Buy THERMEC 2021 Book by Cecilia Poletti - Bookswagon UAE
close menu
Bookswagon
search
My Account
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > THERMEC 2021: (Volume 1016 Materials Science Forum)
THERMEC 2021: (Volume 1016 Materials Science Forum)

THERMEC 2021: (Volume 1016 Materials Science Forum)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

THERMEC 2021 is the 11th International Conference on advanced materials built upon the proven concept and continues the tradition of its seven predecessors, Japan - 1988, Australia - 1997, USA - 2000, Spain - 2003, Canada - 2006, Germany - 2009, Canada - 2011, Las Vegas/USA - 2013, Graz/Austria - 2016, Paris/France - 2018 and Vienna/Austria - 2020. This conference series provides a forum for researchers around the globe to present results on recent advances in the field of materials science and technology of processing and manufacturing of advanced materials. The conference covers aspects of processing, fabrication, structure/property relationships, and applications of both ferrous and non-ferrous materials including biomaterials, materials for aerospace, and other advanced materials.

Table of Contents:
Preface Plenary Recent Developments in the Processing of Advanced Materials Using Severe Plastic Deformation Keynotes Achieving Superplasticity in Fine-Grained Al-Mg-Sc Alloys Improvement in Mechanical Performance of Biomaterial Ti Alloy by Controlling Volume Fraction of Martensite Phase Additive Manufacturing of Ti6Al4V with Wire Laser Metal Deposition Process Model Description of the Unusual Temperature Dependence of the Viscosity of Metallic Glass-Forming Liquids Mechanical Stress Issues of La0.6Sr0.4Co0.2Fe0.8O3-δ Effects of Al, Si and N Content on the Formation of M-A Constituent and HAZ Toughness of Ti-Containing Low-Carbon Steel Grain Orientation Spread in Dynamically Recrystallized Austenitic Steel Effect of the Morphology, Size, Distribution and Homogeneity of Carbides and Matrix on Wear Resistance in High Cr-Alloys White Cast Iron Friction Stir Welded AISI 304 Metal Sheets for Application in Food Implants The Use of Transient Liquid Phases in Powder Metallurgy Austenitic Grain Size Effect on the Phase Transformation of a 7.0% Cr Steel for Forging Evolution of Carbides during Prestrain and Tempering Detonation Spraying of Metal Carbides Composites How to Master Interfaces in MMCs with Reactive Constituents Synchrotron 3D μ-Tomography of Porosity during Hot Isostatic Pressing of a Single-Crystal Nickel-Base Superalloy Evaluation of Cu-Ni-Based Alloys for Thermoelectric Energy Conversion Mechanical and Thermal Properties of Harmonic Structured Composites by MM/SPS Process Time-, Temperature- and Frequency-Dependent Viscoelastic Properties of a Curing Epoxy Adhesive Fatigue Behavior of Age-Hardening Cu-6Ni-1.5Si Alloys with Different Grain Sizes Processing Strategies for Hot-Rolled Medium-Mn Steels Development and Characterization of New Ti-25Ta-Zr Alloys for Biomedical Applications Effect of Microshot Peening on Fatigue Strength of Austenite Stainless Steel Mechanical Properties of Interface Layers in SiC/TiAl Composite Inferences of Baking Time on Hydrogen Embrittlement for High Strength Steel Treated with Various Zinc Based Electroplating Influence of Substitution of Fe by Mo on Heat Treatment Behavior in Ti-Mo-Fe Alloys Layer-Thickness Dependence of Hardness and Local Bucking Behavior in Electrodeposited Ni-Co-Cu/Cu Multilayered Films Hardness Development of Mechanically-Bonded Hybrid Nanostructured Alloys through High-Pressure Torsion Energy Absorption of Additively Manufactured Porous Metals with Disordered Cells Experimental Characterization and Modelling of the PLC Effect in an AlMg-Alloy Influence of