Applied Physics and Material Applications II
Home > Mathematics and Science Textbooks > Science: general issues > Nanosciences > Applied Physics and Material Applications II: (Volumes 675-676 Key Engineering Materials)
Applied Physics and Material Applications II: (Volumes 675-676 Key Engineering Materials)

Applied Physics and Material Applications II: (Volumes 675-676 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

The aims and contents of the ICAPMA 2015 special volume are to facilitate an exchange of information on best practices for material science and applications. It will provide a chance for physicists and scientists in academia, industry, and government to address the most innovative research and development including technical challenges and to discuss their ideas, results, work in progress and experience on all aspects of applied physics, material science and applications. ICAPMA 2015 was organized by Suan Sunandha Rajabhat University (SSRU). This conference also was co-organized by Center of Excellence in Glass Technology and Materials Science (CEGM), Nakhon Pathom Rajabhat University (NPRU), Thermoelectric Research Center (TRC) and Center of Excellence on Alternative Energy (CEAE), Sakon Nakhon Rajabhat University (SNRU), Muban Chombueng Rajabhat University (MCRU) and National Electronics and Computer Technology Center (NECTEC).

Table of Contents:
Preface, Committees & Sponsors Chapter 1: Chemical Materials and Technologies Calculation of Carrier Mobility in Copper Phthalocyanine by Simple Hopping Model Biosorption of Zn(II) from Aqueous Solution by Amusium pleuronectes Shell Degree of Esterification and Gelling Properties of Pectin Structure in Coffee Pulp Density Functional Theory (DFT) Study: Electronic Properties of Silicene under Uniaxial Strain as H2S Gas Sensor Pigment Extraction of Safflower, Dyeing Properties and Antimicrobial Study of Dyed Silk The Isotope Effect Coefficient with Pseudogap and One-Band Superconductor Development of Microemulsion of Phytosteryl Glycoside in DMSO and Tween 20 for Increase Antiamoebic Activity Reducing Sugar Production from Agricultural Wastes by Acid Hydrolysis Structural and Electronic Properties of β – CuPc: First Principles Study Chapter 2: Nanosciences and Nanotechnology Development of Nanohole Array Patterned by Laser Interference Lithography Technique Functionalization of Au Nanoparticles on ZnO Nanorods through Low-Temperature Synthesis Hydrothermal Synthesis and Characterization of ZnO:F Nanorod Structure Influence of Growth Conditions on Morphology of ZnO Nanorods by Low-Temperature Hydrothermal Method Preparation of Nanoemulsion from Sacha Inchi Oil/Water by Emulsion Phase Inversion Methods Size and Shape Tailoring of ZnO Nanoparticles Solid Lipid Nanoparticles from Active Compounds of Mango Seed Kernel Extract Structural and Optical Properties of F-Doped ZnO Nanoparticles Synthesized by Co-Precipitation Process Synthesis of Silver Nanoparticles by Sparking Process The Entrapment of Vitamin E in Nanostructured Lipid Carriers of Rambutan Seed Fat for Cosmeceutical Uses Treatment of Wastewater from Rubber Processing Using Hydroxyapatite and Lampang Clay Nanocomposite Filters Alcohol Sensing Properties of SnO2/CNT Nanocomposites Synthesized by Microwave-Assisted Process Development of Self-Striking Red Glass from Gold Nanoparticles Dielectric Property of NaCu3Ti3NbO12 Ceramics Doped with Small Amount MgO Nanopowder Effect of Cobalt Dopant on Structural and Optical Properties of Co-Precipitated TiO2 Nanopowders Effects of CdS-TiO2 Working Electrode Layer on Dye Sensitized Solar Cell Investigated by Impedance Spectroscopy Effects of Sintering Temperature on Physical and Mechanical Properties of HA/YSZ Nanocomposites Electrical Properties of Single-Walled Carbon Nanotubes due to Compressive Load Enhanced Antibacterial Activity by Au Nanoparticle Decorated ZnO Nanorods Fabrication of Zinc Oxide Nanorods for Photoelectrochemical Water Splitting Application Green Synthesis and Characterization of Iron Nanoparticles from Holy Basil Leaves and Mint Leaves Growth of Zinc Oxide Nanoparticles on Graphene Assembly Using to Detect of Acetone Concentrations Hydrothermal Growth of ZnO Nanorods along the Ultra-Thin ZnO Seed Layer Prepared by Magnetron Sputtering Hydrothermal of ZnO Nanorod Arrays on ITO Transparent Conductive Oxide Substrate: Effect of Precursor Concentration Modification of Structural and Vibrational Properties of ZnO Nanoparticles Prepared by Simple Chemical Precipitation Method Optimizations of Sealing Conditions for Blank Silver Nanorod Used as SERS Substrates Preparation of Nanosized Manganese Oxide Particles via Solid-State Route Reaction PVP-Assisted Sb-Doped SnO2 Nanofibers Synthesized by Electrospinning Process Removal of Cu2+ from Aqueous Solutions by Magnetic Nanoparticles-Pomelo Peel Composite Synthesis and Characterization of MgO by Microwave-Assisted Thermal Oxidation for Dye-Sensitized Solar Cells Fabrication and Ethanol Sensing Characterization of Tin Oxide Nanorods Prepared by Glancing Angle Deposition Technique Vertical Alignment TiO2 Nanotube Based on Ti Film Prepared via Anodization Technique Investigating Power Factor of CaMnO3 Added Carbon Nanotubes Chapter 3: Coating and Thin Film Acid Surface Treatment of Sol-Gel Derived ZnO Thin Films for Anti-Reflection Coating Application Effect of Ti Sputtering Current on Structure of TiCrN Thin Films Prepared by Reactive DC Magnetron Co-Sputtering Fabrication and Characterization of Antibacterial Tantalum Oxide Thin Films Deposited by Reactive Magnetron Sputtering Photocatalytic Antibacterial Activity of TiO2 Thin Films by Spray Pyrolysis Technique Physical Properties of Copper Films Deposited by Compact-Size Magnetron Sputtering Source with Changing Magnetic Field Strength Spectroscopic Ellipsometry Analyses on Plasma Treatment of Aluminium Oxide Thin Film A Study and Characterization of Photophysical Properties of Fluorene Derivative Thin Film Additive SnO2-ZnO Composite Films for Photocatalytic Degradation Efficiency of Organic Dye Characterization of Cellulose/Calcium Carbonate Biocomposite Film Comparation Trace Element and Structural of Filler Materials in Chitosan Films Deposition of Transparent Niobium Oxide Thin Film by DC Reactive Magnetron Sputtering Effect of Annealing Temperature on Electrochromic Properties of Tantalum Oxide Thin Films Deposited by DC Reactive Magnetron Effect of Annealing Temperature on NiO/ZnO Heterojunction Thin Films Prepared by Sol-Gel Method Effect of Annealing Temperature on Structural and Optical Properties of Cobalt Oxide Thin Films Prepared by Electrostatic Spray Deposition Technique Effect of Oxygen Flow Rate and Post Annealing on Vanadium Oxide Thin Films Prepared by DC Pulse Magnetron Sputtering Effect of ZnO Seed Layer with Various Concentrations of Precursor on the Growth of ZnO Nanostructures Influence of Ni Doping on Structural, Morphological and Optical Properties of Sol-Gel ZnO Thin Films Influence of Post-Deposition Annealing on Structure and Optical Characteristics of Niobium Oxide Thin Films Influence of Rapid Thermal Annealing on Structural, Optical and Electrical Properties of ITO Thin Films Investigation of Structural and Thermoelectric Properties of Lead Telluride Thin Films Deposited by DC Magnetron Sputtering Power Factor of Germanium Antimony Tellurium Thin Film on Al2O3 Ceramic Substrate Deposited by Pulsed–DC Magnetron Sputtering Supercapacitive Properties