About the Book
Manufacturing with plastics often involves a bonding step from packaging, electronic and medical devices to large scale automotive, aerospace and construction projects. This is a continually developing field and experts at this Second International Conference on Joining Plastics debated the best methods and options for different applications. Sponsored by The National Physical Laboratory, TWI Limited and Faraday Plastics this conference was an excellent opportunity for plastics manufacturers, design engineers and product developers to talk to experts in the field and discuss the latest developments in Joining Plastics.
Table of Contents:
SESSION 1. ADHESIVES Paper 1: Bonding Plastics? Stuck for a solution?
Dr Ewen Kellar, TWI Ltd., UK Paper 2: Joining of plastics by adhesive bonding in automotive engineering
Dr Hartwig Lohse, Ashland - Drew Ameroid Deutschland GmbH, Germany & Stephen Pitman, Ashland UK Ltd., UK Paper 3: New silicone reactive hot melt for plastic bonding
Dr Patrick Vandereecken (Belgium), Dr Loren Lower (USA), Dr Klaus Kunz (Germany) & Ross Noel (USA), Dow Corning Paper 4: Industrial applications bonding plastics with cyanoacrylates and UV curing adhesives
Bob Goss, Henkel Loctite Adhesives Ltd., UK SESSION 2. ADHESIVE TESTING Paper 5: A guide to adhesive testing
Dr William Broughton, National Physical Laboratory, UK SESSION 3. INFRARED WELDING, RESISTANCE WELDING AND HOT PLATE WELDING Paper 6: An infrared radiation welding of natural thermoplastics using a solid heat sink without causing surface thermal damage
Prof Yasuo Kurosaki, University of Electro-Communications, Tomoya Matayoshi, Mitsui Chemicals Inc. & Kimitoshi Sato, Hiroshima Institute of Technology, Japan Paper 7: Innovations and potentials of high-speed hotplate welding
Prof Dr Helmut Potente, Dr Joachim Schnieders & Maik Bussing, University of Paderborn, Germany SESSION 4. COMPOSITE JOINTS Paper 8: Composite bolted joints behaviour: Effects of hole machining defects
Gina Gohorianu, Robert Pique & Frederic Lachaud, ENSICA & Jean-Jacques Barrau, Paul Sabatier University, France Paper 9: Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency
Dr Geoff Turvey, Lancaster University, UK & P Wang, Schlumberger, UK Paper 10: Energy absorbing joints between fibre reinforced plastics and metals
Dr Ewen Kellar & Dr Faye Smith, TWI Ltd., UK SESSION 5. RESISTANCE WELDING Paper 11 Resistance welding of thermoplastic composites using metal mesh heating elements
Dr Ali Yousefpour, Marc-Andre Octeau & Mehdi Hojjati, Institute for Aerospace Research, Canada SESSION 6. PRETREATMENT Paper 12: Vacuum plasma pre-treatment enhances adhesive bonding of plastics in an environmentally friendly and cost effective way
Paul Lippens, Europlasma NV, Belgium Paper 13: Surface treatment & engineering of plastics by online atmospheric plasma for industrial applications
Dr Bhukan Parbhoo, Surface Chemistry Performance, UK & Dr Thierry Sindzingre, Mr Mathieu Thomachot & Ms Eva Jouvet, AcXys Technologies, France SESSION 7. BONDING FLUOROPLASTICS Paper 14: Adhesion to Fluoropolymers
Dr Derek Brewis & Dr Ralf Dahm, Loughborough University, UK SESSION 8. ULTRASONIC WELDING AND VIBRATION WELDING Paper 15: Ultrasonic & linear vibration welding of plastics - process selection & part design
Peter Wells, Branson Ultrasonics, UK Paper 16: Innovative component and joint designs for successful ultrasonic welding and joining of thermoplastics
Dr Frank Rawson & Sue Osborne, FFR Ultrasonics Ltd., UK SESSION 9. HEATED TOOL WELDING Paper 17: Influence of internal properties to the weld seam quality
Prof. Dr.- Ing. Schmachtenberg, Dr.-Ing. Reiner Luetzeler & Dr.-Ing. Carsten Tuechert, Aachen University of Technology, Germany SESSION 10. LASER WELDING Paper 18: Application studies using through-transmission laser welding of polymers
Dr Marcus Warwick & Marcus Gordon, TWI Ltd., UK Paper 19: Laser welding of plastics - process and production technology
Dr Dirk Hansch, ProLas GmbH, Germany Paper 20: Creating transparent laser weldings on thermoplastic components
Dr-Ing Rolf Klein & Dr Gareth McGrath (UK), Gentex Corporation, USA Paper 21: Engineering plastics for laser welding
Eric van der Vegte & Dr Marnix van Gurp, DSM Engineering Plastics & Hans Hoekstra & Dr Alexander Stroeks, DSM Research, The Netherlands Paper 22: Laser transmission welding of plastics in medical device manufacturing - how to choose the right laser additive
Dr Arno Boehm, BASF Aktiengesellschaft, Germany Paper 23: Colorants and special additives for laser welding
Dr Sibylle Glaser, Treffert GmbH & Co.KG, Germany Paper 24: Process monitoring methods in laser welding of plastics
Ian Jones & John Rudlin, TWI Ltd., UK
