Advances in Nondestructive Evaluation
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advances in Nondestructive Evaluation: (Volumes 270-273 Key Engineering Materials)
Advances in Nondestructive Evaluation: (Volumes 270-273 Key Engineering Materials)

Advances in Nondestructive Evaluation: (Volumes 270-273 Key Engineering Materials)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

The aim of this 3-volume set is to bring together the expertise of scientists and engineers, in academia and industry, who are active in the field of non-destructive testing and evaluation. Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers cover activities which include analytical techniques as well as experimental case studies.

Table of Contents:
Preface An Assessment of the Current State and Future Challenges in Quantitative NDE Ultrasonic Characterization of Thin Film Material Constants and Defects Ultrasonic Guided Waves in Structural Health Monitoring Investigation of Magnetic Characteristics for a FeCo/Si Multilayer with the Variation of the Bias Potential at Substrate 3D Modeling of Porous Ceramics by High-Resolution X-Ray CT for Stress Analyses Residual Stress Assessment in API X65 Pipeline Welds by Non-Destructive Instrumented Indentation A Method for Quantitative Evaluation of Electrical Conductivity of Silicon Wafers by Millimeter-Waves Bending Behavior of Thin-Walled Cylindrical Tube Filled with Aluminum Alloy Foam Non-Destructive Sans Study of Al Nano Powder Compacts Finite Element Analysis of Residual Stress in NiCrAlY/Yttria-Stabilized Zirconia Coatings by Nanoscale Multi-Layered Deposition Effect of Overlap Length and Adhesive Thickness on Stress Distribution in Adhesive Bonded Single-Lap Joints Metallurgical Failure Characterization of 2.25Cr-1Mo Steel by Magnetic Property Analysis Non-Destructive Determination of Flow Properties through Analysis of Contact Characteristics beneath Indenter Arrangement of Probes for Measuring Case Depth by Means of Four-Point Probes Non-Destructive Characterization of Hydrogen Concentration in Zircalloy Prediction of the Crack Opening Behaviour for the Fatigue Crack Propagating in Welding Residual Stress Field Prediction of Material Properties of CF8M Cast Stainless Steel by Thermal Embrittlement Using Neural Network Surface Deflection of a Two Layered Half-Space Containing a Surface Crack Simplified Impact Analysis Based on Equivalent Static Analysis for Impact Design of TFT-LCD Panels Ultrasonic Evaluation of Creep Damage of High Temperature Metallic Materials with Different Microstructures X-Ray Stress and Diffraction Line Width Measurement by the Gaussian Curve and Parabola Methods A Spherical Indentation Technique Based on FE Solutions for Material Property Evaluation A Measurement Method of Residual Stress in Quenched Steel by Neutron Diffraction Residual Stress in Compact Disk Generated during Molding Process New Phased Array Ultrasound System Based on DSP/BOIS and PCI Bus Ultrasonic Detection of the Metallurgical Defects in the Steel and its Evaluation by Neural Network Based on the Wavelet Transform Noise Suppression High Frame Rate and High Resolution Imaging with Synthetic Aperture Analysis of Beta-Ray Data Using the Wavelet Thresholding Method and Extended Kalman Filter Generation of Three-Dimensional Images Using Ultrasonic Pulse-Echo Data for Fault Characterization Non-Destructive Visualization of Two-Phase Fields by the Electrical Impedance Tomography with an Adaptive Mesh Grouping Scheme 3D X-Ray Laminography with CMOS Image Sensor Using a Projection Method for Reconstruction of Arbitrary Cross-Sectional Images 3-Dimensional Imaging Technique for Shape Estimation of Flaw in Ultrasonic Non-Destructive Evaluation Multiple Transmit Focusing Using Modified Orthogonal Golay Codes for Ultrasound Nondestructive Testing Signal Analysis for the Condition Monitoring of a Check Valve Using a Time-Frequency Representation Multiplierless Sigma-Delta Modulation Beam Forming for Ultrasound Nondestructive Testing A Systolic Multi-Layer and Multi-Line Stereo Vision System for 3D Visual Inspection Transform Coding of Arbitrarily Shaped Regions in Ultrasonic Data Line Defect Detection in TFT-LCD Using Directional Filter Bank and Adaptive Multilevel Thresholding Time-Domain Noise Analysis of CMOS Readout Ic for CZT