Achievements and Trends in Material Forming - Bookswagon UAE
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Mathematics and Science Textbooks > Physics > Applied physics > Achievements and Trends in Material Forming: (Volume 926 Key Engineering Materials)
Achievements and Trends in Material Forming: (Volume 926 Key Engineering Materials)

Achievements and Trends in Material Forming: (Volume 926 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This book contains papers presented at the 25th International Conference on Material Forming (ESAFORM 2022, 27-29 April 2022, Portugal). The European Scientific Association for material FORMing - ESAFORM - is a non-profit scientific association founded in January 1997 with the aim of propagating knowledge and advances in topics connected to forming processes for all types of structural materials. The present volume covers a wide range of research results and engineering solutions in technologies of materials forming and will be useful for many researchers and engineers from the machinery production area.

Table of Contents:
Preface Chapter 1: Plenary Lectures Material Forming Digital Twins: The Alliance between Physics-Based and Data-Driven Models Machining of Additive Manufactured Metal Alloys Chapter 2: Additive Manufacturing Characterization of Surface and Bulk Features of SLM Parts From Theory to Practice: Development and Calibration of Micro Pellet Extruder for Additive Manufacturing A Comprehensive Analysis of AISI 316L Samples Printed via FDM: Structural and Mechanical Characterization Study of Bonding Mechanisms in Cold Spray of Metal-to-Polymer through a Numerical Approach Laser Metal Deposition with Coaxial Wire Feeding for the Automated and Reliable Build-Up of Solid Metal Parts Material Characterization of Hybrid Components Manufactured by Laser-Based Directed Energy Deposition on Sheet Metal Substrates Optimization of Laser Metal Deposition Process for 2205 Duplex Stainless Steel Comparison of Scan Strategies for Side Roughness Optimization of Al6061-Zr Alloy Produced by Laser Powder Bed Fusion (L-PBF), Benefits and Drawbacks on Different Part Profiles Influence of Geometric Parameters on Buckling Behavior of 3D Printed Anisogrid Structures Cold Sprayed Metallic Coatings on Fibre-Reinforced Composites: A Machine Learning Approach for the Optimization of the Process On the Influence of Cross-Section Size on Measured Strength of SLM-Produced AlSi10Mg-Alloy Experimental Setup for Fatigue Testing of Additively Manufactured Specimens Selective Laser Melting of Ti-6Al-4V Lattices: Case Study on a Spinal Cage Prosthesis Maximizing the Resolution Range of Addictive-Manufactured Miniature-Scale Force-Sensing Devices for Biomedical Applications Acoustic Performances of Polymers Hierarchical Structure Produced with Material Jetting Technology Efficient Build-Up of High-Strength Aluminum Structures Using Friction Stir Additive Manufacturing Experimental Investigation of Efficiency and Deposit Process Temperature during Multi-Layer Friction Surfacing 18Ni300 Maraging Steel Produced via Direct Energy Deposition on H13 Tool Steel and DIN CK45 Exploring Potentialities of Direct Laser Deposition: Thin-Walled Structures In Silico Finite Element Approach on Mechanical Behavior in Superelastic Nitinol Silver Nano-Colloid Characterization for Printing Application Selective Laser Melting of Ti6Al4V: Effects of Heat Accumulation Phenomena due to Building Orientation Investigating the Melt-Pool Temperature Evolution in Laser-Powder Bed Fusion by Means of Infra-Red Light: A Review Laser Powder Bed Fusion of Aluminium Alloy 6061 for Ultra-High Vacuum Applications The Analysis of Small-Scale Notches on the Fatigue Performance of SLM Ti-6Al-4V; A Theory of Critical Distances Approach Flexible and High-Precision Integration of Inserts by Combining Subtractive and Non-Planar Additive Manufacturing of Polymers Laser-Powder Bed Fusion of Inconel 718 Alloy: Effect of the Contour Strategy on Surface Quality and Sub-Surface Density Metamaterial Mechanical Performances: A Single Cell Analysis Discontinuous Galerkin FEM with Hot Element Addition for the Thermal Simulation of Additive Manufacturing Prediction of Solid-State Phase Transformations for the Ti-6Al-4V Alloy Assessing the Accuracy of Different Remapping Methods in Adaptive Mesh Refinement Uncertainty Quantification in the Directed Energy Deposition Process Using Deep Learning-Based