Strain-Hardening and Dynamic Recovery on DDRX Steady State Ultrasonic Processing of Magnesium Alloy for Property Enhancement Computer Prediction of Phase Fraction in Multipass Weld of Duplex Stainless Steel - Proposal of Microstructural Improvement Welding Process - Effect of Particle Morphology on Thermal Properties of TiB2 Particle Dispersed Pure Aluminum Composites Development of New Particle Method Based on MPS and its Applicability for Friction Stir Welding of Dissimilar Joint Contributions Corrosion Resistance of Additive Manufactured Titanium Alloy Parts: The Effect of Recycled Powders PL Properties of (Ba, Ca)2( Si, P)O4: Eu Synthesized by Various Annealing and Cooling Process Microstructural Prediction of Heat Treated Steel Forgings for Severe Applications Influence of Elastic Modulus of Matrix on Conductivity of VGCF Dispersed in Plastic Matrix Study of the Impact of the Synergic Line and the Strategy of Conception on Ti-6Al-4V Wire Arc Additive Manufacturing Process (WAAM-CMT) Thermomechanical Processing without Accelerated Cooling to Achieve an As-Rolled Yield Strength of 400MPa in C-Mn Steel Plate 15/15 Ti Stainless Steel Welding Process Optimization for GEN IV Nuclear Application in the GEMMA Project Frame High Cycle Fatigue Behaviour of Cu/Sn Intermetallic Compounds Prepared by Transient Liquid Phase Bonding Process Thermal and Magnetic Properties of Ternary Fe-B-C and Quaternary Fe-B-C-Si Alloys with High Glass-Forming Ability and High Magnetization Adaption of 3D Printing for Rapid Tooling High Purity Magnetite Microparticles Directly Derived from Mill Scale via Hydrogen-Reduction Method Fracture Behavior of an AlMgMnSc Alloy at Different Temperatures Multi-Scale Characterization by Neutronography and Electron Diffraction of Ni Coating on Cu-Ni-Al or Cast-Iron Glass Molds after Laser Cladding Design Solutions from Material Selection for Rib Fixators Effect of Distance along the Built Axis on Mechanical Properties and Microstructure in Al10SiMg SLM Alloy Martensitic Transformation and Damping Behavior of Fe-Mn-Nb Damping Alloys Hot and Cold Deformation Behaviors and Microstructure Evolutions of Mn18Cr18N Austenitic Stainless Steel with High-Nitrogen Microstructure Evolution in an Advanced High Strength Steel under Continuous Cooling Thermal Stability of Ultrafine-Grained Pure Titanium Processed by High-Pressure Torsion Study on the Effect of V Microalloying on Earthquake Resisting High-Strength Reinforcing Bar Steels Change of Microstructure and Analysis of Fracture of the Ti-50.8 at.% Ni Alloy in the Ultrafine-Grained State after Multiple Martensitic Transformations with a Large Number of Cycles Effect of Different Production Processes on Metallic Composite Phase Change Materials for Thermal Energy Storage Extended Model for Prediction of Transition from Internal to External Oxidation in Steels: Comparison between Analytical/Semi-Analytical and Numerical Approaches Challenges in Printing Certified Additive Manufactured Material: Ensuring Process Stability and Material Quality Influence of Mn and Ni on Austenite Stabilization during a High Temperature Q&P Treatment Changes in Mechanical and Microstructural Properties of Magnesium Alloys Resulting from Superimposed High Current Density Pulses Revisiting the Ostwald Ripening: A Discrete Model Based on Multiple Pairwise Interactions Mechanical Properties of Selective Laser-Melted Components of Alsi10mg for Prototype Vehicles The Isothermal Oxidation of MCrAlY Protective Coatings Delamination of Pearlitic Steel Wires: Role of Strain Partition on Mechanical Properties of Pearlitic Wires Evolution of the Microstructure and Mechanical Properties of the Ultrafine-Grained VT8M-1 during Isothermal Die Forging and