X-Ray Detectors Development and Characterization of a Flat-Panel Detector-Based Microtomography System Detection of Operational Abnormality of Ball Bearing with Ultrasonic Technique Non-Destructive Evaluation Using Laser-Generated Ultrasonic Waves A Study on the Characteristics of Surface Wave Induced by Phased Array Ut Implementation of Ultrasonic Immersion Technique for Babbitt Metal Debonding in Turbine Bearing Analysis of Residual Stress Effect in Wear-In Procedure Using Utrasonic Backward Radiation Study of Characteristics of Sound Field in Mixing Phased Array Simultaneous Determination of Ultrasonic Wave Velocities and Thickness of Solid Plates Effects of Rubber Loading on Back-Reflected Leaky Lamb Waves Model-Based Interpretation of Angle Beam Ultrasonic Testing Signals from Welded Joints Simulation of Angle Beam Ultrasonic Testing with a Personal Computer Ultrasonic Measurement of Gap Size in an Epoxy Layer between a Steel Sheet and Fiber Reinforced Plastics Leaky Lamb Waves of a Piezoelectric Plate Immersed in a Conducting Fluid - Analysis and Measurement Ultrasonic Identification of the Structural Changes due to the Impact Testing of a Charpy Specimen Used for the Reactor Pressure Vessel Materials Testing Automatic Non-Contact Defect Inspection of Cylindrical Shell Using a Laser-Ultrasonic Technique Evaluation of Thickness for NiCrAlY Coatings Sprayed on the Superalloy by Using Ultrasonic Spectral Analysis Comparison among Ultrasonic Velocity, Attenuation and Power Spectra of Different Heat Treatment Transformation Products in 38CrMoAl Steel Study on the Development of Multi-Path Ultrasonic Gas Flow Meter Two-Wave Mixing Interferometer for Ultrasonic NDT in Defect Detection Development of Phased Array and Tofd Simultaneous Inspection System for Coke Drum Development of a Scanner and a Control System for an Automated Ultrasonic Testing of Pipe Elbows Examination of Flaw Detection near the Surface by the Ultrasonic TOFD Method Modeling of Transmitting and Receiving Ultrasonic Probes for Use with the Mass-Spring Lattice Model Application of Ultrasonic Techniques for Evaluation of Thermal Fatigue Crack Ultrasonic Monitoring Technique for Icing and Flow in a Duct Fundamentals of Ultrasonic Measurement Models Calculation for Guided Waves in Pipes and Rails Experimental Studies on Guided Waves for the On-Line Inspection of Steam Generator Tubes Analysis of the Circumferential Guided Wave for Axial Crack Detection in a Feeder Pipe Application of Guided Waves for Detection of Scale Inside Water Supply Pipes Rapid, Long Range Inspection of Chemical Plant Pipework Using Guided Waves Ultrasonic Sensitivity Enhancement for Material Characterization Using Guided Wave Energy Loss Parameters Investigation of Guided Wave Scattering in Curved Waveguides Three-Dimensional Defect in a Plate Boundary Element Modeling for Guided Wave Scattering Fracture Behaviors and Acoustic Emission Characteristics of Pipes with Local Wall Thinning AE Features of PBX JOB-9003 Depending on Loading Rate An Advanced Acoustic Emission Sensor for Transient Elastic Wave Measurements Analysis of Acoustic Emission Behavior in Graphite Materials for Solid Rocket Motor Non-Contact Measurement of Acoustic Emission in Thin Specimen by Laser Interferometer The Use of Acoustic Emission Method to Evaluate Creep-Fatigue Interaction Nondestructive Evaluation of Damage Behavior of Ceramic under Thermal Shock Cycle Evaluation of Calendar Damage of Aircraft Structures Using Acoustic Emission Monitoring Nugget Formation of Nickel-Alloys in Micro Spot Welding Using Acoustic Emission Measurement Strategy of the Water Leakage into a Low Pressure Sodium Boundary for a Liquid Metal Reactor Development of PC-Based Leak Detection System Using Acoustic Emission Technique Analysis of Acoustic Emission Signals for Condition Monitoring of Check Valve at Nuclear Power Plants Fatigue Crack Detection in Coldworked Aluminum Alloys Using Acoustic Emission Technique Acoustic Emission for Structural Integrity of Concrete from Fresh to Damaged Principal Component Analysis of Eddy Current Signals Obtained from Steam Generator Tubes by Bobbin Probe Prediction of Bobbin Probe Eddy Current Signals for Tubular Components with the Conductivity and Permeability Variation Numerical Analysis of ECT Signals for Bulge and Dent