Buy Advanced Technology for Manufacturing Systems and Industry
close menu
Bookswagon
search
My Account
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Technology for Manufacturing Systems and Industry: (Volumes 236-237 Applied Mechanics and Materials)
Advanced Technology for Manufacturing Systems and Industry: (Volumes 236-237 Applied Mechanics and Materials)

Advanced Technology for Manufacturing Systems and Industry: (Volumes 236-237 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

The 3rd International Conference on Information Technology for Manufacturing Systems (ITMS 2012) was held on the 8 and 9th September 2012 in Qingdao, China. It was intended to bring together researchers and engineers/technologists working on various aspects of materials, mechanical, electronic, computer, information and other topics.



Table of Contents:
  • Preface and Organizing Committees
  • Chapter 1: Material Science Technology
  • Effect of Rotating Electromagnetic Field on Corrosion Behavior of CuNi10Fe1Mn Alloy Tube Billet
  • Effects of Sintering Route and Flux on the Luminescence and Morphology of YAG: Ce Phosphors for White Emitting-Light Diodes (LEDs)
  • Finite Element Modeling Method of 3D Braided Composites Based on ICT Technique
  • Synthesis and Performance of a Modified Polyether-Type Superplastizer by Hydroxypropylmethyl Cellulose
  • Vacuum Brazing of Inconel 718 to Waspaloy Superalloy Using BNi2 Brazing Filler
  • Effects of Nano-Particles on Properties of Electronic Solders
  • Experimental Investigation on Fatigue Property of Asphalt Concrete Modified by Diatomite-Glass Fibers
  • Numerical Analysis of Ferrofluid Based Leaning Sensor
  • Stress Distribution in Reverse-Bent Bonded Joint
  • Complex Analysis of Plane Problem of Two-Dimensional Quasicrystals
  • Bioinformatics Analysis and Characteristics of UL19 Protein of Duck Plague Virus
  • Position and Speed Detection of Synchronous Motor Rotor
  • The Study of Retroreflective Material Based on Mesopic Vision Theory
  • SiO2 Content Retrieving Based on ASTER and its Application in Metallogenic Prediction in Abra, Australian
  • Research of the Interference of Surface Plasmon in an Enhanced Two-Slit Structure
  • Comparison of Multivariate Calibrations for the Determination of Soluble Solids Content of Tea Beverage Using UV-VIS-NIR Spectroscopy
  • Nondestructive Discrimination of Grape Seed Varieties Using UV-VIS-NIR Spectroscopy and Chemometrics
  • Corrosion Characteristics of 2205 Duplex Stainless Steel in High Temperature and High Pressure Environment Containing H2S/CO2
  • Preparation and Dimming Performance Study of PNIPAm Thermal Hydrogel
  • Simple Synthesis of Layered Zinc Phosphate and its Evaluation of the Corrosive Effectiveness
  • Microstructures and Properties of Y2O3/La2O3/Cu Composite by Internal Oxidation
  • Microstructures and Properties of W-26Re Alloy by SPS
  • A Novel Nanogap Fabrication Technique Using Taguchi Method and Modified Particle Swarm Optimization
  • Tribological Study of Xanthate-Containing Acetic Ester as Additives in Hydrogenated Oil
  • Researches Regarding the Nature of the Embeddings in the Cast Pieces Made of Aluminium Alloys
  • Poly Gate Proximity Effect Modeling for 40nm CMOS
  • The Pretreatment of Ramie Fiber Material with Supercritical CO2 Fluid
  • PSP Statistical Modeling for 40nm MOSFET
  • Low-Alkali Cement Composition Using the Green Tea and Industrial-by Products
  • Numerical Simulation of Failure Mode and Crack Propagation of Marble with Pre-Existing Fissure
  • The Improvement of Pcb’S Electroplating Uniformity
  • Applied Research of Smelting High Nitrogen Steels by Bottom-Blowing Nitrogen
  • Chapter 2: Manufacturing and Control Systems, Industry Application
  • Discrete Harmony Search Algorithm for the Disassembly Scheduling Remanufacturing Engineering
