Measuring Technology and Mechatronics Automation IV
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Measuring Technology and Mechatronics Automation IV: (Volumes 128-129 Applied Mechanics and Materials)
6%
Measuring Technology and Mechatronics Automation IV: (Volumes 128-129 Applied Mechanics and Materials)

Measuring Technology and Mechatronics Automation IV: (Volumes 128-129 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). This two-volume set contains 317 peer-reviewed papers from the Fourth International Conference on Measuring Technology and Mechatronics Automation (ICMTMA). The latter aimed to provide a high-level international forum where scientists, engineers and educators could present the state-of-the-art of measurement technology and mechatronics automation research and their applications in diverse fields.

Table of Contents:
Preface and Conferenze Organizers Chapter 1: Mechanic Manufacturing System and Automation A Balance Ability Evaluation Method Based on Multidimension Passive Motion Excitement from 6-PSS Robot A BP Decoding Algorithm Based on Nodes Residual for LDPC Codes and its Hardware Implementation A Dual Fuzzy Neuro Controller Using Genetic Algorithm in Civil Aviation Intelligent Landing System A Photovoltaic MPPT Strategy by Modified Fuzzy Control A Recognition Algorithm for M-QAM Based on Amplitude Distribution A Rotor Flux Observer Based on Nonlinear Quadrature Double Compensation A Self-Calibration Algorithm for Concentric-UCA in the Presence of Mutual Coupling ADAMS-Based Double Wishbone Suspension Motion Simulation and Optimization ADAMS-Based Dynamic Simulation on Driving Axle Gear Meshing ADAMS-Based Vibrating Subsoiler System Simulation Analysis Adaptive Fuzzy Velocity-Based Routing for MANET Adaptive Sliding Mode Controller Design for a Nonlinear Inverted Pendulum with Unknown Physical Parameters and its Experiment Algorithm Research of Cutter Location Path for Five-Axis NC Machining Based on Equal-Parametric Algorithm Study of Face Recognition on Improved 2DLDA An Effective CS-BP Algorithm for 2-D DOA Estimation An Improved DV-Hop Algorithm Based on Entropy for WSN An Improved Method of Mathematical Model on Current Controlled Magnetic Levitation Ball System An Intelligent Atrial Fibrillation Wireless Monitoring System Based on Nonlinear Bind Source Extraction Algorithm Analysis and Sensitivity Evaluation of AE Signals and Vibration Signals for Fault Diagnosis of Low-Speed Rotating Machinery Application of Arithmetic Operations Method in Single Pair-Pole Magnetic Encoder Controllability of Discrete-Time Multi-Agent Systems with Leaders via Switching Topology Controlling Chaos in Permanent Magnet Synchronous Motors by Cascade Adaptive Approach Dam Deformation Monitoring Model Based on Neural Network with Ant Colony Optimization Algorithm Delay Loop Current Control Methods of Shunt Active Power Filter Delay-Dependent Non-Fragile Robust Guaranteed Cost Control for Switched Systems with Multiple Time Delays Diagnosis for Vibration Fault of Steam Turbine Based on Modified Particle Swarm Optimization Support Vector Machine Dynamic Location Allocation Optimization for PDP Panel Aging Stereoscopic Warehouse Eye Statement Recognition for Driver Fatigue Detection Based on Gabor Wavelet and HMM Face Detection Method Based on SSR Algorithm Face Recognition Method Based on the Fuzzy Neural Network High Accuracy Algorithm of Airborne Interferometric Synthetic Aperture Radar High Altitude Airship Flight Control System Design and Simulation Human ADL Signal Transmission System Optimization Method Using Bayesian Network Based on Wireless Sensor Network IMC-PID Design with Time Delay Compensation for Multivariable System Based on V-Norm Decoupling Improved EEMD Applied to Rotating Machinery Fault Diagnosis Improved Wavelet Algorithm on Image Denoising Processing Intelligent Built-in Test Fault Diagnosis and Prediction for Mechatronics Equipment Intelligent Control Method of Ground to Air Missile Based on FCMAC Intelligent Information System Design on Water Quality Monitoring, Water Bloom Prediction and Emergency Treatment Decision-Making Intelligent Temperature Control of Ceramic Kiln Based on Data Fusion Technology Median Morphological Filter Design Based on the PSO Algorithm Method of Parallel Active Power Filter Compensation on 3-Phase 3-Wire Nonlinear Unbalanced Load System Monitoring of Winding Deformation of Power Transformer by Using Nanosecond Pulses New Estimations of Bounds for the Chu Chaotic System NIR Detection of Alcohol Content Based on GA-PLS