Probabilistic Approach Thermal Modeling of Laser Powder Bed Fusion during Printing on Temperature-Unstable Materials Considering Local Sintering Effect of Finite Element Mesh Size and Time-Increment on Predicting Part-Scale Temperature for Powder Bed Fusion Process 3D Modeling of Polymer Selective Laser Sintering Process: Laser-Polymer Interaction Modeling Porosity Prediction in AM Using PBF-LB Employing Time-Series Classification Modelling Thermoplastic Filaments’ Sintering by Level Set Method Ultrasonic Monitoring of Part’s Height and Layer Thickness in Powder Bed Fusion Chapter 3: Extrusion and Drawing Metal Forming-Induced Residual Stresses and Rule of Mixtures’ Prediction of Tensile Behavior of Bimetallic Wires Process Stability and Reproducibility of the Dieless Drawing Process for AZ31 Magnesium Wires Characteristics of the Combined Rolling and Extrusion Process Effect of Temperature on Surface Cracking Defects in AA7075 Hot Extrusion Modeling Friction in HyperXtrude for Hot Forward Extrusion Simulation of EN AW 6060 and EN AW 6082 Alloys Simulation of Coarse Grain Evolution during Hot Extrusion of Al-Mg-Si Alloy Material Flow Visualization for Metal Extrusion on near Industrial Scale Towards Multi-Scale Modeling of Zirconium Alloys Recrystallization and Application to Thermo-Mechanical Processes Optimization FEM Analysis of the Skin Contamination Behavior in the Extrusion of a AA6082 Profile Assessment of the Optimization Strategy for Nitrogen Cooling Channel Design in Extrusion Dies Comparison of Friction Extrusion Processing From Bulk and Chips of Aluminum-Copper Alloys A Model for Roll-Drawing of Full Sections with Experimental Verification Copper Wire Multi-Pass Drawing: Process Modeling and Optimization Possibility of Deformation of Billet with Various Internal Structure in KOBO Extrusion Extrusion of Lightweight Aluminum and Magnesium Alloys Structures for Aviation Applications Prediction of Underfilling Defect in Aluminium Profile Extrusion Based on ALE Simulation Chapter 4: Forging and Rolling Methodology to Investigate the Transformation Plasticity for Numerical Modelling of Hot Forging Processes Numerical Investigations on Stresses and Temperature Development of Tool Dies during Hot Forging FEM Modelling of Weld Damage in Continuous Cold Rolling of MIG/MAG Butt-Welded Stainless Steel Strips Elaboration of Parameters of Large-Size Rings Production Process Taking into Account the Evolution of Material Relative Density Data-Driven Roll Pass Design of Wire Rod Mills Effects of Tool-Workpiece Friction Condition on Energy Consumption during Piercing Phase of Seamless Tube Production Impact of a Splined Mandrel Geometry on Die Filling in a Cold Forging Process with Adjustable Deformation Zone Performance Analysis of Work-Roll Wear Models on Hot Rolling Chapter 5: Incremental and Sheet Metal Forming Process Window Definition to Predict Mechanical Properties of Press Hardened Parts of Boron Steel with Tailored Properties Influence of Conformal Cooling Channel Parameters on Hot Stamping Tool and Press-Hardening Process Setting Residual Stresses in Tensile Stress-Superposed Incremental Sheet Forming Hot Spinning of Cutting Blades for Food Industry Multistage Deep-Drawing with Alternating Blank Draw-in for Springback Reduction in Transfer and Progressive Dies Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming Evaluation of Cold Roll Forming Strategies for the Production of a High-Strength Aluminum Hat Profile Hybrid Forming - A Method for Simultaneous Forming of High Strength Metal Sheet and Long Fiber Reinforced Plastic Preliminary Study on the Onset of Necking Detection Using DIT in Tensile Tests Increasing the Forming Limits in Hole Flanging of Dual-Phase (DP) 1000 Steel Using Punch Rotation Analysis of the Part Quality and Process Stability when Producing Metallic Micro Parts by Multi-Stage Bulk Forming from Sheet Metal Analysis of Side-Wall Wrinkling in Deep Drawing Processes A Materials Science-Based Approach to Finite Element Simulation of Warm-Forming of Al-Mg-Zn Alloys Numerical Study to Promote the Residual Stresses Development during ISF Process with Improvement in Two Point Incremental Die Forming Influence of Macro-Structured Tools on the Formability of Aluminum Alloys in the Cryogenic Temperature Range Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube Relevance of Symmetry Assumptions in the 3D Numerical Modeling of a Flowformability