Buy Manufacturing Science and Technology VI - Bookswagon
close menu
Bookswagon
search
My Account
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Manufacturing Science and Technology VI: (Volumes 789-790 Applied Mechanics and Materials)
Manufacturing Science and Technology VI: (Volumes 789-790 Applied Mechanics and Materials)

Manufacturing Science and Technology VI: (Volumes 789-790 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 2015 6th International Conference on Manufacturing Science and Technology (ICMST 2015), June 1-2, 2015, Bandar Seri Begawan, Brunei. The 224 papers are grouped as follows: Chapter 1: Materials and Technologies of Processing; Chapter 2: Researching and Designing of Machines and Mechanisms; Chapter 3: Applied Thermodynamics and Heat Transfer; Chapter 4: Instrumentation and Measurement Technologies, Monitoring and Fault Detection; Chapter 5: Designing and Development of Robots; Chapter 6: Mechatronics; Chapter 7: Theory and Practice of Control; Chapter 8: Civil Engineering; Chapter 9: Product Design, Product Quality and Rapid Prototyping; Chapter 10: Industrial Engineering

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Materials and Technologies of Processing Finite Element Modeling of Frictional and Material Anisotropy During Forming of Steel Cylindrical Cups Investigating the Degradation Resistance Improvement of Polymer Surfactant Complex Drag Reducing Agent Microstructure and Fatigue Fracture of Spot Welded TRIP800 Steel An Investigation of Machining Time and Surface Roughness in Wire-EDM for Inconel 800 Modified Stoney's Equation for Evaluation of Residual Stresses on Thin Film Optical Methods for Studying the Drying Dynamics of Fe2O3 Nanocolloid Droplets Depending on Variation of Substrate Temperature Experimental Study of Splitting Tensile Strength of Polymer Resin Grout with Fly Ash Synthesis and Characterization of La10Si6O27 and Ce0.9Gd0.1O1.95 Solid Oxide Fuel Cell Electrolyte Material Synthesis and Investigation of the Structural Properties of Al3+ Doped Mg Ferrites YSr2Fe3-xCoxO8 as a Potential Cathode Materials for SOFCs DFT/TD-DFT Studies on the Lawsone (Henna) as a Photosensitizer for Dye-Sensitized Solar Cells Solder Ball Robustness Comparison between SAC 387 and Polymer Solder Balls under AC and TC Reliability Test Effect of Microwave Absorber towards Pyrolysis Yield of Automotive Paint Sludge Effect of Treating Time on Mechanical Properties and Structure of Aramid Fibers during Heat Drawing The Effects of Melt Compounding Method on the Ambient and In Vitro Mechanical Properties of EVA/MMT Nanocomposites Usage of Nano Silica in Synthetic Based Mud: A Comparison Study for High Temperature High Pressure Well Processing Temperature of Sustainable Polymer with Thermoplastics by Injection Molding (Part 2) Optical Properties of Cu2ZnSnSe4 Nanocrystalline Thin Films for Photovoltaic Devices Effect of Cr on Grain Refinement and Mechanical Properties of Al-Si-Mg Alloys Optimization of Multi-Performance Characteristics for a Hybrid Process of EDM and AJM Using Grey Relational Analysis Machining Parameters Optimization for Trimming Operation in a Milling Machine Using Two Level Factorial Design Application of Taguchi Method Machining to CuA1 Study on the Spring-Back Effect with Stress Distribution According to Forming Sheet Width in the Roll Forming Process Hard Spots in ADC12 Die Casting Cylinder Block Used for Air Compressor The Impact of Employing Different Quality PA2200 Powder Grades to Shrinkage on Sintered Part in Selective Laser Sintering Process Study of Interfacial Shear of Aluminium/Oil Palm Empty Fruit Bunch Fiber Reinforced Polypropylene Fiber Metal Laminates A Review on Ultrasonic Welding Capability: Breakaway from Traditional Plastic Experimental Investigation to Improve Surface Integrity of Biomedical Devices by End-Milling AISI 316L Stainless Steel Review on Effect of Repetitive Rework on Dissimilar Austenistic Stainless Steel Pipes by Using GMAW Orbital Welding Surface Integrity in Micromilling of Hardened AISI D2 Tool Steel Research of Elliptic Ultrasonic Vibration Mechanism A Study on Dynamic Recrystallization Kinetics Model of 45Cr4NiMoV Preheater for Anthracite Carbonization in Rotary Furnaces