  • Structural-Acoustic Analysis of Automobile Passenger Compartment
  • Design and Implementation for the Information Integration of Mechanical Manufacturing Enterprises
  • Application of Distributed Control System in Papermaking Process Based on CIPS Technology
  • Parameters Evaluation for Aero-Engine Prognostic Health Management
  • Study on the Simulation Model of the Production Capacity Decision in Hydrogen Fuel Cell Vehicles Industry
  • Study on Application of Process Analysis in Mechanical Processing Industry
  • Lightweight Design of the Truck Side Framework
  • The Mill Pacing Research Based on the Optimized Plate Model
  • Identification and Elimination of Gross Error in Petrochemical Enterprise
  • Study of Impact of Gas Cooler Cooling Circuit on Heat Transfer Performance
  • Design and Simulation of Passive Controller for Guided Rockets
  • Estimate of Flying Projectile Attitude Based on MEMS Gyroscope Measurements
  • Temperature and Humidity Detection System Based on Power Line Communication
  • Study on Control Strategy of Shape Set up System for HSM
  • Cross-Directional Basis Weight Measure and Control System Based on CARMA Model Predictive Function Control Algorithm
  • The Importance of the Plane Digital Assembly Site Supply Chain Manufacturing Process Management and Control
  • The Analysis of Intra-Industry Trade in Auto Parts Industry in Jiin Province
  • The Research of Permanent Magnetic Field Treatment on the Iron & Steel Industry Circulating Water Impacts of Stability Index
  • Dynamic Anti-Windup Design for Missile Overload Control System
  • Using TRIZ-Based Conflicts-Solving Approaches for Product Life Management (PLM) of Innovative 3C Consuming Product
  • Design of a Data Collection System in Manufacturing Informationization
  • Method and Application of Intelligent Reconfigurable Control
  • A New Method to Control and Monitor a 6 D.O.F. Robot Arm
  • Inverse Design of Air-to-Air Missile System Based on Improved Genetic Algorithm
  • Research on the Algorithm of Aviation Emergency Rescue under Major Disasters
  • Research on Pricing Strategy of the Closed-Loop Supply Chain in Heterogeneous Market
  • Mining Method for Weighted Concise Association Rules Based on Closed Itemsets under Weighted Support Framework
  • Design of Profibus-DP Slave Station Based on DPRAM
  • Network Design and Implementation of Intelligent Warehouse Based on EPC/RFID and WSN
  • A Performance Modeling Language for Automotive Embedded Control Systems Based on UML
  • Ontology Modeling of Aircraft Fault Knowledge
  • Max-Max Based Internal Model Control Method for Multivariable System with Time Delay
  • Analysis to the Influence of Rendering Intents on Image Reproduction
  • Research on Air Target Attitude Testing Technology
  • Based on the PS/T Method Control Design of Flexible Systems
  • Trajectory Tracking Control of Hypersonic Reentry Vehicle Based on Adaptive Fuzzy System
  • A New Control Method for Fermenter Temperature
  • A Zebra-Crossing Detection Algorithm for Intelligent Vehicles
  • Research on Manufacturing Process Planning Based Double Main Spindles of Chuck for Mill-Turn Machine
  • Based on the Topography Image Segmentation Level Set Method
  • Application of Adaptive Enhancement Means in Head and Neck CR Image
  • A Method to Predict Disc Cutter Specific Energy for TBM Based on CSM Model
  • Research of Kinematics Simulation of TBM Segment Erector Based on Virtual Prototype
  • Contact Analysis of HSK Toolholder-Spindle Interface
  • Polishing Optical Glass by Mechanochemical Machining
  • Influence of Welding Sequence on the Welding Residual Distortion for Laser Welded Sandwich Structures Used in Shipbuilding Industry
  • Study on the Hot Stamping Process of DP Steel Engine Dumping Plank Based on FEM
  • Resistance to Impact Load Analysis of a Novel Magnetorheological Damper