Regulation of PID Controller Parameters Based on Ant Colony Optimization Algorithm in Bending Control System Requirements of Level Arm Measurement Precision in Airborne Gravity Research about Separation of the Surface Geometry Error for Large-Scale Holes Based on Wavelet Transform Research on BIT Intelligence Maintenance Decision of Weapon Materiel Research on Scene Matching Algorithm in the Vision-Aided Navigation System Research on the Magnitude Time Series Prediction Based on Wavelet Neural Network Research on the Marine Corrosion Model of Ferrous Metal Based on PLS and Grey Relational Analysis Research on the Suppression of Input Power Disturbance for Single-Phase Photovoltaic Grid-Connected Inverter Research on Ultra-Low-Bit-Rate Speech Coding Algorithm for Underwater Speech Communication Reserch on Cutting Depth Effect in Cutting Process Reusable Design of CAN Bus Controller IP Core Review of the Tele-Calibration Technology Robotic Waist Mechanism Driven by Dielectric Elastomer Actuators Robust Adaptive Control Based on Specified Region Pole Assignment for Flexible Hypersonic Vehicle Robust Fault Detection for Singular Stochastic Systems Selection and Optimization in Vibration Isolation Structure of Marine Podded SSP Propulsion Solutions of Single Point of Failure in Intrusion Detection System Solving Collaborative Manufacturing Resources Optimization Deployment Problems Based on Improved DNA Genetic Algorithm Solving Decision Problems with Mathematical Expectation Spectral Data Modeling Based on Feature Extraction and Extreme Support Vector Regression Spectral Properties of Broadband Pumped Optical Parametric Amplification Spline Function Method Analysis Nature Frequency of Annular Foundations Study on Data Acquisition and Measurement System of Occupant Restraint Test Bed Study on Driving Characteristics of Discrete Rod by Different Initiation Styles Study on Electromagnetic Exciting Force Characteristics and Electromagnetic Noise of Permanent Magnet DC Motor Study on Four Parameters Estimation’s Methods of Time-Series Model in Modeling the Signal of a Quartz Flex Accelerometer Study on Technology of Human Body Surface Reconstruction Based on Reverse Engineering The Algorithm of VLBI Wide-Band Correlation and CE-2 Broadband Signal Processing Type II Sleep Mode Operation for IEEE 802.16e Based WiMAX Unsteady Characteristics over Dynamic Delta Wings Variance Based Identification of Phase Transition in Duffing Oscillator for Weak Signal Detection Chapter 2: Material Science and Technology in Manufacturing A Damage-Coupled Time-Dependent Multi-Axial Fatigue Failure Model for Solder Alloy 63Sn-37Pb Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading Analysis of Copper Wires Residues in Fire Investigation Comprehensive Testing Instrument on External Characteristics of Magnetically Controlled Shape Memory Alloy Contact Analysis of Sealing Rings for Welding Bellows Mechanical Seal Effect of Porous Structural Parameters on Ultrasonic Attenuation Capacity of Porous Al Alloy with High Specific Strength Granular Structure Merging Algorithm Based on Category Theory Influence of Pressure Amplitude on Formability in Pulsating Hydro-Bugling of AZ31B Magnesium Alloy Sheet Mechanics Analysis of the Vibrating Subsoiler System Considering Material Acting Force Preparation and Characterization of Molecular Imprinted Polymers of Tetracycline Antibiotics by Mixed-Templates Primary Modeling and Survey of 4H-SiC Based Metal-Semiconductor-Metal Ultraviolet Sensor with Novel Electrode Structure Research on Molten Iron Vertical Flow Rate and Level Based on Dynamic Infrared Radiation and Time Intervals Research on Nonlinear Stiffness Characteristics of Hydro-Pneumatic Spring Research on Performance of Sasobit Warm Mix Asphalt and Influence of Aging Using DSR Research on the High Temperature Properties of Sasobit Warm Mix Asphalt Mortar Surface Roughness Measuring System Design for Cutting Workpiece Based on Machine Vision Technology Chapter 3: Sensor, Test and Signal Processing A Cellular Intrusion Detection Framework for Packet Dropping Attacks in Wireless Sensor Networks A Detection Circuit to Faint Signal for Difference Absorption Gas Sensor A Frequency Tracking Method Based on Improved Adaptive Notch Filter for Coriolis Mass Flowmeter A Natural Image Compression Approach Based on ICA and Visual Saliency Detection A New Method Based on HMMs and K-Means Algorithms for Noise-Robust Voice Activity Detector A New Referenced Signal Detection Method Adaptive to Multi-Objective Control of Active