Hydraulic Fracturing and Well Stimulation, Volume 1

Hydraulic fracturing (or "fracking") has been a source of both achievement and controversy for years, and it continues to be a hot-button issue all over the world. It has made the United States an energy exporting country once again and kept the price of gasoline low, for consumers and companies. On the other hand, it has been potentially a dangerous and destructive practice that has led to environmental problems and health issues.  It is a deeply important subject for the petroleum engineer to explore as much as possible. This collection of papers is the first in the series, Sustainable Energy Engineering, tackling this very complex process of hydraulic fracturing and its environmental and economic ramifications. Born out of the journal by the same name, formerly published by Scrivener Publishing, most of the articles in this volume have been updated, and there are some new additions, as well, to keep the engineer abreast of any updates and new methods in the industry. Truly a snapshot of the state-of-the-art, this groundbreaking volume is a must-have for any petroleum engineer working in the field, environmental engineers, petroleum engineering students, and any other engineer or scientist working with hydraulic fracturing.

Table of Contents:
Foreword xiii Part 1: Introduction 1 1 Hydraulic Fracturing, An Overview 3 Fred Aminzadeh 1.1 What is Hydraulic Fracturing? 4 1.2 Why Hydraulic Fracturing is Important 5 1.3 Fracture Characterization 8 1.4 Geomechanics of Hydraulic Fracturing 11 1.5 Environmental Aspects of Hydraulic Fracturing 14 1.6 Induced Seismicity 18 1.7 Case Study: Fracturing Induced Seismicity in California 23 1.8 Assessment of Global Oil and Gas Resources Amenable for Extraction via Hydraulic Fracturing 27 1.9 Economics of HF 27 1.10 Conclusions 28 Acknowledgement 30 References 30 Part 2: General Concepts 35 2 Evolution of Stress Transfer Mechanisms During Mechanical Interaction Between Hydraulic Fractures and Natural Fractures 37 Birendra Jha 2.1 Introduction 37 2.2 Physical Model 39 2.3 Mathematical Formulation 40 2.4 Numerical Model 43 2.5 Simulation Results 44 2.6 Effect of Hydraulic Fracturing on Natural Fractures 46 2.7 Conclusion 49 References 50 3 Primer on Hydraulic Fracturing Concerning Initiatives on Energy Sustainability 53 Michael Holloway and Oliver Rudd 3.1 Hydraulic Fracturing 54 3.1.1 Environmental Impact – Reality vs. Myth 54 3.1.2 The Tower of Babel and How it Could be the Cause of Much of the Fracking Debate 55 3.1.3 Frac Fluids and Composition 57 3.1.4 Uses and Needs for Frac Fluids 57 3.1.5 Common Fracturing Additives 58 3.1.6 Typical Percentages of Commonly Used Additives 60 3.1.6.1 Proppants 61 3.1.6.2 Silica Sand 63 3.1.6.3 Resin Coated Proppant 65 3.1.6.4 Manufactured Ceramics Proppants 65 3.2 Additional Types 66 3.3 Other Most Common Objections to Drilling Operations 66 3.3.1 Noise 67 3.4 Changes in Landscape and Beauty of Surroundings 68 3.5 Increased Traffic 69 3.6 Chemicals and Products on Locations 70 3.6.1 Material Safety Data Sheets (MSDS) 72 3.6.1.1 Contents of an MSDS 73 3.6.1.2 Product Identification 73 3.6.1.3 Hazardous Ingredients of Mixtures 74 3.6.1.4 Physical Data 74 3.6.1.5 Fire & Explosion Hazard Data 75 3.6.1.6 Health Hazard Data 76 3.6.1.7 Reactivity Data 76 3.6.1.8 Personal Protection Information 77 3.7 Conclusion 77 Bibliography 78 4 A Graph Theoretic Approach for Spatial Analysis of Induced Fracture Networks 79 Deborah Glosser and Jennifer R. Bauer 4.1 Background and Rationale 80 4.2 Graph-Based Spatial Analysis 83 4.2.1 Acquire Geologic Data and Define Regional Bounding Lithology 84 4.2.2 Details of the Topological Algorithm 85 4.2.2.1 Data