Mechatronics Engineering and Electrical Engineering: Proceedings of the 2014 International Conference on Mechatronics Engineering and Electrical Engineering (CMEEE 2014), Sanya, Hainan, P.R. China, 17–

The 2014 International Conference on Mechatronics Engineering and Electrical Engineering (CMEEE2014) was held October 18-19, 2014 in Sanya, Hainan, China. CMEEE2014 provided a valuable opportunity for researchers, scholars and scientists to exchange their new ideas and application experiences face to face together, to establish business or research relations and to find global partners for future collaboration. The papers in this book are selected from more than 500 papers submitted to the 2014 International Conference on Mechatronics Engineering and Electrical Engineering (CMEEE2014). The book is divided into 4 sections, covering the topics of Mechatronics, Electrical Engineering, Control and Automation and Other Engineering. The conference will promote the development of Mechatronics Engineering and Electrical Engineering, strengthening international academic cooperation and communications.

Table of Contents:
Battlefield situation cognition system based on big electronic reconnaissance data processing S.M. Xu, H.B. Yu & F.H. Chu Automatic recognition of waste rock in top coal caving based on digital image processing B.P. Wang, Y.J. Wang & Z.C. Wang The application of Dijkstra algorithm based on multi-weighted distribution in GIS Sh.M. Wang, H.T. Luo & B.W. Wang Design of battery charging and discharging circuit H.Q. Zhan & Z.P. Li Automatic flight control of a certain UAV using LQG design Sh.Y. Zhang Research on online and remote calibration technology of electronic belt scale based on weights superposition method X.P. Shang, H.Y. Chen & Z.W. Huang The application of wavelet filter in static synchronous compensator L. Zhang & N. Liu Fractional-order differential application and research in pavement cracks image enhancement W. Jiang, Y.W. Liu & H. Zhang Molecular algorithm in solving the shortest path problem of the application and research L. Zhang A method about video quality assessment in video phone service over 3G network C. Feng, L.F. Huang & W.J. Xu Analysis on the degree of the international fragment of China’s manufacturing industry based on processing trade Y.H. Yang The voltage-controlled low-pass filter based on FPGA frequency measurement Sh.Q. Ma, L.R. Zheng, J.F. Liu & Y.P. Ji Departure capacity assessment of close staggered parallel runways J.G. Kong, X. Li & W.B. Ding The control design of blast furnace clay gun play mud quantity B.H. Jiang, J. Mei, X. Zhao, D.C. Gao & H. Liu Research and implementation of coal traffic video management system based on the technology of image tracking and recognition S.J. Jin Residents air conditioning load management model studies and impact analysis B. Li, S.W. Li, S.X. Zhang, X.S. Jing, F. Wu & X.J. Weng Multi-objective optimized scheduling for hydro-thermal power system W.J. Liu & P.F. Cheng An optimal space-borne Solid-State Recorder based on domestic chips S. Li, Q. Song, J.W. Song, W. Wang, Y. Zhu & J.S. An Study on additional damping controller for VSC-HVDC to prevent low-frequency oscillation Z.H. Wang, Y. Li & X.Y. He Lightning surge analysis for 220 kV AC double circuit transmission line using LPTL Y. Ma, C.S. Liu, Y. Liu, G. Chen, T.X. Xie, Z.C. Zhou & F.B. Tao Fault analysis of Metal Oxide Varistor (MOV) for series compensation capacitor banks Y. Ma, Y. Liu, P. Li, G. Chen & Z.Z. Zhou Experimental study of the human retinal security by LED light