Power Filter A Novel Corner Detection Based on Improved SUSAN Model A Novel Method for Measuring the Open-Circuit Loss and Short–Circuit Loss of Distribution Transformers Online A Novel Precision Strain Measuring Circuit with Double-Channel Method A Novel Skin Image Detection Method Based on GMM and GAs A Side-Coupled Optical-Fiber Liquid Level Sensor A Simplified Cascaded Modular Structure for the Implementation of MVDR Detector A Skew Detection Algorithm for PDF417 Based on Feature Point An Adaptive Wavelet Shrinkage and its Application in Image De-Noising An Automatic Singing Evaluation System An Autonomous Predictive Centroiding Algorithm for Star Sensor An Energy-Balanced Clustering Routing Protocol for Wireless Sensor Networks An Image Hided-Data Detection Method Combining Markov Chain and Support Vector Machines An Imaging Processing Method for Linear Array ISAR Based on Image Entropy Application of Bidimensional Empirical Mode Decomposition to Medical Liquid Opacity Detection Applying Ad Hoc Network on Unknown Environment Detection Blind Separability of Reverberation and Target Echo Based on Spatial Correlation Calibration of Pressure Sensor in Automobiles Based on ZMD Chip Comparison of Single-Layer and Multi-Layer Laser Scanners for Measuring Characteristic Comparison of Synchronizing Speed Limitations of Networked Lorenz Oscillators when Coupling Strength Tends to Infinity Component Spectrum Recognition for Mixed Gas Based on SVM Design and Application of a Measuring and Diagnosing System Based on Networked Virtual Instrument Design and Fabrication of an Electromagnetic Stress Sensor Development of Fault Diagnosis System for Telemetry Equipment Based on the Virtual Instrument Technology Development of Ultrasonic Automatic Testing System for Flaws of Rotary Parts Difference Absorption Optical Fiber Methane Gas Sensor Based on FBG Effect of Image Motion and Vibration on Image Quality of TDICCD Camera Fusion of Infrared and Visible Image Based on Target Regions for Environment Perception Identification the Low-Frequency Oscillation Stakeout of Power System by Wide-Area Measurement System Image Displacement Detection under Low Illumination Using Joint Transform Correlator with Wavelet Denoising Inter-Pulse Spectroscopy Based on Room-Temperature Pulsed Quantum-Cascade Laser for N2O Detection Measurement and Analysis of the Circuit Delay of CEI System Measurement of Tracking Accuracy of Antenna Using Precise Geostationary Satellite Orbit Measurements and Predictions of Steady-State and Transient Temperature Distributions of a Gasoline Engine Multi-Node Spectrum Sensing Based on a Novel Dempster-Shafer Theory Multi-Robot Control System Based on Wireless Network Multi-User Detection of DS-CDMA Based on Improved-FastICA An Application Study to the Ciphers Weighed in Faithful Transmission Neighbor-Based Adaptive Listening and Sleeping Scheme for Wireless Mesh Sensor Networks Node Deployment of Wireless Sensor Networks in Long Narrow Area On-Line Oil Monitoring Sensors Fusion for Aircraft Health Management Online Temperature Detecting System in Hot Machining Process Portable Fault Testing Device of Electronic Instrument Based on PC 104 Bus Practical Technologies Research of Line Structured Light Three-Dimensional Profile Measurement at Low-Cost PZT Sensors and their Application in Structural Health Monitoring Reducing False Negatives in Intelligent Intrusion Detection Decision Response System Research of Active Detection Technology Using Vector Array on Small Platform Research of DC Current Measurement Technology Based on Optical Fiber Thermometry Research on FBG Spectral Optimization with Particle Swarm Optimization Algorithm Research on High Precision and Non-Contact Measuring System for Geometric Parameter of the Irregular Shape Research on Note Location of Wireless Sensor Network in Logistics Transportation Research on Operational Model of New-Generation GPS Based on Dynamic Description Logic Research on Temperature Monitoring System for Electrical Equipment Based on Wireless Sensor Networks The Analysis of Miss Distance Sensitivity to Target Maneuvers for the Terminal Guidance System The Application of Multiple Attribute Decision Making on Radio Signal Searching The Detection of Soil Parameters by Portable near Infrared Spectrometer The Route Algorithm of Post-Disaster Road Monitoring System The Safety Monitoring of Colliery Equipments Based on Data Mining Technology The Study of Low-Power Consumption Heat Meter Based on MSP430 The Study of the Dual-Wavelength Fiber-Optic Temperature