Test Effects of Temperature on Deep Drawing of an Aluminum Alloy for Different Yield Criteria and Hardening Models Analysis of the Possibility of Forming Stiffening Ribs in Litecor Metal-Plastic Composite Using the Single Point Incremental Forming Method Prediction of Forming Forces for Incremental Micro-Forming Using Finite Element Analysis Design of Single Point Incremental Forming for a Motorcycle Headlight Fairing Manufacture Identification of Influencing Factors in Machine Hammer Peening with Consideration of Lubricant Influences Imprinting of Micro-/Nano-Textures onto Metals and Alloys with Use of the Laser-Printed DLC-Die In Process Measurement Techniques Based on Available Sensors in the Stamping Machines for the Automotive Industry Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes Analysis of Thickness Distributions Calculated from Surface Strains Obtained through Digital Image Correlation for Incremental Sheet Forming Chapter 6: Formability of Metallic Materials Prediction of Forming Limit Diagram Using the Marciniak-Kuczynski Method for Ti-6Al-4V Using Different Material Models Modeling of Deep Rolling as a Distortion Compensation Strategy during Profile Grinding Failure Prediction of Automotive Components Utilizing a Path Independent Forming Limit Criterion Local Formability of Different Advanced High Strength Steels Work-Hardening Behavior of a ZX10 Magnesium Alloy Sheet under Monotonic and Reverse Loadings Drawing Capability of High Formable Packaging Steel: Comparison of Limiting Drawing Ratio and Forming Limit Curve Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN Determination of Forming Limit Curves - Strain Path and Failure Analysis Investigation of the Influence by Size Effects on the Material Characterization of the Uniaxial Compression Stress State Application of the DIC System to Build a Forming Limit Diagram (FLD) of Multilayer Materials On the Anisotropic Mechanical Response of Ti6Al4V Sheet at High Strain Rates Surface Quality and Mechanical Properties in Drawn Stainless Steel Profile Wires Caused by Process Parameters Material Parameters Sensitivity on Springback Modelling of Simple Bending Process DIC Strain Monitoring during Fatigue of Cold-Formed High Strength Steel Influence of the Anisotropic Behavior on Equibiaxial Paths Experimental Investigation of Factors Influencing the Determination of the Onset of Yielding by Temperature Measurement Investigation of the Plane Strain Behaviour of a Laser-Heat Treated Aluminium Alloy A Novel Method for the Determination of High Temperature FLCs of ECAP-Processed Aluminum AA5083 Sheet Metal A Critical Evaluation of Forming Limit Curves Regarding Layout of Bending Processes Bulging of Isotropic Materials Finite Element Analysis of AA 6016-T4 Sheet Metal Forming Operations Using a New Polycrystalline Model Deep-Drawing of Commercially-Pure Niobium Sheet Investigation of the Tube Expansion Test with Elastomer Using Locally Overaged AA6063 Tubes Characterization of Yield Surface Evolution of AZ31 from Shear to Equibiaxial Tension Study on the Effect of Anisotropy on Plastic Flow Localization of Third Generation Advanced High Strength Steel On the Effect of the Tension-Compression Ratio on Forming of Isotropic Materials Fine Blanking Limits of Manganese-Boron-Steel in Fine Blanking Compared to Tempered Steel with Variation of Sheet Metal Temperature Chapter 7: Friction and Wear in Forming Processes Application of Calcium Carbonate as Green Lubricant Additive in Sheet Metal Forming Near-Net Forging of Titanium and Titanium Alloys by the Plasma Carburized SKD11 Dies Method for the Estimation of Wear Resistance Curves in Sheet Metal Forming with Uncoated Tools FEA Approach for Wear and Damage Prediction of Tools for the Progressive Die Stamping of Steel Washers Load-Adapted Surface Modifications to Increase Lifetime of Forging Dies Non-Uniform Effect of the Contact Conditions on the Earing Profile in Cylindrical Cups of Anisotropic Materials Performance Evaluation of Lubricants with Swift Cup Drawing Slider on Sheet Tester Development for Characterizing Galling In Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection Chapter 8: Composites Forming Processes A Hypoelastic Approach for Simulating the Independent Bending Behavior of Textile Composite within the Stress Resultant Shell The Influence of the Sample Size of Bias Extension Tests on the Results of Forming Simulations of Fiber-Reinforced