  • Two DOF Parallel Robot Design and Dynamics Simulation for Quick Picking
  • Algorithm of Identifying Pencil-Cutting Regions for Free-Form Surface
  • Effect on Gray Balance Caused by Slight Chromaticity Deviation of Paper in Image Reproduction
  • The Lightweight Design of CNC Lathe Spindle Box Based on Topology Optimization
  • 3D Reconstruction of Weld Pool Surface by a Biprism Stereo System
  • Fault Diagnosis Mechanism Based on FTA and Bayesian for Large-Scale CNC Equipments
  • Data Storage Model for Laser CDs
  • The Design of TIG-AWP Based on Inverter and DSP
  • Intelligent Temperature Controlling System Based on Single Chip Microcomputer
  • Automatic Data Statistics of Materials Failure Case Utilizing Ontology
  • Adaptive Regulation of Tracking Servo for Next Generation Optical Data Storage Systems
  • Effect of Instrument Precision on Area Quality Measurement Used in Digital Printing Quality Assessment
  • On Sonar Image Processing Techniques for Detection and Localization of Underwater Objects
  • A Novel Design of Experiments for Global Optimization of Light-Gauge Steel Wall Sound Isolation Systems
  • Research of Image Acquisition and Processing System of the Flow Meter Verification Equipment Based on Embedded Linux System
  • Research on Remote Virtual Assembly Technology of Plug Valve Based on VRML
  • Influence of Surface Pretreatment on Carbon Coating of Cutting Tools Using PVD
  • Test and Finite Element Simulation of Steady-State Temperature Field of Rolling Tire
  • Design of the Human-Machine Interactive System of Double Twister Based on WinCE
  • The Data Fusion of Chess-Playing Robot Based on SERCOS
  • A Survey of Technologies for Climbing Robots
  • The Theory and Methods of Mineral Resources Quantitative Forecast and Evaluation
  • Voltage and Frequency Droop Control in an Autonomous Microgrid
  • Numerical Simulation of Projectile Accelerating Process in Aftereffect Period
  • The Design and Implementation of Power Management Module for Satellite Service System Based on Self-Awareness Technology
  • Design of Double Twister’s New Control System Based on Multi-Electromotor Driving
  • A Novel Harmonic Control Circuit Based on Composite Right/Left Handed Transmission Lines
  • Visual Thinking in Data Visualization
  • Image Surface Defects Extraction Technology Based on Watershed Segmentation and Texture Analysis
  • Chapter 3: Civil and Building Constructions Engineering
  • Static Finite Element Model Updating for Special-Shaped Bridge Based on Response Surface Method
  • Damage Identification of Simply Supported Beam Bridge Based on Time Series Analysis
  • PFC/FLAC Coupled Numerical Simulation of Excavation Damage Zone in Deep Schist Tunnel
  • Weighting-Grey Relative Degree Assessment Model of Concrete Structure Durability and its Application
  • Numerical Simulation of Inner Support for Excavation Based on FEM Software ABAQUS
  • Seismic Capacity of Reinforced Concrete Frame Strengthened with In-Filled Wall Using Embedded Form
  • Structural Damage Identification Based on Acceleration Response Vibration Transmissibility
  • A Study on Objects Information Compatibility between BIM Softwares for Building Thermal Load Analysis
  • Geometrically Non-Linear Formulation of Planar Flexible Multi-Beam Systems: Stiffness under Second Order Theory
  • Theory and Methods on Tactics Generation of Extension Architectural Programming Facing to Artificial Intelligence
  • Pedestrian System of Singapore and its Enlightenment
  • Independent Technology of CBTC System and Management Innovation in Urban Rail Transit
  • Research on Urban Rail Transit Testing Simulation Platform Based on Minimum System
  • Multivariate Poisson-Lognormal Regression for Crash Prediction of Different Types on Freeways Diverge Areas