L. Zhao, L. Lu, Sh.Y. Ren, L.Q. Geng & C.T. Li Analysis of the phenomenon in LFO of AC electric locomotive J.J. Ding, Y. Tu & S.B. Gao The prototype of fatigue damage detection by the method of Metal Magnetic Memory Testing X.Y. Yu & X.Y. Fu Rotor composite faults diagnosis of asynchronous motor based on complex power Zh. Wang, Zh.F. Lin, Ch. Li & Zh. Zeng Commissioning and operation of Heze some leather wastewater treatment plant K. Wang, B. Liu, H.D. Zhang & W. Zhao Engineering depth treatment of pharmaceutical wastewater by magnetization catalytic oxidation-A2O-MBR combined process W. Zhao, B. Liu, H.D. Zhuang, K. Wang & H.D. Ji Study of broadband microstrip circulator using YIG single crystal Zh.Q. Cheng, Y. Luan, M.Sh. Jia & X.X. Lian Decoupling mechanism for suspension laryngoscopy using a curved-frame trans-oral robotic system X.Y. Fu, X.Y. Yu & J.T. Seo Calculation and analysis on shunt coefficient of short-circuit current inside Fuzhou 1000 kV Ultra-High Voltage substation B. Zhang, B. Tang, W.H. Ma & J.Y. Zou Mechanical analysis of reliability test device of Head-Up Display’s retraction and extension Y.G. Liu & Y.X. Wang Study on electromagnetic loop rejection in Liaoning power grid K. Gao & Zh.H. Wang Study on effect of evaluating corrosion inhibitor for circulating cooling water in dynamic simulation method Y.P. Li, Y. Li & F. Liu Research on the impulse current dispersal characteristics of tower grounding devices Ch.Ch. Zhu, T. Wang, X.F. Tong, P.X. Xing, Zh.Q. Feng, H.L. Lu & L. Lan Innovative design of centrifugal oil press C.Q. Zhong & Y.L. Zhang Analysis of the centrifugal oil press vibration C.Q. Zhong & Y.L. Zhang HPLC method for determination of concentration of Nifekalant in human plasma X. Xie Research of over-voltage in air-core reactor using Waveform Relaxation based on Lanczos L.M. Bo, B. Bao & Y. Xu The design of automatic sorting and staking system based on PLC S7-200 L.Y. Fang, X.Y. Zhou, F.G. Wu & X. Zhang Study of dynamic optimized allocation policy for AGC regulation power based on fuzzy-Q learning algorithm H. Qian, L. Zhou, W.X. Jin & J.B. Luo Fault diagnosis of rolling bearing based on Fisher Discriminant Analysis W.B. Zhang, Ch.G. Liang & G.Ch. Li The voltage coordinated control strategy of the power grid which includes large scale wind power R. Shi, R. Jiao, Z.J. Chi & X.N. Kang Research on predict Direct Capacitor Power Control of voltage source PWM rectifier, applied to electric vehicle charging and discharging field Ch. Gong, L.F. Ma, Zh.J. Chi, W. Li, B.Q. Zhang & Y.T. Zhao Development of 2500V SMB-seagull SiC JBS diodes G. Chen, Q.M. Zhang, S. Bai, A. Liu, L. Wang, R.H. Huang, D.H. Li & Y.N. Li Feature-based intelligent machining method based on NX X.H. Zhan & X.D. Li The application of Analyze Formability-One-Step in progressive die strip design X.D. Li & X.H. Zhan The research on the signal reconstruction of the angular rate sensor L.Y. Yuan, W.G. Zhang & X.X. Liu Research on the application of Beidou and GPS dual-mode timing system in the space flight tracking ship F. Zhang, Y.B. Ren & Y. Zhou Study of the wind-thermal allocation ratio for wind and thermal bundled power as a source to participate in power planning X.M. Cao, T.Q. Liu, X.T. Hu, Z.H. Chen, F.J. Wang & T.Y. Guan A design method of inductance-capacitance filter circuit for reducing current harmonics of high-speed motor Y.Q. Mo & P.J. Dong Burr detection algorithm based on machine vision Zh. Shi, Ch.L. Xi, H.L. Li, F.Sh. Tan & J.F. Yan Numerical simulation and experimental study on the anti-overload ability of