Frontiers of Mechanical Engineering and Materials Engineering
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Frontiers of Mechanical Engineering and Materials Engineering: (Volumes 184-185 Applied Mechanics and Materials)
Frontiers of Mechanical Engineering and Materials Engineering: (Volumes 184-185 Applied Mechanics and Materials)

Frontiers of Mechanical Engineering and Materials Engineering: (Volumes 184-185 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). This work brings together some 400 peer-reviewed papers on Nanoscience and Materials Technology, and is intended to promote the development of Mechanical Engineering and Materials Engineering; thus strengthening international academic cooperation and communication and the exchange of research ideas.

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Mechanical Science and Engineering A Domain Decomposition Method for Forced Vibration Analysis of Joined Conical-Cylindrical-Spherical Shell Parameters Optimization of Rotary Ultrasonic Machining of Zirconia Ceramic for Surface Roughness Using Statistical Taguchi’s Experimental Design Aeroacoustic Study on a Simplified Nose Landing Gear Aerodynamic Drag Reduction Design of Concept Sports Car A Numerical Model for Evaluating the Casting Complex Degree A Research on Friction Properties of Concave Laser-Textured Surface Accurately Parameterization Modeling and Thermo-Mechanical Coupling Analysis of Spiral Bevel Gears of Reducer A Study on Characteristic Line of Auto Modeling Based on Rhinoceros An Evolution Study on Family Characteristic of BMW 3 Series Based on Aerodynamics An Experimental Study of V-Ring Position on the Die Roll Height in the Fine Blanking of Special Part with Corner Shapes An Improved Damage Detection Method and its Application Analysis of Dry Dual Clutch Transmission Technology Applied Research on Optimum Design of Planetary Reducer Bearing Fault Detection Based on SVD and EMD Bending Analysis and Measures of the Forming of Automobile Semi-Axle on Cross-Wedge Rolling with Multi-Wedge Calculation of Rigid-Body Motion of Integrated Raft Isolation System CFD Prediction of the Effects of Surface Roughness on Elastohydrodynamic Lubrication under Rolling/Sliding Conditions Comparative Analysis of HPDC Process of an Auto Part with ProCAST and FLOW-3D Computational Estimation of Fan Casing Noise at Blade Passing Frequency Component Noise Consistency of High-g Acceleration Sensor Performance Corrosion Reason Analysis of Ground Gathering Pipelines in High Flow-Rate Gas Condensate Field Deformation Identification and Tank Capacity Table Calibration of the Storage Tank Description of Rotor's Position of Magnetic Suspension Spherical Reluctance Motor and Detection Research Design and Debugging of Semi-Self-Automatic Welding Equipment for Bus Roof-Hood Skin Design and Experimental Investigation of a Bionic Subsoiler with a Multiplex-Modality Shank Design and Simulation Study of a New Type of Dual Mass Flywheel Design of a Pineapple Picking End-Actuator Design of the Metal Gasket of Subsea Connector for Manifolds Design of the PRO/MECHANICA to Variable Cross-Section of Micro-Mechanical Cantilever Based on the Finite Element Method Determination of Interface Heat Transfer Coefficient for Cylindrical Casting by Using an Inverse Heat Conduction Model Disturbance Suppression in Attitude Control of Raft System Using Air Spring Drivability and Fuel Economy Evaluation of a Sport Utility Vehicle Using CAE Tool Dynamic Strength and Fatigue Reliability Analysis of Breech Based on FEM Dynamic Study of Valve Train for Rotary Piston Engine Edge Distance Determination for Aeronautical Thin-Walled Structures with Automated Riveting Effect of Surface Roughness on Performance of Spiral Groove Gas Film Face