Thermal Treatment Statistical Errors in X-Ray Triaxial Stress Analysis by Cos α Method Thermal Stability of Retained Austenite in Advanced TRIP Steel with Bainitic Ferrite Matrix for Automotive Industries 3d Printer Heads for Extrusion of Biologicals Gels Influence of Surface Roughness on the Corrosion Behaviors of DP590 Steel Hot Stamped Aluminium for Crash-Resistant Automobile Safety Cage Applications Performance of Vibration Power Generators Using Single Crystal and Polycrystal Magnetic Cores of Fe–Ga Alloys Biocompatibility of Anodized Low-Cost Ti-4.7Mo-4.5Fe Alloy Effect of Thermomechanical Treatments on the Mechanical Properties of New Low-Cost Ti-Fe-Nb-Zr Alloys Tailored Liquid Phases for Enhanced Sintering of Advanced PM - Steels Aging Response in Selective Laser Melted AlSi10Mg Alloy as Function of Distance from the Substrate Plate Fracture Toughness and Fatigue Crack Growth Characteristics of UFG Microalloyed and IF Steels Processed by Critical Phase Control Multiaxial Forging Thermal Barrier Coatings for Molybdenum Produced Using Nanopowders Increasing Hardenability and Hardness of Quenching and Tempering Alloys by Substituting Chromium with Manganese Multi-Class Grain Size Model for Forged Alloy 718 Aircraft Parts Non-Vacuum Fabrication of Bandgap-Controlled CZTGS Alloy Films Using CZTS+CZGS Mixed Nanoparticle Inks Tensile Deformation Behavior of Magnesium Single Crystals with Different Yttrium Concentrations Brazing of Stainless Steel Using Electrolytic Ni-P Plating Film and Investigation of Corrosion Behavior Shear Banding in Rotated Goss Grains and its Effect on the Formation of Cube Texture in Non-Oriented Electrical Steel Micromechanical Simulation Approach of Dual Phase Steel Artificial Microstructure Using Random Field Model Orthotropic Behaviour of Magnesium AZ31 Sheet during Strain Localization Microstructure and Tensile Properties of Sn-Ag-Cu-In-Sb Solder Iron Carbon Masteralloy as Sintering Activator for Low Alloy Powder Metallurgy Steels Quantitative Detection of Hydrogen Gas Release during Slow Strain Rate Testing in Aluminum Alloys Effect of Compressive Residual Stress on Film Formed by Mechanochemical Multifunction Cavitation Processing Grain Refinement of Fe-X Alloys Fabricated by Laser Powder Bed Fusion The Influence of Introduced Strains on the Exfoliation Corrosion Behavior of Mg-14mass%Li-1mass%Al Alloy Corrosion Resistance of Mg Alloy with High Zn Concentration Including Impurity Cu Optimization of Slab Edge in Roughing of Stainless Steel Orientation Analysis Parametric Study of Pulse Arc Welding (PAW) and Laser Beam Welding (LBW) Techniques for Electrical Vehicle Battery Cells Post-Fire Performance of Square Concrete-Filled Steel Tube Columns under Uni-Axial Load Promising Bendability of a New As-Rolled Medium-Carbon, Low-Alloy Steel with Isothermal Upper and Lower Bainitic Microstructure Study on Forging Permeability of 06Cr19Ni9NbN Steel during Hot Deformation Influence of Chromium and Niobium on the Press-Hardening Process of Multiphase Low-Alloy TRIP Steels Optimising Computational Fluid Dynamic Conditions for Simulating Copper Vertical Casting Improvement on Impact Toughness of Cold Formed S420 Steel by Direct Quenching Effect of Cooling Rate below Ms Temperature on Hydrogen Embrittlement of TRIP-Aided Martensitic Steels Investigation of Temperature Evolution and Flash Formation at AA5083 Studs during Friction Surfacing Microstructure and Precipitation Studies of Gas Tungsten Arc Welded Haynes 282 Superalloy Carrier Concentration of CeFe2Al10 as a Candidate of Thermoelectric Material Effect of Alloying Element on Mechanical Properties of High Strength Austenitic Steel Magnetic and Mechanical Properties of Fe-Cr-Si-Mo Alloys by MIM Process