About the Book
This issue contains 13 papers from The American Ceramic Society’s 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016 presented in Symposium 3 - 13th International Symposium on Solid Oxide Fuel Cells: Materials, Science, and Technology and Symposium 14 – Single Crystalline Materials for Electrical, Optical, and Medical Applications.
Table of Contents:
Preface vii Introduction ix
SOLID OXIDE FUEL CELLS
Development of SOFC Technology at Taiwan Institute of Nuclear Energy Research 3
Ruey-Yi Lee, Yung-Neng Cheng, Tai-Nan Lin, Chang-Sing Hwang, Ning-Yih Hsu, Wen-Tang Hong, and Chien-Kuo Liu
Development of Plasma Sprayed Protective LSM Coating in INER 19
Chun-Liang Chang, Chang-sing Hwang, Chun-Huang Tsai, Sheng-Fu Yang, Wei-Ja Shong, Te-Jung Daron Huang, and Ming-Hsiu Wu
Production and Co-Sintering at 950°C of Planar Half Cells with CuO-GDC Cermet Supporting Anode and Li2O-Doped GDC Electrolyte 31
V. De Marco, A. Grazioli, and V. M. Sglavo
Sintering Properties of TiC-Ni-Mo Cermet Using Nanosized TiC Powders 39
Jia Huey Kong, Zhezhen Fu, and Rasit Koc
Electrical and Mechanical Properties of Phlogopite Mica/BaO-Al2O3-B2O3-SiO2-Based Glass Sealants for Solid Oxide Fuel Cell 51
Chien-Kuo Liu, Wei-Ja Shong, and Ruey-Yi Lee
Direct Utilization of Ethanol in Solid Oxide Fuel Cells: Preparation and Characterization of CeO2-Al2O3 Based Anodes 61
P. E. V. De Miranda, S. A. Venâncio, B. J. M. Sarruf, G. G. Gomes Jr, and N. Minh
Corrosion Study of Ceria Protective Layer Deposited by Spray Pyrolysis on Steel Interconnects 79
Dagmara Szymczewska, Sebastian Molin, Ming Chen, Piotr Jasi ski, and Peter Vang Hendriksen
Synthesis of Sr2MgMoO6 by Atmosphere-Controlled Calcination Method and Characterization for Solid Oxide Fuel Cells 87
Masahiro Kinoshita, Kyota Hara, Tomohiro Onozawa, Kiyoto Shin-mura, Yu Otani, Seiya Ogawa, Eiki Niwa, Takuya Hashimoto, and Kazuya Sasaki
Phase Interaction and Distribution in Mixed Ionic Electronic Conducting Ceria-Spinel Composites 99
M. Ramasamy, S. Baumann, A. Opitz, R. Iskandar, J. Mayer, D. Udomsilp, U. Breuer, and M. Bram
Interface-Matching for Barium Strontium Ferrate-Ceria by Drop-Coating Buffer Layer 113
Y. M. Wang, T. C. Chen, and H. Y. Chang
Stability of Materials for Solid Oxide Fuel Cells with Ammonia Fuel 123
H. Iwai, M. Saito, Y. Yamamoto, K. Inaoka, S. Suzuki, and Y. Takahashi
Investigation on the Phase Stability of Perovskite in La-Sr-Cr-Fe-O System 127
Hooman Sabarou and Yu Zhong
Investigation on the Performance Testing Reliability by Introducing Current Collection Modification for the Solid Oxide Fuel Cell 137
Ming-Wei Liao, Tai-Nan Lin, Jen-Chen Chang, Maw-Chwain Lee, Rung-Je Yang, Yang-Chuang Chang, Wei-Xin Kao, Lin-Song Lee, Ruey-Yi Lee, Hong-Yi Kuo, Chun-Yen Yeh, and Yu-Ming Chen
CRYSTALLINE MATERIALS FOR ELECTRICAL, OPTICAL AND MEDICAL APPLICATIONS
NaNbO3/PVDF Composite: A Flexible Functional Material 155
G. F. Teixeira, R. A. Ciola, M. A. Zaghete, J. A. Varela, and E. Longo
Author Index 165
About the Author :
Mihails Kusnezoff is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.
Narottam P. Bansal is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.
Kiyoshi Shimamura is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.
