Buy Solid State Science and Technology VII by Fadhlina Che Ros
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Solid State Science and Technology VII: (Volume 317 Solid State Phenomena)
Solid State Science and Technology VII: (Volume 317 Solid State Phenomena)

Solid State Science and Technology VII: (Volume 317 Solid State Phenomena)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This volume compiled from materials presented at the 7th International Conference on Solid State Science and Technology 2019 (7th ICSSST 2019, November 11-13, 2019 in Putrajaya, Malaysia) and reflects recent results in the area of materials science and processing technologies. The conference was jointly organized by the Centre for Defence Foundation Studies, National Defence University of Malaysia (NDUM) as host, in cooperation with the Malaysian Solid State Science and Technology Society (MASS). "Enhancing Science and Technology of Advanced Materials for the Fourth Industrial Revolution" was the theme of the conference, and the aim was to provide a platform for the science and technology community to discuss the latest developments and findings.

Table of Contents:
Preface Chapter 1: Ferrites and Manganites Effect of Fe3+ Partial Substitution at Mn-Site on Electroresistance Behaviour in La0.7Ba0.3Mn1-xFexO3 (x = 0 and 0.02) Manganites Effect of Fe Doping on the Structural, Electrical and Magnetic Properties of Perovskite La0.7Ca0.3Mn1-xFexO 3 (X = 0, 0.01, 0.03 and 0.05) Electroresistance Effect due to Mo Substitution at Mn-Site in Monovalent Doped La0.85Ag0.15Mn1-xMoxO3 (x = 0.00 and 0.05) Manganites Microwave Absorption Properties of Monovalent Doped La0.85Ag0.15MnO3 Manganites Prepared by Solid State Method Band Structure and Thermoelectric Properties of Ni(x)Zn(1-x)Fe2O4 Structural and Dielectric Analysis of La0.88Bi0.12Mn0.80Ni0.20O3 Composite Synthesis and Characterization Barium M-Hexaferrites (BaFe12-2xCoxMnxNixO19) as a Microwave Absorbent Material Structural and Optical Properties of BiFeO3 via Polymer-Assisted Hydrothermal Synthesis under Different Weight of Chitosan Effect of TiO2 Nanoparticle on the Structural and Electrical Properties of Nd0.67Sr0.33MnO3 /TiO2 Composites Structural and Electrical Properties of La0.7Ca0.3MnO3 /α-Fe2O3 Composites Chapter 2: Glass and Ceramics Linear Shrinkage, Strength and Porosity of Alumina-Based Ceramic Foam with Corn Starch as Pore Former Comparative Spectroscopic Studies on Luminescence Performance of Er3+ Doped Tellurite Glass Embedded with Different Nanoparticles (Ag Co and Fe) at 0.55 μm Emission Optimum Lasing Cavity for Erbium Doped Zinc Tellurite Glass Rods Embedded with Ag Nanoparticles The Optical Performance of Holmium Oxide Doped Tellurite Glass for Potential Optical Fiber Effect of Samarium Ions on Physical and Optical Properties of Zinc Borotellurite Glass System Fabrication of Silica (SiO2) Foam from Rice Husk Ash (RHA): Effects of Solid Loadings Chapter 3: Functional Nanomaterials and Nanotechnologies Assessment of Magnetic Properties between Fe and Ni Doped ZnO Nanoparticles Synthesized by Microwave Assisted Synthesis Method Enhanced Transport Critical Current Density of Tl-1212 Bulk Superconductor Added with Nickel-Zinc Ferrite Nanoparticles Synthesis and Characterization of Low Density Bi-2223 Cuprates Superconductor Doped Eu2O3 Nanoparticles Spheroid Nickel Nanoparticles Synthesized in CTAB Solution Using Gamma Radiation Microcrystalline Cellulose as Graphite Exfoliation Agent and its Effect on Electrical Conductivity Synthesis and Characterization of Copper Selenide and Tin Selenide Powders by Mechanical Alloying Method Synthesis of Silver Nanoparticles by Plasma-Assisted Hot-Filament Evaporation for Enhancing in Luminescence Properties of Organic Light Emitting Diode The Study of Platinum Coated Carbon Nanotubes as Third-Order Nonlinear Optical Materials Influence of Zr Additive on the Chemical Reduction Behaviour of MoO3 in Carbon Monoxide Atmosphere Nanocellulose-Based Filters as Novel Barrier Systems for Chemical Warfare Agents Chapter 4: Materials for Sensing Technologies Morphology Studies of SWCNT Dispersed in Conducting Polymer as Potential Sensing Materials Multi-Walled Carbon Nanotubes Functionalized with Carboxyl and Amide for Acetone detection at Room Temperature Supramolecular Interactions in Aromatic Structures for Non-Optical and Optical Chemosensors of Explosive Chemicals Facile Synthesis and Characterizations of Silver Nanoparticles-Reduced Graphene Oxide Hybrid Chapter 5: Biomaterials Synthesis, Characterization and Bioactivity of Chitosan Hydroxyapatite Composite Doped with Strontium In Vivo Toxicity Assessment of Nickel Zinc Carbon Nanotubes in a Living Host Model Synthesis of Calcium/Aluminium-Ciprofloxacin-Layered Double Hydroxide for a New Antibacterial Drug Formulation Chapter 6: Materials and Technologies for Environmental Engineering Feasibility of Irradiated Corn-Based Bioplastics as Packaging Material Synthesis of Carbide Lime Derived Strong Base Catalyst for Biodiesel Production Photocatalytic Degradation of Methylene Blue by TiO2- Graphene Composite Cellulose Nanofiber as Potential Absorbent Material for Chloride Ion Rapid