Challenges in Mechanics of Time-Dependent Materials, Volume 2: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics

Challenges in Mechanics of Time-Dependent Materials, Volume 2: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Metallic, Polymeric and Composite Materials Effects of Extreme Environments including Radiation Resistance, Damage, and Aging Challenges in Time-dependent Behavior Modeling of Low, Moderate and High Strain Rates Effects of Inhomogeneities on the Time-Dependent Behavior Time dependent granular materials Composite, Hybrid and Multifunctional Materials Challenges in Time-dependent Behavior Modeling Viscoelastoplasticity and Damage Effects of Interfaces and Interphases on the Time-Dependent Behavior Mechanics of materials from advanced manufacturing, such as additive manufacturing Property characterization from AM Process modeling and simulations of AM Material design using AM Time-dependent and Small-scale Effects in Micro/Nano-scale Testing.

Table of Contents:
1 Unimorph Shape Memory Polymer Actuators Incorporating Transverse Curvature in the Substrate 2 Yield Criterion for Polymeric Matrix Under Static and Dynamic Loading 3 Investigating Uncertainty in SHPB Modeling and Characterization of Soft Materials 4 Diffusion of Chemically Reacting Fluids through Nonlinear Elastic Solids and 1D Stabilized Solutions 5 Effect of Temperature on Mechanical Property Degradation of Polymeric Materials 6 Small Strain Plasticity Behavior of 304L Stainless Steel in Glass-to-Metal Seal Applications 7 Observations of Rate-Dependent Fracture of Locally Weakened Interfaces in Adhesive Bonds 8 Time Dependent Response of Composite Materials to Mechanical and Electrical Fields 9 Characterizing the Temperature Dependent Spring-Back Behavior of Poly(Methyl Methacrylate) (PMMA) for Hot Embossing 10 Thermomechanical Fatigue Evaluation of Haynes® 230® for Solar Receiver Applications 11 Viscoelastic Characterization of Fusion Processing in Bimodal Polyethylene Blends 12 Viscoelastic Properties for PMMA Bar over a Wide Range of Frequencies 13 Implementation of Fractional Constitutive Equations into the Finite Element Method 14 Effect of Pressure on Damping Properties of Granular Polymeric Materials 15 Flow of Dry Grains Inside Rotating Drums 16 Statistical Prediction of Tensile Creep Failure Time of Unidirectional CFRP 17 Thermal Crystallinity and Mechanical Behavior of Polyethylene Terephthalate 18 Effect of UV Exposure on Mechanical Properties of POSS Reinforced Epoxy Nanocomposites 19 Overcoming Challenges in Material Characterization of Polymers at Intermediate Strain Rates 20 Prediction of Statistical Distribution of Solder Joint Fatigue Lifetime Using Hybrid Probabilistic Approach 21 Effect of Moisture and Anisotropy in Multilayer SU-8 Thin Films 22 Shrinkage Coefficient: Drying Microcrack Indicator 23 Thermo-Fluid Modeling of the Friction Extrusion Process.

About the Author :
H. Jerry Qi, Georgia Institute of Technology, Atlanta, USA. Bonnie Antoun, Sandia National Laboratories, Livermore, USA. Richard Hall, Air Force Research Laboratory, Wright-Patterson AFB, USA. Hongbing Lu, The Erik Johnson Schl of Eng, EC-38, University of Texas-Dallas, Dallas, USA. Alex Arzoumanidis, Psylotech, Inc., Evanston, USA. Meredith Silberstein, Cornell University, Ithaca, USA. Jevan Furmanski, ExxonMobil, Los Alamos, USA. Alireza Amirkhizi, University of California San Diego, La Jolla, USA. Joamin Gonzalez-Gutierrez, University of Ljubljana, Ljubljana, Slovenia.