These proceedings contains a collection of 24 papers from five 2012 Materials Science and Technology (MS&T’12) symposia.
- Green Technologies for Materials Manufacturing and Processing III
- Materials Development for Nuclear Applications and Extreme Environments
- Materials Issues in Nuclear Waste Management in the 21st Century
- Energy Conversion – Photovoltaic, Concentrating Solar Power, and Thermoelectric
- Energy Storage: Materials, Systems and Applications
Table of Contents:
Preface ix
MATERIALS FOR NUCLEAR WASTE DISPOSAL AND ENVIRONMENTAL CLEANUP
Boron and Lead Based Chemically Bonded Phosphates Ceramics for Nuclear Waste and Radiation Shielding Applications 3
Henry A. Colorado, Jason Pleitt, Jenn-M. Yang, and Carlos H. Castano
Advanced Ceramic Wasteforms for the Immobilisation of Radwastes 11
M.C. Stennett, L.D. Casey, C.L. Corkhill, C.L Freeman, A.S. Gandy, P.G. Heath, I.J. Pinnock, D.P. Reid, and N.C. Hyatt
Migration of Iodine Solidified in Ettringite into Compacted Bentonite 23
Kazuya Idemitsu, Yoshihiko Matsuki, Masanao Kishimoto, Yaohiro Inagaki, Tatsumi Arima, Yoshiko Haruguchi, Yu Yamashita, and Michitaka Sasoh
Radioactive Demonstrations of Fluidized Bed Steam Reforming (FBSR) with Hanford Low Activity Wastes 35
C. M. Jantzen, C. L Crawford, P. R. Burket, C. J. Bannochie, W. G. Daniel, C. A. Nash, A. D. Cozzi, and C. C. Herman
Advances in JHCM HLW Vitrification Technology at VSL through Scaled Melter Testing 47
Keith S. Matlack and Ian L. Pegg
Impact of Particle Agglomeration on Accumulation Rates in the Glass Discharge Riser of HLW Melter 59
J. Matyäs, D. P. Jansik, A. T. Owen, CA. Rodriguez, J. B. Lang, and A. A. Kruger
Systematic Development of Alkaline-Earth Borosilicate Glasses for Caesium Loaded Ion Exchange Resin Vitrification 69
O. J. McGann, P. A. Bingham, and N. C. Hyatt
Effect of Temperature on the Crevice Corrosion Susceptibility of Passivating Nickel Based Alloys 81
Edgar C. Hornus, C. Mabel Giordano, Martin A. Rodriguez, Ricardo M. Carranza, and Raul B. Rebak
Determining the Thermal Conductivity of a Melter Feed 91
Jarrett Rice, Richard Pokorny, Michael Schweiger, and Pavel Hrma
Electrochemical Properties of Lanthanum Chloride-Containing Molten LiCI-KCI for Nuclear Waste Separation Studies 103
S. O. Martin, J. C. Sager, K. Sridharan, M. Mohammadian, and T. R. Allen
Radionuclide Behaviour and Geochemistry in Boom Clay within the Framework of Geological Disposal of High-Level Waste 113
S. Salah, C. Bruggeman, N. Maes, D., Liu P., L. Wang, and P. Van Iseghem
GREEN TECHNOLOGIES FOR MATERIALS MANUFACTURING AND PROCESSING
Reclaiming Fibrous Material in Manufacturing Processes 129
Kevin D. Baker
Directional Drivers of Sustainable Manufacturing: The Impact of Sustainable Building Codes and Standards on the Manufacturers of Materials 135
Amy A. Costello and Marsha S. Bischel
Developing Thermal Processes with Energy Efficiency in Mind 147
Brian Fuller, Bruce Dover, and Tom Mroz
Joining of Silicon Nitride Ceramics by Local Heating Technique—Strength and Microstructure 155
Mikinori Hotta, Naoki Kondo, Hideki Kita, and Tatsuki Ohji
Development of Thermal Spraying and Patterning Techniques by using Thixotropic Slurries Including Metals and Ceramics Particles 163
Soshu Kirihara, Yusuke Itakura, Satoko Tasaki, and Yusuke Itakura
Novel Joining Method for Alumina by Surface Modification and Reduction Reaction 169
Ken'ichiro Kita and Naoki Kondo
Ionic Liquids used as Cleaning Solvent Replacements 181
Melissa Klingenberg, Janelle Yerty, Elizabeth Berman, and Natasha Voevodin
Evaluation of PYCAL 94 as an Environmentally Friendly Plasticizer for Polyvinyl Butyral for use in Tape Casting 191
Richard E. Mistier, Ernest Bianchi, and William McNamee
MATERIALS AND SYSTEMS FOR ENERGY APPLICATIONS
Conduction Plane Geometry Factors for the ß''-Alumina Structure 201
Emma Kennedy and Dunbar P. Birnie, III
Phase Change Materials and Their Impact on the Thermal Performance of Buildings 209
Marsha S. Bischel and William H. Frantz
Hydrogen-Exposed Welded Specimens in Bending and Rotational Bending Fatigue 221
Patrick Ferro, Reza Miresmaeili, Rana Mitra, Jason Ross, Will Tiedemann, Casey Hebert, Taylor Goade, Duncan Howard, and Keith Davidson
3-D Tin-Carbon Fiber Paper Electrodes for Electrochemically Converting C02 to Formate/Formic Acid 231
Shan Guan, Arun Agarwal, Edward Rode, Davion Hill, and Narasi Sridhar
Analysis of the Theory of Frequent Charge Collapses in a 25500KVA Hermetic Calcium Carbide Furnace 245
Hui Sun, Jian-Iiang Zhang, Zheng-jian Liu, Ye-xiao Chen, Ke-xin Jiao, Feng-guang Li
Corrosion Behavior of AISI 304L Stainless Steel for Applications in Nuclear Waste Reprocessing Equipment 257
Negin Jahangiri, A. G. Raraz, J. E. Indacochea, and S. McDeavitt
Author Index 267
About the Author :
Josef Matyáš is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
Tatsuki Ohji is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
Xingbo Liu is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
M. Parans Paranthaman is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
Ram Devanathan is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
Kevin M. Fox is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
Mrityunjay Singh is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
Winnie Wong-Ng is the editor of Advances in Materials Science for Environmental and Energy Technologies II, published by Wiley.