Raman Analysis of Vanadyl Phthalocynine Layers for Plastic Electronic Applications Chapter 2: Researching and Designing of Machines and Mechanisms A Study with Diesel Additives and Fish Methyl Ester on Diesel Engine at Full Load Condition Stratified Flow Condensation of CO2 in a Tube at Low Temperatures Solar Powered Water Pump Lifting Agriculture Analysis of the Inherent Frequency of Circular Vibrating Screen and Modelling and Simulation of Matlab/Simulink The Design of the Nozzle for the Nozzle Box Microturbines Topology Optimization of Wing Structure with Manufacturing Constraints Design of Machine Tool Based on Reconfigurability Principles Dynamic Analysis for Rotors of a Twin-Screw Compressor with Gas-Induced Cyclic Loads Virtual Prototype Simulation and Transmission Error Analysis for RV Reducer Study of the Influence of Labyrinth Seal Clearance on Gearbox Leakage with Gas-Fluid Two-Phase Mixture Fatigue Finite Element Analysis of Certain Type of EMU Gearbox Box Analysis of the Stability of Elliptical Journal Bearings under Vapor Cavitation Erosion Sealing Performance of Thin Corrugated Metal Gasket Improvement in CAM Shaft Design: An Experimental Application and Recommendation Numerical Study of Fluid Behavior Induced by Anchor Impeller in a Stirred Vessel Thermal Error Prediction of the Spindle Using Adaptive Neuro-Fuzzy Inference System Efficiency Estimation of Thermoelectric Generators Application in the Liquefied Natural Gas Gasifiers Research on Inspection Feature Recognition Based on Pro/E 3D Analysis of Crack Behavior Using XFEM A Numerical Investigation of Laminar Mixed Convection Flow and Heat Transfer in a Lid Driven Cavity with Two Cylinders Numerical Simulation of Radiation Losses in a Decaying Laser Spark Using LBL Method The Impact of Different Axial Oil Chamber Design on Hydrostatic Spindle Study on the Structure Parameters Simulation and Optimization for Stamping Quality of Plate Heat Exchanger Optimal Cantilever Design by Topology and Shape Optimization Methods Simulation Analysis of Planetary Gears Train of Semi-Direct Drive Wind Turbine Based on ADAMS Numerical Study for Shape Oscillation of Free Viscoelastic Drop Using the Arbitrary Lagrangian-Eulerian Method Analysis and Optimization of Erosion Wear Tester Design Parameters Third Order ENO Scheme on Non-Uniform Grid for Supersonic Flows The Effect of Mass Flow Distribution Inaccuracies in a Hydraulic Network Model for OD Zig-Zag Cooled Power Transformer Windings Reliability of a Hydrodynamic Journal Bearing A Supervisory Power Flow Controller for a Hybrid Power System Study on the Dimensionless Model of High-Speed Penetration Efficiency Numerical Investigation of Cavity Flow Field Characteristics in Supersonic Flow Burners for Rotary Furnace - Proposal and Comparison Innovative Design and Manufacturing Technology of High Temperature Air Combustion (HTAC) Municipal Solid Waste Incinerator Failure Analysis of Composite Thin Walled Multi-Cell Closed Cross Section Beams with Multi-Tapered Configuration Chapter 3: Applied Thermodynamics and Heat Transfer Thermal Analysis of a Solar Powered ORC in Libya Study of the Mixed Convection in a Horizontal Channel Heated from below Natural Convection in an Annular Porous Medium: Effect of Brinkman Correction on the Bifurcation Point Method of Heat Balances for Calculating Heat Transfer in Flat Multilayer Nanostructures Simulation Research on the Hydraulic and Thermal Operation for Complex District Heating System Field Evaluation of Five-Level Heat Dissipation Models under PV Array Structure Installed in the Tropics Circulation Effectiveness of Working Fluid in Inclined Micro Heat Pipes Numerical Procedure for LMTD Correction Factor Calculation for One Tube and One Shell Pass Shell-and-Tube Heat Exchangers ANSYS Analysis on Thermal Structure of Bionic Brake Discs Development of a Plasma-Dump Combustor for VOC Destruction A Differential Quadrature Method for Solving Multi-Dimensional Inverse Heat Conduction Problem The Nonlinear Multi-Fuel Combustion Equation: Comparison between the Model of Heat in SIE for Ethanol-Gasoline Blended and High Order Iteration Method Numerical Determination of the LMTD Correction Factor for Shell-and-Tube 1-2 Heat Exchangers