Microwave and RF Engineering: (Microwave and Optical Engineering)

An essential text for both students and professionals, combining detailed theory with clear practical guidance This outstanding book explores a large spectrum of topics within microwave and radio frequency (RF) engineering, encompassing electromagnetic theory, microwave circuits and components. It provides thorough descriptions of the most common microwave test instruments and advises on semiconductor device modelling. With examples taken from the authors' own experience, this book also covers: network and signal theory; electronic technology with guided electromagnetic propagation; microwave circuits such as linear and non-linear circuits, resonant circuits and cavities, monolithic microwave circuits (MMICs), wireless architectures and integrated circuits; passive microwave components, control components; microwave filters and matching networks. Simulation files are included in a CD Rom, found inside the book. Microwave and RF Engineering presents up-to-date research and applications at different levels of difficulty, creating a useful tool for a first approach to the subject as well as for subsequent in-depth study. It is therefore indispensable reading for advanced professionals and designers who operate at high frequencies as well as senior students who are first approaching the subject.

Table of Contents:
About the Authors xv Preface xvii 1 Introduction 1 1.1 Microwaves and radio frequencies 1 1.2 Frequency bands 4 1.3 Applications 6 Bibliography 8 2 Basic electromagnetic theory 9 2.1 Introduction 9 2.2 Maxwell’s equations 9 2.3 Time-harmonic EM fields; polarization of a vector 12 2.4 Maxwell’s equations in the harmonic regime 14 2.5 Boundary conditions 15 2.6 Energy and power of the EM field; Poynting’s theorem 17 2.7 Some fundamental theorems 19 2.7.1 Uniqueness theorem 19 2.7.2 Lorentz’s reciprocity theorem 19 2.7.3 Love’s equivalence theorem 20 2.8 Plane waves 21 2.9 Solution of the wave equation in rectangular coordinates 22 2.9.1 Plane waves: an alternative derivation 24 2.9.2 TEM waves 25 2.9.3 TE and TM waves 26 2.10 Reflection and transmission of plane waves; Snel’s laws 27 2.10.1 Snel’s laws; total reflection 28 2.10.2 Reflection and transmission (Fresnel’s) coefficients 31 2.10.3 Reflection from a conducting plane 34 2.11 Electrodynamic potentials 36 Bibliography 38 3 Guided EM propagation 39 3.1 Introduction 39 3.2 Cylindrical structures; solution of Maxwell’s equations as TE, TM and TEM modes 41 3.3 Modes of propagation as transmission lines 48 3.4 Transmission lines as 1-D circuits 52 3.5 Phase velocity, group velocity and energy velocity 55 3.6 Properties of the transverse modal vectors et, ht; field expansion in a waveguide 57 3.7 Loss, attenuation and power handling in real waveguides 59 3.8 The rectangular waveguide 61 3.9 The ridge waveguide 67 3.10 The circular waveguide 68 3.11 The coaxial cable 72 3.12 The parallel-plate waveguide 74 3.13 The stripline 76 3.14 The microstrip line 78 3.14.1 The planar waveguide model 82 3.15 The coplanar waveguide 82 3.16 Coupled lines 84 3.16.1 Basic principles for EM analysis 85 3.16.2 Equivalent circuit modelling 86 Bibliography 88 4 Microwave circuits 91 4.1 Introduction 91 4.2 Microwave circuit formulation 91 4.3 Terminated transmission lines 94 4.4 The Smith chart 97 4.5 Power flow 105 4.6 Matrix representations 109 4.6.1 