  • Development and Evaluation for Improvement of a Beam-Form Support in Korean Building Constructions
  • Tensile Capacity of Mechanical Bar Connection Corresponding to Detail of Screw on Bar Surface for Construction
  • Design and Implementation of Langfang Earthquake Disaster Prediction System Based on GIS
  • Chapter 4: Pharmaceutical, Chemical and Energy Engineering
  • Significance of Delayed Geochemical Hazard of Cd in Dawu River Domain in the Dexing Copper Mine, Jiangxi Province
  • Recovery of Lead from Lead Oxide Ore from Kazakhstan by Gravity Separation Combined with Flotation
  • Comparative Optimization on the Focusing Methods of Solar-Electric Dish Stirling System
  • The Study on Acceptable Capacity of Wind Power for Gansu Power Grid Based on Power Balance
  • Research on the Effect of Governor System to Low-Frequency Oscillation of Power System
  • Syntheses and Properties of Pyrrole Derivative as a Cathode Material for Li-Ion Batteries
  • Simple and Rapid Synthesis of LiFePO4/C Composite for Lithium Rechargeable Batteries by Microwave-Solvothermal Method Assisted with Short Time Post-Treatment Process
  • Study on Wind Speed Prediction Based on Rbf Neural Network
  • Application and Research on Reducing Reaction of Boron Slag in the Steelmaking Engineering
  • Research on Model of Solid-Solid Reaction and Experiment
  • Thermodynamic Research of Boron Oxide Reducing with Carbothermic Method
  • Electric Power Tower Inclination Angle Detection Method Based on SIFT Feature Matching
  • A SiGe RF Power Amplifier for TD-SCDMA Application
  • Study on the UV Photosensitive of Hexaarylbiimidazole Photoinitiator System
  • A New Federation Approach in Analysis of Pharmaceuticals
  • An Approach for Data Analysis of Multi-Group Metabonomics Base on Hierarchical-PCA
  • Comparing Level Set Method and Canny Algorithm for Edge Detection to Tongue Diagnosis in Traditional Chinese Medicine
  • Biological Effects of Color Lighting for Different Ages
  • Shallow Groundwater Environment Quality Evaluation Based on the Method of Factor Analysis
  • A New Slope SOI-LDMOS High-Voltage Power Device
  • Hydrogen Bonding Interaction between a Series of Bolaform Schiff Bases with Barbituric Acid by Spectra and HPLC
  • Research on Interfacial Assembly and Coordination of Two Bolaform Schiff Base Compounds with Aromatic Spacer
  • Chiral Interfacial Assembly of a Trigonal Schiff Base Compound with TPPS in Organized Molecular Films
  • Investigation of Coordination Interaction of Trigonal Schiff Base Compound with Zn(II) Ions in Organized Molecular Films
  • Medical Auto-Injector Design
  • Chapter 5: Electronic Communication Engineering and Electrical Automation Engineering
  • The Design and Implementation of LCD Electronic Clock Based on Renesas MCU
  • The Design and Optimization of Optic Fiber Isolation Amplifiers for EAST Quench Detection System
  • Micro Line Quality Measurement Based on Normally Scanned Digital Image
  • Embedded Monitoring System of Progressing Cavity Pump Operating Conditions
  • Design of Electronic Sphygmomanometer Based on Oscillography
  • Design of ECG Signal Acquisition and Processing Circult
  • Effects of Architecture Design on Safety Level of Airborne Electronic Systems
  • Research on Customer Churn Model with Least Square Support Vector Machine
  • Face Recognition Using Local Variation
  • Physical Insights into the Fields upon the Superstrate-Loaded Cylindrically Conformal Microstrip Antenna
  • Design of Antenna for UHF Near-Field RFID Reader
  • The Application of EMD in Dynamic Water Level Measurement
  • Pattern Synthesis of Circular Array Antenna by Improved Genetic Algorithm
  • A PSO-Based UWB Pulse Waveform Design Method
  • Design and Implementation of MIPS Simulator Oriented Memory Hierarchy Research
  • Integrated Temperature Sensor AD 590 and its' Application