Structural Changes in Multi Principal Element Alloys in Dependence on the Aluminium Content Shape Memory Properties of Ti-Ni Shape Memory Alloy / Shape Memory Polymer Composites Using Additive Manufacturing Temperature Increase during Isothermal Forging of Ti-5Al-2Sn-2Zr-4Cr-4Mo Alloy Using a 1500-Ton Forging Press Synthesis PbFCl-Type Mixed Anion APX(A=Hf, X=S, Se) Superconductors Related with Topological Materials by High-Pressure Technique Analysis of the Strain Distribution and Texture Measurements in Asymmetric Rolling (AR) and Asymmetric Accumulative Roll Bonding (AARB) Effect of Heat Treatment on Structure and Properties of Martensite Stainless Steel for Ice-Class Ships Obtained by Direct Laser Deposition Method Microstructure and Tensile Properties of TRIP-Aided Steel Sheet Subjected to Hot-Rolling and Austempering Fabrication of Three-Dimensional Microstructure Film by Ni-Cu Alloy Electrodeposition for Joining Dissimilar Materials Reaction Sintering of Tial Intermetallic Compound Comprehensive Phase Field Study on Directionally-Solidified MoSi2/Mo5Si3 Eutectic Alloy Electron Beam Melting: From Shape Freedom to Material Properties Control at Macro- and Microscale Temperature-Dependent Mechanical Stability of Retained Austenite in Thermomechanically Processed 3Mn Steel Microstructure and Mechanical Properties of the UFG Magnesium Alloy Mg-1%Ca Effect of Microstructure on Joint Strength of Fe/Al Resistance Spot Welding for Multi-Material Components Severe Plastic Deformation of Copper, Binary Cu-Zn Solid-Solution Alloys, and High-Strength Brass by High-Pressure Torsion Structural Characterization of a Biogenic Secretion Extracted from the Tendon or Ligament in Rabbits for Artificial Ligament Formation Enhancing High-Temperature Creep Resistance of In Situ TiAl-Based Matrix Composite by Low Volume Fraction of Ti2AlC Particles Impact of Microstructural Anisotropy of As-Cold-Sprayed Cu Deposits on its Annealing Effect Performance of 14Cr ODS-FeCrAl Cladding Tube for Accident Tolerant Fuel Analysis of the Applicability of Effective Thermophysical Properties to Composite Phase Change Materials Long Term Stability Evaluation of Stress Improvement Effect on Ni-Based Alloy Welds by Various Residual Stress Improvement Methods Inhomogeneous Microstructure and its Thermal Stability of AlSi10Mg Lattice Structure Manufactured via Laser Powder Bed Fusion Study of Nb Solubility in Hot Charging Process Cold Spraying of IN 718-Ni Composite Coatings: Microstructure Characterization and Tribological Performance Defect Reduction and Quality Optimization through the Modelling of Plastic Deformation and Metallurgical Evolution Grain Boundary Engineering of Strain-Annealed Hastelloy-X Modelling of Cyclic Delamination Behavior of Thin Multilayered Structures Using Gradient Elasticity and Damage Accumulation Effects of Activated Carbon Counter Electrode on Bifacial Dye Sensitized Solar Cells (DSSCs) Dynamic Recrystallization Mechanisms of Nickel Niobium Alloys during Hot Working Effect of Stress Gradient on Heat Cycle Fatigue Life Prediction of Solder Joints by Repetitive Bending Test Effect of Strain Rate on the Microstructure and β-Texture Evolutions in β-Processed Forging of a Near-β Titanium Alloy Additive Manufacturing of Multi Layered Bioactive Materials with Improved Mechanical Properties: Modelling Aspects Nickel Supported Modified Zirconia Catalysts for CO2 Methanation in DBD Plasma Catalytic Hybrid Process Physical Modelling of Strain Induced Roughness of Copper Wire during Dieless Drawing Process Effect of Hot Processing on Mircrostructure and Properties of Flat Billets of TA15 Titanium Alloy In Situ Observation during Copper Alloy Brazing Using an X-Ray System Activities of