Modern Power System: (IEEE Press Series on Power and Energy Systems)

Comprehensive reference exploring fundamentals of power systems analysis and operation through a unique blend of traditional and modern concepts Modern Power System explains the fundamentals of power systems analysis and operation, the latest developments with regard to transformation of energy sources from the conventional synchronous generators to the inverter-based sources, and the techniques and hardware used for this purpose. The book includes information on traditional power system concepts such as load flow, fault studies, protection, and stability as well as modern concepts including reactive power control, Flexible AC Transmission Systems (FACTS), HVDC transmission, renewable energy, and smart grids. Readers will find insights on topics such as phasor measurement unit (PMUs), wide-area measurements and control, and SCADA systems as well as distribution side aspects such as smart meters, demand management, and energy trading. Readers will also learn about point-to-point HVDC transmission using line commutated converters and multiterminal HVDC transmission. Additional topics discussed include: Power system components such as transmission line parameters, transformer models, per-unit representation, and modeling of transmission lines Economic operation of power plants and systems, with information on unit commitment and automatic generation control Power system protection through instrument transformers, protective relays, and overcurrent relay coordination Reactive power compensation, covering voltage stability and ideal reactive compensation Water, solar, wind, hydrogen, and nuclear fusion as alternative energy sources Modern Power System is an excellent textbook for undergraduate and graduate students in electrical engineering with a power engineering specialization, as well as practicing power system engineers seeking to keep up with the latest developments in the field.

Table of Contents:
Preface xv About the Author xxi Acknowledgments xxiii About the Companion Website xxv 1 Introduction 1 1.1 A Brief History of Electricity 1                                            1.1.1 The Dawn of Electricity 3 1.1.2 Development of Electrical Power Plant 4 1.2 Interconnection of Electricity Grids 9 1.3 Deregulation 10 1.4 Renewable Energy 13 1.5 Blackouts 15 1.5.1 Power System Oscillations 16 1.6 Smart Grid 18 1.7 Phasor Analysis 20 1.8 Concluding Remarks 21 References 21 2 Power System Components 23 2.1 Transmission Line Parameters 25 2.1.1 Line Resistance 25 2.1.2 Line Inductance 27 2.1.3 Line Charging Capacitance 31 2.2 Synchronous Machine Model 33 2.3 Transformer Model 35 2.4 Per Unit Representation 36 2.5 Modeling Transmission Lines 42 2.5.1 ABCD Parameters 43 2.5.2 Voltage Regulation 44 2.5.3 Short Line Approximation 45 2.5.4 Medium Line π Approximation 45 2.5.5 Medium Line T Approximation 46 2.5.6 Long Line Model 49 2.5.7 Equivalent-π Representation of a Long Line 53 2.5.8 Some Issues with Transmission Lines 55 2.6 Lossless Transmission Lines 56 2.6.1 Traveling Waves 58 2.6.2 Traveling Wave in Single-Phase, Two-Wire Line 60 2.7 Concluding Remarks 64 References 64 Problems 65 3 Power Flow Studies 69 3.1 Formation of Bus Admittance Matrix 70 3.1.1 Without Line Charging Capacitors 70 3.1.2 With Line Charging Capacitors 73 3.2 Load Flow Preliminaries 74 3.2.1 Classification of Buses 76 3.2.2 Data Preparation 77 3.3 Load Flow Methods 79 3.3.1 Gauss–Seidel Load Flow Method 80 3.3.2 Basics of Newton–Raphson Iterative Procedure 83 3.3.3 Newton–Raphson Load Flow Method 85 3.3.4 Fast Decoupled Load Flow 91 3.3.5 Line Flows 96 3.3.6 DC Load Flow 98 3.4 State Estimation 100 3.4.1 Principles of Estimation 100 3.4.2 Maximum-Likelihood Estimation 101 3.4.3 DC State Estimation 104 3.4.4 AC State Estimation 106 3.4.5 Bad Data Detection 110 3.5 SCADA and EMS 114 3.6 Concluding Remarks 115 References 116 Problems 117 4 Economic Operation of Power System 125 4.1 Economic Operation of a Power Plant 126 4.1.1 Economic Distribution of Loads Between Two Units of a