Sensor Video Signal Capture and Processing Card Based on H.264 Hardware Encoder Voice Activity Detection with Decision Trees in Noisy Environments Voltage Dip Analyzing Method for Multiple Faults Condition in Complex Power Network Chapter 4: Fault Diagnose and Electronmechanical Control A Control Method of Hypersonic Vehicle Based on the Structured Singular Value Theory A Control System of Binocular Eyes Based on DSP TMS320F2812 A Cooperative Co-Evolutionary Controller for AC Induction Motor A Fluid-Driven Path Controllable Drilling Device with 3-DOF Hydraulic Steering System A Hybrid Intelligent Excitation Control for Ship Power Station A SPWM Control Method for Dual Buck Half Bridge Inverter Based on the Direction of Inductor Current A Study of MRife Algorithm and CSB Algorithm on Frequency Online Estimation A Study of Processing of the Leakage Signal for Single Antenna LFMCW Radar Altimeter A Study on an Effective Motion Tracking Algorithm Analysis on Application of HCCI Technology for Hybrid Electric Vehicles Application of Disturbance Rejecting Fuzzy Controller in Electric Arc Furnace Application of Fuzzy PID for the Ventilation and Air Conditioning System of Subway Station Based on Fuzzy PID Control’s Research of Control of Concentration of Sub-Nanometer Wood Flour Direct Torque Control of Permanent Magnet Synchronous Motor Based on Fast Terminal Sliding Mode Distributed High-Precision Field Testing System of Construction Machinery Based on CAN Bus Driving Belt Conveyor Based on Long-Term Transmission Inverter Dual Mode Braking System Design of a HEV Effect of Yaw Angle Error in an Aircraft’s Aerial Triangulation Electric Vehicle Forecasting for China from 2011 to 2050 Based on Scenario Analysis Engine Failure Data Analysis Method Based on Weibull Distribution Model Error Analysis of Mechanism with Clearances and Fuzzy Control Failure Modes and Countermeasures of Working Device of a Heavy Vehicle Fault Diagnosis of CNC Machine Using Hybrid Neural Network Fault Diagnosis of Power Quality Flipping PTS-OFDM System without Side Information FPGA-Based Design of Resource-Efficient Digital down Converter Fuzzy Control System of Titanium Dioxide Hydrolysis Process Fuzzy Depth Control of Small Cylindrical Object Navigating near Free-Surface Fuzzy Immune PID Control for 6-DOF Parallel Platform H∞ Control of Flexible Joint Robot via T-S Fuzzy Model Hardware-in-Loop Electronic Throttle System Based on Simulink Local Stiffness and Dexterity Analysis of a 3-SPS-S Orientation Fine-Tuning Manipulator for Segment Assembly Robots in Shield Tunneling Machines Localization Algorithm Based on DV-HOP for Wireless Sensor Network Nonlinear Analysis of Transmission Tower Structure by Three FEM Models Nonlinear Behaviors of Giant Magnetostrictive High Power Ultrasonic Transducer Nonlinear Resonant Generator for Harvesting Energy from Human Wrist Vertical Shaking On-Line Fault Intelligent Monitoring Diagnosis System of Blower Partial Discharge Pattern Recognition of Power Transformer by Using Information Fusion Penetration Acceleration Signal Overload Rigid Separation Base on Local Mean Decomposition Petroleum Instrument Fault Analysis Based on the Data Mining Fault Dictionary Method Pinning Synchronization of Complex Dynamical Networks with Time Delay PLC Control System Design for Automated Storage and Retrieval System Presentation, Implementation and Application of a High Speed Hamming Distance Generator Real-Time Database System Implementation of Railway Signal Power Source Remote Monitoring Real-Time Simulation Study for a Series Hybrid Electric Vehicle Research and Implement of Measuring the Errors of Transformers with Actual-Burden Using Programmable Digital Synthesizing Three-Phase Power Supply Research for CAN Node Fault Rapid Detection Based on OSEK Network Management Research of De-Couple Control System for near Space Vehicle with High Maneuver and Couple Research of Dynamic Compensation for Hysteresis Nonlinear Research of Flow and Pressure Pulsation in Aircraft Deicing System Selection of Optimal Measure Project for Automatic Test System Self-Optimized Nonlinear PID Controller for Networked Chaotic Systems to Synchronize onto Arbitrary Orbit Semi-Physical Acoustic Vision Simulation System of Autonomous Underwater Vehicle Shaping Law and Motion Design in NC-ECM under Effect of Twiste Angle Significance Tests on Design Factors Affecting the Frequency Performance of Spherical Cymbal Transducer Storage Test Techniques and Wireless Transmission Based on Embedded System Study on a Control