Measurement Technology and Intelligent Instruments VI
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Measurement Technology and Intelligent Instruments VI: (Volumes 295-296 Key Engineering Materials)
Measurement Technology and Intelligent Instruments VI: (Volumes 295-296 Key Engineering Materials)

Measurement Technology and Intelligent Instruments VI: (Volumes 295-296 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

The requirements of high precision and of high-quality components and devices in meeting the needs of modern industry and society in disciplines such as semiconductors, optics, nanotechnology, MEMS, manufacturing, biomedical and environmental engineering, make measurement technology and intelligent instruments (which sense, measure and report), more important than ever, and essential for the rapid development of information technology. Following the lead of the previous five publications (1989, 1993, 1996, 1998, 2001) in the series, “Measurement Technology and Intelligent Instruments”, this book presents the most recent advances in this important field. In all, 123 papers were contributed from many regions of the world; including China, Taiwan (China), Japan, Russia, Hong Kong (China), Germany, Australia, Austria, Canada, Korea, Poland, Slovakia and the UK and US.

Table of Contents:
Laser Scattering Measurement of Microdefects on Silicon Oxide Wafer Characterisation of Surface Properties by a Multi-Function TPM Development of an Evanescent Light Measurement System for Si Wafer Microdefect Detection An Embedded FBG Sensor for Dynamic Strain Measurement for a Clamped-Clamped Composite Structure A Thermovision Method for Studying Deformation Kinetics of Materials and Structure Elements Damage Detection of Composite Structures Using Dynamic Analysis Investigation of Nonisothermal Crystallization Behaviors of Poly and Silica Nanocomposites Using Differential Scanning Calorimetry Ellipsometric Detection of Transitional Surface Structures on Decapped GaAs(001) Temperature Effect on the Stability of CuO Nanofluids Based on Measured Particle Distribution Determination of Young's Modulus of Micromechanical Silicon Films Using an Acoustic Excitation and Optical Detection Resonance Method A High Precision AFM for Nanometrology of Large Area Micro-Structured Surfaces A Study on the Mechanism of a New High Speed Scanning Miniature Nano-Measurement Probe Use of Fiber Interferometer for AFM Cantilever Probe Displacement Control Determining the Radial Modulus of DNA Measured by VPSFM Pitch Calibration by an Active Temperature Controlled Traceable Atomic Force Microscope and a Laser Diffractometer Micro-Force Calibration with an All-Coil Magnetic Levitation Effect of Residual Stresses on a Micromachined Z-Axis Vibrating Rate Gyroscope A Measurement System for Step Imprint Lithography Design and Simulation of a DETF for Use in a Resonant Gyroscope Micro Angle Measurement for a Scanning Stage Defocusing Detection of Geometric Sizes in Micro-Machining A Biological Sensor for Detecting Foreign Bodies Using a Balloon Probe A Resonant Frequency Measurement System for Osseointegration Trans-Femoral Implant Innovative 3D Dental Measurement for Tooth Model Restoration An Intelligent CO2 Sensor for Private Homes A Hybrid Optical Correlator Used as an Intelligent Instrument A Mobile Shearography System for Non-Destructive Testing of Industrial and Artwork Components A High Precision Three-Dimensional Optical Sensor Using Fourier Transform Profilometry Development and Verification of a Confocal Fabry-Perot Interferometer for Broad Band Ultrasound Detection Laser Feedback Interferometers Based on Orthogonally Polarized He-Ne Lasers A Two-Color Heterodyne Interferometer Based on Diffraction Grating for Displacement Measurement A New Method for the Development of Frequency Standards for the Optical Wavelength Range of 243nm Optical Measurement Technologies and Systems for Industrial Applications Influence of the Size of Round Objects on the Output Signal of Laser Measuring Scanner A Study on the Multi-Wavelength Drop Analysis Technology Accurate Estimation of Phase Distribution on Reference Plane in Grating Projection Measurement Measurement of Core Position of Fiber Array by a Calibrated Mask Method Detection of Random Defects on Highly Reflective and Complex Surfaces Automatic Laser Monitoring for Dam Safety An Application of the Kalman Filter in a Laser Tracking Measurement System A Scanning Multi-Probe Straightness Measurement System for Alignment of Linear Collider Accelerator Measurement of the Straightness of a Leadscrew-Driven Precision Stage A Circular Profile Measurement Method Using Software Techniques A High Precision Circuit Based on Digital Techniques for Roundness Measurement A Circle Contour Measurement Technique Based on Randomized Hough Transform Using Gradient Information A Coaxiality Measurement Method for Hole Using Non-Diffracting Beam Technology Effects of Rotation Angle on the Circular Test of Geometric Errors Theoretical Analysis and Basic Experiments for the 3D Displacement