Natural Convection for Air and Molten Gallium in Square- and Elbow-Shaped Enclosures The Simulation of Molecular Return Flux in Thermal Vacuum Test of Spacecraft Significant of Isothermal Flow Studies for High Swirling Flow in Unconfined Burner Numerical Simulation of Turbulent Thermal Fluid in Tee Water Duct Cooled Nuclear Reactor Experimental Analysis of the Pool Boiling Phenomenon of Sugarcane Juice Cooling Profile Analysis of Hot Strip Coil Using Finite Volume Method Application of PTFE Heat Exchanger in Low Temperature Waste Heat of Big Coal-Fired Power Plants Chapter 4: Instrumentation and Measurement Technologies, Monitoring and Fault Detection A W-Band Dual-Mode Band-Pass Filter Based on LTCC Technology A Millimeter-Wave SIW Gain Equalizer Using LTCC Technology Dew Point Measurement Error due to Tube Length in a Calibration Instrumentation and the Evaluation of Measurement Uncertainty A Neural Based Fuzzy Logic Model to Determine Corrosion Rate for Carbon Steel Subject to Corrosion under Insulation Research on Automatic Programming and Process Diagnosis in On-Machine Measurement New Test System of Infrared Earth Sensor Experimental Measurements of Pressure Losses in the Inter-Turbine Duct of a Gas Turbine Using Infrared Thermograph of Chip Temperature to Monitor Cutting Edge Performance Chemiresistor Gas Sensor Array Based on Conducting Polymers for the Discrimination of Virgin Coconut Oil Sea Bed Logging Applications: Predicting Hydrocarbon Depth Using Mathematical Equations Coal-Rock Character Recognition in Fully Mechanized Caving Faces Based on Acoustic Pressure Data Time Domain Analysis Modeling and Analysis of a Novel Flexible Capacitive-Based Tactile Sensor Smart Diagnosis Using an On-Board Middleware An Equivalent Condition Score Method for the Calculation of the Failure Rate for Power Transmission Equipment with Condition Maintenance Fault Detection and Diagnosis in Gears Using Wavelet Analysis Techniques and Comparison on their Diagnostic Capability Solving the Issue of Electronic Breakdown of Hobbing Machine through Kobetsu Kaizen Methodology: A Case Study Intelligent Diagnostic of Induction Machine for Faults Detection and Classification Using Wavelet and Fuzzy Inference Control Valve Fault Detection Based on Acoustic Emission Signal Verification of Faulty Mechanism for Fan-Out Wafer Level Package Using Numerical Analysis Chapter 5: Designing and Development of Robots Model Predictive Control for Tendon-Driven Balloon Actuator under Constraints on Simulation Investigation of the Influence of the Wings and Tail in Flight of the Jumping Robot Development and Validation of the Kinematic Analysis of a Low Low-Cost 4-Link Robot Simulation and Determination of the Influence of the Gait Function on the Change of the Shape of a Snake-Like Robot A New Method to Solve the Kinematic Problem of Parallel Robots Using an Equivalent Structure A Low Cost Robotic Wheelchair System Using a Pan-Tilt Camera and a Visual Marker A Novel Dual-Loop Control Scheme for Payload Anti-Swing and Trolley Position of Industrial Robotic 3DOF Crane Mechanical Analysis of a Hybrid Approach for a Lower Limb Rehabilitation Robot A Framework of In Situ Model Error Compensation for Adaptive Robotic Task Execution Hardware-in-the-Loop Test Platform Design for UAV Applications The Motion Planning for Spherical Robot with Two Motors Intelligent Control System Design for a Teleoperated Endoscopic Surgical Robot Mathematical Model Based Attitude Control of Inverted Pendulum Type Mobile Robot Design Guidelines for an Embedded Permanent Magnetic Matrix Wheel Climbing Robot Increase the Space Trajectory Precision by Using the Proper Assisted Research Method for Inverse Kinematics Problem KSU-IMR Mobile Robot Navigation Maps Building and Learning Dynamic Optimization of a Three Translational Degrees of Freedom Parallel Robot Based on a Multi-Objective Genetic Algorithm Modeling and Control of a Robot Arm on a Two Wheeled Moving Platform Mars-500 Program Space-Based Mobile Robot “Turist” Modelling of the Human's Leg as a Switched Linear System The Design of a Multifunctional Remote-Control Intelligent Vehicle Based on STC89C52 Synthesis of Seven-Bar Linkage with Two DOF for Body Guidance