Buy Materials Science and Technology IX by Peerapong Pinwanich
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Materials Science and Technology IX: (Volume 751 Key Engineering Materials)
Materials Science and Technology IX: (Volume 751 Key Engineering Materials)

Materials Science and Technology IX: (Volume 751 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

The book is collected from papers that were submitted on the 9th International Conference on Materials Science and Technology (MSAT-9, December 14-15, 2016, Bangkok, Thailand) and is devoted to the modern issues of research and development in area of materials and materials processing technologies. We hope this collection should be useful for wide range of specialists from various branches of engineering activity.

Table of Contents:
Preface, Committees, Sponsors and Organizers Chapter 1: Metals, Alloys and Intermetallic Compounds The Thermal-Aging Effect on the Microstructure Evolution and Shear Strength of the Sn-Rich Au-Sn Soldering between Altic and Si Substrate in Microelectronics Effect of Cooling Rate on the Microstructural and Mechanical Properties of Sn-0.3Ag-0.7Cu-0.05Ni Solder Alloy Effect of Si Content on Mechanical Properties of Ti-Si-N Ternary Alloys Prepared by Spark Plasma Sintering Properties of Sintered Bronze-Graphite Containing Natural Anhydrite Properties of Sintered Bronze-Graphite Containing Calcium Sulfate Derived from Waste Plaster Molds The Effect of Bottom Ash Additions on the Properties of Sintered Bronze-Graphite Composites Effect of Compaction Pressure and Sintering Time on the Properties of Sintered Cu-10Sn Bronze Modification of Microstructure and Tensile Property of Sintered Fe-Cr-Mo-C Steel by Nickel Addition Microstructure, Hardness and Wear Properties of Sintered Fe-Mo-Si-C Steels with Spheroidal Graphite Iron/Compacted Graphite Iron-Like Effect of Aluminum Addition on AlxCoFeMnNiZn Multi-Component Production Mechanical Properties of As-Exposed Al-SiCp Composite Fabricated by Powder Injection Moulding Chapter 2: Corrosion, Coatings, Surface Engineering and Heat Treatment Hardfacing of 3.5% Chromium Cast Steel by Flux Cored Wire Arc Welding Process Effect of Impingement Angle on Erosion Resistance of HVOF Sprayed WC-10Co-4Cr Coating on CA6NM Steel Structural Characterization of Reactive DC Magnetron Co-Sputtered Nanocrystalline CrAlN Thin Film Solid Particle Erosion Resistance of Thermal Sprayed Nickel Alloy Coating Sintered Metal Microstructure Influenced by Deep Rolling and Carburizing Processes Corrosion Behavior of Al-Zn-In Sacrificial Anode Alloys Produced by Conventional Casting and Semi-Solid Metal Casting Processes Development of Pitting Corrosion Monitoring Device under Sodium Chloride Droplet by Means of Wet-Dry Cyclic Method Improvement of Structural, Morphological and Mechanical Properties of CrNx Sputtered Thin Films by Vacuum Annealing Process Study of Microstructure and Corrosion Resistance of Zinc Electrodeposits before and after Black Chromating Factors Affecting on the Corrosion Resistance of Electroless Ni-Zn-P Coated Steel Effect of Post-Curing Temperature and Mechanical Surface Treatment on Shear-Bond Strength of Asbestos-Free Brake Pad Effects of Air Exposure Time and Annealing Temperature on Superhydrophobic Surface of Titanium Dioxide Films Chapter 3: Processing Technologies and Equipments Meta-Heuristics for Engineering Optimisation - Applications to Metal Forming Processes Development of a Regression Model of Stk50Eu for a Hydrocyclone Development and Characterizations of a Projection Stereolithography Formability Analysis of Fukui Stretch-Drawing and Square Cup Drawing Using Strain and Stress