of Cobalt Oxide Thin Films Prepared by Electrostatic Spray Deposition Technique at Different Substrate Temperature The Coated Paper with Silver Nanoparticles and its Antibacterial Activity Carbon Nanotube/Manganese Oxide Thin Film Composites-Based Counter Electrode for Dye-Sensitized Solar Cell Electrodeposition of Manganese Oxide Nanosheets as Supercapacitor Electrode Materials Highly Sensitive H2 Sensors Based on Pd- and PdO-Decorated TiO2 Thin Films at Low-Temperature Operation Influence of Substrate Temperature on Deposition Rate and Optical Properties of Aluminum Oxide Thin Films Prepared by Reactive DC Sputtering Technique Growth of Nanostructure Silver Films by DC Magnetron Sputtering for Surface Enhanced Raman Scattering Substrate Growth of Nanostructure TiO2 Films by Glancing Angle Deposition Investigated Microstructure of Al2O3/13wt%MgO Nanocomposite Coating Prepared by Plasma-Sprayed Technique Chapter 4: Superconductors Characterizations of YBa5Cu6Ox Superconductor Synthesized by Melt Process The Comparative Study of Y123 and Y13-20-33 Superconductors Synthesized by Melt Process Fabrication of the New Y257 Bulk Superconductor by Melt Process Chapter 5: Glass Materials Effect of Bismuth Glass Filling Treatment on Physical Properties of Natural Ruby Effect of CoO Addition on the Optical and Physical Properties of Silicoborate Glasses Effect of Li2O and Na2O on Optical Properties of Bismuth Borate Glasses Effect of Mixed Mn-Co Ions in Soda Lime Silicate Glasses Effective Atomic Numbers and Electron Densities of BaO-Na2O-B2O3-SiO2 Glass System: Theoretical Calculation Effects of BST on Optical and Dielectric Properties of Na2O-B2O3-SiO2 Glasses Fabrication and Properties of Soda-Lime Borate Glass Doped with Fe2O3 Influence of NiO on Physical and Optical Properties of Zinc Bismuth Borate Glasses Investigation some Properties of Bismuth Borate Glasses Containing Al2O3 Luminescence Properties of Er3+ Ions in Bismuth Borophosphate Glasses Luminescence Properties of Nd3+ Ions Doped in CaO-Y2O3-SiO2-B2O3 Glasses Optical and Luminescence Properties of Pr3+ in Gd2O3-CaO-SiO2-B2O3 Glasses Optical, Luminescence and Judd-Oflet Study of Eu3+ Doped Lithium Yttrium Borate Glasses for Using as Laser Gain Medium Photoluminescence Properties of CaO-BaO-P2O5 Glass Systems Doped with Sm3+ Physical, Optical and Luminescence Properties of Er3+-Doped Bismuth Borosilicate Glasses Preparation and Properties of La2O3-CaO-P2O5 Glasses Doped with Eu3+ Ions Properties and Investigation on Effect of Eu3+ Ions in Lithium Barium Borate Glasses Spectral Investigations of Dy3+-Doped Gd2O3-CaO-P2O5 Glasses Spectroscopic Properties and Judd-Ofelt Analysis of Dy3+ in Lithium Lanthanum Borate Glass for Laser Medium Application Spectroscopic Properties of Ho3+ Doped in B2O3-SiO2-SrO-Bi2O3-TiO2 Glasses Study of the Structures and Physical Properties of Calcium Borophosphate Glass Containing Transition Metal Oxides The Improvement of Bismuth Barium Borate Glasses through the Applications of Sm3+ Dopant Visible Luminescence Properties of Sm3+ Doped Magnesium Bismuth Phosphate Glasses White Light Emission from Dy3+ Doped Zinc Bismuth Borate and Bismuth Borate Glasses: A Comparative Study Luminescence Characteristics of Li2O3:Gd2O3:B2O3:Dy2O3 Glasses System Spectroscopic Investigation and Optical Properties of Eu3+-Doped Fluorophosphate Glasses Structural and Optical Properties of Nd3+ Doped Na2O-PbO-ZnO-Li2O-B2O3 Glasses System Development of Al2O3-Bi2O3-B2O3 Glasses for Neutron Shielding Material Luminescence and Scintillation Response of Ce3+-Doped Oxide Glasses with High Gd2O3 Content Mass Attenuation Coefficients and Partial Interactions of BaO-ZnO-B2O3 Glasses System Photon Interactions Study of