Simulation-Based Analysis of a Linear Switched System Based on Human Arm’s Dynamics A Clustering and Outlier Detection Scheme for Robust Parametric Model Estimation for Plane Fitting Chapter 6: Mechatronics Cooling Performance Analysis of the Permanent Magnet Motor Design on Electric Vehicle Battery Management System with FlexRay Bus The Impact of Different Direct-Driving Motor Design on Swivel Spindle Head Stability Control of Electric Vehicles with Two-Motor-Wheel Drive A Unifying Model for Mechatronic Systems Specification Investigation of Relation between Straightness and Cutting Force in CNC Turning Process A Systematic Approach for Modeling and Analyzing Mechanical Assemblies that Require Remote Handling Instruction Format Design for Low Power Embedded Systems Data Cluster Detection for Low Power Embedded Memory Subsystems Stress-Strain Behaviour of Dielectric Elastomer for Actuators Fractional Order Modeling and Analysis of Buck-Boost Converter The Turning Speed of Stability Control in Electric Learner-Driven Vehicle Driving Innovative Algorithm and Software for Three-Dimension Topography Evaluation in Laser-Micro Machining Finite Element Analysis on Vibration of a Piezoelectric Micro Pump Simulation of Closed Loop Electro-Hydraulic Actuator Using PID Based on AMESim Automatic Recognition of Multi-Axis Machining Features Based on Machining Process from 3D Solid Model Control Strategy and Deterministic Optimization Research for Parallel Compound Braking System Extended Modeling of Vertical Axis Motion Dynamics of VTOL Vehicle Kinematics Optimization of a 3-SPS Parallel Redundant Motion Mechanism Using Conformal Geometric Algebra Design of Transfer Alignment for Micro-Inertial Attitude Measurement System Based on Distributed A Study on Influence of System Parameters on Servo Pneumatic System and Multi-Response Optimization Using Taguchi – Grey Methodology A Study on Slip Controller for Safety Improvement of Running Flat Road for Motorized Wheelchair Ground Semi Active Damping Force Estimator (gSADE) for Magnetorheological Damper Suspension System Using Quarter Heavy Vehicle Model Optimal State Feedback Controller Design for Vibration Attenuation in a Class of Image Transfer Belt Proportional Derivative Controller Using Discrete Kalman Filter Estimation Method for Spacecraft Attitude Control Skid Control of Small Electric Vehicles with In-Wheel Motors (Effect of ABS and Regenerative Brake Timing Control on Emergency Braking) Predictive Functional Control for a Pneumatic Cylinder Development and Implementation of an Automated Car Parking System Adaptive Fuzzy Sliding-Mode Position Control of a Shape Memory Alloy Actuated System Estimation of Unknown Disturbances in Gimbal Systems Tire Force Control Strategy for Semi Active Magnetorheological Damper Suspension System Using Quarter Heavy Vehicle Model Sensorless Control Based on Virtual Neutral Voltage for BLDC Motor Drive Vibration Control of Strain Gradient Nonlinear Micro-Cantilevers Using Piezoelectric Actuators Independent Control of Force & Displacement Using Shape Memory Alloy Tactile Display Computational Simulation and Experimental Validation on Safe-Flight Control for a Six-Rotor Craft A Grating Monopole Antenna on Metamaterial Using MSRR for DVB-T Application Chapter 7: Theory and Practice of Control Predictive Functional Control of a Table Drive System Using Disturbance Observer and Preview Feedforward Controller A New Variable Structure Control Scheme for Mismatched Uncertain Large Scale Systems Reactive Power Control of Reversible Electric Drives by Using Industrial Smart Grid Technology Development of an Experimental Setup for the Altitude Control of a Ball in a Pipe Adaptive Optimal Digital PID Controller On the Reducibility of the Discrete Linear Time-Varying Systems Prescheduled Controller for Split Unit Air Conditioner Reduce Energy Consumption Optimisation of a PID Controller for an Inverted Pendulum Using the Bees Algorithm Trajectory Controllability of Semilinear Systems with Delay in Control and State Properties of the Lower Bohl Exponents of Diagonal Discrete Linear Time-Varying Systems Providing Security of Vital Data for Conventional Microcontroller Applications An Affine Parameter