New Polymer Composite Materials II
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Medicine & Health Science textbooks > Medicine: general issues > New Polymer Composite Materials II: (Volume 869 Key Engineering Materials)
New Polymer Composite Materials II: (Volume 869 Key Engineering Materials)

New Polymer Composite Materials II: (Volume 869 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This issue of the journal presents materials of the XVI INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE «NEW POLYMER COMPOSITE MATERIALS», which was held in the Kh.M. Berbekov Kabardino-Balkarian State University. The content of the presented papers reflects the results of research in the field of polymer synthesis and the development of new polymer composite materials, as well as the various aspects of their application.

Table of Contents:
Preface The Use of Composite Polymeric Materials to Increase the Effectiveness of Ship Ventilation Systems Thermoplastic Characteristics of Polymer Composite Materials Used for the Manufacture of Ship Systems Pipelines Synthesis of Aromatic Polyethersulfones High Performance Aromatic Polyethersulfones Introduction of Nanoscale Porous Aromatic Frameworks in PTMSP Matrix Synthesis of Poly-N,N–Dialylaminoethanoic Acid and Investigation of his Mutagenic Action on the Test System Drosofila Melanogaster Gas Separation Membranes Based on Germanium Containing Polyalkylenesiloxane Influence of Casting Method on Pervaporational Performanses of Polyheptylmethylsiloxane Membranes Concerning the Application Possibility of Ultrasonic Welding of Textile Materials on the Basis of Synthetic Fibres in the Manufacturing Processes of Parachute Systems Exploring the Complexation of Counterion in Novel Family of Polyelectrolytes with Unexpected Solubility Behaviour Infrared Spectrum and Thermal Properties of LDPE, EVA and Fly Ash Composites Morphology and Mechanical Properties of LDPE, EVA and Fly Ash Composites Optimization of the Reaction of Catalytic Cycloalkylation of Phenol with Cyclohexene Application of Adhesives in Cosmetology Sealing Materials Based on Polymers Medical Nonwovens: Effects of Radiation Sterilization on Bursting Strength Obtaining Nanofibers Na-CMC in Mechanomagnetic Activated Water Solution for the Purpose of Reinforcing Concrete Structure The Catalytic Synthesis of Wholly Aromatic Polyesters Based on 4-hydroxybenzoic Acid via Direct Esterification Metal-Containing Monomers Based on Copper and Zinc Salts of Unsaturated Acids and Pendent 4-phenyl-2,2′:6′,2′′-terpyridine Ligands: Synthesis, Characterization and Thermal Properties Photopolymerization of OCDMA Dimetacrylate Initiated by 3,5-Di-tert-Butyl-o- Quinone and its Bis-O-Benzoquinone Determination of the Composition of Substances Migrating from Plugs Based on Bromo-Butyl Rubber into Infusion and Injection Preparations The Effect of Thermal Degradation Processes on the Physical-Mechanical and Rheological Properties of Polyketone Composite Bitumen Binders Based on an Active Powder of Discretely Devulcanized Tire Rubber One-Component Urethane Sealants Synthesis Reinforcement of Elastomers Based on Butadiene Rubbers and their Mixtures with Layered Silicates Synthesis and Application of Copolymers Based on Styrene, Divinylbenzene and Functionalizing Monomers Unsaturated Polyester Resins and Fiber-Reinforced Polymer Composites from Plant Biomass New Plasticizers on the Based on 2,5-Furandicaboxylic Acid and 5,5-Oxy-Bis(methylene)bis-Furane-2-Caboxylic Acid Diesters Triethylene Glycol Dehydration by Thermopervaporation Properties of Hyperbranched Polyglycidol’s Derivatives Numerical Model of the Mass Transfer Transition States in the Vacuum Infusion Process of the Polymer Matrix and the Reinforcing Filler Structure Modeling of Residual Stresses in a Polymer Cylinder Arising from Rotation and Cooling of the Starting Material Rheological Aspects of Multilayered Thick-Wall Polymeric Pipes under the Influence of Internal Pressure Complex Stabilizer Based on Calcium and Zinc Stearates for PVC Compounds Modification of the Recipe of Industrial PVC Plastic for Increasing its Fire Resistance Effect of Technical Carbon the Deformation-Strength Properties of Low Pressure Polyethylene Influence of Different Factors on the Oxidizing Polymerization of 3-Amino-3 ́-Nitrodiphenylazomethine and some Properties of the Received Polymer Organic Aerogels Based on Epoxy Resins: Synthesis and Properties Charge Propagation along the Polymer Fiber of Polyhydroxybutyrate: Is it Possible to Apply the Cable Model? The Aging, Biodegradation and Toxic Effects of the Polymer Biomedical Implants in Dental Practice Preparation of R-BABP Polyimide Fibers via Wet Spinning of Polyamide Acid Optimization of Structure of Soft Block for Design of Adaptive Polyurethanes The Thermal Stability and Mechanical Properties of Non-Segregating Blends of Polyimides with Copoly(Urethane-Imide)s