Type Defect on SG Tube Signal Characteristics Observed in the Remote Field Eddy Current Testing Experiments Evaluation Results on Enhanced ECT Implementation of Steam Generator Tubes after a Korean SGTR Event Preparation of Eddy Current Impedance Plane Diagram by Finite Element Modeling Time-Domain and Frequency-Domain Eddy Current Simulations by the Finite Element Method Rapid Reconstruction of Natural Stress Corrosion Cracking from Eddy Current NDT Data Development of an ECT Technique for Discriminating between a Through-Wall/Non Through-Wall Crack in a Steam Generator Tube Applications of a Capacitive Probe to Detect Defects on Dielectric Materials Long-Distance Inspection of Pipes Using Electromagnetic Acoustic Transducer for Cylindrical Wave Flaw Detection of Railroad Wheel Tread Using EMAT The Detection of Defects in Paramagnetic Materials Using Locally Focused Electromagnetic Field Technique Numerical Consideration of Magnetic Camera for Quantitative Nondestructive Evaluation Magnetic Flux Leakage Testing Theory and Method for Magnetizer End Inspection The Method and Apparatus of Magnetic Nondestructive Testing for Boiler Waterwall Tube Investigation on Metal Magnetic Memory Signal of Surface Crack on Welding Scar in LPG Tank A Diagnostically Lossless Compression Method and FPGA Implementation for Pipeline Magnetic Flux Leakage Inspection Data Nondestructive Evaluation of the Irradiated Mn-Mo-Ni Low Alloy Steel by Magnetic Methods Development of a New Transformer Type Torque Sensor Simultaneous Detection of Size and Depth of Embedded Reinforcement in Concrete by Arraying Sensing Coils in a Probe Nondestructive Testing for Wire Rope A Study on Evaluation of Strain Behavior near Crack Tip by Self-Generated Magnetic Field from Externally Applied Stress Full-Field Measurement of Deformation of Recycled Paper Using Electronic Speckle Pattern Interferometry Damage and Failure Monitoring of Fiber-Metal Laminates Using Optical Fiber Sensors Quantitative Evaluation of Defect inside Tire by Shearography Separation of DOAS Measurements Data by Independent Component Analysis A Study of Overload Effects on Fatigue Crack Propagation under Cyclic Loading Using ESPI System Dynamic ESPI (DESPI) for Non-Destructive Testing Strain Measurement by Multiplexed Optical Loss Based Fiber Optic Sensor Study on the Band Gap Energy of CdIn2Te4 Crystal Obtained from the Photocurrent Spectroscopy Thermal Annealing Effects of the CdIn2Te4 Single Crystal Obtained from Photoluminescence Measurement 360-Deg Profilometry of 3-D Object by Multi-Reference-Planes Method Application of Micro-ESPI Technique for Measurement of Micro-Tensile Properties Measurement of the Piping Elbow Integrity Using the Fiber-Optics Technique 3-Dimensional Micro-Structure Inspection by Phase-Shifting Digital Holography Fiber-Optic Displacement Sensor to Detect the Vibration of the Thinned U-Section by FAC Optical Measurement of Two-Dimensional Surface Roughness and Texture Using a Scattered Light Intensity Distribution Detection of Real Defects in Composite Structures by Laser Techniques Nondestructive Evaluation of Internal Defects for Composite Materials by Using Shearography Application of Scanning Laser Source Technique for Nondestructive Flaw Detection Fatigue Life Estimation Using Diffusion of Laser Automatic Stress Analyzing System by Digital Speckle Photography Using 2-D Hybrid Method Detection of Spot-Type Defects on Liquid Crystal Display Modules Electrical and Optical Properties of SiOC Films with Low Dielectric Constant Reflow Characteristics of Copper in an Oxygen Ambient Metallic Multilayer Sputtering on Polycarbonate for EMI Shielding Ultrasonic Measurement of a Small Deformation of Hard Disk Drive Suspension Application of the ESPI Method for Thermal Friction Noise in Rear Cover of TV Interfacial Stresses in Viscoelastic Thin Layer due to Moisture Absorption Nondestructive and Destructive Characterization of Nano-Structured Multilayer Measurement of Monodisperse Particle Charge in DC Plasma Design of Vertical Type Thermal CVD Reactor with Rotating-Disk for New Generation Semiconductor Processes Fabrication of Nano-Structure by STM Tip Induced Atomic Diffusion Characterization of Heating Elements with Cobalt Silicide Films for Inkjet Printer Transparent Conducting ZnO Films on Polymer