Acquisition, Conditioning and Quanta 85 4.2.2.2 Details of the k-Nearest Neighbor Algorithm 86 4.2.3 The Value of the Topological Approach Algorithm 86 4.3 Real World Applications of the Algorithm 87 4.3.1 Bradford Field: Contrasting the Graph-Based Approaches; k Sensitivity 87 4.3.1.1 Data Sources 88 4.3.1.2 Results 88 4.3.2 Armstrong PA: Testing the Algorithms Against a Known Leakage Scenario 88 4.3.2.1 Data Sources 90 4.3.2.2 Results 90 4.4 Discussion 91 4.4.1 Uses for Industry and Regulators 93 4.5 Conclusions 93 Acknowledgements 94 References 94 Part 3: Optimum Design Parameters 99 5 Fracture Spacing Design for Multistage Hydraulic Fracturing Completions for Improved Productivity 101 D. Maity, J. Ciezobka and I. Salehi 5.1 Introduction 101 5.2 Method 103 5.2.1 Impact of Natural Fractures 104 5.2.2 Workflow 107 5.2.3 Model Fine-Tuning 108 5.2.4 Need for Artificial Intelligence 109 5.3 Data 110 5.4 Results 114 5.4.1 Applicability Considerations 120 5.5 Concluding Remarks 121 Acknowledgement 122 References 122 6 Clustering-Based Optimal Perforation Design Using Well Logs 125 Andrei S. Popa, Steve Cassidy and Sinisha Jikich 6.1 Introduction 126 6.2 Objective and Motivation 127 6.3 Technology 128 6.4 Clustering Analysis 129 6.4.1 C-Means (FCM) Algorithm 130 6.5 Methodology and Analysis 131 6.5.1 Available Data 131 6.6 Applying the FCM Algorithm 134 6.7 Results and Discussion 136 6.8 Conclusions 139 Acknowledgements 139 References 139 7 Horizontal Well Spacing and Hydraulic Fracturing Design Optimization: A Case Study on Utica-Point Pleasant Shale Play 141 Alireza Shahkarami and Guochang Wang 7.1 Introduction 142 7.2 Methodology 143 7.2.1 The Base Reservoir Simulation Model 143 7.3 Optimization Scenarios 147 7.4 Results and Discussion 148 7.4.1 Base Reservoir Model – A Single Well Case 148 7.4.2 Multi-Lateral Depletion – Finding the Optimum Number of Wells 148 7.4.3 Completion Parameters 151 7.4.4 Second Economic Scenario, Reducing the Cost of Completion 153 7.5 Conclusion 154 Acknowledgments 156 Part 4: Fracture Reservoir Characterization 159 Ahmed Ouenes Introduction 159 References 161 8 Geomechanical Modeling of Fault Systems Using the Material Point Method – Application to the Estimation of Induced Seismicity Potential to Bolster Hydraulic Fracturing Social License 163 Nicholas M. Umholtz and Ahmed Ouenes 8.1 Introduction 164 8.2 The Social License to Operate (SLO) 165 8.3 Regional Faults in Oklahoma, USA and Alberta, Canada used as Input in Geomechanical Modeling 166 8.4 Modeling Earthquake Potential using Numerical Material Models 168 8.5 A New Workflow for Estimating Induced Seismicity Potential and its Application to Oklahoma and Alberta 173 8.6 The Benefits of a Large Scale Predictive Model and Future Research 178 8.7 Conflict of Interest 179 Acknowledgements 179 References 179 9 Correlating Pressure with Microseismic to Understand Fluid-Reservoir Interactions During Hydraulic Fracturing 181 Debotyam Maity 9.1 Introduction 181 9.2 Method 182 9.2.1 Pressure Data Analysis 182 9.2.2 Microseismic Data Analysis 186 9.3 Data 187 9.4 Results 188 9.4.1 Pitfalls in Analysis 196 9.5 Conclusions 196 9.6 Acknowledgements 197 References 197 10 Multigrid Fracture Stimulated Reservoir Volume Mapping Coupled with a Novel Mathematical Optimization Approach to Shale Reservoir Well and Fracture Design 199 Ahmed Alzahabi, Noah Berlow, M.Y. Soliman and Ghazi AlQahtani 10.1 Introduction 200 10.2 Problem Definition and Modeling 203 10.2.1 Geometric Interpretation 203 10.2.1.1 Fracture Geometry 203 10.2.2 The Developed Model Flow Chart 204 10.2.3 Well and Fracture Design Vector Components 204 10.3 Development of a New Mathematical Model 204 10.3.1 Methodology 207 10.3.2 Objective Function 