Adsorption of Magnetite Nanoparticles from Recycled Mill Scale Waste as Potential Adsorbent for Removal of Cu(II) Ions Comparative Study on Micronsized and Nanosized Carica papaya Seed Modified Pullulan as Biocoagulant in Wastewater Treatment Study on the Effect of Applied Pressure on Iron and Manganese Rejection by Polyamide and Polypiperazine Amide Nanofiltration Membranes Chapter 7: Polymers and Composites Fatigue Crack Growth of Natural Rubber/Butadiene Rubber Blend Containing Waste Tyre Rubber Powders Enhancement of Heat Ageing Properties of Epoxidised Natural Rubber Blend Conversion of Bacterial Cellulose to Cellulose Nitrate with High Nitrogen Content as Propellant Ingredient Preliminary Study on the Effect of Sulphuric Acid to Nitric Acid Mixture Composition, Temperature and Time on Nitrocellulose Synthesis Based Nata de Coco Effect of Fabrication Method on Tensile Behaviour of Polysiloxane (POS) Filled Rice Husk Silica (RHA SiO2) Composites Purification on Kappa Carrageenan by Re-Precipitation Technique Thermomechanical Study and Thermal Behavior of Plasticized Poly(Lactic Acid) Nanocomposites Thermomechanical Properties and Thermal Behavior of Poly(Lactic Acid) Composites Reinforced with TiO2 Nanofiller Thermomechanical, Crystallization and Melting Behavior of Plasticized Poly(Lactic Acid) Nanocomposites Acoustic Performance Mixture of Natural Fibres of Oil Palm Frond (OPF) and Empty Fruit Bunch (EFB) Localized Deep and Shallow Traps of α-Peaks from Thermally Stimulated Current (TSC) Measurement on Thermoplastic Polymers Investigation on the Dielectric Properties of Palm Oil with Silicon Carbide Doping for Transformer Application Chapter 8: Batteries and Fuel Cells Electrical and Electrochemical Studies of Polymer Gel Electrolytes Based on Agarose-LiBOB and P(VP-co-VAc)-LiBOB Physical and Electrical Studies of High Molecular Weight Poly (Methyl Methacrylate) Based Solid Polymer Electrolytes Ab Initio Study on Structural Properties of NaFeSO4OH Cathode Material for Rechargeable Sodium Ion Battery Structural and Conductivity of NiO-BCZY Anode Functional Layer for Proton Conducting Fuel Cell The Impact of Zr Substitution on the Crystal Structure of Yb Doped BaCeO3 Solid Solution Prepared by a Sol-Gel Method Perovskite-Type Oxide-Based Dual Composite Cathode for Solid Oxide Fuel Cells: A Short Review The Effect of Ammonium Bromide on Methylcellulose Biopolymer Electrolytes for Electrical Studies Properties of Gel Polymer Electrolyte Based Poly(Vinylidine Fluoride-сo-Hexafluoropropylene) (PVdF-HFP), Lithium Perchlorate (LiClO4) and 1-Butyl-3-Methylimmidazoliumhexafluorophosphate [PF6] Poly(Vinyl Alcohol)/ N-Methylene Phosphonic Chitosan/ 2-Hydroxyethylammonium Formate (PVA/NMPC/2-HEAF) Membrane for Fuel Cell Application Effect of pH Value on the Synthesis of NiO Nanoparticles and Microstructure of NiO Based Composite Anode Chapter 9: Thin Films Vibrational Spectroscopy Analysis of Oligothiophene Blend Film Influence of Applied Potential on Electrodeposited ZnSe/ZnO Nanostructured Films for Photoelectrochemical Cell Influence of Various Target to Substrate Distances on the Structural and Optical Properties of Sputtered Gd-Doped ZnO Thin Films The Optical Properties of Thin Films Tin Oxide with Triple Doping (Aluminum, Indium, and Fluorine) for Electronic Device The Effect of pH and Monomer Concentration on Polyaniline Thin Films Grown Using Electrodeposition Chapter 10: Coatings and Surface Engineering Effect of pH and Immersion Time on the Corrosion Protection of SDBS:ZnSO4 Pretreated Mild Steel in Sodium Chloride Solution Corrosion Inhibition of Mild Steel by Electrodeposited Poly(M-Aminophenol) Coating Effect of Mechanical Agitation on Cr-Al2O3 Nanocomposite Coatings Fabricated from Trivalent Chromium Electrodeposition Chapter 11: Structural Materials Effect of Cooling Rate on the Volume Fractions of the Constituent Phases of the Tempcore Steel Rebars The Effect of Blast Exposure Distance on Hardness and Reduced Modulus Properties of Lead-Free Solder Compressibility Characteristics of Peat Soil Treated with MUF-P Resin Effect of Gamma Radiation on Micromechanical Behaviour of SAC305 Solder Chapter 12: Computational Methods and Numerical Investigation Effect of Vanadium Doping on Thermoelectric Properties of CaMnO3 Using First Principle Calculations Structural and Electronic Properties of Ag-Doped in Ba-Site of YBa2-xAgxCu3Oδ Using Density Functional Theory via First Principle Study Studying the Dynamics and Complexity of a 3D Laser Plasma System


Best Sellers


Product Details
  • ISBN-13: 9783035735802
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 317 Solid State Phenomena
  • ISBN-10: 3035735808
  • Publisher Date: 10 May 2021
  • Binding: Digital download and online
  • No of Pages: 586


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Solid State Science and Technology VII: (Volume 317 Solid State Phenomena)
Trans Tech Publications Ltd -
Solid State Science and Technology VII: (Volume 317 Solid State Phenomena)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Solid State Science and Technology VII: (Volume 317 Solid State Phenomena)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!