Method Used in the Semi-Active Suspension Study on Control Parameters in the Acceleration of Axial Flow Blood Pump Study on Control Technique of Dynamic Hysteresis for Active Inverter Study on Load Characteristics of a Mini Permanent Magnet Synchronous Generator for Wind Power Study on Operation Control Strategy of Single Piston Hydraulic Free-Piston Diesel Engine Study on Overhead Crane Anti-Swing System with Self-Adjustable Fuzzy Control Study on Quantitative Detection of Pesticide Residue Based on Spectroscopy Technology of Differential Absorption Study on Soft Sensor Modeling and Optimization Control of Biological Fluidized Bed Swage Disposal Superheated Steam Temperature Control Based on Improved Recurrent Neural Network and Simplified PSO Algorithm Switched Control Strategy for Networked System with Multi-Rate Input Sampling Target Fusion Algorithm for Remote Sensing Image Recognition Target Tracking Approximation Algorithms Based on Particle Filters and near-Linear Curve Simplified Optimization in WSN Temporal Feature Characterization via Dynamic Hidden Markov Tree The Application Research on Image Fusion Technology in Tires Sorting Control The Construction and the Management of Electric Vehicle Charging Network The Construction of Network Virtual Laboratory for Measurement and Control Technology of Panzhihua University The Fault Diagnosis of Automotive Airbag Assembly Process Based on Self-Organizing Feature Mapping Network SOM The FPGA Implementation of NLMS Adaptive Interference Cancellation Algorithm Vehicle-Classification Based on Edge Extraction and Background Difference Vibration-Based Structural Damage Identification Using Grey Forecasting Model Chapter 5: Model and Optimization and Simulation Application of Knowledge Based Engineering in Building Mould Standard Components Application of Optimal Fitting in the Static Thrust Line Measurement of Solid Rocket Motor Braking Distance Estimation by Simulation Brief Introduction of Brake Line Pressure and Brake Torque Transmission Model Development and Validation of Offset Deformable Barrier Model with Beam Element Development of Configuration Software Interface for Engineering Vehicle Supervisory Control and Management Heat and Mass Transfer Finite Element Simulation of Clay Ceramic Prototype in High-Temperature Drying Kinematic and Modal Simulation Analysis of the Bionic Eye Based on Spherical Parallel Mechanism (SPM) Knowledge-Based Classification Method for Urban Area Objects Feature Extraction Based on LIDAR Points Modal Sensitivity Analysis for Series Harmonic Resonance in Power System Modeling and Simulation of Diesel Propulsion System in Maneuvering Navigation Condition Modeling, Analysis and Optimization of Three Degree of Freedom Automobile Handling and Stabilities Model Modeling and Simulation of a Novel Hydraulic Disc Brake for Truck-Mounted Drilling Rig Modified Projective Synchronization of Chaotic Systems with Unknown Parameters Optimization Design of Excitation Strategy on Vibrating Wire Sensor Optimization for Dynamic Performance of the Fiber Optical Voltage Transformers Optimization of Vehicle Tailpipe Hook Stiffness Research on Extracting Cyclostionary Statistics of Amplitude-Modulated Signals Based on Cumulant Research on Mathematic Model and Measuring Method of Moving Beam Attitude in Large Forging Hydraulic Press Research on the Energy Saving Potential of Official Cars in China Simulation and Analysis on Vehicle Frontal Crash Based on Virtual Proving Ground Simulation and Research on Maximum Efficiency of Permanent Magnet Synchronous Motor Driving System Simulation and Control System of Camera Robot Study on the Date Generation Process of Chinese Thermal Power Study on the Mathematical Simulation of Galvanic Coupling IBC with Different Signal Transmission Paths The Dynamics Analysis of Full Mounted Converter Vessel Tilting Mechaism The End-Point Ingredient Prediction of Low Carbon Ferrochrome Smelt Based on the Working Condition The Model and Algorithm of Doppler Radar Speed Measurement System The Model and Simulation of Hydraulic Non-Sinusoidal Vibration System on Billet Caster Crystallizer The Optimal Attitude Controller Design and Simulation of Three-Axis Dual Rotor Helicopter The Principal Component Analysis of Signal Characteristic Parameters The Simulation Analysis of Structure Type Effect on Cutting Process The Simulation Analysis of Tool Orthogonal Rakes Affecting Metal Cutting Track Initiation Based on Extended Trellis and Randomized Hough Transform Wood Board Defects Sorting Based on Method of