Effects of Surface Treatment on Adhesion of Silver Film on Glass Substrate Fabricated by Electroless Plating Synthesis of Carbon-Sphere@TiO2/Cu Core-Shell Composites and the Studies on their Photocatalytic and Antibacterial Properties Microstructure and Properties of Plasma Arc Welding with Depth Penetration Keyhole SAF 2205 Duplex Stainless Steel Experimental Study on End Milling of C/C Composite Thermal Degradation and Microhardness Analysis of Polyene with Modified Oil Resin Synthesis and Field Emission Properties of Diamond Microcrystalline-Aggregate Array Thermal Characterisation of Thermoset Polyester Resin Filled Recycle Expanded Polystyrene Composite with Aerogel and Alumina Additives Low Temperature Synthesis and Characterization of Flower-Like ZnO Nanostructures Preparation and Desorption Performance of Gelatin Microspheres Study on the Local Structure of PAN-Based Carbon Fiber Using Radial Distribution Function Based on XRD Phase Composition and Morphology of Pottery Stone Microcrystalline Powders Synthesized by Hydrothermal Method Kinetic Indentation Application to Determine Contact Characteristics of Sphere and Elastoplastic Half-Space Transformer Mineral Oil Mixtures Characterization by Isothermal Charging Currents Sewage Sludge as Raw-Material in Asphalt Mixtures Poly(Lactic Acid)/Poly(Butylene Succinate) Blends Filled with Epoxy Functionalised Polymeric Chain Extender Crushing Behavior of Hybrid Foam-Filled Pultruded Composite under Quasi-Static Oblique Loading Control over Dispersion Efficiency of Nano-Size Zno Particles in Aqueous Medium: Correlation between Dispersant Molecular Weight and Particle Size Photocatalytic Activity of Mixed Phase TiO2 from Microwave-Assisted Synthesis Joining Active Metals with Al2O3 by Use of Solders First-Principles Calculations of Elastic Properties of HoBi and ErBi The Effect of Glycidyl Silane as Coupling Agent in Intumescent Flame Retardant System Solidification/Stabilization of Heavy Metals by Magnesium Potassium Phosphate Cement Preparation and Visible Light Activity of Co-Doped Mesoporous TiO2 Photocatalyst Experimental Verification and Design of Glass-FRP Composite Grids Preparation of Biodegradable Polymer Blended of Poly(L-Lactic Acid)/Cellulose Acetate Films in the Solvent Mixture Multi-Parameter Linear Regression Analysis about the Experimental Results of Pervious Concrete Strength Experimental Study of the Seepage Deformation of Cement-Soil Optical Imaging and Display by Using Two Dimensional Photonic Crystals Slab Laser Cladding of TiN-Based Coating on 00Cr13Ni4Mo Hydro Turbine Blade Stainless Steel for Improvement of Wear Resistance A SERRS Method for Coomassie Brilliant Blue Using Nanogold Aggregation Sol as Sunstrate Resonance Rayleigh Scattering Spectra Property of Selenium Nanoparticles and its Analytical Application A Nanosilver Resonance Rayleigh Scattering Method for the Determination of Trace Cysteine Fluorescence Determination of ClO2 with CdTe Dots Resonance Rayleigh Scattering Effect of Immunonanosilver Aggreagations and its Application to Rapid Determination of Trace Hg(II) Effect of Heat Treatment on Microstructure and Mechanical Property of 30Si2MnCrMoV Welded Joint Relation of Microstructure and Unconfined Compression Strength of Soil Stabilized with TerraZyme Effect of Euphorbia Coagulum on Flexural Property of Polyester Banana Fiber Composite Comparative Analysis of the Surface Functionalization and Texturization of HDPE after H2 and O2 Ion Plasma Immersion Effects of Surface Roughness and Chemical Species on Hydrophilicity of Anodized Film on Ti-6Al-4V Formed at a Low Current Density Preparation and Characterizations of Novel Ultrafiltration Membranes from Sulfonated Poly (Arylene Ether Sulfone)s Research Methods of Catalytic Oxidation on Methane in Conversion Process The Research of Compressor Oil Used on Filling Supercritical Sulfur Dioxide A Kw-Scale Integrated System for On-Demand Hydrogen Generation Using NaBH4 Solution and a Low-Cost Catalyst Hydrothermal Synthesis of Analcime from Local Pottery Stone Design of the Tool for End Electrical Discharge Milling and Mechanical Grinding Compound Machining of Engineering Ceramics Effects of Laser Cutting Main Parameters on Microhardness and Microstructure Changes of Stainless Steel Experimental Study on GH3536 Surface Discharge Mark Diameter of EDG The Crack-Tip Higher Order Field of Power-Law FGMs Plates with Reissner’s Effect for Crack Parallel to Material Property Gradient The Multivariate Nonlinear Regression Model of Zincificated Steel Resistance Spot Technical Development of Hybrid Rapid Tooling Technology Development of a High Efficiency Degassing System for Making Silicone Rubber Mold The Higher Order Crack Tip Fields for Physical Weak-- Discontinuous Crack of FGM Plate with Reissner’s Effect Chapter 3: General Mechanical Engineering Research on the Method of Determining Aircraft Spare Parts Thermal Field Analysis of Matrix Heating System on Thermoforming Machine Flow and Heat Transfer of Nanofluids near a Rotating Disk Temperature Evolution in High Frequency Mechanical Loading Simulation and Optimization Research of Multi-Stud Tensioning Machine Controlled by Servo Valve Investigation of Wide Range of Flow around Circular Cylinder Using Turbulence Model Effect of Skin Depth on Hardness Profile of Gear Heated by Induction Using 2D Model Robot Coordination Based on