Seal Effects of Cooling Air on Performance of Turbine Blade Based on CHT Simulation Elastic and Plastic Analysis of Drive Wheel’s Hertz Contact Experimental Study on Bendability of Thin-Walled 6061-T4 Tube under Different Bending Velocities The Mechanism Optimization Design of Multifunctional Mobile Electric Bed-Chair Feature-Based Identification and Reconstruction of Regular Curves and Surfaces Finite Element Analysis of Cylinder Involute Tooth Gear Based on ANSYS Finite Element Analysis of Impact of Root Fillet on Bending Stress for Helical Gear of Automotive Transmission Finite Element Analysis of Metallic Structure of Unconventional Dedicated Tower Crane Finite Element Analysis of the Bionic Tissue Engineering Scaffold for the Defect Cranium Finite Element Analysis of Treating Distal Femoral Fractures by LISS Finite Element Analysis of ZY18000/32/70D Hydraulic Support Double Telescopic Mast Finite Element Modal Analysis of Frame of Vertical Type High-Pressure Grouting Machine Based on ANSYS Flexibility of Flapping Rotor Wing and its Effect on Aerodynamic Characteristic Flow Field Analysis and Numerical Simulation for Dynamic Filtration with Rotating Disks Fracture Failure Analysis of 127mmG105 Drill Pipe Grab Bucket Optimization Design Based on the Kinematics and Dynamics Analysis Identification and Modeling of Vibration Signals in Startup Stage of Electric Driven Reciprocating Pump Influence of Humidity on Burning Perfectibility of Winding Combustible Cartridge Case Influence of the Surface Tension of Edible Ink to Piezoelectric Ink-Jet Printing Drop State Investigation of the Influence of the Roll Surface on the Cast Strip at the Casting Using a Vertical Type High Speed Twin Roll Caster Investigation on Diesel Engine Volume Impact Factors Based on Design of Experiment Kinematics Analysis and Simulation of the 4-DOF Tilter Kinematics Analysis of the Driving Cylinder for Dual-Rotor Piston Engine Large Eddy Simulation of Airflow Structural Characteristics in Real Human Mouth-Throat Model Measurement and Calibration of the Displacement and Pressure in Automatic Wheelset Assembly Machine Mechanical Analysis of Disc Cam Mechanisms with Negative Radius Roller Translating Follower Modal Analysis of Eccentric Rotor for Multi-Layer Leather High-Speed Cutting Machine Based on Bond Graph Method Modeling and Algorithm of Adaptive Gas Cooling Subsystem for Direct Metallic Component Manufacturing Multi-Objective Design Optimization of Cooling Turbine Blade Based on Kriging Model Non-Uniform Motion Mechanisms Utilized in a Twin-Rotor Piston Engine Numerical Analysis of Axisymmetric Nozzle Aerodynamic Characteristics Numerical Analysis of Fluid-Structure Interaction during Ignition Process for Solid Rocket Motor with Stress-Reliver Numerical Simulation and Optimization of Cooling Ducts Layout in Hot Stamping Die Numerical Simulation of Cylinder Part Based on Dynaform Numerical Simulation of Flow Field and Separation Efficiency of Inclined Cut-In Double-Inlet Cyclone Numerical Simulation Study on Airflow Structural Characteristics in Real Human Airways Model Optimal Design of an Ultrasonic Transducer in Rotary Ultrasonic Machining Optimization Design of DVG850 Worktable System Based on ANSYS Workbench Optimization of Hardpoints of Independent Air Suspension Based on ADAMS Optimum Design of the Support Structure of the CMG Based on CAE Performance Simulation for Electric Vehicle with Motorized Wheels with Cruise Positive and Reverse Design of Screw Rotor Profiles with Freeform Curve Pro/E-Based Non-Damage Dynamic Simulation Assembling and Disassembling of CA6140 Quantitative Evaluation in Maintainability of Equipment Engineering Developing Stage Research and Application on a Multi Head Conjugate Disc Indexing Cam Mechanism