Non-Basal Slips in Rolled Mg-Li and Mg-Ce Alloys Sheets Creep Resistance of Ultrafine-Grained VT8M-1 Alloy The Domain of Portevin-Le Chatelier Effect in Al-3Mg Alloy The Effect of Hydrofluoric Acid Concentration in Sulfuric Acid-Based Desmutting Solution for Aluminium Alloys Influence of Hot Pressing Sintering Temperature on the Properties of Low-Density Al0.5NbTa0.8Ti1.5V0.2Zr Refractory High-Entropy Alloy Strain Rate Dependent Mechanical Stability of Retained Austenite in Hot-Rolled Medium-Mn Sheet Steels Extra-Hardening of SPD-Processed Al-Mg Alloy with Minimum Grain Sizes Improving Mechanical Properties of Twin-Roll Cast AZ31 by Wire Rolling Mechanical Behaviour of Beta Titanium Alloys Preliminary Development of Cold Spray Procedures for Nickel Aluminum Bronze Casting Repair High-Temperature Tribological Properties of ReB2-Based Ceramic/Si3N4 Sliding Pairs Effects of Retained Austenite Conditions on the Ductility of the Advanced High Strength Steels Solid State Amorphization and Alloy Parameters for High Entropy Alloys Corrosion Resistance Evaluation of a Stainless-Steel Brazed Joint in HCl Solution Stress Ratio Effect on Fatigue Crack Initiation Mechanism of Magnesium Alloy AZ31 Applications of Smart Material of Li2O-(Nb/Ta)2O5-TiO2 Solid Solution Having a Unique Periodical Structure Crystal Orientation Relationships among Acicular Ferrite, Oxide and the Austenite Matrix in a Steel Weld Metal FTMP-Based Kink Deformation and Strengthening Mechanisms for Mille-Feuille Structures Influence of Radial Shear Rolling Regimes on the Homogeneity of Structural-Phase State, Mechanical Properties and Fatigue of near β Titanium Alloy Progress towards a Complete Model of Metal Additive Manufacturing Investigation of Three-Dimensional Geometry of Butterfly Martensite and Analysis of Relationship between Hardness of Lath/Butterfly Two-Phase Martensite and its Grain Thickness in Medium-Carbon Steel Effect of Cold Reduction Rate on Ferrite Recrystallization Behavior during Annealing in Low-Carbon Steel with Different Initial Microstructures Steel Production Technology Development for the Manufacture of Pipes Used in the Extraction and Transportation of Petroleum Products Mechanical Joining Utilizing Friction Stir Forming Threshold Voltage Control for MONOS Nonvolatile Memory with High-k HfN/HfO2 Stacked Layers for Analog Memory Application Effect of Aging Heat Treatment at 400-600°C on the Microstructure and Tensile Properties of 15Cr-15Ni Ti-Stabilized Steel Cladding In Situ Neutron Diffraction Measurement during Bainite Transformation and Accompanying Carbon Enrichment in Austenite at iMATERIA, J-PARC MLF Metallurgy of Highly Wear-Resistant Indefinite-Chill Work Roll Materials for Hot Rolling Mills Anisotropy of Plastic Deformation in Hexagonal Metals The Multiphase Micro- and Nanostructures of 0.2 and 0.4 C Direct-Quenched and Partitioned Steels When 3D Printing Meets Tribological Demands - Surface Functionalization Technologies as Added Value of Existing and New Emerging Products A Novel Method for Evaluation of Chromium Evaporation from Solid Oxide Fuel Cells Interconnects: A Feasibility Study Microstructure Development in the Bonding Zone of Explosively Welded Ti and Cu Sheets Effect of Nano Sodium Titanate Whisker and Aramid Pulp on the Friction and Wear Behavior of Resin-Based Brake Material Effect of Nb on the Austenite Microstructural Homogeneity of Hot Rolled Rebars The Influence of the Sintering Temperature on the Properties of the 0.98Pb(Zr1-xTix)O3 - 0.02La(Fe3+0.5, Nb5+0.5)O3 Ceramic Systems The Occurrence of a Peripheral Coarse Grain Zone (PCGZ) in Extruded Bars of AA 7108 Microstructure after Solution Annealing of the Nuclear Grade Austenitic Stainless Steel DIN 1.4970 