Plant 126 4.1.2 Economic Distribution of Loads Between Multiple Units of a Plant 130 4.1.3 Consideration of Generator Limits 133 4.2 Economic Operation of a Power System 136 4.3 Unit Commitment 141 4.3.1 Spinning Reserve 145 4.3.2 Thermal Limit Constraints 145 4.3.3 Solution Methods for Unit Commitment Problem 146 4.4 Automatic Generation Control 148 4.4.1 Load Frequency Control (LFC) 153 4.4.2 Coordination Between LFC and Economic Operation 155 4.5 Concluding Remarks 156 References 157 Problems 157 5 Power System Fault Analysis 161 5.1 Transients in an RL Circuit 162 5.1.1 DC Source 162 5.1.2 AC Source 164 5.1.3 Fault in an AC Circuit 165 5.2 Short Circuit in an Unloaded Synchronous Generator 167 5.3 Symmetrical Fault in a Power System 170 5.3.1 Calculation of Fault Current Using Impedance Diagram 170 5.3.2 Calculation of Fault Current Using Bus Impedance Matrix 173 5.4 Symmetrical Components 175 5.4.1 Symmetrical Component Transformation 176 5.4.2 Real and Reactive Power 179 5.5 Sequence Circuits and Networks 180 5.5.1 Sequence Circuit for a Y-Connected Load 181 5.5.2 Sequence Circuit for a Delta-Connected Load 183 5.5.3 Sequence Circuit for a Synchronous Generator 186 5.5.4 Sequence Circuit for a Symmetrical Transmission Line 188 5.5.5 Sequence Circuits for Transformers 191 5.5.5.1 Y–Y-Connected Transformer 191 5.5.5.2 Δ–Δ–Connected Transformer 193 5.5.5.3 Y–Δ-Connected Transformer 195 5.5.6 Sequence Networks 196 5.6 Unsymmetrical Faults 198 5.6.1 Single-Line-to-Ground (1LG) Fault 199 5.6.2 Line-to-Line (LL) Fault 202 5.6.3 Double-Line-to-Ground (2LG) Fault 205 5.6.4 Fault Current Computation Using Sequence Networks 208 5.7 Concluding Remarks 216 Reference 216 Problems 216 6 Power System Protection 223 6.1 Protective Elements 224 6.1.1 Fuses 224 6.1.2 Circuit Breakers 226 6.2 Instrument Transformers 228 6.2.1 Current Transformer (CT) 229 6.2.2 Potential Transformer (PT) 230 6.3 Protective Relays 230 6.3.1 Overcurrent Relay 231 6.3.2 Directional Relay 232 6.3.3 Distance Protection 235 6.3.4 Differential Protection 236 6.3.5 Transformer Protection 237 6.3.6 Pilot Relays 239 6.4 Overcurrent Relay Coordination 241 6.5 Zones of Protection 245 6.6 Protection in the Presence of Distributed Renewable Generators 249 6.6.1 Protection Using Directional Overcurrent Relays 250 6.6.2 Inverse Time Admittance (ITA) Relay 252 6.7 IEC 61850 254 6.8 Concluding Remarks 256 References 257 Problems 258 7 Power System Stability and Control 263 7.1 Transient Stability 265 7.1.1 Power–Angle Curve 265 7.1.2 Swing Equation 268 7.1.3 Critical Clearing Angle 271 7.1.4 Critical Clearing Time 276 7.1.5 Simplified Calculation of Critical Clearing Angle 284 7.2 Multimachine System Stability 286 7.2.1 Classical Method 288 7.2.2 Pre-fault Bus Admittance Matrix 289 7.2.3 Reduction of Bus Admittance Matrix 292 7.2.4 Bus Admittance Matrices During Fault and Post-Fault 293 7.2.5 Multimachine Swing Equation 294 7.2.6 Oscillations in a Two-Area System 296 7.3 Excitation Control 298 7.3.1 Linearized Swing Equation 299 7.3.2 Excitation System 303 7.3.3 Automatic Voltage Regulator (AVR) 306 7.3.4 Power System Stabilizer (PSS) 309 7.4 Concluding Remarks 312 References 312 Problems 313 8 Reactive Power Compensation 319 8.1 Voltage Stability 320 8.2 Ideal Reactive Compensation 325 8.3 Ideal Shunt Compensation 326 8.3.1 Improving Voltage Profile 327 8.3.2 Improving Power-Angle Characteristics 332 8.3.3 Improving Stability Margin 334 8.3.4 Power Swing Damping 337 8.3.5 Shunt Compensator Representation 338 8.4 Ideal Series Compensation 340 8.4.1 Impact of Series Compensator on Voltage Profile 340 8.4.2 Improving Power-Angle Characteristics 343 8.4.3 Improving Stability Margin 346 8.4.4 Power Flow Control and Power Swing Damping 346 8.4.5 An Alternate Method of Series Compensation 349 8.5 Concluding Remarks 352 References 352 Problems 353 9 Flexible AC Transmission Systems (FACTS) 357 9.1 Static Var Compensator (SVC) 358 9.1.1 Thyristor-Switched Capacitor (TSC) 358 9.1.2 Thyristor-Controlled Reactor (TCR) 360 9.1.3 Composition of SVC 365 9.1.4 SVC Characteristics 366 