Bi2O3-Na2O-CaO-SiO2-B2O3 Glasses Theoretical Investigation on Radiation Properties of Calcium-Silico-Borate Glasses Doped with Varying Lu2O3 Concentration Chapter 6: Materials Science and Applications Application of Chitosan Film for the Removal of Triclosan from Aqueous Solutions by Adsorption Characteristic of Pore Structure and Cells Growth on the Various Ratio of Silk Fibroin and Hydroxyapatite in Chitosan Base Scaffold Characterization and Analyzation of Chitosan from Anadara granosa Shell Characterization and Spectral Selectivity of Sn-Al2O3 Solar Absorber Characterization of Gelatin Composite with Low Content Hydroxyapatite and the Influence on Mesenchymal Stem Cell Culture Characterization of Ni-Al Solar Absorber Prepared by Flame Spray Technique Characterization the Raw Material of Filler in Cellulose Film Cobalt-Doped ZnO Powders by a Simple Solid-State Method Cordierite Composites Using New Source of Waste; Sludge Cake from Cosmetic Industry in Thailand Detection of Magnetic Material in Soil Subsurface Using Electromagnetic Induction Method Based on Fluxgate Sensor Dielectric and Mechanical Properties of Mullite/Modified BaTiO3 Composites Dyeing Properties and Color Fastness of Cotton Fabrics Dyed with Uncaria Gambir Extract by the Padding Techniques Effect of BCZT Dopant on Ferroelectric Properties of PZT Ceramics Effect of Cooling Rate on the Microstructure and Mechanical Properties of Sn-0.7wt.%Cu Solder Alloy Effect of Silver Addition on the New Y3Ba8Cu11Ox Superconductors Effect of Sintering Condition on Electrical Properties of PLZT Ceramics Effect of Sintering Temperature on Electrical Properties of SFN Ceramics Doped with Al Prepared by a Solid-State Reaction Technique Effect of Slurry Formulation on Morphology and Flowability of Spray-Dried Alumina/Zirconia Composite Particles Effect of Zn:Al Ratio and Calcination Time on Structural Properties of Zn-Al-O Compound Effect of Zn:Sn Ratio and Calcination Temperature on Phase Transformation of Zn-Sn-O Compound Effects of Dwell Time Sintering on Microstructure, Piezoelectric and Mechanical Properties of Modified BNT-Based Ceramics Effects of Electrode on Dielectric Properties of Barium Iron Niobate Ceramics Doped with Gallium Oxide Effects of Ga Content on Optical and Scintillation Properties in Ce3+-Doped YGd2(Al,Ga)5O12 Scintillators Electroless Plating of Pd on Macro-Porous Alumina Support for H2 Purification Enhancement for Photocatalytic Activity of TiO2 Combined with Activated Carbon under Surface Fluorination (F-TiO2/AC) Enhancing Properties of Deproteinized Natural Rubber with Rice Husk Ash Silica for Use as a Dental Material Experimental and Theoretical Study of Heat Transport Parameters of Plasters Containing Pozzolanic Admixtures Growth and Characterization of Ammonium Dihydrogen Phosphate (ADP) Doped with H3BO3 Crystals Grown by Slow Evaporation Method KOH Treatment of Photoanode on Photovoltaic Properties of ZnO Based Dye-Sensitized Solar Cell Oxidation Behavior of 30wt.%Cr-3.75wt.%V High Chromium Cast Iron Performance of Light Green Pigment for Near-Infrared Reflection Phase Formation, Microstructures and Mechanical Properties of Lead-Free BNKT Ferroelectric Ceramics Doped with BZZ Photocatalytic Performance of Ball-Milled Anatase/Rutile Mixed Phase TiO2 Composite Powders Pore System and Hydric Properties of Two Different Lime Plasters with Finely Crushed Brick Possibility of Thermoelectric Oxide for Thermal Sensors Preparation and Electrical Behaviour of BaCeO3 Ceramics Preparation of Spherical Rice Husk Zeolite NaY Granules for Adsorption of Cu2+ Properties and Phase Shift Structure of (1-x)BT-(x)BNT Ceramics Reducing Property of Bread Crust Extract Self-Propagating High-Temperature Synthesis of Si-SiC