cylindrical roller bearing in a short time Y.G. Ni, Y. Li, S.E. Deng & X.F. Li Numerical simulation and analysis of wavefront reconstruction iterative method in radial shearing interference Y.F. Wang & Z.S. Da Minimization of stator loss for high speed permanent magnet motor X.Q. Liu Iterative Adaptive Algorithm based on the cross covariance matrix of acoustic pressure and particle velocity C.R. Zhang, J.F. Cheng & B.L. Ma A method to establish a continuous operational reference station in urban districts S.B. Wang, X.J. Du, H.J. Li & W.P. Xu The research on the leak repairing method of the recoil mechanism N. Li, W. Jiang, H.P. Guo, S. Wang & L.M. Chen Image retrieval research based on feature points and affine invariant moments B.Q. He & Z.M. Wang Research on Electric Vehicle development in Beijing L. Zhang, M.Y. Pan, Z.J. Chi, Y.X. Chen & X.N. Kang Lubrication performance analysis of three axial-grooved gas-lubricated journal bearing with micro grooves Y.J. Lu, F.X. Liu, Y.F. Zhang, C. Tian & M. Li A new configuration of current source converter applied in HVDC J.Y. Zhao, F.M. Zhang, F.G. Liu & Y.H. Liu Application of high-order grey forecast model in the short-term load forecasting X.Y. Huang & L. Yang Offshore wind power scale development trends and related policy research Y. Zeng, J.S. Luo, X.L. Wang, P. Song, H.W. Huang & H.L. Bao A power response characteristics equivalent model for the hybrid energy storage system P. Chen, F. Xiao, X.W. Wang, H. Yang, Z.L. Yang & L.J. Wang The research for power allocation strategy of the hybrid energy storage units in distributed generation system Z.L. Yang, P. Chen, L.J. Wang, Y.H. Wang, F. Xiao, X.W. Wang & H. Yang Research on the control of temperature of batch reactors by multi-media in the reactor jacket H.B. Li, D.Y. Feng & H. Liu Three-phase voltage source PWM rectifier based on space-vector algorithm and one-cycle control L.F. Ma, Ch. Gong, Zh.J. Chi, J.M. Cao & L. Zhu Joint positioning method with radar based on wavelet entropy H. Yu, J. Liu, M. Wang, R. Guo & Y. Yang Optimal design of locking pin for surface AUVs launcher under uncertainty S.Q. Yang A low temperature drift and heavy load bandgap reference voltage with adjustable output X. Xu & J. Jiang Analysis of energy coupling between the computer chassis and electromagnetic pulse J. Liu, Y.F. Wang, Z.X. Chen & C.D. Yu Analysis of electromagnetic shielding effectiveness of the chassis with holes under different polarization directions Q.B. Deng, C.D. Yu & Z.P. Lian Analysis of characteristic parameters of pulse impact on the electromagnetic coupling of the chassis C.D. Yu, Z.X. Chen, Y.F. Wang & J. Liu A new type of control method for the variable-speed wind turbines based on the PID neural network T. Li, X.Y. Hou, H.Y. Lin, Q.Y. Liu, L. Zhao & H.J. Liu Research on the control method for the torque of wind generator based on data-driven T. Li, X.Y. Hou, H.Y. Lin, L. Zhao, H.J. Liu & Q.Y. Liu Construction of robustly stable interval polynomial T.A. Ezangina, S.A. Gayvoronskiy & S.V. Efimov A MEMS digital seismometer with new structure J. Guo & S.H. Xu A type of real-time vibration monitoring system based on Ethernet and RS-232 S.H. Xu, J. Guo & P.P. Li Study on the transient voltage stability of distribution systems considering large-scaled dispersed EV charging Y.X. Chen, Z.J. Chi, P.W. Zheng & X.N. Lin Fault diagnosis and failure rate analysis of power transformer based on cloud relation space model L.J. Guo & S.M. Tao Analysis on technical innovation and regional disparities growth of China J. Xiong & W.W. Zhang