Possibilistic C-Means Improved Support Vector Data Description Study of Vehicle Engine Transient Emissions Chapter 6: Computer Aid Design Analysis of OCR Design and Implementation for GUI Modeling Development the Cam Design System Based on VC++ Finite Element Analysis of Impact Plunger and Drill Rod and Optimization Design for Drill Rod of YC70 Hydraulic Impactor Finite Element Analysis of the Screen Box of the Combined Vibrating Screen Based on ANSYS Information Complexity of Monte Carlo Integration in Multivariate Functions with Mixed Smothness Research on an Improved Self-Correcting Location Algorithm for Wireless Local Region Software Design for Centralized Monitor of Chang’E-1 Operational Simulator Software Design of Networked Virtual Instrument System Chapter 7: Design and Practice Automobile Panel Reverse Engineering Design Based on NURBS Surface Reconstruction Technique Automobile Stamping Parts Quality Inspection and Analysis Based on ‘Geomagic Qualify’ Software Based on FE Method to Research Resistant Rutting Ability of Pavement Structure in Heilongjiang Province Colorful Limit Fractal Patterns with Evolving Planar Symmetry from Dynamics Comparison of Detrending Methods in Frequency Domain Analysis of R-R Interval Series Design and Implementation of a Simulation System for Armored Communication Countermeasure Training Design and Implementation of a Voltage Booster Circuit for High-Pressure Injector Drives in GDI Engines Design and Implementation of H.264/SVC Decoder Forecast Module on ASIC Design and Precision Analysis of Muzzle Angle Measurement System Design and Realization of High-Speed and Real-Time Signal Processing System Based on FPGA Design and Simulation of High Altitude Air-Launched Automatic Underwater Vehicles Design of H∞ Robust Control for Shunt Active Power Filter Based on the Mixed Sensitivity Method Design of a Sliding Mode Control with a Nonlinear Continuous Time-Varying Switching Surface Design of Elastic Cell in Pressure Sensor Design of Monitoring System for Frequency Converter Sets Based on PCI Bus Design of the Environment Multi-Parameters Recorder Based on MSP430 SCM Design of the Transpire Freight Impact Test System Based on ASTM D6537 Design on Piezoelectric Converter for Electronic Safety System Dynamic Optimization Design of Engine Crankshaft Dynamic Properties on Double Driving Articulated in-Pipe Robot Inspecting System EEG Signal Classification by Global Field Power Error Analysis for Correlation Algorithm Based Servo Valve Frequency Characteristic Measurement Error Analysis of Triangular Laser Measurement System Error Comparison of Different Acoustic Infinite Element Experiment Study and Design of Measurement System of the Total Electrical Field on the Ground Level under HVDC Transmission Lines Experimental Research of Solar Wall in Building Application Experimental Research on a Certain Light Truck Cab Suspension System Effect on Ride Comfort Study on Balance Scheduling Based on the Gasholder Level Prediction for Blast Furnace Gas System in Steel Industry Sustainability-Oriented Product Modular Design Using Design Structure Matrix (DSM) Method The Design of Constant-Flow Bump Control System Based on BP Neural Network The Design of Electric Power Optical Cable Circuit Automatic Monitoring System Based on PC Computer The Research and Design of Portable Leaf Disease Spots Image Acquisition System The Research of Companding Transform for Peak-to-Average Power Ratio Reduction of OFDM Signals The Research of Spectral-Line Monitoring of Transformer Vibration The Research of Static Friction Coefficient Measure Technology and Calibration Method for Traffic Engineering The Research of Subsea Electronic Module for Subsea BOP The Design and Implementation of a Communication Mechanism of Centralized Body Control Module


Best Sellers


Product Details
  • ISBN-13: 9783037852842
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1650
  • Spine Width: 83 mm
  • Width: 170 mm
  • ISBN-10: 3037852844
  • Publisher Date: 23 Jan 2012
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 128-129 Applied Mechanics and Materials
  • Weight: 3200 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Measuring Technology and Mechatronics Automation IV: (Volumes 128-129 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Measuring Technology and Mechatronics Automation IV: (Volumes 128-129 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Measuring Technology and Mechatronics Automation IV: (Volumes 128-129 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!