Research and Application on Fault Simulation Technology Based on Virtual Prototype Research of Embedded Precision Internal Grinding Open CNC System Based on Decoupling Design Research of Machine Tool Reconfiguration Based on Reliability Research of Mechanical Sensibility on Vibrating-Beam Piezoelectricity Gyroscope Research of Reliability Enhancement Testing about Fatigue Component of a Feeding Mechanism Research on Accuracy Design of Mechanical Design Research on Air Conditioning System Minimum Fresh Air in Textile Workshop Research on Efficiency Model of the Variable Hydraulic Pump Based on System Identification Research on Fatigue Life Forecast for Torsion Shaft of Self-Propelled Gun under Stochastic Loads Research on Kinematic Performance Simulation of Double-Wishbone Independent Suspension Based on CATIA Research on Structure Design Parameters’ Similarity for Loading Machine Research on the Maximum Bending Stress on Driving Tine of SCMW Research on Windage Power Loss of Spur Gear Base on CFD Simulation of Sound Generation by Flow over a Cavity with the Lattice Boltzmann Method Simulation on Stress Distribution of Drill Pipe’s Surface Initial Crack Simulation Study of the Effect of Hydraulic Hose Parameters on Hydraulic Impact Solving Acoustic Radiation and Scattering Based on Coiflet Steady CFD Analysis on Gas Turbine Stage Cascade Based on Mixing Plane Model Strategy and Application of Modeling and NC Machining for Rotary Parts of Complex Curved Surface Stress and Deformation Mechanics Model of Sensing Structure in Micro-Machined Capacitive SOI Accelerometer Stress Concentrations in Interference Fit Joints with Chamfered Hubs Stress Intensity Factor for a Plate with a Crack Stiffened by Partial Stringers Structure Improvement and Mechanical Analysis on Data Transmission Antenna Study of the Metal Flow Law on Cross Wedge Rolling Asymmetric Shaft Study on 3D Strain Distribution Characteristics Using Etched Grid Method in Tube Bending Study on Designs of Stoppers for MEMS Devices in Shock Environment Study on High-Speed Train Terminal Speed Based on Adhesion Utilization Study on the Damage Diagnosis of the Cantilevered Machine Tool Beam Based on BP Neural Network The Experimental Research of Vibration Isolation Performance of MR Isolator at High Temperature The Experimental Study on Dense Paste’s Rheological Characteristic The Finite Element Analysis of Omni-Direction Side-Loading Forklift Truck Lifting System Based on COSMOSWorks The Finite Element Analysis of Premixed Abrasive Water Jet Abrasive Tank Based on the Simulation The Influence of Cobalt Starting Sheet Stamping Molding The Influences of Complex Impact Conditions on Aircraft Fuselage Crashworthiness The Intelligent Analysis Method of Mine Equipment Lubrication and Wear Condition The Microenvironment Simulation and Ergonomic Evaluation of Negative Pressure Isolation Cabin The Modeling and Simulation for the Combined Mooring Windlass Test Rig The Multi-Objective Optimization of the Planet Carrier in Wind Turbine Gearbox The Process Rebuilding of Tire Liner Product Line System The Research and Design of Horizontal Power Cutting Mixer The Research of Cold Roll Forming Numerical Simulation of Involutes Spline on ANSYS The Research of COMAS Vibrating Conveyor Noise Reduction The Study of Ink Viscosity and Ink-Transfer Relations The Study of the Design Parameter of Lead Rubber Bearing The Technology of Positional Detection in Automatic Wheelset Assembly Machine Three D Spiral Surface Modeling by Simulation Based on the Section Profile Revolution – Accumulation Method Three-Dimensional FEM Analysis for a Kind of Engine Crankshaft Torque Modelling and Experiment in Pelleting Process of Rotated Roll Forming Tractor Hydraulic Lighten Testing System Based