Advances in Engineering Plasticity: (Volumes 177-180 Key Engineering Materials)

Volume is indexed by Thomson Reuters CPCI-S (WoS). From the early industrial revolution, metal working has been the major driving force for the development of many manufacturing technologies. “Advances in Engineering Plasticity” reports on recent developments in the field of metal forming and plasticity research from both the fundamental science and industrial application perspective.

Table of Contents:
Preface Statistical and Stochastic Description of Microvoid Evolution Observed in Dynamic Failure of Ductile Materials Plastic Spin and Evolution of an Anisotropic Yield Condition Finite Element Modeling of Deformation Behavior of Foaming Glass Multiple Strata Cyclic Plasticity Model for Polycrystalline Metal Study on Elasto-Viscoplastic Constitutive Equation of Volcanic Cohesive Soils New Constitutive Models for Concrete: Plastic Hardening and Post-Failure Damage Models Influences of Strain Rate and Temperature Variation on Material Intrinsic Length of Plasticity Strain Gradient Theory A Homogenization Method for Analysis of Heterogeneous Cosserat Materials Ductile Shear Fracture Mechanics Rapid Propagation of a Mode I Crack in an Elastic-Viscoplastic Medium with Loading and Unloading Processes Discing Around Perforations of Thin Plates and Tubes by Hemispherical-Nosed Missiles or Spheres Feasibility and Reliability of Genuine Solid State Press Bonding of Aluminum Alloy 5083 Stress Field near Crack Close to Bonding Interface in Explosion Clad Plate Variable-Amplitude Fatigue Strengths of Fiber-Metal Laminate: GLARE The Failure of a Pretensioned Thin Al Strip under Irradiation of a Laser Beam A Microcrack Based Continuous Damage Model for Brittle Geomaterials Environment-Assisted Cracking of Thermostat Bimetal in 3.5% NaCl Solution Modelling of Deformation Textures of Cold Rolled BCC Metals by the Rate Sensitivity Model Plasticity in Mono-Crystalline Silicon under Complex Loading Conditions Dislocation Structure and Deformation Mechanism for the Anomalous Yield Behavior in Fe3Al Intermetallic Alloys Modelling Screw Dislocation Mobility in the Bulk and in the Vicinity of Crack Tips using a Peierls-Nabarro Approach Microscopic Observation of Plastic Deformation of Polycrystalline Iron Single Grain Analysis of Strain Hardening and Internal Stresses in Cold Rolled IF-Ti Steel with a new High-Resolution Microdiffraction Technique Self-consistent Estimates for Nonlinear Viscoelastic Polycrystals: a Simplified Resolution of the Affine Formulation Adapted to Monotonic Loading Paths Microscale Spatial Distribution of Dislocations and Long Range Internal Stresses in Cold Worked bcc Fe X-Ray Microbeam Diffraction Studies of Large Strain Dislocation Substructure Formation in OFHC Copper Moving Plastic Discontinuities Effect on Overall Behaviour of Metals High Temperature Plastic Deformation and Microstructure of Fe-9at%Si Polycrystals Evolution of Grain-Scale Microstructure during Large Strain Simple Compression of Polycrystalline Aluminium Practical Constitutive Models Covering Wide Ranges of Strain Rates, Strains and Temperature Crash Analysis of Thin-Walled Structures with an Elasto-Plastic Explicit Finite Element Method Ductility and Brittleness Simulation during Micro Void Evolution Process of Ductile Material Using Rigid Plastic FEM Based on Gurson Type Yield Function Interpretation of High Strain-Rate Tested Results by Micrographic Evidence Behaviour Characterisations of Sheet Metals, Metallic Honeycombs and Foams at High and Medium Strain Rates The Effect of Strain Rate and Martensite Volume Fraction on Tensile Impact Behavior of Dual Phase Steels Effect of Soft Material on Insulating Impact Pressure into Explosive Ballistic Performance of Hot Isostatically Pressed (HIped) Ti-Based Targets Dynamic Yield Stresses of Porous Materials Made of Bronze and Iron Influence of Axial Pre-Load on Plastic Failure of Beams Subjected to Transverse Dynamic Load Rate-Dependent Constitutive Law and Nonlocal Spallation Model for Concrete Subjected to Impact Loading Characterization of Strain Rate-Dependent Shear Response of 63Sn/37Pb Solder under Uniaxial Torsion Dynamic Response of an Elastic-Plastic Free-Free Beam Subjected to Impact at any Cross-Section along its Span Saturated Impulse of Elastic-Plastic Beams under Concentrated Pulse Force Effects of Damping on Dynamic Plastic Response of Circular Plate Embedded Cell Model of Three-Dimensional Two-Phase Composites Constitutive Behaviors of Discontinous Reinforced Composites Plasticity Theory for Particulate Composite Materials with Imperfect Interfaces Micromechanical Analysis for Off-Axis Nonlinear Behavior of Unidirectional Carbon Fiber Composite at Room and High Temperatures A Variational Method for Fiber Stress Profiles in Unidirectional Composites with Matrix Creep Basic Study of Progressive Crushing Mechanism Numerical Simulation Technique for Progressive Crushing Behavior of FRP Tube under Impact Loading Study on the Stress and Failure of Elastic-Plastic Interface for Fiber Composite Tensile Properties of Thermoplastic Weft Knitted Composites Effects of Fine-Particle Addition on Plasticity of Polymer Composites Static and Dynamic Tensile Responses of Glass Woven Fabric Reinforced Composites Orientation Relationship and Mechanical Properties of Rolled Polypropylene Sheets Mechanical Properties and Fracture Mechanisms of Fiber Reinforced PBT/PC/Elastomer Blends A Parametric Analysis of Surface Quality in Diamond Turning of an Al6061/SiCp Metal