The impedance matrix 109 4.6.2 The admittance matrix 110 4.6.3 The ABCD or chain matrix 111 4.6.4 The scattering matrix 112 4.7 Circuit model of a transmission line section 119 4.8 Shifting the reference planes 123 4.9 Loaded two-port network 124 4.10 Matrix description of coupled lines 125 4.11 Matching of coupled lines 126 4.12 Two-port networks using coupled-line sections 127 Bibliography 129 5 Resonators and cavities 131 5.1 Introduction 131 5.2 The resonant condition 131 5.3 Quality factor or Q 134 5.4 Transmission line resonators 136 5.5 Planar resonators 139 5.6 Cavity resonators 142 5.7 Computation of the Q factor of a cavity resonator 144 5.8 Dielectric resonators 146 5.9 Expansion of EM fields 147 5.9.1 Helmholtz’s theorem 148 5.9.2 Electric and magnetic eigenvectors 148 5.9.3 General solution of Maxwell’s equations in a cavity 153 5.9.4 Resonances in ideal closed cavities 154 5.9.5 The cavity with one or two outputs 155 5.9.6 Excitation of cavity resonators 157 Bibliography 161 6 Impedance matching 163 6.1 Introduction 163 6.2 Fano’s bound 163 6.3 Quarter-wavelength transformer 165 6.4 Multi-section quarter-wavelength transformers 167 6.4.1 The binomial transformer 171 6.4.2 Chebyshev polynomials; the Chebyshev transformer 172 6.5 Line and stub transformers; stub tuners 178 6.6 Lumped L networks 180 Bibliography 185 Simulation files 185 7 Passive microwave components 187 7.1 Introduction 187 7.2 Matched loads 187 7.3 Movable short circuit 188 7.4 Attenuators 190 7.5 Fixed phase shifters 193 7.5.1 Loaded-line phase shifters 193 7.5.2 Reflection-type phase shifters 194 7.6 Junctions and interconnections 195 7.6.1 Guide-to-coaxial cable transition 198 7.6.2 Coaxial-to-microstrip transition 203 7.7 Dividers and combiners 204 7.7.1 The Wilkinson divider 205 7.7.2 Hybrid junctions 209 7.7.3 Directional couplers 211 7.8 Lumped element realizations 221 7.9 Multi-beam forming networks 223 7.9.1 The Butler matrix 224 7.9.2 The Blass matrix 225 7.9.3 The Rotman lens 227 7.10 Non-reciprocal components 230 7.10.1 Isolator 232 7.10.2 Circulator 232 Bibliography 234 Simulation files 235 8 Microwave filters 237 8.1 Introduction 237 8.2 Definitions 237 8.3 Lowpass prototype 239 8.3.1 Butterworth filters 240 8.3.2 Chebyshev filters 240 8.3.3 Cauer filters 244 8.3.4 Synthesis of the lowpass prototype 245 8.4 Semi-lumped lowpass filters 250 8.5 Frequency transformations 254 8.5.1 Lowpass to highpass transformation 255 8.5.2 Lowpass to bandpass transformation 257 8.5.3 Lowpass to bandstop transformation 260 8.5.4 Richards transformation 261 8.6 Kuroda identities 264 8.7 Immittance inverters 267 8.7.1 Filters with line-coupled short-circuit stubs 273 8.7.2 Parallel-coupled filters 277 8.7.3 Comb-line filters 281 Bibliography 286 Simulation files 286 9 Basic concepts for microwave component design 289 9.1 Introduction 289 9.2 Cascaded linear two-port networks 289 9.3 Signal flow graphs 302 9.4 Noise in two-port networks 303 9.4.1 Noise sources 303 9.4.2 Representation of noisy two-port networks 305 9.4.3 Noise figure and noise factor 306 9.4.4 Noise factor of cascaded networks 313 9.4.5 Noise bandwidth 314 9.5 Nonlinear two-port networks 316 9.5.1 Harmonic and intermodulation products 317 9.5.2 Harmonic distortion 317 9.5.3 Intermodulation distortion 319 9.5.4 Gain compression 321 9.5.5 Intercept points 326 9.5.6 Saturation and intercept point of cascaded two-port