  • A Dynamic Threshold Optimization Algorithm for Spectrum Sensing with Energy Detection in Cognitive Radio
  • Design of Frequence and Angle Measurement System Based on FFT and Monbit Receiver
  • Related Technology Research on Navigation Electronic Map
  • Traffic-Aware Adaptive Discontinuous Receiving Scheme for Power Saving in Cellular Networks
  • Interrelated Characteristics and Simulation of the MIMO Channel
  • Unmanned Aerial Vehicle Maritime Surveillance System of River Reservoir Area
  • Digital Relaying Algorithm on Substation System Protection
  • A 40Gb/s Transimpedance Amplifier Using Modified Regulated Cascode for Optical Fiber Communication
  • Design and Optimization on Train-Ground Wireless Communication of Passenger Information System of Urban Rail Transit
  • Design of a Novel Tag Antenna Mountable on the Side of Cigarette Carton
  • Design of a Robust Model Reference Adaptive Control System
  • Theoretical Analysis of Wavelength Conversion in Fiber Bragg Grating External Cavity Lasers
  • SD-NFC Mobile Payment Research and Programming for SWP/HCI
  • Research on Fast Capsule Image Segmentation Algorithm
  • A High Isolation Rate Race Circuit Compose the Carrier Leakage Canceler for RFID
  • MMW Radiometric Image Feature Extraction for Security Inspection
  • Development of High-Speed Memory Interface Application Based on FPGA
  • The Weighted Localization Algorithm Based on RSSI Calibration
  • Research of Image Processing Based on High Frame-Rate Beacon for Free Space Optical Communication
  • An Improved MAC Protocol for Wireless Sensor Networks in Medical Application
  • Wireless Access and Mobility Support for Automated Storage/Retrieval System and Logistics on Aluminum Profile
  • Comparison and Simulation of Subpixel Imaging Modes for Linear CCD
  • Joint Scheduling and Power Allocation in OFDMA Network with Decode-and-Forward Relaying
  • Efficient and Instant Transmission for Wireless Broadcast
  • A Combined Global Coarsening Method for 3D Multigrid Applications
  • Energy-Efficient Node Scheduling for Dense Wireless Sensor Networks Using Voronoi Diagram
  • A Gain-Schedule Adaptive LQG Control for Networked Systems with Time Delay and Packet Dropout
  • A Novel CBCD Method Based on 3-Dimensional SIFT Descriptors in Dynamic Tunnels
  • A Multi-Objective Optimization Approach to Product Configuration Design with the Consideration of Uncertain Information
  • A Clustering Routing Algorithm Based Ant Colony Optimization for Wireless Sensor Network
  • A Sub-Pixel Extraction Method for the Center of the Circular Structure from Spot Array Calibration Target
  • Identifying the Attractive Attributes of the Massively Multiplayer Online Role-Playing Game Designs
  • A Maximum-Minimum Filtering Algorithm Base on Threshold
  • The Application of 3-Colour Theorem and 4-Colour Theorem in the Problem of Repeaters’ Site Selection
  • Noisy Iris Segmentation with Reflections Removal Using Probable Boundary Edge Detector
  • Research on the Optimization of Transportation Routing Problem of Warehouse Material Based on Self-Adaptive Ant Colony Algorithm
  • JointDesign of RS Coding and Byte Interleaving in CMMB System
  • An Improved Algorithm of Spectrum Access in OSA
  • Enhanced Provably Secure NTRU Encryption Based on Hard Learning over Rings
  • An Edge Extraction Algorithm Based on Morphology
  • Design of Weather Modification Assessment System for Evaluating Artificial Test Effect
  • SVM Based Land/Sea Clutter Classification Algorithm
  • A Novel Priority Based Packet Scheduling Scheme for Video Streaming over WiMAX Networks
  • Research of Image Matching Based on Evolutionary Algorithm
  • Face Detection Based on Gabor Wavelet Transform and Statistical Cluster Model
  • A Color Based Image Retrieval Method
  • Improved Embedded Micro-PSO for High-Dimensional Optimization Problems