Based Forming Limit Curves Effect of Feed-Flow Rate in a Solid-Liquid Hydrocyclone Based on Total Solid Recovery Equation Bending Limit Curves in Sheet Metal Bending Evaluation Fastenerless-Riveting Utilizing Friction Stir Forming for Dissimilar Materials Joining Chapter 4: Advanced Technologies for Materials Testing and Observation X-Ray Diffraction Analysis of ZnO Particles Prepared by Microwave Plasma Influence of Scanning Parameters on X-Ray Diffraction Peaks of Copper The Investigation of Ultrasonic Energy Attenuation in AISI 316 Stainless Steel Weld Joint Stress Measurement in Carbon Steel by Magnetic Barkhausen Noise Technique Chapter 5: Polymers and Composites Influence of Molecular Weight on the Non-Isothermal Melt Crystallization of Biodegradable Poly(D-Lactide) Gelatin Films and its Pregelatinized Starch Blends: Effect of Plasticizers Medicated Pressure Sensitive Adhesive Patches from STR-5L Block Rubber: Effect of Preparation Process Effect of Calcium Carbonate on Crystallization Behavior and Morphology of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) Simulation of Irradiation-Based Processing System for Natural Rubber Vulcanization The Smart Blending for Multilayer Structure of PLA/EVOH Morphology and Properties of Polyoxymethylene/Polypropylene/Microcrystalline Cellulose Composites Effect of Synthesized Ag Nanoparticles by Using the Different Amounts of Polyvinylpyrrolidone for Ag-Natural Rubber Hybrid Sheets and their Antibacterial Properties Physical and Mechanical Properties of Wood Plastic Composites from Teak Wood Sawdust and High Density Polyethylene (HDPE) Effect of Poly(D-Lactic Acid)-co-Polyethylene Glycol on the Crystallization of Poly(L-Lactic Acid) Effect of Octenyl Succinate Starch on Properties of Tapioca Thermoplastic Starch Blends Preparation of TiO2/WO3 Composite Nanofibers by Electrospinning Effect of Poly(Hexamethylene Succinamide) on Crystallization of Poly(L-Lactic Acid) Mechanical Behavior of Polystyrene-Grafted Natural Rubber/Natural Rubber Blend: Effect of Polystyrene Grafting Percentage Degradation of Silica-Reinforced Natural Rubber by UV Radiation and Humidity in Soil Degradation Test of Natural Rubber/Chitosan Composite Low Haze and Antifog Performance of 2-Layer Poly(Lactic Acid) Based Films Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates Mechanical and Thermal Properties of PLA Melt Blended with High Molecular Weight PEG Modified with Peroxide and Organo-Clay Poly(Lactic Acid)-Polybutylene Succinate-Activated Carbon Composite Foams Chapter 6: Ceramics and Functional Metal Oxides Development of Water Assisted Solid State Reaction for the Ceramic Materials Slip Degassing to Improve the Properties of Slip Cast and Reaction Bonded Si3N4 Fabrication of Low Cost Membrane from Anodic Aluminum Oxide Synthesis of Nanocrystalline Cobalt Ferrite by the Sonochemical Method in Highly Basic Aqueous Solution The Effect of Zirconium Oxide on Properties and Crystallization of Soda-Lime Silicate Glass Structure, Magnetic Property and Energy Band Gap of Fe-Doped NiO Nanoparticles Prepared by Co-Precipitation Method Piezoelectric and Ferroelectric Properties of KNbO3 Added Bi0.5Na0.5TiO3 Ceramics Chemical Composition-Microstructure-Dielectric Constant Relations of Mg-Doped Calcium Titanate Synthesized by Solid State Reaction Technique Development of Glass-Ceramics from Soda Lime Silica Glass Waste by Direct Sintering Method for Opal Imitation Effects of Aluminium Contents and Consolidation Techniques on Chemical Composition, Microstructure and Dielectric Properties of Strontium Titanate Influence of Temperature and Alkaline Activation for Synthesis Zeolite A from Natural Kaolin Effects