networks 328 9.6 Semiconductors devices 334 9.6.1 Basic semiconductor physics 334 9.6.2 Junction diode 336 9.6.3 Bipolar transistor 338 9.6.4 Junction field effect transistor 339 9.6.5 Metal oxide field effect transistor 340 9.7 Electrical models of high-frequency semiconductor devices 342 9.7.1 Linear models 342 9.7.2 Nonlinear semiconductor models 348 Bibliography 360 Related Files 360 10 Microwave control components 363 10.1 Introduction 363 10.2 Switches 363 10.2.1 PIN diode switches 368 10.2.2 FET switches 375 10.2.3 MEMS switches 379 10.2.4 Alternative multi-port switch structures 385 10.3 Variable attenuators 389 10.4 Phase shifters 400 10.4.1 True-delay and slow-wave phase shifters 402 10.4.2 Reflection phase shifters 404 10.4.3 Stepped phase shifters 407 10.4.4 Binary phase shifters 408 10.4.5 Final considerations on phase shifters 412 Bibliography 412 Related files 413 11 Amplifiers 415 11.1 Introduction 415 11.2 Small-signal amplifiers 415 11.2.1 Gain definitions 416 11.2.2 Stability 420 11.2.3 Matching networks 424 11.2.4 Maximum gain impedance matching 425 11.3 Low-noise amplifiers 429 11.4 Design of trial amplifier 432 11.5 Power amplifiers 440 11.5.1 Output power optimization with negligible transistor parasitics 440 11.5.2 Output power optimization in presence of transistor parasitics 444 11.5.3 Load pull 451 11.5.4 Balanced amplifiers 454 11.5.5 PA classes 459 11.5.6 Amplifier linearization 473 11.5.7 Additional PA issues 481 11.6 Other amplifier configurations 482 11.6.1 Feedback amplifiers 483 11.6.2 Distributed amplifiers 485 11.6.3 Differential pairs 489 11.6.4 Active loads 494 11.6.5 Cascode configuration 495 11.7 Some examples of microwave amplifiers 497 11.7.1 Two-stage millimetre-wave amplifier 497 11.7.2 Low-noise amplifier 499 Bibliography 501 Related files 501 12 Oscillators 503 12.1 Introduction 503 12.2 General principles 503 12.3 Negative resistance oscillators 508 12.4 Positive feedback oscillators 512 12.5 Standard oscillator configuration 518 12.5.1 Inductively coupled oscillator 521 12.5.2 Inductive gate feedback oscillator 523 12.5.3 Hartley oscillator 525 12.5.4 Colpitts oscillator 526 12.5.5 Clapp oscillator 527 12.5.6 Differential oscillator 528 12.6 Design of a trial oscillator 530 12.7 Oscillator specifications 534 12.8 Special oscillators 543 12.8.1 Lumped element and transmission line oscillators 543 12.8.2 Cavity oscillators and dielectric resonator oscillators 547 12.8.3 Voltage-controlled oscillators 549 12.8.4 Push–push oscillators 553 12.8.5 Amplitude-stabilized oscillators 555 12.9 Design of a push –push microwave VCO 557 Bibliography 559 Related files 559 13 Frequency converters 561 13.1 Introduction 561 13.2 Detectors 561 13.2.1 Quadratic diode detector 563 13.2.2 Envelope detectors 570 13.2.3 FET detectors 573 13.3 Mixers 577 13.3.1 Product detector 579 13.3.2 Single-ended diode mixers 581 13.3.3 Singly balanced diode mixers 584 13.3.4 Doubly balanced diode mixers 590 13.3.5 Subharmonically pumped mixers 594 13.3.6 Image reject mixers 597 13.3.7 Suppression in presence of amplitude and phase imbalance 600 13.3.8 FET mixers 602 13.3.9 Mixers based on differential pairs 606 13.3.10 Mixer nonlinearities 617 13.4 Frequency multipliers 625 Bibliography 630 Related files 630 14 Microwave circuit technology 633 14.1 Introduction 633 14.2 Hybrid and monolithic integrated circuits 633 14.2.1 High-frequency PCB 