  • CCPSO Based on PCA for Large-Scale Optimization Problem
  • A New Simple Micro-PSO for High Dimensional Optimization Problem
  • The Parametric Simulation Design Method of Conjugate Cams of Automatic Pin Insertion Machine Based on Creo Parametric Software
  • The Development of ECG and PPG Measurement Device
  • Research of Fiber Bragg Grating Sensor Demodulating Technology with Lab VIEW
  • The Principle and Structure of Novel High-Precision Linear Time Grating Displacement Sensors
  • A Novel Fuzzy Logic PID Algorithm for Submarine Hydraulic Rudder Control
  • Design of an Ultra-Low Power Timer System Based on C8051F410
  • A Method for Vibration-Cylinder Air-Pressure Sensor Temperature Compensation Based on Radial Basis Function (RBF) Neural Network
  • A Joint Transmitter-Receiver Adaptive STAP Algorithm of Clutter Suppression for Airborne MIMO Radar
  • A Research Concerning a Distributed Automation Scheme for 10kV Aerial Wire with Grounding Protection
  • Chapter 6: Electrotechnics, Mechanical Engineering and Applications
  • Estimation for Bearing Preload of Machine Tool Spindle Based on Vibration Signal
  • Shafts Parameter Optimization Design for Lunar Rover Wheel-Leg Planetary Mechanism
  • Study on Automatic Planning of Truck-Mounted Concrete Boom Pump System
  • The Relationship between Temperature and Levitation Stiffness of YBCO Bulk for Maglev Vehicle
  • Research on the Arrangement of Main Shaft Bearing in the Late-Model High-Stiffness CNC Lathe with AHP
  • Five-Phase Half-Controlled Bridge Commutation and Stabilizing Voltage Nd-Fe-B Permanent-Magnet Generator for Light Vehicle
  • Numerical Simulation and Study on Three-Dimensional Flow Field of Wind Turbine Impeller
  • Two-Objective Optimization of Drawing Mechanism Based on Genetic Algorithm
  • Application of Virtual Substance in Launch Dynamics Simulation for Self-Propelled Guns
  • Research of Self-Study Arithmetic on Energy Recovery Brake Pedal in Hybrid Cars
  • Research on a Novel Electrical Gear-Type Grating Sensor
  • Design of the Gear Database Based on UG Secondary Development
  • A New Design Method of Dexterous Hand Based on Power Second Distribution
  • Research on Automatic Judgement of Wheelset Press-Fit Curve
  • Research on Improvement the Second Harmonic Signal to Noise Ratio Using Pulse-Inversion Technique
  • Dynamics Grey Forecasting Model of Time Grating Numerical Control Rotary Table
  • Digital Design and Performance Evaluation of the Rocket Engine
  • Control Method Research of Electrical Vehicle Used IPM Synchronous Motor
  • Design of Power Control System on Medium Frequency Induction Furnace Using Microcontroller
  • A Fitting Method for Establishing an Aeroengine’s State Variable Model Based on Process Identification
  • Modified Strong Tracking Filter for the SOC Estimation of Lithium Battery in Electric Vehicle
  • The Experiments of Cantilever Piezoelectric Vibrator Power Generation
  • Harmonic Frequency Cascade Static Synchronous Compensator
  • A Novel Dual-Mode Microstrip Bandpass Filter with a Pair of Equal Crossed Slots


Best Sellers


Product Details
  • ISBN-13: 9783037855317
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1480
  • Spine Width: 74 mm
  • Width: 170 mm
  • ISBN-10: 3037855312
  • Publisher Date: 24 Dec 2012
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 236-237 Applied Mechanics and Materials
  • Weight: 200 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Technology for Manufacturing Systems and Industry: (Volumes 236-237 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Advanced Technology for Manufacturing Systems and Industry: (Volumes 236-237 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Technology for Manufacturing Systems and Industry: (Volumes 236-237 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!