Substrates by Pulsed Laser Deposition Diagnosis and Reduction of Robot Arm Vibration for 12-Inch Wafer Spin Scrubber Effect of Al Composition on Luminescence Properties of Rare-Earth Implanted into AlGaN Evaluation Method of NFR Sliders Using Modal Analysis and Instrumental Variable Method The Special UTS for Ultra-High Temperature Measurement in the LaVa at SAC The Influences of the Wheel Profiles on the Wheel Wear of the Passenger Cars for the Same Bogie Type Investigation of the Effect of Crack Closure Stress on Microwave Dual Frequency Technique for Evaluation of Small Cracks Saw Sensor for Train Wheel Monitoring Finite Element Analysis and Static Load Test of a Wheelset of Gwangju EMU for Measuring Wheel/Rail Force Axial Flaw Detection in Pipes with Circumferential Wave Excited by Transducers of Equi-Refraction Angle Infrared Thermography and Modeling to the Concrete Deck with Internal Defects as a Non-Destructive Testing Measurement Methods of Crack Length for Real-Scale Pipe Specimen Nondestructive Mapping of Corrosion of Steel beneath Paint Coating by Synchrotron X-Ray Absorption Spectroscopy Nondestructive Evaluation of Pipes with Local Wall Thinning by Wavelet Analysis of Elastic Wave Assessment of Creep Damage of Power Plant Pipeline Steel by Ultrasonic Test Leak Location Identification of Water Pipes Using Elastic Waves Measurement of Performance and Heat Transport in Thermoacoustic Refrigerator An Adoption of Energy Dissipation Ratio for Real-Time Monitoring In Situ Measurement of Average Surface Temperature of a Diesel Engine's Combustion Chamber Numerical Simulation of Design for Cylinder Wall Considering of Scavenging Efficiency Nondestructive Fault Diagnosis of a Transformer Using Transfer Function Method Crack Detection in Press Fit Railway Axle Using Induced Current Focusing Potential Drop Technique Defect and Ripeness Inspection of Citrus Using NIR Transmission Spectrum Measurement of Sugar Contents in Citrus Using Near Infrared Transmittance Measurement of Moisture Content in Powdered Food Using RF Impedance Assessment of Internal Quality Using Colorimetric Information on Apples A Quantified Index for Rapid Evaluation of Starch Content in Apples Weed Detection in Paddy Field Using Machine Vision Evaluation of Internal Defects of Dried Red Ginseng Using Magnetic Resonance Techniques Evaluation of Fruit Firmness by Ultrasonic Measurement Uses of Hyperspectral and Multispectral Laser Induced Fluorescence Imaging Techniques for Food Safety Inspection Prediction of Melon Fruits Softening Using Density and Transmitted Light Analysis and Reduction of the Cross Talk in Micro-Machined Piezoelectric Ultrasonic Transducers Development of SH-SAW Sensors in Underwater Environment for Chemical Applications On-Chip Integration of Microfluid and Cell Detector for Micro Cell Counter Optimal Design of a Planar Array of Micro-Machined Ultrasonic Transducers Fabrication of a High-Aspect-Ratio Nano Tip Integrated Micro Cantilever with a ZnO Piezoelectric Actuator Novel Micropumps Using Gases as Pumping Sources Measurements of Mechanical Properties of Thin Polymer Films by Nanoindentation Technique Measurement of Micro-Tensile Properties for Hard Coating Material TiN Analyses of Elastic Waves in Aluminum/Barium Sodium Niobate and Quartz/Epoxy Phononic Structures The Study of Acoustic Band Gaps in 2-D Air/Aluminum and Steel/Epoxy Phononic Structure Oblique View Cone Beam Tomography for Inspection of Flat-Shape Objects Non-Contact Measurement of Dielectric Constant for a Nanometer-Thick Polymer Film Effects of Metal-Plasma Source Ion Implantation on Tribological Properties of a DLC Film Strength Evaluation of Swing Motion Bogie by Finite Element Analysis Development of a Code for 2D Elasto-Plastic Fracture Mechanics Analyses Using the Finite Element Alternating Method Particle Erosion of Aged HK40 Steel A Study on Fatigue Behavior at Pre-Crack Tip under Mixed-Mode Single Overloading (In the Case of Using the C-Scan Method) Evaluation of Material Degradation Using Electrical Resistivity Methods Multiaxial Fatigue Life Prediction of Duplex Stainless Steels with Thermal Aging at 430°C under Axial-Torsional Load Ultrasonic Evaluation of Fatigue Damaging Process of Cu Plates Joined with Sn-3.8wt%Ag-1.2wt%Cu Alloy Solder Finding the Degradation of Insulation Oil in