Thermoplastics A Crystallization Kinetic Model for Long Fiber-Based Composite with Thermoplastic Semicrystalline Polymer Matrix Simulation of Wrinkling during Forming of Binder Stabilized UD-NCF Preforms in Wind Turbine Blade Manufacturing Comprehending the Bending: A Comparison of Different Test Setups for Measuring the Out-of-Plane Flexural Rigidity of a UD Fabric Numerical Evaluation of Press Forming Parameters and Mould Geometry in Wood Plastic Composite (WPC) Products On the Effect of Release Agent and Heating Time on Tool-Ply Friction of Thermoplastic Composite in Melt Evaluation of the Patternability of Fibre-Based Materials with Converting Experiments Cold Spray Metallization of Hybrid Thermoplastic - Thermoset Fiber Reinforced Composite Robotic-Assisted Measurement of Fabrics for the Characterization of the Shear Tension Coupling Quantitative Assessment of Reactive and Non-Reactive Binder Systems on First Ply Adhesion for Dry Fiber Placement Processes Mechanical Behaviour of Magnesium Alloy Based - Fiber Metal Laminates after Fabrication Using Different Metal Surface Treatments Effect of the Geometries on the Fabric’s Formability Frictional and Cohesion Behavior of Natural Tows in Order to Assess the Tow Sliding during Composite Forming Flow Behaviour of Carbon Fibre Sheet Moulding Compound Formability Experiments for Unidirectional Thermoplastic Composites Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation Post-Forming Limits of Carbon Fibre Reinforced Thermoplastic Tubular Structures in a Rotary Draw Bending Process Large Scale Forming of Non-Crimp Fabrics for Aerostructures Towards 3D Process Simulation for In Situ Hybridization of Fiber-Metal-Laminates (FML) Investigation of the Membrane Behavior of UD-NCF in Macroscopic Forming Simulations Anomaly Detection during Thermoplastic Composite Infusion: Monitoring Strategy through Thermal Sensors Defects Reduction in the Robotic Layup Process Offline Robot-Path-Planning and Process Simulation for the Structural Analysis of Coreless Wound Fibre-Polymer Composite Structures Chapter 9: Innovative Joining by Forming Technologies In-Mold-Assembly of Hybrid Bending Structures by Compression Molding Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints Realtime Prediction of Self-Pierce Riveting Joints - Prognosis and Visualization Based on Simulation and Machine Learning Investigations on Combined In Situ CT and Acoustic Analysis during Clinching The Effect of the Setting Force on the Fatigue Resistance of a Blind Rivet Nut Set in CFRP Influence of the Surrounding Sheet Geometry on a Clinched Joint Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints Analysis of Machine-Sided Influences during Clinching Influence of the Sheet Edge Condition on the Fracture Behavior of Riv-Bonded Aluminum-Magnesium Joints Preliminary Study of FSW Process of Dissimilar Aluminium Alloys in Battery Pack Assembly for Hybrid Vehicles Production Data-Based and Analytical Models for Strength Prediction of Mechanical Joints Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests Chapter 10: Machining and Cutting Characterization of Abrasion and Erosion Mechanisms during Abrasive Waterjet Machining of Hard Metals Influence of the Workpiece Material and Cooling Condition on the Texture Obtained through Ultrasonic Vibration-Assisted Machining Nitrogen Supersaturation into AISI420 Mold for Precise Machining Drillability of Magnesium-Based Fiber Metal Laminates Obtained via Hot Metal Pressing with Different Metal Surface Treatments Numerical and Experimental Investigations in Orthogonal Milling of 15-5PH Stainless Steel Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V Tribocorrosion Behavior of Ti6Al4V Machined and Burnished Components for Biomedical Application Cutting Force in Drilling with Flat Bottom Drill Fabrication of Anti-Icing Surface Structures on Aluminum Alloy for Aerospace Applications Experimental Analysis of Circular Milling for Material Identification in Aerospace Industry Comparative Study of the Drilling Operation in Duplex Stainless Steels with Drills of Two and Three Cutting Edges Optimization of Machining Process for Improved Sustainability Chapter 11: Non-Conventional Processes Selected Aspects of Surface Integrity of Inconel 625 Alloy after Dry-EDM in Carbon Dioxide On the Suitability of Induction Heating for the Manufacture of Reinforced Aluminum Foam Structures Experimental Investigation of the