207 10.3.3 Assumptions and Constraints Considered in the Mathematical Model 207 10.3.3.1 Sets 208 10.3.3.2 Variables 208 10.3.3.3 Decision Variables 208 10.3.3.4 Extended Sets 208 10.3.3.5 Constant Parameters 209 10.3.3.6 Constraints 209 10.3.4 Stimulated Reservoir Volume Representation 210 10.3.5 Optimization Procedure 211 10.4 Model Building 212 10.4.1 Simulation Model of Well Pad and SRV’s Evaluation 214 10.5 Results and Discussions 216 10.6 Conclusions and Recommendations 216 References 218 Appendix A: Abbreviations 220 Appendix B: Definition of the Fracturability Index Used in the Well Placement Process 220 Appendix C: Geometric Interpretation of Parameters Used in Building the Model 221 11 A Semi-Analytical Model for Predicting Productivity of Refractured Oil Wells with Uniformly Distributed Radial Fractures 227 Xiao Cai, Boyun Guo and Gao li 11.1 Introduction 228 11.2 Mathematical Model 229 11.3 Model Verification 231 11.4 Sensitivity Analysis 231 11.5 Conclusions 233 Acknowledgements 234 References 234 Appendix A: Derivation of Inflow Equation for Wells with Radial Fractures under Pseudo-Steady State Flow Conditions 235 Part 5: Environmental Issues of Hydraulic Fracturing 243 Introduction 243 References 245 12 The Role of Human Factors Considerations and Safety Culture in the Safety of Hydraulic Fracturing (Fracking) 247 Jamie Heinecke, Nima Jabbari and Najmedin Meshkati 12.1 Introduction 248 12.2 Benefits of Hydraulic Fracturing 250 12.3 Common Criticisms 250 12.4 Different Steps of Hydraulic Fracturing and Proposed Human Factors Considerations 252 12.5 Hydraulic Fracturing Process: Drilling 254 12.6 Hydraulic Fracturing Process: Fluid Injection 257 12.7 Fracking Fluid 258 12.8 Wastewater 258 12.9 Human Factors and Safety Culture Considerations 259 12.9.1 Human Factors 259 12.9.1.1 Microergonomics 260 12.9.1.2 Macroergonomics 260 12.9.2 Safety Culture 261 12.10 Examples of Recent Incidents 263 12.11 Conclusion and Recommendations 265 Acknowledgment 266 References 266 13 Flowback of Fracturing Fluids with Upgraded Visualization of Hydraulic Fractures and Its Implications on Overall Well Performance 271 Khush Desai and Fred Aminzadeh 13.1 Introduction 272 13.2 Assumptions 272 13.3 Upgraded Visualization of Hydraulic Fracturing 273 13.3.1 Concept 273 13.3.2 Results 274 13.4 Reasons for Partial Flowback 275 13.4.1 Fracture Modelling 275 13.4.2 Depth of Penetration 276 13.4.3 Closing of Fractures 277 13.4.4 Chemical Interaction of Fracturing Fluids 277 13.5 Impact of Parameters under Control 278 13.6 Loss in Incremental Oil Production 279 13.7 Conclusions 280 13.8 Limitations 281 References 281 Appendix A 282 14 Assessing the Groundwater Contamination Potential from a Well in a Hydraulic Fracturing Operation 285 Nima Jabbari, Fred Aminzadeh and Felipe P. J. de Barros 14.1 Introduction 286 14.2 Risk Pathways to the Shallow Groundwater 288 14.3 Problem Statement 289 14.4 Mathematical Formulation 290 14.5 Hypothetical Case Description and the Numerical Method 291 14.6 Results and Discussion 294 14.7 Conclusion 297 References 298 Index 303

About the Author :
Fred Aminzadeh, PhD, is a world-renowned academic and engineer in the energy industry. A professor at the University of Southern California, he has extensive experience not only in oil and gas, but also in geothermal energy and other areas of energy. He has been a co-author on multiple books and has authored numerous papers that have been well-received by academics and industry experts alike. He is the editor of the journal, The Journal of Sustainable Energy Engineering, formerly of Scrivener Publishing, and he is currently editing the series, Sustainable Energy Engineering, for the Wiley-Scrivener imprint.