a Transformer with a Fiber-Optic Sensor Numerical Analysis of Adhesive Thickness Effect on Fracture Toughness in Adhesive-Bonded Joints The Evaluation of Material Degradation in Modified 9Cr-1Mo Steel by the Electrochemical Technique Degradation Evaluation of 2.25Cr-1Mo Steel Using Electrical Resistivity The Analysis of Frictional Sliding Behavior on High-Tension Bolted Joints Using the Finite Element Method Detection of Low Cycle Fatigue in Type 316 Stainless Steel Using HTS-SQUID Ball Indentation Studies on the Effect of Aging on Mechanical Behavior of 1Cr-1Mo-0.25V Steel Prediction of Corrosion Fatigue Life of TMCP Steel Using the DCPD Method Plastic Limit Load Solutions for Cracks in Steam Generator Tubes Fatigue Properties of Magnesium Alloy under Biaxial Stress Fracture Behavior under Dynamic Biaxial Stress on Magnesium Alloy Evaluation of the Mixed Mode Stress Intensity Factor by Infrared Thermography Determination of Stress Intensity Factor near Crack-Tip of Anisotropic Polycarbonate Plate under Biaxial Loading Ultrasonic NDE of Closed Cracks-Sizing and Evaluation of Crack Opening Stress Intensity Factor under a No Load Condition Quantitative Phase Analysis of the Multi-Phase Alloys Using Neutron Diffraction Very Low Energy Neutron Radiography with Neutron Energy Selection System for Variable Image Contrast Development of CT Imaging System with Very Low Energy Neutrons A Monte Carlo Study of Contraband Detection Using Fast Neutron Resonance Technique Neutron Diffraction Measurement and Finite Element Analysis of Stress Distribution in Welded 316L Stainless Pipe Development of Flaw Sizing Technique by Radiographic Testing - Application of the "GUCHI" Technique Processing, Archiving and Management of Digital Image from X-Ray Flat-Panel Detector Applied Phase-Contrast Radiography with Polychromatic Thermal Neutrons Application of Neutron Radiography for Researches on Hanaro Characteristics of the IR Neutron Beam in Hanaro and the Recent Development for its Use in Dynamic Neutron Radiography Towards the Visualization of Fuel Cavitation in a Nozzle of a Diesel Engine by Neutron Radiography Quantitative Measurement of Void Fraction Distributions in Gas-Liquid Two-Phase Flow by Neutron Radiography Application of Digital Radiography to Aerospace-Craft Experiments on Radiographic Image Quality Using Low Energy Portable X-Ray Equipments Characteristics of a New Type Neutron Radiography Using Time-of-Flight Method Requirements of Neutron Tomography Standardization for Industrial Application Assessment of the Uncertainty and the Proficiency Test for Accrediting KOLAS of ISO 17025 for a Neutron Radiography Facility The Characteristics of a Mosaic Monochromator with a Cu Single Crystal A Study for Imaging of Scattered Radiation Sources Using a Pinhole Camera A Study for L/D Determination of Filtered Neutron Beams Including Scattering Neutrons Component Fabrication and Characterization of a PVDF Hydrophone Array Transducer Influence of Stress Singularities on the Vibration of Rhombic Plates with V-Notches or Sharp Cracks Performance Comparison between Circular and Elliptical Magnetic Circuits in Elliptical Microspeakers Used for Mobile Phones Computation of Dynamic Stress in Flexible Multi-Body Dynamics Using Absolute Nodal Coordinate Formulation A Study on DC Motor Noise Reduction Structural Vibration Analysis of Electronic Equipment for Satellite under Launch Environment Vibration-Based Non Destructive Structural Damage Detection Optimal Sensor Placement in Structural Control Systems Free Vibration of a Circular Membrane with a Concentric Circular Crack Identification of Wave Propagation on the Beam by Using Combined Higher Order Time-Frequency Method The Effect of Contact Stiffness on the Out-of-Plane Vibration of a Disc Brake System Calculation of Truck Weights by Bridge Diagnostic System On the Feasibility of Deriving Transfer Function from Rayleigh Wave in the Impact-Echo Displacement Waveform Nondestructive Testing Method and Technique for Cable-Stayed Bridge Steel Cables Soundness Evaluation of a Tunnel Concrete Lining by Using the Hammer Impact-Induced Sound Wave Assessment of Post-Fire Residual Strength of Reinforced Concrete Using Ultrasonic Pulse Velocity Identification of Strength-Reducing Characteristics in Lumber Using Microwave Scanners