Effect of EDM Debris Particles Mixed into the Dielectric Fluid on Tool Feed Rate in Drilling-EDM Synthesis of ZnO and CuO Nanowires by Thermal Oxidation on Metallic Substrates Mechanical Behavior of Innovative Reinforced Aluminum Foam Panels Recycling of Powders from Cutting of Medium Density Fiberboard Impact of Die Coatings on Forming Conditions in Electromagnetic Embossing of Thin Sheet Metal Evaluating the Corrosion Resistance of Inconel 625 Coatings, Processed by Compact Plasma Spray, for Applications in Concentrating Solar Power Plants Thermal Barrier Coatings (TBCs) Produced by Air Plasma Spray: Repair by Grinding and Waterjet (WJ) Processes Friction Stir Welding of Thin Sheets of the AA2024-T3 Alloy with a Ceramic Tool: RSM and ANOVA Study Influence of the Laser Welding Direction of Thin DP600 and the Residual Stresses Relaxation Obtained by Simulation and Neutron Diffraction Special Features of the Non-Conventional Cutting (ECM, EDM) of Wool-Like Material Structures Evaluation of the Rheological Behaviour of Magnetorheological Fluids Combining Bulge Tests and Inverse Analysis Bond Strength of Co-Bonded Thermoplastic Leading Edge Protection (LEP): The Effect of Processing-Driven Interphase Morphology CNT/2009Al Aluminum Matrix Composite Sheet Forming for a V-Shaped Skin Part Numerical Analyses of Deformation Mechanisms in a Novel Dimensional Calibration Technique for Thin-Walled, Open Extrusions Investigation of the Forming Behavior of Copper Wires for the Compaction of Windings for Electric Machines Chapter 12: Polymers Processing and Thermomechanical Properties Comparison of Conventional and Conformal Cooling Channels in the Production of a Commercial Injection-Moulded Component Observations of Polymer Foam Development during Rotational Moulding Numerical Simulation of Recycled PET Preforms Infrared Heating Including Force Convection Effect in the Industrial ISBM Ovens Rapid Heat Control for Thermoplastic Injection Tooling Using Lattice Structures as Heat Exchanger Towards a Holistic Approach for an Efficient Determination of the Rheological Behavior of Sheet Molding Compounds for Process Simulation Role of Viscosity on Optimum Polymer-Fibre Interaction during Rotational Moulding Sintering A Two-Temperature Model Based on Fin-Approximation for Transient Longitudinal Heat Transfer in Unidirectional Composite Numerical and Experimental Study of Polymers Microwaves Heating Measurement and Analysis of Deformation Behavior of Polyethylene Tube Subjected to Linear Loading and Unloading Stress Paths with Large Strain Measurement of Biaxial Deformation Behavior and Material Modeling for HI-PVC Using Multiaxial Tube Expansion Test A New Solution for Viscosity Identification in a Polymer Production Line via Convection Analysis Chapter 13: Materials Behaviour Modelling Characterization and Modelling of Sheet Material with Graded Strength for more Accurate Finite Element Analysis Combined Probabilistic Approach and Stress State Dependency on the Failure Modeling of HPDC Aural-2 Alloy Damage Analysis of Hybrid Composites Under Multi-Impact Loads: An Experimental and Numerical Study Numerical and Experimental Investigations on the Mechanical Properties of Milled Specimens from an AA7020 Tube Numerical Investigation of Al-Reinforced CFRP Composite under Low-Velocity Impact Establishment of Thermal Deformation Constitutive Equation of TA15 Titanium Alloy Influence of the Grain Boundary Curvature Model on Cellular Automata Static Recrystallization Simulations Fracture Prediction of Third Generation Advanced High Strength Steels Using Hosford-Coulomb Damage Model On Considering the Influence of Kinematic Hardening in Finite Element Simulation of Hot Levelling of Structural Steel Heavy Plates Periodic Homogenization in Crystal Plasticity: A Comparative Study between 3D and 2D Work Hardening of Metallic Sheets under Tension-Compression and Simple Shear Reverse Loading A Model to Construct and Predict Flow Curve of Materials from Compression Test Results with Machine Learning Models Using Python Intelligent Iterative Experimental Design to Achieve Maximum Model Quality for Phase Change of 22MnB5 Estimation of the Effective Magnetic Properties of Two-Phase Steels FE Crash Modeling of Aluminum-FRP Hybrid Components Manufactured by a Hybrid Forming Process The Virtual Fields Method to Indirectly Train Artificial Neural Networks for Implicit Constitutive Modelling Modelling the Effect