Effect of Non-Equilibrium Low Temperature Plasma on Genuine Leather Adhesion Properties of Special Purpose Footwear Upper to Molding Compositions with Polyurethanes Base Synthesis and Properties of Polymers Based on N-Vinyl-Pyrrolidone and Halogen-Containing Compounds of Acrylic Acids Phase Transitions in Polyester-Polyether Copolymers The Influence of Biopolymer Coated Fertilizer on the Agrochemical Parameters of the Soil CO2 Absorption/Desorption on Gas-Liquid Membrane Contactors Using Monoethanolamine Solvent: Comparison of Porous and Composite Hollow Fibers Composite Reinforcement as a Way to Increase the Durability of Building Structures Study of the Influence of the Forming Method on the Physical and Mechanical Characteristics of Thermoplastic Polymeric Materials The Effect of Inorganic Fillers on the Polyaniline Synthesis Isomerization of Allyl Derivatives of Bisphenol A Working out the Method of Obtaining Radio-Absorbing Composite Material Based on Magnetite Nanoparticles and Polydimethylsiloxanes Effect of Annealing on Proton Conductivity of Aquivion-Like Proton-Exchange Membrane Thermal Properties of Poly(3-(2′-Ethyl)Hexylthiophene): Study with a Real-Time Combination of Synchrotron X-Ray Scattering and Ultrafast Chip Calorimetry Optimization of Film Composite Functional Properties for Sewing Products Development of Approaches for Producing Polymeric Composite Materials with Higher Strength The Effect of Surface Treatment of PET Films on Adhesive Properties The Modeling of Interfacial Contacts in Composites Using the Sitting Drop - Solid Body System as an Example Pervaporation Separation of Toluene/TEG Mixture with PIM-1 Membrane Bio-Based Anti-Corrosion Polymer Coating for Fuel Cells Bipolar Plates Polymeric Composites for Filling Bone Cavities Research of Structure and Properties of Rubber Mixtures with Adhesion Additives on the Basis of Carbamide Cross-Linked PIM-1 Membranes with Improved Stability to Aromatics Preparation of Fine Porous Ultrafiltration Membranes from Polyacrylonitrile Properties of Polysulfone Hollow Fiber Membranes Depending on the Method of the Spinning Solution Preparing Roofing Materials Based on Synthetic Rubbers with Additives - Waste Products Synthesis of Aromatic Polyether Ketones by Electrophilic Substitution 3D-Printing Methods for Crystalline Polyetheretherketone Investigation of the Effect of the Length and Content of Carbon Fibers on the Properties of Polyphenylene Sulfide Influence of Concentration of Carbon and Glass Fibers, Melt Viscosity, and Number of Extrusions on the Porosity of Composites Based on Polyphenylene Sulphone, Polyethyrimide and Polyphenylene Sulfide The Effect of Sizing Additives for Carbon Fiber on the Mechanical Properties of Polyetherimide Composites Study of the Effect of Organoclay on the Structure of Cable PVC Compound Biologically Destroyable Polymer Compositions with the Use of Natural Filler Kinetic Features of Isophorone Diisocyanate and Oligoesterdiols Reaction under Waterborne Polyurethane Synthesis Conditions and the Preparation of the Polymer Dispersions The Influence of Phases Division Surface in Nanocomposites Polymer/2D-Nanofiller on their Reinforcement Degree - The Percolation Model Features of Formation of a Multifilament Yarn from Crystallizing and Amorphic High-Heat Resistant Thermoplastics On the Synthesis of Copolyarylene Ether Ketones by Nucleophilic Substitution Reaction The Effect of Water on the Thermal and Thermooxidative Destruction Processes of some Polyheteroarylenes Investigation of the Ability of the Organophosphorus Compound Tetrakis(2,4-Di-Tert-Butylphenyl)-4,4'-Biphenyl Diphosphonite to Polyetheretherketone Stabilize The Influence of Sparse Filling of FDM-Printed Samples on Mechanical Properties of Polyphenylene Sulfone and a Carbon-Filled Composite Based on it Modification of Industrial Polyphenylene Ether Sulfone by New Block Copolymers Containing Oxime Groups Features of Obtaining Carbon Plastics Based on Superstructural Polymer Materials Synthesis of Aromatic Diketoximes and their Complexes with Nickel Salts Composite Materials Based on Natural Polysaccharides and Polyguanidines Glass-Filled Composite Materials Based on Polyarylene Ether Sulfones Bio-Based Conductive Polymer Composite Materials for Fuel Cells Bipolar Plates


Best Sellers


Product Details
  • ISBN-13: 9783035738001
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 869 Key Engineering Materials
  • ISBN-10: 3035738009
  • Publisher Date: 27 Oct 2020
  • Binding: Digital download and online
  • No of Pages: 618


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
New Polymer Composite Materials II: (Volume 869 Key Engineering Materials)
Trans Tech Publications Ltd -
New Polymer Composite Materials II: (Volume 869 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

New Polymer Composite Materials II: (Volume 869 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!