9.2 Static Compensator (STATCOM) 368 9.3 High-Power Converters 369 9.3.1 Six-Step Converter 370 9.3.2 Twelve-Step Converter 372 9.3.3 6q-Step Converter 377 9.3.4 Multilevel Converters 377 9.4 Subsynchronous Oscillations 379 9.4.1 Subsynchronous and Supersynchronous Frequencies 380 9.4.2 Shaft Torsional Modes 381 9.4.3 Subsynchronous Frequency Analysis 384 9.4.4 Countermeasures to SSR 388 9.5 Thyristor-Controlled Series Compensator (TCSC) 389 9.5.1 When One of the Thyristors Is On 390 9.5.2 When Both Thyristors Are Off 392 9.5.3 Estimating the Fundamental Impedance of a TCSC 392 9.6 Static Synchronous Series Compensator (SSSC) 396 9.7 Other FACTS Devices 400 9.7.1 Unified Power Flow Controller (UPFC) 400 9.7.2 Thyristor-Controlled Braking Resistor (TCBR) 403 9.7.3 Thyristor-Controlled Voltage Regulator (TCVR) 404 9.7.4 Thyristor-Controlled Phase Angle Regulator (TCPAR) 406 9.8 Concluding Remarks 406 References 407 Problems 409 10 High-Voltage DC (HVDC) Transmission Systems 413 10.1 Attributes of DC Systems 414 10.1.1 Advantages and Disadvantages of HVDC Systems 414 10.1.2 Types of HVDC Systems 415 10.2 LCC-HVDC Systems 417 10.2.1 System Characteristics with Zero Ignition Angle 418 10.2.2 System Characteristics with Nonzero Ignition Angle 419 10.2.3 Overlap Angle 421 10.2.4 Inverter Operation 422 10.2.5 Active Power 423 10.2.6 Twelve-Pulse Converter 425 10.3 VSC-HVDC Systems 425 10.3.1 Control of a Voltage Source Converter (VSC) 426 10.3.2 VSC-HVDC Configuration 427 10.3.3 Direct Control of VSC-HVDC Systems 429 10.3.4 Vector Control of VSC-HVDC Systems 430 10.4 Multiterminal HVDC Systems 434 10.4.1 Multiterminal System Configurations 436 10.4.2 MTDC Control 437 10.5 DC Protection Systems 441 10.6 Concluding Remarks 442 References 443 Problems 444 11 Renewable Energy 447 11.1 Waterpower 448 11.1.1 Hydropower 448 11.1.2 Types of Hydropower Turbines 450 11.1.3 Pumped Hydro Storage (PHS) 450 11.1.4 Tidal Energy 452 11.1.5 Wave Energy 454 11.2 Solar Power 456 11.2.1 Solar Tracking 457 11.2.2 Solar Photovoltaic (PV) Systems 459 11.2.3 Maximum Power Point Tracking (MPPT) 462 11.2.4 Concentrated Solar Power (CSP) 466 11.3 Wind Power 467 11.3.1 Wind Turbine Types 468 11.3.2 Wind Power Calculations 470 11.3.3 Pitch Angle Control 472 11.3.4 Types of Wind Power Collectors 473 11.4 Hydrogen 478 11.4.1 Hydrogen Production 480 11.4.2 Hydrogen Storage and Transmission 482 11.4.3 Utilization of Hydrogen 483 11.5 Nuclear Fusion 484 11.6 Renewable Energy in Power Transmission Systems 486 11.6.1 Grid Forming Converter (GFC) 487 11.6.2 Virtual Synchronous Generator (VSG) 488 11.6.3 Fault Ride Through (FRT) 491 11.7 Renewable Energy in Power Distribution Systems 492 11.7.1 Voltage Rise and Line Loss 493 11.7.2 Reverse Power Flow and Voltage Unbalance 500 11.8 Concluding Remarks 504 References 506 Problems 508 12 Fundamentals of Smart Grid 511 12.1 Sensor Systems 513 12.1.1 Computation of Phasors from Instantaneous Measurements 513 12.1.2 Phasor Measurement Unit (PMU) 517 12.1.3 Smart Meter 519 12.2 Demand Response 520 12.2.1 Controlling Household Appliances 524 12.3 Cybersecurity 526 12.3.1 False Data Injection Attacks 527 12.4 Electric Vehicle (EV) 529 12.4.1 Types of Electric Vehicles 529 12.4.2 EV Charging 532 12.4.3 Wireless Charging 533 12.5 Smart Grid Communications 536 12.5.1 Smart Grid Communication Mediums 536 12.5.2 Communication Requirements 540 12.6 Smart Grid Standards 540 12.7 Smart Distribution Grids 542 12.7.1 Virtual Power Plant (VPP) 542 12.7.2 Microgrid (MG) 544 12.7.3 Microgrid Control 545 12.8 Concluding Remarks 548 References 548 Index 000

About the Author :
Arindam Ghosh, PhD, is a Research Academic Professor at Curtin University, Perth, Australia. He obtained his PhD from the University of Calgary, Canada. He was conferred the IEEE PES Nari Hingorani Custom Power Award in 2019. He has published over 450 peer reviewed journal and conference articles and has authored two books. He is a Fellow of the Indian National Academy of Engineering (INAE) and a Fellow of the Institute of Electrical and Electronics Engineers (IEEE).