State-of-the-Practice & Challenges in Non-Destructive Evaluation of Utility Poles in Service Time-Frequency Analysis for Impact Echo-SASW (IE-SASW) Method The Development of Concrete Quality Evaluation System - Automation of Measurement and Wireless Data Transfer Nondestructive Evaluation of Vibration-Mitigated Concrete by the Forced Resonance Test Study on Detection Limit of Buried Defects in Concrete Structures by Using Infrared Thermography Radar Image Processing for Detection of Shape of Voids under Concrete Slab Quality Control of In-Situ Concrete by Ultrasound Monitoring Evaluation of Concrete Properties by Stress Wave Propagation Methods Measurement of Acoustic Emission and Source Location Considering Anisotropy of Rock under Triaxial Compression Basic Study on Estimation for Water-Cement Ratio of Fresh Concrete Using Ultrasonic Wave Characterization of Stress-Induced Damage in Rock by the Moment Tensor Analysis of Acoustic Emission Non-Destructive Evaluation Techniques of Reinforcing Steel Corrosion Using Infrared Thermography Influence of Shear Load on the Characteristics of Acoustic Emission of Rock-Concrete Interface Evaluation of Freeze-Thaw Damage in Concrete by One-Sided Stress Wave Velocity Measurement Technique Damage Evaluation for Steel Bridge Member Using Compliance Technique Non-Destructive Testing and Evaluation of Civil Infrastructures Using Stress Wave Propagation Damage Evaluation for Railway Structures by Means of Acoustic Emission Observation of Internal Cracking in Concrete by Virtual Reality Modeling of Acoustic Emission Moment Tensor Analysis Practical Use of Half-Cell Potential Method for NDE of Corrosion of Reinforced Concrete Structure Low Frequency Elastic Wave Diagnosis Method for Detecting the Internal Defects of Concrete Using Metal Magnetostrictive Devices Characterization of Unsaturated Particulate Materials Using Elastic and Electromagnetic Waves Investigation of the Track Irregularities Reconstruction Methods New Modular Concept for Level 3 - Qualification in Germany Development of the Korean Standardized Carbody for the Rubber-Tired Light Rail Vehicle Leak Rate Calibration System Personnel Qualification and Certification in the ISO/TC 135 Community Identification of Stress-Free State and Mapping of Residual Stress Fields by Laser Interferemetry Estimation of Failure Probability Using Boundary Conditions of Failure Pressure Model of Buried Pipelines Applications of Advanced Indentation Technique to Pre-Qualification and Periodic Monitoring of Strength Performance of Industrial Structures Burst Pressure of Damaged Steam Generator Tubes from Plastic Instability Analysis The Evaluation of Fatigue Life in TWB Sheet Using Magnetic Method Nondestructive Evaluation of Defects in Conductive and Non-Conductive Materials by High-Frequency Signal Transmission Characteristics Technique The MTTF and Reliability Evaluation of a PLC System Safety Evaluation of Socket Weld Integrity in Nuclear Piping Piping Failure Analysis for the Korean Nuclear Piping Including the Effect of In-Service Inspection Analysis of Singular Thermal Stresses in Polymeric Layer Deposited on Concrete Substrate Statistical Reliability Assessment of UT Round-Robin Test Data for Piping Welds Reliability Analysis of the Reactor Protection System with Fault Diagnosis Comments on Probabilistic Fracture Mechanics Analysis of Cracked Components Detection of Micro-Delamination in Electronic Packaging by Using the Ultrasonic Nonlinearity An Effective Method for Measuring Elastic Modulus of Large TFT-LCD Panels A Development of Optimization Tool for Mechanical Shock Proof Design of a Digital Display Panel Measurement of Residual Stress in PDP Glass by Chemical Etching Method Imaging of Defects in Thin Plate by Scanning of Laser-Generated Focused-Lamb Waves The Novel Concepts for Reliability Technology Inspection of Inhomogeneities in Carbon/Phenolic Matrix Composite Materials Using NDE Techniques Development of Motorized Ultrasonic NDE Scanner for Layup Evaluation of CFRP Composites Electric Resistance Change Method for Cure/Strain/Damage Monitoring of CFRP Laminates Evaluation of Thermal Deformation Process of Nickel Base Active Composite by Laser AE Technique Fracture Processes and Acoustic Emission in Continuous Fiber Reinforced Composite Laminates Nondestructive Evaluation