634 14.2.2 Hybrid MICs 635 14.2.3 MMICs 636 14.2.4 Advanced hybrid MICs 637 14.2.5 Parasitic elements associated to physical devices 637 14.3 Basic MMIC elements 639 14.3.1 Transmission lines 640 14.3.2 Via holes 640 14.3.3 Resistors 641 14.3.4 Inductors 643 14.3.5 Capacitors 645 14.3.6 Semiconductor devices 646 14.4 Simulation models and layout libraries 649 14.4.1 Single element models 650 14.4.2 Scalable models 650 14.4.3 Nonlinear models 651 14.4.4 MMIC statistical models 651 14.4.5 Temperature-dependent models 652 14.5 MMIC production technique 652 14.5.1 Lithography 653 14.5.2 On-wafer testing 655 14.5.3 Cut and selection 655 14.6 RFIC 656 Bibliography 657 15 RF and microwave architectures 659 15.1 Introduction 659 15.2 Review of modulation theory 659 15.2.1 Amplitude modulation 660 15.2.2 Angular modulation 663 15.3 Transmitters 665 15.3.1 Direct modulation transmitters 665 15.3.2 Polar modulator 675 15.3.3 Cartesian modulator 677 15.3.4 Transmitters with frequency translation 681 15.4 Receivers 682 15.4.1 RF tuned receivers 682 15.4.2 Superetherodyne receivers 692 15.4.3 Zero-IF and low-IF receivers 696 15.4.4 Walking IF receivers 699 15.4.5 One practical IC-based receiver 701 15.4.6 Digital receivers 703 15.5 Further concepts on RF transmitters and receivers 710 15.5.1 Transceivers 710 15.5.2 CAD analysis of a radar transmitting subassembly 719 15.5.3 Receiver performance analysis 725 15.6 Special radio functional blocks 731 15.6.1 Quadrature signal generation 731 15.6.2 PLL 735 15.6.3 ALC and AGC 744 15.6.4 SDLVA 749 Bibliography 753 Related files 754 16 Numerical methods and CAD 757 16.1 Introduction 757 16.2 EM analysis 760 16.2.1 The method of moments 761 16.2.2 The finite difference method 763 16.2.3 The FDTD method 766 16.2.4 The finite element method 770 16.2.5 The mode matching method 771 16.3 Circuit analysis 780 16.3.1 Linear analysis: the signal flow graph and the admittance matrix methods 780 16.3.2 Time domain nonlinear analysis 785 16.3.3 Frequency domain nonlinear analysis 786 16.4 Optimization 788 16.4.1 Definitions and basic concepts 789 16.4.2 Objective function 790 16.4.3 Constraints 791 16.4.4 Optimization methods 791 Bibliography 792 17 Measurement instrumentation and techniques 795 17.1 Introduction 795 17.2 Power meters 795 17.3 Frequency meters 798 17.3.1 RF digital frequency meter 798 17.3.2 Microwave digital frequency meter 799 17.3.3 Frequency conversion frequency meters 800 17.3.4 Frequency conversion frequency meter without preselector 802 17.4 Spectrum analyzers 803 17.4.1 Panoramic receiver 803 17.4.2 Superheterodyne spectrum analyzer 806 17.5 Wide-band sampling oscilloscopes 809 17.6 Network analyzers 816 17.6.1 Scalar analyzers 817 17.6.2 Vector analyzers 821 17.6.3 Noise figure meters 833 17.7 Special test instruments 837 17.7.1 IFM 837 17.7.2 Complex test benches 843 17.7.3 Test instruments for non-electrical quantities 846 Bibliography 849 Related files 849 Appendix A Useful relations from vector analysis and trigonometric function identities 851 Appendix B Fourier transform 861 Appendix C Orthogonality of the eigenvectors in ideal waveguides 865 Appendix D Standard rectangular waveguides and coaxial cables 869 Appendix E Symbols for electric diagrams 873 Appendix F List of acronyms 877 Index 883

About the Author :
Roberto Sorrentino, University of Perugia, Italy Giovanni Bianchi, Verigy Ltd, Böblingen, Germany