on OPC Technology Transmission Error Analysis of Space-Curve Meshing-Wheel with Angular Misalignment Vertical Planetary Wheel Sand Reclamation Equipment Design and Modeling Based on Solid Edge Vibration Analysis of Flexible Multi-Body Drill String System by FSI Vibration Characteristics of a Containing Liquid Cylindrical Pipe with Lumped Mass A Study for Performance of Corn Straw Smashing Device Measurement and Simulation of Residual Stresses of Electron Beam Welding Joint of Pure Aluminum Research on Analytical Procedure of Failure Mechanism Consistency in Rubber Material Accelerated Ageing Test Research on Dynamic Characteristics Based on Roll-Bite Model in Metal Elastic-Plastic Deformation Process Research on Tool Wear Form in Micro Turn-Milling Process Simulation and Experiment for the Ogive Affecting PELE Broken Finite-Thickness Reinforced Concrete Targets Simulation Design of Clamp Holder for Sugarcane Strength Analysis of High Strength Steel Hydraulic Support Study on the Mechanical Property of Gunpowder Composite Welding Rod Temperature Measurement and Simulation in Stainless Steel High-Speed Grinding The Data Processing Technique of Metallic Sheet Friction Coefficient Determination The Forced Creep Analysis of Nonmetallic Material The Influence of the Coarse Aggregate Size on Mechanical Properties of Reinforced Concrete Beams Vibration Test of Titanium Alloy Pipes A Novel Design of Lower Limb Rehabilitation Robot Based on Spring Device and Magnesium Alloy Design of Ellipsoid Aluminum Plate System for a Certain Missile Application of Piezoelectricity Acceleration Sensor to Dynamic Characteristics Monitoring of Tied Arch Bridge Analysis of Tubing Collapse Failure during the Operation of Blending Light Dropping Viscosity Complex Object Modeling Method Based on 3ds MAX Platform Constructional Bamboo Plywood Process Control and Production Process Roll Eccentricity Extraction Method Based on Comprehensive Signal Processing Microscale Effect of Elastic Beam of the Micro-Machined Gyroscope The Character Research of Oil Source with Load of Rolling Screw System Vibration Simulation of Tracked Vehicle Suspension and Damper Consumption Analysis Simulative Research on the Influence of Vehicle Brake Deceleration on the Throw Distance Property of Human-Vehicle Accidents The Study on Influencing Factors of Dense Paste’s Resistance Characteristic Volume - Variable Mold with Multi - Circular Arc Cavity and its Optimal Design A Mechanics Model and Active Control for Smart Constrained Layer Damping Structure Optimization Design of Disc Cam Mechanisms with an Offset Translating Negative Radius Roller Follower The Effect of Accumulator Volume and Inflation Pressure on Tracked Vehicle Braking System Strength Reliability and Parameter Sensitivity Analysis of a Missile Airfoil Structure The Research on Tooth Profile Total Deviation Measuring Method Based on Coordination Measuring Machine Research of Virtual Test of the Combine Harvester and its Key Components Synchronization of a Class of Chaotic and Hyperchaotic Systems via a Simple Universal Control Method Chapter 2: Materials Science and Engineering Corrosion Resistance of MgO-ZrO2 Brick and MgO-Cr2O3 Brick Compared by Rotating Slag Attacking Method Study on Constitutive Model of Weibull Distribution of Cement-Soil Uniaxial Stress Conditions Effect of Particle Size on the Lamellar Pore Microstructure of Porous Al2O3 Ceramics Fabricated by the Unidirectional Freezing Effect of Precursor on Sonochemical Synthesis of PbWO4 Crystals Effect of Precursor on the Hydrothermal Synthesis of K0.5Bi0.5TiO3 Crystals Effect of Si on AA5182 Strip Cast by a High Speed Twin Roll Caster Effect of Thermomechanical Treatment on Mechanical Behaviour and Microstructure of Low Alloy Steel Effect