of Barrier Layers on the Tensile Properties of Paperboard Materials for Liquid Packaging Influence of Plastic Deformation on the Hydrogen Embrittlement Susceptibility of Dual Phase Steels Fracture Characterization of Advanced High Strength Steel USS CR980XG3 Using Phase-Field Diffusive Approach in Ductile Solids Crystal Plasticity Modeling of Al Alloy under Linear and Non-Linear Loading Viscoplastic Self-Consistent (VPSC) Modeling for Predicting the Deformation Behavior of Commercial EN AW-7075-T651 Aluminum Alloy Investigation on Homogeneous Modeling of Gyroid Lattice Structures: Numerical Study in Static and Dynamic Conditions Chapter 14: Lionel Fourment MS on Optimization and Inverse Analysis in Forming Error Estimation of the 3D Reconstruction of a Displacement Field from DIC Measurements Extension of a Simulation Model of the Freeform Bending Process as Part of a Soft Sensor for a Property Control On the Identification of Material Constitutive Model Parameters Using Machine Learning Algorithms Variance-Based Sensitivity Analysis of the Biaxial Test on a Cruciform Specimen Identification of Anisotropic Yield Functions Using FEMU and an Information-Rich Tensile Specimen Data-Driven Derivation of Sheet Metal Properties Gained from Punching Forces Using an Artificial Neural Network Calibration of the Elasto-Plastic Properties of Friction Stir Welded Blanks in Aluminum Alloy AA6082 Material Parameter Identification of Elastoplastic Constitutive Models Using Machine Learning Approaches A Method for Benchmarking of FEM Packages for Multi-Stage Sheet Metal Forming Simulations Identification of Swift Law Parameters Using FEMU by a Synthetic Image DIC-Based Approach Integrated Thermomechanical Characterization of Metals Using the Virtual Fields Method On the Design of a Heterogeneous Mechanical Test Using a Nonlinear Topology Optimization Approach Parameter Identification of Swift Law Using a FEMU-Based Approach and an Innovative Heterogeneous Mechanical Test Formability Assessment of Variable Geometries Using Machine Learning - Analysis of the Influence of the Database Parameter Identification and Modeling of Hardening to Preserve Identical Predictions under Monotonic Loading In-Process Monitoring of Springback in Industrial Bending Using a Laser Sensor-Based Method Chapter 15: New and Advanced Numerical Strategies for Material Forming Towards a Hybrid Twin Model to Obtain the Formability of a Car Body Part in Real Time Reduced FFT-Based Simulation of a Mechanically Loaded Clustered Microstructure Using an Adaptive Set of Fourier Modes Numerical Investigation of Influence of Spot Geometry in Laser Peen Forming of Thin-Walled Ti-6Al-4V Specimens Modelling of Ceramic Particle Motion during Semi-Solid Forming of Aluminium Matrix Composites via CFD-DEM Four-Way Coupling Real-Time Quality Control in Thin Glass Forming Using Infrared Thermography and Deep Learning Chapter 16: Sustainability on Material Forming Fabrication of Billet from Aluminum Alloys AA 2011-T3/7075 Chips through Friction Stir Consolidation A Simulative Method for Studying the Bonding Condition of Friction Stir Extrusion Analysis, Prediction and Reduction of Emissions in an Industrial Hot Forming Process Chain for the Manufacture of Sheet Metal Components A Preliminary Investigation of Energy Consumption for Turning Ti6Al4V EBM Cylindrical Parts Resistance Heating by Means of Direct Current for Resource-Saving CO2-Neutral Hot Stamping Enabling Sustainability in Glass Optics Manufacturing by Wafer Scale Molding Improvement of Package Properties with Formed Functional Surface Features An Approach for an Innovative 3D Steel Strip Straightening Machine for Curvature and Saber Compensation Innovative Assistance System for Setting up a Mechatronic Straightening Machine


Best Sellers


Product Details
  • ISBN-13: 9783035737509
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 926 Key Engineering Materials
  • ISBN-10: 3035737509
  • Publisher Date: 22 Jul 2022
  • Binding: Digital download and online
  • No of Pages: 2454


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Achievements and Trends in Material Forming: (Volume 926 Key Engineering Materials)
Trans Tech Publications Ltd -
Achievements and Trends in Material Forming: (Volume 926 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Achievements and Trends in Material Forming: (Volume 926 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!