of Adhesively Bonded Joints Using Ultrasonic Technique Development of On-Line Monitoring System and AE Characterization of SMA Composite under Severe Conditions Development of Fieldable Systems for Inspecting Aircraft Composite Structures Development of the Two-Step Delamination Identification Method by Resonant and Anti-Resonant Frequency Changes Delamination Identification of CFRP Structure by Discriminant Analysis Using Mahalanobis Distance Influences of Cracking Behavior of Coating Film on Fatigue Strength in Alumina Coated Stainless Steels Evaluation of Apparent Interface Toughness of Ceramic/Metal Composites Using Indentation Method Analysis of Bending and Impact Damage Behavior of CFRP/Al7075 Hybrid Composite Plate by NDT Technology Air-Coupled Ultrasonic Inspection Method for CFRP Nondestructive Evaluation of Interfacial and Damage Sensitivity for Single Fiber/Epoxy Composites with PVDF and PZT Sensors Using Micromechanical Test and Acoustic Emission A Fundamental Study of Detecting Delaminations in Composite Tanks by Using Lamb Waves Fiber Arrangements on Densification Behavior of Titanium Metal Matrix Composites Impact Response and Damage of Composite Shell with Various Curvatures The Effects of Temperature Change on the Bending Strength of CF/PEEK Laminates after Impact Analysis for Properties of Discontinuously-Reinforced Composites on the Basis of Micromechanics Embedded PVDF Film Sensor for In-Situ Monitoring of Structural Integrity of Laminated Composites Effect of Fiber Volume Fraction on Monitoring Delamination of CFRP Laminates with Electric Resistance Change Method Application of Localized Flexibility Method to Damage Detection of CFRP Space Frame Acoustic Emission during Fracture Process of Rubber-Modified Epoxy Resin Measurement of Moisture Absorption Ratio of FRP Using Micro Polymer Sensor Cure Monitoring and Microfailure Sensing of Single-Fiber Reinforced Cement Composite by Measurement of Contact Resistance and Acoustic Emission Detection of Crack Source Location on RC Structures Strengthened with CFRP Plate for Health Monitoring System Critical Threshold Value for Monitoring & Management of Cable Tension Force in Cable-Stayed Bridge Health Monitoring Method Using Committee of Neural Networks Running Safety Estimation of Korean Style High Speed Railway Vehicle Wireless Instrumentation System for Measuring the Dynamic Characteristics of a Beam Plastic Collapse Evaluation on the Notched Stainless Steel Piping Subjected to Combined Tension and Bending by Photo-Elastic Coating On-Line Monitoring of Cable Defects by RF Detection An Analysis of the Characteristics of SPG Bridges Using NExT and ERA for Real-Time Monitoring A Faster Wavelet Analysis Algorithm Based on DSP/BIOS Design Strategies for Phased Array Ultrasound Systems in Nondestructive Testing Potential for the Diagnosis of Micro Bone Fractures Using an Ultrasonic C-Scan Technique Ultrasonic Backscatter Response to Blood Flow Disturbance by a Severe Eccentric Stenosis Imaging of Thermally Ablated Tissue Using Ultrasonic Elastography The Fatigue Delamination due to Four Different Stacking Sequences of Ankle Foot Orthosis (A.F.O.) in GFRP Laminates Ultrasonic Techniques to Assess the Properties of Hard and Soft Biological Tissues A Nondestructive Diagnostic Modeling for Muscular Dysfunction of Human Pharynx Using Finite Element Method Evaluation of Dynamic Behavior of the Human Middle Ear with Nonhomogeneity by Finite Element Method Nondestructive Evaluation of the Mechanical Behaviors of the Human Femoral Head with Osteonecrosis Evaluation of Human Bone Elastic Stiffness by Resonant Ultrasound Spectroscopy and Micro Finite Element Method Quantitative Estimation of Diffused Liver Diseases Using Ultrasound Echo Signal In Vitro Evaluation of Fracture Resistance of Various Thickness Fiber-Reinforced Composite Inlay FPD Dynamic Bridge Structure Monitoring Using Smart Elastomeric Bearing Equipped with PVDF Polymer Film ER/MR Fluids Characterization at High Frequencies Dynamic Strain Measurement with Fiber Bragg Grating Sensor System for Smart Structure Effects of Shape Memory Alloys on Structural Modification Application of Magnetorheological Fluid to Semi-Active Control of Building Structures by BRI and Partners Multiplexing of FBG Sensor by Light Source Intensity Modulation