of WC Contents on Microstructure and Properties of Steel-Bonded Cemented Carbide Effects of Process Conditions on Crack Healing in 30Cr2Ni4MoV Steel during Hot Forging Analysis on Backside Cracks in 316LMod Inner Linings of Urea Reactors A Novel Durable Stiffness Finishing of Cotton Fabric A Study of the Optical Properties of Triazene-Cinnamic Acid Polymeric Fluorescent Brighteners A Study of Tribological Properties of Polyphenylene Sulfide Composities Reinforced with CNT and CNF A Technology for Producing Hot Rolled Product of Cold Heading Steel Ameliorated Hydrogen Storage Kinetics of Mg20Ni7M3 (M=Co, Cu) Alloys by Melt Spinning An Analytical Finite Element Technique for Predicting Temperature Distribution in Turning Titanium Alloy Analysis of Micro Structure’s Elastic Stiffness Analysis of WC Dissolution Phenomenon Happened in TIG Welded Joint of Cemented Carbide and Invar Alloy Au-Catalyzed Homocoupling of Terminal Alkynes Chip-Bifurcating Criteria for Bifurcating Chip Cutting Method of Metal Fibers Comprehensive Evaluation Research on the Performances of High Quality Underwear Fabrics Compression Deformation Behavior of AZ91D Magnesium Alloy at Elevated Temperature Continuous Cooling Transformation Behavior of D460 Ship Plate Steel Controlled Growth of Carbon Spheres by Chemical Vapor Deposition Based on Anodic Aluminum Oxide Nano-Template Corrosion Behavior of Prepainted Steel Sheets for Construction Crystallization Behavior of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization Design for Noise Reduction of the Interior of Building Using Microcellular Foamed Plastics Development of Laminar Flow Cooling of Ultra-High Strength Ferrite-Bainite Dual Phase Steel Development of SIMPLE-Like Algorithms for Incompressible Navier-Stokes Equations in Liquid Processing of Materials Development of Utilization of Vanadic Titanomagnetite Dyeing Process Research of Shengma Fiber Knitted Fabric Effect of Annealing Temperature on Corrosion Resistance of Cold-Rolled Strip of Complex Brass Effect of Heat-Treated Process on Tensile Property of PLA Plied-Yarn Experiment Research on Asphalt Pavement Performance with Different Flame Retarding Systems Experiment Research on Cutting Performance of High Volume Fraction SiCp/Al Composites in Rotary Ultrasonic Machining Experimental Investigation into Electrorheological Fluid-Assisted Polishing of Glass-Ceramic Experimental Study on Optimizing the Effect of Drilling Parameters on Roundness Error of Holes of Aluminum 7075 Using Response Surface Methodology Flexural Behavior of Void Reinforced Concrete Slab with CFRP Reinforcing Bars Gelcasting of BeO Growth and Characterization of InAs Quantum Dots on GaAsSb High Speed Dry Sliding Tribological Behaviors of Amorphous Fe-Based Alloy Coatings Hot Workability Analysis of Extruded Mg-Zn-Mn-Y Magnesium Alloys with Different Phases Improvement of Morphology, Structure, and Thermal Properties of Electrospun PVA/RSF Fiber Mats by SiO2 In Vitro Blood Compatibility of Alumina Coatings Prepared by Micro-Arc Oxidation on Biomedical NiTi Alloy Insight into Effects of Different Drying Methods on Morphological Properties of Sodium Alginate-Chitosan Double Coacervation Hydrogel Beads Investigation on Fatigue Damage and Fracture of Al-5Zn-2Mg High Strength Aluminum Alloy Investigation on Synthesis and Morphology of SnO2 Powders Prepared by Solution Chemical Method Investigation on the Influence of Precipitated Phase on Corrosion Resistance of the Ni-Based Alloys Low-Cycle Fatigue Behavior of Permanent-Mold Cast and Die-Cast Al-Si-Cu-Mg-Sc Aluminum Alloys Magnetic Property Study on Multi-Metal Compounds [MA(en)x]y[Fe(CN)6]z·nH2O(MA=Co2+,Gu2+) Measurement of Dislocation Density in Cold-Drawn Steel Wires by Means of X-Ray Bragg Profiles Analysis