About the Book
This book presents novel techniques, current trends, and cutting-edge technologies in energy and biochemical processes. The authors explore recent advances that solve challenges related to the implications and commercialization of these processes by introducing new techniques or modifying existing technologies to meet future demands for food materials, bioproducts, fossil fuels, biofuels, and bioenergy. Divided into three parts, the first section of the book addresses issues related to the utilization and management of energy towards the efficient characterization and conversion of wastes or raw-/bio- materials to useful products. The second section focuses largely on studies on molecular detection of analytes, purification, and characterization of products recovered from biochemical, enzymatic, food, and phytochemicals, as well as biostimulation and bioaugmentation processes. The final section discusses areas related to heat and mass transfer, fuel processing technologies, nanofluids, and their applications.
Table of Contents:
Section A: Energy Utilization, Conversion, and Management.- Effective Moisture Diffusivity and Mathematical Modeling of the Drying Process for Cassava Stalk Biomass.- Production and Characterization of Biochars Produced From the Co-carbonization of Corn Husk and Low-density Polyethylene Wastes.- Structural and Optical Characterization of Cu2ZnSnS4 Solar Absorber Layer for Photovoltaic Application Using SILAR Method.- Daily and Cumulative Biogas Yield From Selected Animal Dungs.- Sol-gel Synthesized Core-shell 0.5Li2MnO3·0.5LiNi0.5Mn0.3Co0.2O2 Material: Effect of Mixed Fuel (Citric Acid and Ammonium Acetate) on the Structural Properties.- Section B: Microbial and Enzymatic Processes.- Purification and Characterization of Phytase Produced by Indigenously Isolated Aspergillus Flavus MT899182 Using Submerged Fermentation.- Optimization of Soursop Juice Recovery by Alpha AmylaseProduced by Aspergillus Niger Using Statistical Tool.- Molecular Detection of ESBLs, TEM, SHV, and CTX-M in Clinical Pseudomonas Aeruginosa Isolates in Ogun State.- Pectinase Production and Application in the Last Decade: A Systemic Review.- Biogas Production From Thermo–alkaline Pretreated Corn Stover Co-digested With Rumen Content.- Assessing the Safety of Tiger Nut Drinks Produced From Cyperus Esculentus L Seeds Sold in Ota.- Purification and Characterization of Phytase From a Local Poultry Isolate of Aspergillus Flavus MT899184.- Trends in Downstream Processing Approaches, Laccase Mediator Systems, and Biotechnological Applications of Laccases.- Atherosclerosis and Scientific Interventions: A Review.- Comparison of Pectinase Activity in the Flavedo and Albedo of Citrus and Thaumatococcus Danielli Fruits.- Production of Rhamnolipid Biosurfactant From Waste Cooking Oil Using Pseudomonas Putida in a Batch Reactor.- Estimation Model for Cow Dung-aided Water Hyacinth Digestion Phytochemicals and Antimicrobial Properties of Neem (Azadirachta Indica) Seed Oil Extract.- Proximate Analyses of Watermelon and Pineapple Wastes as Substrates for Single Cell Protein Production.- Turbidity and Urine Turbidity: A Mini-review.- Antibiotic Resistance Status of Pseudomonas Aeruginosa in Clinical Isolates in Ogun State.- Section C: Fuel Technology and Drilling Operations.- Investigation of the Potentials of Southwest Nigerian Napier Grass as an Energy Source to Replace Fossils Used in Firing Thermal Power Plants for Air Emissions Control.- Necessity for Nanofluids in Refrigeration Systems: an Overview.- Synthetic Heat Transfer Fluids: Alternative to Steam in Chemical Industries – a Review.
About the Author :
Dr. Augustine O. Ayeni is an Associate Professor of chemical engineering at Covenant University, where he was the head of the Department of Chemical Engineering from 2018-2021. He has more than 16 years of university teaching and research experience in Nigeria, India, and South Africa. His research specialization and interests include biochemical engineering, environmental engineering, corrosion control, chemical kinetics and reaction engineering, bioresource engineering, energy/bioenergy engineering, and process optimization techniques. Dr. Ayeni is a Registered Engineer (R.Eng) with the Council of Regulation of Engineering in Nigeria and a member of the Nigerian Society of Engineers and the South African Institute of Chemical Engineers. He has contributed substantially to the advancement of chemical engineering and applied sciences through peer-review of over 90 publications including books, book chapters, journal articles, conference papers, and the supervision of undergraduate and postgraduate student research projects. He is the co-editor of the book Valorization of Biomass to Value-Added Commodities: Current Trends, Challenges, and Future Prospects (Springer, 2020). He is a frequent reviewer for many high-impact scientific journals and the National Research Foundation (NRF) of South Africa.
Dr. Samuel Eshorame Sanni is a Senior Lecturer in the Department of Chemical Engineering of Covenant University, where he is also an academic staff member and researcher. His areas of interest include chemical reaction engineering and kinetics, process engineering and intensification, multiphase transport, energy and fuels, corrosion technology, catalysis, nanotechnology, and waste valorization. Dr. Sanni has B. Tech, M.Sc, and Ph.D. degrees in chemical engineering from Ladoke Akintola University of Technology (LAUTECH), Ahmadu Bello University, and Covenant University, respectively. He is the author of 134journal and conference papers, has authored and co-authored several chapters in books published by Springer, Wiley Scrivener, Taylor & Francis, and Elsevier, and is the author of the book Modelling and Simulation of Sand Entrainment and Deposits in Horizontal Oil Transport (Scholars Press, 2016) He is a reviewer for several international journals and served as Lead Guest Editor of the special issue journal Innovative Carbon Capture Technologies for Sustainable Engineering and Environment (Hindawi, 2021). He is a Fellow of the Institute of Policy Management Development (FIPMD) and an active member of the International Association of Advanced Materials (IAAM), the Council for the Regulation of Engineering in Nigeria (COREN), the Nigerian Society of Engineers (MNSE), and the Nigerian Society of Chemical Engineers (MNSChe).
Prof. Solomon Oranusi is a Professor of Microbiology at Covenant University, where he was head ofthe Department of Biological Sciences from 2019-2022 and has also served as Sub-Dean of the School of Postgraduate Studies. Prof. Solomon holds a B.Sc degree in microbiology from the University of Nigeria Nsukka (UNN) and an M.Sc and Ph.D. in microbiology from Ahmadu Bello University (ABU) Zaria. He is a Fellow of the Institute of Medical Laboratory Science Council of Nigeria and a Public Analyst with MIPAN. His research interests include biogas and digestate bio-fertilizer production from food and agricultural wastes (waste-to-wealth), food safety, HACCP, and public and environmental health. Prof. Oranusi is a member of several academic and professional organizations including the Institute of Public Analysts of Nigeria (IPAN), the Association of Industrial Microbiologists of Nigeria (AIMN), the Nigerian Institute of Food Science and Technology (NIFST), the Institute of Medical Laboratory Sciences of Nigeria (IMLSN), and the American Society for Microbiology (ASM). He has published more than 130 peer-reviewed scientific articles and is a reviewer for several international journals. He has served as an examiner for postgraduate theses and dissertations and as an assessor for the promotion of applicants to the professorial cadre of academic institutions.