Application of Image Analysis Method Combined with Microhardness Measurement to Determine Phase Fractions Stability of Ordered B2-βO and Disordered BCC-β Phases in Tial - A First Principles Study The Influence of Process Parameters on Structure of YSZ Coating Deposited by Plasma Spraying on AISI 316L Stainless Steel Surface by APS Method and on Ti6Al4V Titanium Alloy Surface by PS-PVD Method Microstructure of Al-2.5Fe Binary Alloy Fabricated by Laser Powder Bed Fusion Effect of Extrusion Temperature and Thermal Treatment on Microstructure and Mechanical Properties of Ti-1300 Alloy Tube Microstructure and Mechanical Properties of a Lamellar-Structured Low-Alloy TRIP Steel Near-Threshold Fatigue Crack Growth Behavior of ECAPed Ultrafine-Grained Copper Microstructure Evolution during Strain-Induced Transformation of Austenite in an Austempered Ductile Iron (ADI) Influence of Heat and Surface Treatments on the Fatigue Response of DMLS Manufactured AlSi10mg Microstructure Evolution during Multiaxial Processing of TA6V Mechanism of Void Formation during Brazing of Ni Paste Brazing Filler Metal Internal Dislocation Density in Deformed GlidCop from X-Ray Line Profile Analysis Effect of Stacking Fault Energy and Solute Atoms on Microstructural Evolutions of FCC Metals Processed by Severe Plastic Deformation Friction and Wear Response of a Hard-Anodized AA6082 Standardization of Cosα Method for X-Ray Stress Measurement Effects of Alloying Elements on the Stability of ω-Fe Phase in Steel: A Density Functional Theory Study Effects of Peening Direction on Reverse Transformation Induced by Shot-Peening for Fe-33%Ni Alloy Non-Parametric Comparison of Crystallographic Orientation Distributions Metal-Free and Carbon-Free Flexible Self-Supporting Thin Film Electrodes Fabrication of Silver-Nanowire/PVDF Self-Supporting Thin Flexible Electrode Membranes Miniaturized Blood Sampling System with Integrated Sample Preparation From Biomaterial to Organoid - Bioprinting for Practice Residual Stress in Automotive Powertrains: Methods and Analyses Magnetization and XRD Studies of Laser Heat Treated SmCo5 Powders High Energy Surface Implantation by Ion Nitrogen of Ultra- Fine Grained Ti-6Al-4V Alloy for Engineering Application Industrial Fe-Simulation of Roughing Using an Automatic Solver Shifting Technique Spinning Formability of Al-Mg-Si Alloy Deformation Behavior of Single Particle Cold Spray Ti-6Al-4V Splats Effects of Microstructure on the Hydrogen Embrittlement Resistance of Ultra High Strength Martensitic Steel Sheets Optimization of Preform for Stub Axle Forging Using Simulation Software Hydrogen Embrittlement and Hydrogen Trapping Behaviour in Advanced High Strength Steels Properties of Alumina Coatings Deposited by Detonation Spraying Experimental Study and Modelling of the Ferritic Steel Anisotropic Behavior under Associated and Non-Associated Flow Rule Effect of Silicon Content on the Decomposition of Austenite in 0.4C Steel during Quenching and Partitioning Treatment Microstructure and Shape Memory Behavior of Ti-18Nb-6Zr (at.%) Alloy Titanium Alloy Milling Using Abrasive Water Jet for Repair Application: Modifications in Surface Quality and Material Integrity Following Plain Water Jet Cleaning High-Temperature Oxidation of AISI441 Ferritic Stainless Steel for Solid Oxide Fuel Cells Effect of Interstitial Elements on the Cryogenic Mechanical Behavior of FCC High Entropy Alloys Microstructure Refinement Effect on EUROFER 97 Steel for Nuclear Fusion Application The Effect of Long-Term Heating on Thermal Stability of Ultra-Fine Grained Titanium Alloy VT8M-1 Processed by Rotary Swaging Structure and Microstructure of Advanced Materials Characterized by Neutron Diffraction Evaluation of Interfacial