Mechanism Research and Progress of Metal’s Pure Electroplastic Effect Methyl Trichlorosilane Prepared Methyl Sodium Silicate Microstructure and Corrosion Resistance of Al2O3-ZrO2 Composite Coating on Biomedical Magnesium Alloy Fabricated by Cathodic Plasma Electrolytic Oxidation Microstructure and Properties of Non-Quenched Prehardened Steel for Plastic Mould with 700 mm Thickness Mineralizer Mediated Self-Assembly of PbTiO3 Crystals Modulation Structure and Superhardness Effect of VC/TiN Nano-Multilayer Films Photocatalytic Degradation of Methyl Orange by a New Photoctalyst Multi-Walled Carbon Nanotues (MWCNTs)/TiO2/CdS Nanocomposite Pilot Study of PET/Bamboo Charcoal Warp-Knitted Fabric Preliminary Research of Composite Dressing Fabric Preliminary Studies in Composite Scaffolds of Calcium Phosphate Bone Cement with Polylactide Preliminary Study in Cross-Linked Gelatin/Alginate Sponges Preparation and Characteristic of the New Magnetic Organic–Inorganic Hybrid Molecularly Imprinted Microsphere Materials Preparation and Characterization of Activated Carbon Fibers from Jute Fibers by Phosphoric Acid Activation Preparation and Characterization of Photocatalytic TiO2/CdS Nanocomposite Loaded on Multi-Walled Carbon Nanotues (MWCNTs) Preparation and Characterization of Protein-Montmorillonite Composites Preparation and Study to Core-Material of Microcapsule for Textiles Discoloration Finishes Preparation of Nano-CaCO3/Fast-Growing Poplar Composite by the Diffusion Method Preparation of PVAc Particles by Dispersion Polymerization Preparation of Size and Morphology Controlled Gold Nanoparticles in Micro-Emulsion and in Aqueous Primary Study of Polyester Composite Nonwoven Applied on Soilless Culture Process Parameters Optimization of Direct Synthesis Nano Magnesium Fluoride Powders Reason Research of the Low Impact Value of 2Cr11Mo1VNbN Ring Forging Reconstruction of Composite Surface Based on CMM Point Data Research on Aircraft Aluminum Alloy Structure Corrosion Fatigue Life Based on Artificial Neural Net Theory Research on Damage and Bending Properties of AZ31 Magnesium Alloy Research on Damping Properties of TiN Coating Prepared with Arc Ion Plating Research on Phases and Morphology of Fe-Se Powders Synthesized by Hydrothermal Method Research on Properties of Amorphous Cr-C Alloy Coating in Crystallization Evolution Research on Self-Cleaning Organic Ti-Si Compound Material Research on Solidification Heat Transfer Model of Copper Horizontal Continuous Casting Simulation of Compress Buckling Performance of Composite Stiffened Panel Sintering Densification in Fabrication of Particle Reinforced Ceramic Sodium Silicate as Catalyst and Modifier for Phenol-Formaldehyde Resin Sound-Absorbing Evaluation on Nylon 6/Low-Melting PET Nonwoven Fabric Studies on Bleaching and Scouring of the Jade Fiber Knitted Fabric Studies on Properties of EKS Heat-Generating Fiber and Yarn Studies on Thermal Conductivity of MWNTs/EPDM Composites by the Heat Probe Method Study and Analysis of Metal Coolant Thermophysical Properties Study of Pre-Processing Technology for Zinc Alloy Die-Casting Numerical Simulation on Flow-3D Study on Framework of Environment Adaptive Agent Based Materiel System Reliability Simulation Modeling Study on Plasma Arc Surface Hardening of Alloy Cast Iron Study on Reduction Behavior of Vanadic Titanomagnetite Mixed Coal Study on Surface Nanocrystallization of TiAl Alloys Induced by HEBMT Study on the Crack Forming during Cold Forging Process of ML25Mn Steel Study on the Microstructures and Properties of Middle-Carbon-Steel Rolled Pieces during Cross Wedge Rolling Study on the Oleophobic Characteristics Technology of Fluorined Polyethylenic Microspheres Study on the Surface Quality of Titanium Alloy in Ultrasonic-Assisted