of Ball Milling on the Properties of (Ba1-xCax)(Ti0.92Sn0.08)O3 Lead-Free Ceramics Chapter 7: Materials and Technologies for Electronics and in Energy Production r-GO/MWCNTs Nanocomposite Film as Electrode Material for Supercapacitor Pre-Immobilization of Anaerobic Mixed Culture on Electrode of the Upflow Bio-Filter Circuit Microbial Fuel Cell The Study of Crystallization of Polyfluorene and Fullerene Derivatives in Semiconducting Layer of Organic Solar Cells Two-Stage Combustion Burner Using Used Engine Oil as Fuel Pelletization of Iron Oxide Based Sorbents for Hydrogen Sulfide Removal BaO-Al2O3-SiO2-B2O3 Glass-Ceramic SOFCs Sealant: Effect of ZnO Additive Microwave-Assisted Preparation of Sodium Silicate as Biodiesel Catalyst from Rice Husk Ash Characterisation of NiO-YSZ Porous Anode-Support for Solid Oxide Fuel Cells Fabricated by Ceramic Injection Moulding Process Optimization and Characterization of YSZ Thin Film Electrolyte on Anode Substrate Prepared by Electrophoretic Deposition Technique The Effect of Calcium-Based Salt on Hydrothermal Carbonization of Corncob Influence of Bi2O3 on Crystalline Phase Content and Thermal Properties of Åkermanite and Diopside Based Glass-Ceramic Sealant for SOFCs Synthesis of Ternary Semiconductor Silver Bismuth Telluride by Chemical Bath Deposition Zeolite Supported Bimetallic Catalyst System: The Effect of Metal Loading for Catalytic Pyrolysis of Jatropha Residue Charged Iridium(III) Complexes with Varied Side Chain Length in Organic Light Emitting Diodes Effects of Buffer Layer Growth Temperature on Micro-Structures in the Cubic GaN Films Grown on GaAs (001) Substrates by MOVPE Effect of Silica Base Catalyst on Transformation of Methanol to Hydrocarbon Chapter 8: Building Materials Investigation of Physical, Mechanical and Thermal Properties of Building Wall Materials Geopolymerization as Cold-Consolidation Techniques for Hazardous and Non-Hazardous Wastes Influence of Portland Cement on Physical, Mechanical and Thermal Properties of Cellular Lightweight Concrete The Study on Physical and Thermal Properties of Geopolymer Pastes Optimum Partial Replacement of Cement by Nanosilica, Microsilica and Rice Husk Ash for Mass Production of Concrete Effect of Calcium Carbonate on Compressive Strength and Physical Properties of Alkali-Activated Lightweight Concrete Use of Waste Glass as a Reinforce Material in Calcined-Kaolin Based Geopolymer Effects of Aluminum Concentrations on Microstructure and Compressive Strength of Porous Concrete The Mechanical Properties Study of Waste Bakelite Aggregate Concrete Chapter 9: Materials for Biomedical Application In Vivo Testing of Sericin-Polyurethane Nanofiber Mats for Wound Healing in Rats Fluoride Recharge Ability of Resin-Based Pit and Fissure Sealant with Synthesized Mesoporous Silica Filler Comparison of the Release of Aloe vera Extracts from Poly(Vinyl Alcohol) Electrospun Fibers and Hydrogel Films for Wound Healing Applications Effect of Process Parameters on Biomimetic Deposition of Calcium Phosphate on 3D Printed Hydroxyapatite A Preliminary Study of the In Vitro Biocompatibility Testing of Silk Fibroin/Alpha Tricalcium Phosphate Composite Scaffolds for Bone Tissue Engineering Effect of M-Type Hexaferrites on Mechanical and Magnetic Properties of Hydroxyapatite Ceramics Synthesis and Characterization of Cerium- and Lanthanum Containing Bioactive Glass Effect of Solids Loadings, Sintering Temperatures and Sintering Periods on Microstructure of Hydroxyapatite Effect of Bleaching on Color Change of Stained Resin Composites PMMA Demonstrated Higher Elastic Modulus and Nanohardness Compared with Polyamide Denture Base Materials Flexural