Matrix Composite An Investigation of Surface Roughness Formation in Ultra-Precision Machining of Al6061/SiCp Metal Matrix Composites The Localized Internal Necking Process between Microvoids in a Plastic Solid A Study of Adiabatic Shear Plugging in Ti6Al4V Alloy A Simplified Approach to Material Instability under High Strain-Rate Stretching Strain Gradient Effect on Initiation of Adiabatic Shear Localization in Metal Matrix Composites FEM Simulation of Torsion Tests for Pre-Deformed Lead with Work-Softening Transformation Conditions in SMAs under Multiaxial Stress State: Experiments and Simulations Constitutive Equation and Computational Simulation of Deformation Behavior of TRIP Steels Deformation Behavior of Elastic-Plastic Materials Containing Instantly Transforming Inclusions Transformation Condition in a Fe-Based Shape Memory Alloy Under Thermomechanical Loadings Transformation Induced Plasticity in Maraging Steel: An Experimental Study Prediction of Mechanical Properties of TRIP Steels by FEM and Micromechanics Some Deformation Features of Polycrystalline Superelastic NiTi Shape Memory Alloy Thin Strips and Wires under Tension Superelastic NiTi Memory Alloy Micro-Tube under Tension— Nucleation and Propagation of Martensite Band Analysis of Tensile Strength of Y2O3 Stabilized ZrO2 Homogenous Rolling and Texture Modelling in Cold Rolled Low Carbon Steel Springback of Laterally Loaded Circular Plates Deep Drawability of 5083 Al-Mg Alloy Sheet at Elevated Temperature and its Prediction An Inverse Problem of Reinforced Panels Forming FE Analysis of Springback in Hat-Bending with Consideration of Initial Anisotropy and the Bauschinger Effect Computer-Aided Process Design for Tension Levelling of Clad Sheet Metal Direct Evaluation of Sheet Metal Forming Properties under Various Deformation Conditions On Alternative Representation of Forming Limits Computer Aided Process Planning (CAPP) System for Non-Axisymmetric Deep Drawing Process Experimental Study on Large Deformation in Fine-Blanking Process by Implementing Different Stripper Designs: Vee-Ring Type Vs. Plate-Type A Study on Microstructure and Texture Evolution in Homogeneously Cold Rolled 93/7 Brass Determining and Valuation the Zones of Minimal Reserves of Working Capacity for Concave and Convex Die Experiments and Analysis of the Effect of Local Induction Heating on Deformation Numerical Simulation of Non-Adiabatic Shear Banding in Metal Forming Process using Finite Element Method Deformation Characteristics of Helical Gear with Small Bevel Angle during Net Shape Forging Process Effect of Alloying Element on the Mechanical Behavior and Superficial Defects in Thixoforged Components of Al-Si Alloys Finite Element Numerical Simulation Modeling for Reheating Process of Semi-Solid Forming Design and Analysis of a Computer Integrated Open Die Forging Cell Measurement of Friction Characteristics using a Three Pin System An Internal Variable Approach to Superplasticity of Microduplex Pb-Sn Alloys The Effect of Temperature and Strain Accumulation on the Superplastic Deformation Behavior of an Al-Cu-Zr Alloy Superplasticity-like Deformation of a Coarse-Grained Al5052 Alloy The Parameter Identification of Superplastic Constitutive Model Using Optimization Texture Evolution during Low Temperature Superplasticity in Aluminum Alloys The Strain Rate Cycling Induced Superplasticity and its Computer Optimization in Titanium Alloys Discussion on Constitutive Equations of Fine-Grain Superplasticity A Study on the Tensile Deformation of Superplastic-Like Al-Al3Ni Eutectic Alloy with [111] Fiber Texture Electron Backscattered Diffraction Study on Superplastic Properties of Coarse-Grained Fe-27at.% Al Based Alloys The Effect of Reinforcement on Superplastic Flow in Powder-Metallurgy Processed Aluminium Matrix Composites Research of Al-Zn 10-Mg-Zr Superplastic Alloy Cavity Nucleation at Particles during Deformation at Elevated Temperature Coupled-Multilevel Modeling for Hot Deformation and Sintering Improvement of Post-Deformation Properties by Static Annealing for a High Strain Rate Superplastic Composite Project of 'Towards Innovation in Superplasticity' in Japan Softening Effects in the Bending of Tubular Structures and Components Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings Dynamic Buckling of a Column with Adhesive Bonds Collapse Analysis of Thin-Walled Structures by Finite Element Limit Analysis The Characteristics of Collapse for Thin-Walled Members by Inclined Impact Load Dynamic Plastic Buckling of Circular Cylindrical Shells Under Axial Impact Modeling of Elastic-Plastic Beam-on-Foundation Finite Element Analysis of Thin Walled Tubes under Point Loads Subjected to Large Plastic Deformation Experimental Studies of Thin-Walled Circular Aluminium Tubes under Axial Loading Large Deformation Model of Flat-topped Conical Shell under Axial Compression Large Plastic Deformation of W-Beams Used as Guardrails on Highways The Load Carrying Capacity of the Pressure Vessel with Two Defects along Axial Direction The Calculation of Shakedown Loads for Contact Problems On-Line Measurement of Heat Generation by Plastic Deformation in Some Structure Members Hybrid Control of Inelastic Structures during Earthquake Thin - Film Forming of Cluster Diamond-Dispersed Aluminum Composite by Dynamic Compaction Microstructure and Friction Properties of Cluster Diamond Dispersed Cu Composite Structural Analysis for Lightweight Design of a Seat Frame in Automotive Vehicles Gradient Aspects of Crystal Plasticity at Micro and Macro Scales