EDM Milling Super Wettable Poly(Ethylene Terephthalate)(PET) Fabric Modified by UV/Nano-TiO2/H2O2 Synthesis and Adsorption Characters of Silica Hollow Spheres Synthesis and Characterisation of Controllable Hairy-PANI Nanofibers with Perchloric Acid Synthesis and Characterization of Polyaniline Nanotubes Doped with Amino Acetic Acid Synthesis and Performance of Dopa-Modified Multiwalled Carbon Nanotubes Synthesis of Carbon Onions Including Fe3C by Chemical Vapor Deposition Using an Iron Catalyst Supported on Sodium Chloride Synthesis of Gold Nanoparticles Stabilized by 3-(Aminopropyl)Triethoxysilane through (N, N-Dimethylformamide) Reduction Synthesis of Rare Earth Catalyst LLa[N(TMS)2]•DME(L=3,5-But2-2-HO-C6H2CH-NH-C5H4N) and Catalytic Behavior for Polymerization of Rac-Lactide Synthesis of Zinc Hydroxystannate Single-Crystalline Nanocubes and its Flame Retardancy for Rigid PVC Synthesis, Crystal Structure and NLO of a Pb(II) Coordination Compound Based on HO-H2BDC The Effect of Component Distibution Varition on Bending Modulus of Gradient Interpenetrating Polymer Networks (IPN) The Inhibition Effects of Wood Light Induced Discoloration Coating with Water-Based Acrylic Varnish The Pattern Simulation of New Woodiness Restructuring Decoration The Primary Study on PLA/Tencel Nonwoevn Fabric The Study of Nano-Sized TiO2 Finishing Coconut Carbon/Cotton Interwoven Fabric Adsorption and Degradation Formaldehyde The Study on the Microstructure and Electrical Property of Boron and Sulfur Co-Doped Diamond Films by Chemical Vapor Deposition The Synthesis and Electromagnetic Properties of Wave-Like Ni The Wear Property of Plasma Sprayed Nano-Structured Al2O3-13%TiO2 Coating The Wearability Test and Comprehensive Evaluation of Knitted Fabric Made of Banana Fiber Thermodynamic Analysis and Observation of Inclusions in RE-2Cr13 Stainless Steel Thermo-Mechanical Simulation of Ultra-High Strength Ferrite-Bainite Dual Phase Steel Three Dimensional Stainless Steel Bone Scaffolds: Using the Electrochemical Technique to Coat Hydroxyapatite on Stainless Steel Braids Toughened Epoxy Adhesive Modified with Core-Shell Nanoparticles Containing Epoxy Groups on the Surface Tribological Behavior of PTFE Nanocomposites Reinforced with PBA Grafted Alumina Nanoparticles A New Method to Study the Thermal Fatigue Resistance of Molybdenum by High Power Laser Irradiation Development of Knitting Protective Sleeve Experimental Study on Infrared Spectrum Characteristics of Coal in Low Temperature Oxidation Friction and Wear Studies on Polyphenylene Sulfide Filled with a Complex Mixture Manufacturing Technique of the Biocompatible Polymer Nanofiber Membrane by Electrospinning Kinetic Compensation Effect of Kinetic Parameters of Thermal Explosion Test Numerical Simulation of the Temperature Field in Multi-Layer Powder-Feeding Laser Cladding Forming Preliminary Study of Manufacturing Technique Using Three Dimensions Stain Steel Braid for Bone Scaffold Preparation and Pore Structure of Jute-Based Activated Carbon Fibers by Microwave Assisted H3PO4 Activation Research on the Magnetic-Induced Mechanical Performances of Magnetorheological Elastomers Study on Effect Factors and Control Process of Match between Cladding Powder and Laser Beam in Coaxial Powder Feeding Laser Cladding The Application of Microwave Technology in the Anti-Felting Finishing Process Unphysical Heat Transfer by Molecular Dynamics Analysis on Lubricating and Viscosity-Temperature Characteristics of the Vegetable Oil Application of Micro-Suspended System in Bleaching Process of Natural Pigmented Animal Fiber Change in Capacitance with Pore Structure of Microcellular Foamed ABS Characterization and Performance Test of Copper Oxide Supported on Activated Carbon and Attapulgite