Composite Powder Structure Properties Relationship of Pb0.92La0.08(Zr0.4Ti0.6)0.98O3 Ceramics Study of the Sorption of Cu(II) from Aqueous Solution Using Amusium pleuronectes Shell Synthesis and Dielectric Properties of [(K0.5Na0.5)0.935Li0.065]NbO3 Added with Mn for Piezoelectric Ceramic TEM Analysis of Planar Defects in InGaAsN and GaAs Grown on Ge (001) by MOVPE Temperature Dependence of Electric Field Induced Strain in PLZT 9/65/35 Ceramics The Effect of Particle Size Ratio on Porosity of a Particles Deposition Process The Effects of Sintering Temperature on the Dielectric Properties of Sr(FeNb)0.5O3 Doped with Ba(Zr0.25Ti0.75)O3 The Influence of Electron Beam Treatment on Al-Si Alloy Structure Destroyed at High-Cycle Fatigue The Modification of β-Al5FeSi Phase in Al-Si-Mg-Fe Alloys by Utilizing Recycled Beverage Can Body in Casting Process The Study of the Removal of Cu(II) from Aqueous Solution by Papia undulates Shell The Various Concentration Effected on Crystallite Size of Calcium Carbonate The Voltammetric Study of β–Glucosidase Hydrolytic Product with Modified Electrode Thermal Expansion of Aluminate Cement-Based Composite Containing Basalt Fibres with Different Length Thermoelectric Properties and Power Generation of p–Ca3Co4O9 and n–Sr0.87La0.13TiO3 Thermoelectric Modules Ultrasonic Assisted Enhancement in Cotton Dyeing with Natural Colorants Extracted from Excoecaria Bicolor Propagation of Massless Spin-1 Particle between Two Media Numerical Analysis of Constrained Failure Area Effect on Tensile Capacity of Fastening for Concrete Structures Green Approach for the Reduction of Graphene Oxide by Thai Shallot Neutron Activation for Analyzing Elements in Material Inner Filter Effect on Fluorescence Dyes Spectra in Methanol Solution Study of Stress Distribution in Homogeneous Plastic by Photoelastic Analysis System Synthesis and Characterization of Red Emitting Eu3+-Doped YBO3 Phosphor The Measurement of Erythrocyte Size by Using Diffraction Technique Base on Laser Development of Experimental Set for Determination of Refractive Index of Liquid Using Optical Fiber Energy Distributions of 662 keV Multiply Compton-Scattered Photons in Copper Theoretical Study of the Photon Interaction for Zirconium Alloy at 1 keV to 100 MeV The Study of Decrement in Insulation Resistance of PV String and its Effects on PV System Degradation Mechanical Properties Study of Plasma Treated Epoxy-Base Post in Dual-Material Systems Effect of Atmospheric Pressure Argon Plasma Jet on the Growth of Bread Molds Identification of Thermo-Mechanical Parameters of Concrete Samples from Nuclear Plant Comparative Studies of Commercial Window with Standard Shielding Concretes on the Basis of Photon Interaction Parameters Comparative Studies of CsI(Tl), LYSO and BGO Scintillators Interaction of 662 keV Gamma Rays with LYSO(Ce) and BGO Single Crystal Scintillators Intrinsic Light Yield and Light Loss Coefficient of LuAG: Pr under Excitation with α- and γ-Rays Luminescence and Scintillation Characteristics of Gd2SiO5: Ce Single Crystal Scintillator


Best Sellers


Product Details
  • ISBN-13: 9783035701678
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 675-676 Key Engineering Materials
  • ISBN-10: 3035701679
  • Publisher Date: 25 Jan 2016
  • Binding: Digital download and online
  • No of Pages: 808


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Applied Physics and Material Applications II: (Volumes 675-676 Key Engineering Materials)
Trans Tech Publications Ltd -
Applied Physics and Material Applications II: (Volumes 675-676 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Applied Physics and Material Applications II: (Volumes 675-676 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!