Measurement of Material Properties of Composites under High Temperature Using Fiber Bragg Grating Sensors Simultaneous Monitoring of Crack Signals and Strain of Composites Using a Stabilized EFPI Sensor System Design and Analysis of Multilayer Surface-Antenna-Structure Collocation Strategies of Piezoelectric Sensor and Actuator Pair for Smart Structures Effect of Crack Closure in Shape Memory Alloy TiNi Fiber Reinforced/CFRP Composite Distribution of Unique Performances for Shape Memory Alloy Composite Effect of Temperature Caused for Mechanical Characteristics and Crack Closure Effect of Shape-Memory Alloy Fiber Reinforced Composite Active Vibration Control Using Cantilever Beam of Smart Matrix Composite with Embedded Shape Memory Alloy Application of Smart Materials to Composite Structures Risk-Informed Inservice Inspection Program for Ulchin Unit 4 Criterions of UT Thickness Measurement on Thinned Pipe Management Program Equipment Development and Nondestructive Examination Techniques for Inspection of Reactor Pressure Vessel Head Penetration Application of Nondestructive Testing Technique for Safeguards Inspection The Development of Fusion Sensor Techniques for Condition Monitoring of a Check Valve Development of a Web-Based Integrity Evaluation System for Primary Components in a Nuclear Power Plant Development of an On-Line Ultrasonic System to Monitor Flow-Accelerated Corrosion of Piping in Nuclear Power Plants Inspection of the Defect in an Irradiated Fuel Rod Using the Probe of a Differential Encircling Coil Type Development of an Integrity Evaluation System on the Basis of Cooperative Virtual Reality Environment for Reactor Pressure Vessel Irradiation Behavior of Fe-Cu Model Alloys Analyzed with the Positron Annihilation Lifetime Technique Hand-Eye Coordination of a Robot for the Automatic Inspection of Steam-Generator Tubes in Nuclear Power Plants Fatigue Analysis of Nuclear Welded Structures Considering FSRF Based on NDE SANS Study of Precipitate and Recrystallization in Ti-Added Extra Low Carbon Steels A Feasibility Study on Aluminum Nitride Pieces for an Application to the Nuclear Power Plant Flux Detector Development of a Neutron Tomography at HANARO Detection of Cracks in Stud Bolts of Nuclear Reactor by Novel Ultrasonic Technique Development of Ultrasonic Inspection Technique for Epoxy Liner in Nuclear Fuel Interim Storage A Study on the Effect of Welding Residual Stress on Fatigue Behavior by Finite Element Analysis A Study on the Effect of Welding Residual Stress and Weld Bead Profiles on Fatigue Behavior On-Line Penetration Depth Measurement System Using Infrared Temperature Sensing on Co2 Laser Welding Stereo Vision System for Welding Line Tracking Robot Outline of Laboratory Accreditation Scheme for Nondestructive Testing Organizations Studies on the Microstructure and Corrosion Characteristics of Electrical Resistance Welded Steel Measurement of Weld Bead Defect for Shock Absorber Using Laser Vision Sensor A Study of Nondestructive Weld Quality Inspection and Estimation during Resistance Spot Welding Non-Destructive Characteristics Evaluation for Low Vacuum Dry Pumps in the Semi-Conductor Manufacturing Process Line A Study on an Accurate Seam Detecting Sensor for Laser Welding Automation Neural Network Analysis for Evaluating Welding Process CO2 Laser Welding of 800MPa Grade TRIP Steel A Study on the Mechanical Behaviors in Welded Parts by Numerical Simulation A Study on the Lamination Produced by Corner Joint Welding of Ultra Thick Plate by Newly Designed Z-Quality Evaluation Methods Basic Experiments by Hybrid Welding to Steels for Shipbuilding Welding of Steel and Aluminum by Nd-YAG Laser


Best Sellers


Product Details
  • ISBN-13: 9783035706345
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 270-273 Key Engineering Materials
  • ISBN-10: 3035706344
  • Publisher Date: 15 Aug 2004
  • Binding: Digital download and online
  • No of Pages: 2524


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advances in Nondestructive Evaluation: (Volumes 270-273 Key Engineering Materials)
Trans Tech Publications Ltd -
Advances in Nondestructive Evaluation: (Volumes 270-273 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advances in Nondestructive Evaluation: (Volumes 270-273 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!