for Flue Gas Desulfurization Curing Kinetics of Phenol Formaldehyde Resin Modified with Sodium Silicate Experimental Analysis on the Environment of Internal Plasma Spraying Techniques Studied on Interaction between ADN and (NC+NG) by TG Technology Investigation on Constitutive Equations for TA15 during Hot Working Study on Properties and Preparation of Films by Unbalanced Magnetron Sputtering Preliminary Study of the Application of PET Knitted Fabrics in Artificial Bone Scaffold Research for Knitted Fabric Made of Outlast Air-Conditioning Fiber Research for Wearability Test and Comprehensive Evaluation of Knitted Fabric Made of Jutecell Fiber Chapter 3: Mechatronics Engineering An Alternative Method to Optimize Octagonal-Ring Transducer Analysis and Control of Unknown In-Vehicle Network System Decoupling Compensation Using in the Hydraulic-Servo System of Mould Design and Preliminary Test of Tiny Remote Controlled Electric Tractor Used in Greenhouse Design and Realization of the Mobile Robot with Caterpillar Double Accused for Extinguishing Design of Gun Barrel Exterior Wall Temperature Measurement Device Design of Three-Wheel Mobile Robot Control System Design of Tower Crane Intelligent Monitoring Management System Based on PLC and WinCC Development and Experiment of ESD Simulator Console Finite Element Analysis of Four-Leg Capacitive Accelerometer Fuzzy Control Strategy of the Mixed Magnetic Levitation Bearing Rotor System General Technologies of Music Playing Robots The Application of Integrated Technique on the Control and Display Parts of Spacecraft The Research and Development of an Automotive Fault Real-Time Alarming System Moving-Average-Based CNC Simulation System with NC Instruction Interpretations On-Line Fuzzy Monitoring of Micro-Hole Drilling Based on Genetic Algorithm The Restraining of Machine Vibration Based on the Optimized Servo Control On-Line Monitoring and Fault Diagnosis System of Fan Based on LABVIEW Research of Trajectory Tracking Control of Cruise Missile Based on Observer Inverse System Decoupling Control Research of Magnetic Levitation Spherical Reluctance Driving Joint The Reliability Analysis of Multi-Operation State Repairable System Research on Embedded Roundness Measuring System Mathematical Modeling and Simulation of Spherical Switched Reluctance Motor with Magnetic Levitation Offline Programming for an Arc Welding Robot with Redundant DOF Signal Analysis Module of NC Machine Tool Based on C Language Investigation of Control Strategy for Hydraulic Auxiliary Braking of Tracked Vehicle Based on Pump Efficiency Analysis Starting Control with Constant Engine Speed for AMT Automotive Based on Neural Network The Study of Dynamic Stiffness for IC Chip Die with Parallel Mechanism Research and Design of the Biped Robot Gait Parameters Warpage Measurement of a Micro Electrical Fan on Micro-Injection Molding Dynamics Analysis of 3-TPS/TP Parallel Robot’s Moving Platform Kinematics Analysis on Humanoid Flexible Robot Hand


Best Sellers


Product Details
  • ISBN-13: 9783037854419
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 2340
  • Spine Width: 117 mm
  • Width: 170 mm
  • ISBN-10: 3037854413
  • Publisher Date: 15 Sep 2012
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 184-185 Applied Mechanics and Materials
  • Weight: 4100 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Frontiers of Mechanical Engineering and Materials Engineering: (Volumes 184-185 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Frontiers of Mechanical Engineering and Materials Engineering: (Volumes 184-185 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Frontiers of Mechanical Engineering and Materials Engineering: (Volumes 184-185 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!