Thermal Resistance of Al-AlN Composites by Using Image-Based Calculation The Effect of Ni Precursor Salts on Diatomite Supported Ni-Mg Catalysts in Methanation of CO2 Performance of a Matrix Type High Speed Steel after Deep Cryogenic and Low Tempering Temperature Development of High-Accuracy Simulation Test Technology for Hot Stamping Effect of Temperature and Humidity on Degradation Behavior of Cu/Epoxy Interface under High Temperature and High Humidity Aging Tensile Deformation of Si Single Crystals at High Temperatures In Situ Evaluation of the Joining Defects in a Pb-Free Soldered Joint Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels Microstructure Modification of 3D Printed Aluminium Alloys by Friction Stir Processing Investigation of Bonding Strength of Al Solid Phase Diffusion Bonded Joint with Surface Treatment Using Electrolyzed Water Powders for Additive Manufacturing: From Design to Certification Mechanical Property and Heat Treatment Behaviour of Ti-Zr-Fe Alloys Study of High Temperature Properties of AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion Optimization of Molecular Characteristics via Machine Learning Based on Continuous Representation of Molecules Utilisation of Titanium and Titanium Dioxide as Scaffolds for Proliferating Coral Reef Improvement of Strength and Ductility by Combining Static Recrystallization and Unique Heat Treatment in Co-20Cr-15W-10Ni Alloy for Stent Application Effects of Carbon Content Change on Growth of Compound Layer in Surface of Nitrided Steel Bending and Welding of New High Oxidation Material - Thor™ 115 Surface Morphology of Refractory Metals Submitted to a Single Laser Pulse Integral Computer Model for Simulating Microstructure Evolution during Thermomechanical Processing and Heat Treatment of Steels and Predicting their Final Mechanical Properties Studies on Thermomechanical Cycling Characteristics of an Ni-Ti-Cu Shape Memory Alloy Finite Element Analysis of Surface Modification of Titanium Alloy Used for Hip Implant Forming an Optically Transparent Graphene Film via the Transformation of C60 Molecules Effect of the Pre-Strain on the Elastic Behavior of a Dual-Phase Steel with Different Martensite Contents Adhesion Properties of Thin Film Multilayers: Comparison of Nanoindentation and Four-Point-Bending Techniques Effect of Strain Rate on Compressive Behavior of a ZrCuNiAl Bulk Metallic Glass at Room Temperature Effect of Cellular Dislocation Structure on the Strength of Additively Manufactured 316L Stainless Steel Syngas Production by Dry Methane Reforming over Mg Doped NiO-ZrO2 Catalysts Deformation Property of Dense Oxide Coated Magnesium Alloy Surface Remelting of Thermal Spraying Coatings - Technologies, Properties and Applications Processing of Nanostructured Bulk Fe-Cr Alloys by Severe Plastic Deformation Study of the Microstructure and Mechanical Properties Obtained by Laser Boost in SLM Process for the Ti-64 Alloy The Influence of HPT on Microstructure and Wear Resistance of Al-7wt%Si-2wt%Fe Alloy Mechanical Behaviour of Rubber Material with Consideration to Mullins Effect Investigation on Surface Roughness in Electron Beam Selective Melting by Mesoscale Model Static Recrystallization in Aluminum/Graphene Composites Correlation of Segregation Energies of Ni and Fe with Mendeleev Number Operando Monitoring of Charging Processes in Battery Cathodes by Magnetometry and Positron Annihilation Goss Texture Evolution in a Grain-Oriented Fe-6.5wt%Si Steel Processed by Strip-Casting Investigation of the Role of Intermetallic Phases in Microstructure of UFG Titanium VT8M-1 Alloy The Effect of Aging Conditions on the Stress Relaxation Behavior of 17-7PH Stainless Steel First-Principles Study of Epoxy