Dependent Controller of an Helicopter for Various Forward Velocity Conditions A Systematic Approach for Optimal Design of SVC Controller to Reduce the Disturbances in Electric Arc Furnace Using Generic Algorithm The Dipole Magnets Temperature Monitoring and Interlocking Protection System of HIRFL-CSRm Development of a Cloud Based Remote Mobile Monitoring and Control System for Manufacturing Analysis and Initialization of GE Wind Turbine Control Model On PID-Controller Parameters Neural Tuner Usage for Nonlinear Plants Control Chapter 8: Civil Engineering Fabrication of High Strength Concrete from Recycled Concrete Aggregate Utilizing Taguchi Method Investigation of Wind around Buildings of Different Heights Using an Environmental Wind Tunnel Identifying Radius of Rebar Buried in Concrete Massif by Using Electromagnetic Penetrating Radar Evaluation of the Use of a Solar Source for Air Conditioning for Home in Algeria Numerical Modeling of Wind around Buildings of Different Heights Grouted Pipe with Double Spirals for Precast Concrete Connections Seismic Performance Improvement of 3D Reinforced Concrete Frames with Different Strengthening Applications Sustainable Manufacturing Processes of Building Materials: Energy Efficiency Heating or Cooling Buildings with PV Walls in Reunion Island Influence of Very Old Masonry in the Seismic Damage of an Historic Tower The Study of the Multichannel Solar Chimney Ventilation Performance Effects of Wetting on the Soil Fabric of Compacted Clay Fiber Reinforced Composite Materials in Architecture Performance of Grouted Splice Sleeves with Tapered Bars under Axial Tension The Statistical Verification of Significance of Airtightness and Energy Performance Chapter 9: Product Design, Product Quality and Rapid Prototyping Applying P-Diagram in Product Development Process: An Approach towards Design for Six Sigma Evaluation of Product Quality Using Standardized Distance from Target Using the Fuzzy-QFD for Product Development: A Case Study for 3D Printer Design of Experiment – An Integration of Fisher, Taguchi and Shainin DOE Methodology Rapid Prototyping Technology: The Next Keystone for Small and Medium Ceramic Industry A Roll Powder Sintering Additive Manufacturing Technology The Manufacture of Molar and Dental Bridge through 3D Printing Image Processing of Product Surface Defect Using Scilab Chapter 10: Industrial Engineering Genetic Modelling for Selecting Optimal Machine Configurations in Reconfigurable Manufacturing System A Productivity Improvement of a Packing Line Modeling of Order Oriented Planning for Printed Circuit Board Assembly Line Re-Layout and Robust Machine Layout Design under Stochastic Demand Construction of a Cloud Manufacturing Platform for Service Sharing in Manufacturing Industry Park Improving Quality Control Plan of Flexible Printed Circuit An Optimization of Automated Process Planning for Manufacturing Prismatic Parts on a Machining Center Virtual Reality for Manufacturing Engineering in the Factories of the Future An Application of Value Stream Mapping in Ceramic Tile Industry: A Case Study The Effect of Unforeseen Disruption on Different Types of Manufacturing Industry-Layout A Heuristic Approach for Type 2 Assembly Line Balancing Problem Study Concerning the Increase of Productivity in Machining by Lapping A Unified Measure to Assess Universally Industrial Products for Ecological Balancing Modeling the Collaborative Design of the Automotive Powertrain System Based on the Design Structure Matrix New Methods of Mining Technological System’s Performance Analysis


Best Sellers


Product Details
  • ISBN-13: 9783035700145
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 789-790 Applied Mechanics and Materials
  • ISBN-10: 3035700141
  • Publisher Date: 02 Sep 2015
  • Binding: Digital download and online
  • No of Pages: 1376


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Manufacturing Science and Technology VI: (Volumes 789-790 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Manufacturing Science and Technology VI: (Volumes 789-790 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Manufacturing Science and Technology VI: (Volumes 789-790 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!