Biologically Inspired Methods Exoskeleton Finger Rehabilitation Robot Dynamics Simulation Analysis Time-Frequency Analysis Combining Wavelets and the Envelope Technique for Fault Identification in Rotary Machines An Integrated Modeling Approach for ANN-Based Real-Time Thermal Error Compensation on a CNC Turning Center Numerical Simulation on the Working Process of a Lean Burn Natural Gas Engine Improvement of Air Supply Pressure Product Calibration Model Effects of Exhaust Gas Recirculation on Particulate Morphology from a Diesel Engine Performance Study of Cooling Pads Research on Port Construction Technique after Water Storage of the Three Gorges Project Improving Safety Management Efficiency in Large-Scaled Construction Company through Questionnaire Survey The Influence of Ion Energy Distribution for Multiple Frequencies Driven Present Situation of Research on Coal Mining Subsidence under Highway in China Diagnosis and Transformation of Air Conditioning and Refrigeration System for a Shopping Mall Experimental Study of Cable Fire Spread in Electronic Cabinet The Corpuscular Method Application in OOP Child Constraint System Research and Simulation An Experimental Study on Ultimate Behaviors of Double Shear Bolted Connections with Ferritic Stainless Steel Steel Electrodes Shape Influence on the Critical Field to Breakdown in Air – Application to High Voltage Safe Approach Distances Calculation Bilayer Structure Based Surface Acoustic Wave Sensor for Formaldehyde Detection Numerical Simulation of Gradient Heat Treatment Process of Cylinder Welding Component of 30Si2MnCrMoV Steel Research on the Selection of Materials as Oil and Water Separating Membrane for Underwater Oil Tanks Experimental Research on Performance Optimization of Solar-Air Source Heat Pump Water Heater Constant Temperature Control of Solar Thermal Power Plant at Transient Variation of Sunlight Analysis into Abnormal Factors Affecting the Ash Discharge Amount of Thermal Power Plant Chapter 4: Automation, Control, Information and Computer Technologies On the Research of Internet Equipment Naming Methods Insight into TCB Issues for Information Security Framework, Design and Simulation of a Cyber-Physical System for Public Security Applications Solar LED Street Light Control System for Wireless Sensor Networks Based on ZigBee American Universities Information Security Management System and Enlightenment Design and Implementation of a Remote-Based Journaling File System Based on False Parallax Variable Block-Size Stereo Image Coding Method Web Based Management Information System Development and Design – By the Old and the New System of Rural Society Endowment Insurance Connection as an Example The Exploration of Data Mining in Face of Cloud Computing Real Time Modeling and Rendering of 3D Tree A Novel Security Architecture for Peer-to-Peer IMS System Development of Automatic Test System of Rig Comprehensive Performance A Home Automation Application Based on WSN and Service Robot Inspection System for Position of Frame Line in the Mould Based on Machine Vision Methods & Algorithms in Manufacturing and Assembly Industry Scheduling for Flexible Manufacturing System Video Monitoring of a Mite in Honeybee Cells A Novel Legal Expert Based on Dynamic Fuzzy System in Manipulating Property Division upon Divorce Analysis of Aircraft Path Planning Optimal on Carrier Flight Deck Study on Energy-Saving Technology of Fluorescent Lamp Physical Classroom System "Human - Human" Interactive Equipment Design Chapter 5: Management and Industrial Engineering Decisions on Industry Location and Market Capacities in Latvia Study on Evaluation Method of Regional Financial Ecoenvironment Social Capital and Organizational Performance: Exploring the Role of External Environment Evaluation Theory and Application of Logistics Enterprise Customer Satisfaction Degree The Research on the Coordinate Development of the Renewable Resource Industry Chain Systems Based on Multi-Level Hierarchical Structure Does Energy Constraint Facilitate the Japanese Technical Change? Performance Evaluation of Energy Saving and Emission Reduction Study on the Measures of Production Safety Accident Prevention and Control A Study on Three-Dimensional Modeling Method in Product Design Process Based on Pro/E The New Methodology of Working Load Classification in Engineering Operations Design Mechanism on Dynamic Incentive Machnism Considering Special Talents of the Manager Research on the Integrated Support Reliability of Modern Military Equipment The Potential and Cost Analysis of Emission Reduction in China’s Cement Sector Heat Transfer Technology for Textile Workshop


Best Sellers


Product Details
  • ISBN-13: 9783037856017
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1256
  • Spine Width: 63 mm
  • Width: 170 mm
  • ISBN-10: 3037856017
  • Publisher Date: 17 Apr 2013
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 664 Advanced Materials Research
  • Weight: 200 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Environmental and Materials Engineering: (Volume 664 Advanced Materials Research)
Trans Tech Publications Ltd -
Environmental and Materials Engineering: (Volume 664 Advanced Materials Research)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Environmental and Materials Engineering: (Volume 664 Advanced Materials Research)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!