Resin Adhesion to Tin Oxide Surface Formation of Cemented Tungsten Carbide Layer with Compositional Gradient Processed by Directed Energy Deposition The Impact of Interface Characteristics on Mechanical Performance of a Hot-Forged Cu/Ti-Coated-Diamond Composite Effect of Chemical Composition on Grain Refinement of AlxCoCrFeNi High Entropy Alloys with NiAl Grain Boundary Precipitates Improvement of Mechanical Properties of Laminated Composites by Using Cryogenic Roll Bonding Development of Cu Coating on Ceramic Substrates by Low Pressure Cold Spray and its Deposition Mechanism Analysis Thermal Degradation Behavior of Hydrogen Permeability of Pd-Coated V-Alloy Membrane for Hydrogen Separation and Purification Analysis of Different Thermal Conductivity Measurements for Al-Si Casting Alloys Dislocations of Ti-600 Alloy Crept at 600°C with Two Stresses Microstructure and Mechanical Properties of Cu-Fe Alloys via Powder Metallurgy Numerical Simulation of Microstructure Evolution during Continuous Hot Rolling Process of GCr15 Steel Rod Effect of Tempering Time on Microstructure and Mechanical Properties of SA738 Gr.B Steel The Microstructure and Properties of Low Carbon PM 625 Alloy for Marine-Based Application Efficiency of Microstructure Refinement in Ti-Based Alloys Metallic Composites, Prepared by Deformation Processing The Effect of Deformation Strain on Texture Uniformity in Tantalum Sheet during Asymmetric Cross Rolling Effects of Powder Microscopic Defects on Densification and Mechanical Properties of WC via Spark Plasma Sintering Three-Dimensional Characterization of Morphology and Crystallography of a Gold Nanoisland Film Unmixed Joint of A1050 and C1020 by Friction Stir Butt Welding Spark Plasma Sintering of Paper-Derived Ti3AlC2-Based Composites: Influence of Sintering Temperature Fabrication of Be-Ta Ti Alloys without Pre-Alloyed Powders via SLM Martensitic Transformation of High-Entropy and Medium-Entropy Shape Memory Alloys Suppression of Intergranular Fracture in 7000 Series Aluminum Alloys Elasto-Plastic Deformation of Heterogeneous Metallic Materials: An Experimental Approach with AlMg4Si10 Effects of Tensile Testing Temperature on Mechanical Properties and Deformation Behavior in Medium Mn Steels Characteristics of Cube Orientation for Pure Iron Tape Fabricated by Cold Rolling and Annealing The Application of Neutron Diffraction Techniques (NDT) in Measuring Residual Strain-Stresses of Engineering Materials Evaluation of Color Tone and Exfoliation Resistance of Porcelain-Firing Ti with White Oxide Coating as an Opaque Layer Effects of Nb Content and Heat Treatment on Fretting Wear Behavior of Ti-Nb Alloys Modelling Dilatometry Data of Isothermal ω-Phase Formation in a Strongly β-Stabilised TiV-Alloy Hardness Prediction of AA 2024-T3 FSW Weld Density Functional Theory Study of the Adsorption of Metal Adatoms on Graphene Investigation of CGHAZ Simulations of Low-Carbon Bainitic Steels Grey-Fuzzy Logic Based Approach in Multi-Response Optimization of Semi-Solid Forging of A356 Aluminium Alloy Microstructure Factor of Creep Behavior in Near-α Ti Alloy


Best Sellers


Product Details
  • ISBN-13: 9783035736304
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 1016 Materials Science Forum
  • ISBN-10: 3035736308
  • Publisher Date: 05 Jan 2021
  • Binding: Digital download and online
  • No of Pages: 1944


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
THERMEC 2021: (Volume 1016 Materials Science Forum)
Trans Tech Publications Ltd -
THERMEC 2021: (Volume 1016 Materials Science Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

THERMEC 2021: (Volume 1016 Materials Science Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    Your IP: 216.73.216.237 IN