Strength and Cytotoxicity of ZCC, a Resin Modified Zinc-Calcium Liner Prototype The Effect of Thermoforming on Tear Strength of Ethylene Vinyl Acetate Mouthguard Material in Various Thicknesses The Use of Three Dimensional Printed Hydroxyapatite Granules in Alveolar Ridge Preservation Chapter 10: Materials and Technologies for Waste Recycling and Environmental Engineering Preparation of Activated Carbon from Sugarcane Bagasse Waste for the Adsorption Equilibrium and Kinetics of Basic Dye Modified Soil Compositions for Removal of Acetaminophen from Wastewater Determination of Tannin in Coffee Pulp Using Experimental and Theoritical Approches Exploitation of Ag3PO4 Impregnated Alginate Beads for the Photocatalytic Degradation of Dye Solution under Sunlight Irradiation Development of Specific Surface Area in Carbon Material Prepared from Cassava Tuber Char Using a Chemical Activation Assisted Sonochemical Process Performance Photocatalytic Degradation of Methomyl onto Composite Graphene Oxide/Bismuth Vanadate (GO/BiVO4) Nanoparticle The Photocatalytic Degradation of Methylene Blue Using Bismuth Vanadate (Bi2VO5.5) Powder Adsorption of Reactive Dyes Red 195, Blue 222, and Yellow 145 in Solution with Polyaniline-Chitosan Membrane Using Batch Reactor Adsorption of Reactive Dye (RB 222) in Solution onto Chitosan-Rice Husk Ash Composite Beads Cross-Linked with Glutaraldehyde On the Application of Electrocoagulation/Flotation (ECF) Technique for Cationic Dye Removals Using Aluminium Electrode and Sodium Dodecyl Sulfate (SDS) Fabrication Study of Hydrophobic Polyurethane Sponge for Oil Absorption Application Preparation, Characterization and Photocatalytic Properties of Rubber-TiO2-rGO Composite Sheets for Dye Decomposition in Wastewater The Effect of Carboxymethyl Cellulose from Various Agriculture Wastes on the Viscosity and Physical Properties of Low Concentration Solution of Surfactant Adsorptive Properties of Fly Ash Zeolite Synthesized via Microwave and Ultrasonic Pretreatments Using ZnO Nanorods Coated Porous Ceramic Monolith to Remove Arsenic from Groundwater Removal of Arsenic from Groundwater Using Nano-Metal Oxide Adsorbents Synthesis of Carbon Nanoparticles from Used Motor Oil and Benzene via Solution Plasma Process Development of Oil Palm Empty Fruit Bunch Fiber Reinforced Epoxy Composites for Bumper Beam in Automobile Improvement of Compressive Strength of Soil by Using Jute Fiber Waste Assessment of Hydrophilic Biochar Effect on Sandy Soil Water Retention Photo-Oxidative Degradation Polyethylene Containing Titanium Dioxide and Poly(Ethylene Oxide) Photocatalytic Activity of Cu-Doped Cerium Dioxide Nanoparticles Synthesis and Photocatalytic Activity of Visible-Light Responsive BiOBr/GO Composites Comparison Study of Photocatalytic Activity of Titanium-Rich Materials Derived from Natural Minerals Ores Using Acidic Leaching Photocatalytic Degradation Study of Titania Sol-Gel Coated on Commercial Unglazed Ceramic Tiles Photocatalytic Comparative Study of TiO2, ZnO, Ag-G-ZnO and Ag-G-TiO2 Nanocomposite Films


Best Sellers


Product Details
  • ISBN-13: 9783035730821
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 751 Key Engineering Materials
  • ISBN-10: 3035730822
  • Publisher Date: 22 Aug 2017
  • Binding: Digital download and online
  • No of Pages: 860


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Materials Science and Technology IX: (Volume 751 Key Engineering Materials)
Trans Tech Publications Ltd -
Materials Science and Technology IX: (Volume 751 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Materials Science and Technology IX: (Volume 751 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!