Measurement Using Ring-Shaped Laser Beam High Resolution Ultrasonic Distance Measurement Systems Using Pulse Compression and Their Applications A Multi-Range Fiber-Optical Non-Contact Displacement Micrometer A Study of the Deformation Measurement of 3D Displacement Field A Displacement Sensor Based on Differential Frequency Measurement Development of a Sensitive Probe for Coordinate Measuring Machines A Portable 3D Vision Coordinate Measurement System Using a Light Pen A High Precision Dynamic Autocollimator Three-Dimensional Slit Width Measurement for Long Precision Slot Dies Comprehensive Inspection of Geometric Parameters of Running Freight Car Wheel Pairs A New Method for the Measurement of Dynamic Angular Errors of a Photoelectric Shaft Encoder Dynamic Measurement of Bearing Radial Clearances Detection and Control of Synchro-Operation of Long-Stroke Cylinders in a Deep Ocean Mining Heave Compensation System An Ultraprecision On-Machine Measurement System Process Analysis and Characterization of ASNSS Using Automatic On-Line Measurement A Plastic Film Thickness On-Line Detecting System A Real-Time and On-Line Visual System for Seamless Steel Pipe Linearity Measurement A Structured-Light-Based On-Line 3D Measurement System and Software Development Effects of Key Parameters on the Performance of a New In-Process Optical Measurement Method Anti-Vibration Characteristics of a Lateral Shear Interferometer for On-Machine Surface Measurement Application of Wavelet Analysis for Online Measurement of Crude Oils On-Line Industrial 3D Measurement Techniques for Large Volume Objects Advances in Micro and Nano-Scale Surface Metrology 2D and 3D Surface Texture Comparisons Using Autocorrelation Functions Spline Filters for Surface Texture Analysis Web-Based Virtual Measurement, Analysis and Evaluation Software Development for 3D Surface Topography Texture Extraction and Identification of 3D Engineering Surfaces Combination of M-Estimation and Gaussian Filtering for Characterizing 3D Engineering Surfaces A Comparative Study of the Current 3D Motif Combination Methods A New Three-Dimensional Profilometer for Surface Profile Measurement Using Digital Fringe Projection and Phase Shifting A Two-Dimensional Surface Profile Imaging Technique Based on Heterodyne Interferometer A Laser Sensor Technique for Measuring 3D Surfaces Based on the Polarized Heterodyne Astigmatic Principle Development of a Large Range Nanometer Level Profilometer with Controlled Contact Force Instantaneous Measurement of 3D Profiles by Projecting Coded Grating A 3D Profile Parallel Detecting System Based on Differential Confocal Microscopy Artificial Life for Pavement Distress Survey Detection of Vortex Frequency in Gas Flow with Ultrasound Design, CFD Investigation and Implementation of a Novel Diverter Mechanism for Water Flow Measurement Determination of the Jetting Force of a Jet Actuator Performance Characterization of Pressure Sensors Using an Improved Pressure Square Wave Generator A High Sensitivity Pressure Sensing System with Fiber Bragg Grating Using the Transverse Strain Characteristics of a Straight Bourdon Tube A Polarized Optical Fiber Pressure Sensor with a Sampling Reference Optical Path A New Sensing System for Dynamic Pressure Measurement under Severe Conditions An Ultra-Precision Air-Pin Sensor and Its Dynamic Characteristics An Automatic Sorting System Based on Pneumatic Measurement An Optical Fiber Temperature Sensor Based on Spectrum Measurement A White Light Interference Distributed Optical Fiber Temperature Sensor A Novel Non-Gyro Inertial Measurement Unit Design of an Intelligent Multi-Gyro Measurement Device An X-Y Stage with a Plane Cross Grating Metrology System A Fast Search Coil Sensing Method for Tracking Systems Design of a Two-Degree of Freedom Beating Machine Evaluation of Thrust Force and Positioning Accuracy of a New Linear Motor Intelligence and Metrological Reliability of Measuring Transducers Built in Equipment Measurement of Finishing Errors for Evaluation of Dynamic Characteristics of NC Machine Tools Evaluation of Dynamic Parameters for Underdamped Grinding Machines Measurement and Analysis of the Dynamic Characteristics of a High Speed Painting Automizor Combination of ICA and SOM for Classification of Machine Condition Patterns Observation of Scattered Evanescent Waves Electromagnetic Field Analysis and Measurement for High Speed Attraction Type Magnetic Levitation Vehicle Systems A DDS Waveform Generator for Electromagnetic Non-Destructive Testing Eddy Current Testing Using a Model Based Measurement Method Power System Frequency Tracking Using an Adaptive Lattice Notch Filter A Least Square Method for Measurement and Optimisation in Selected Physical Experiments 3D Digital Measurement of Large Scale Objects Based on Viscous Target Surface Reconstruction Based on Laser Scan Data Improving Measurement Accuracy Using Image Super-Resolution Digital Image Processing for a Liquid Signature Analyzer System with CCD Camera Sub-Pixel Edge Detection for Precision Measurement Based on Canny Criteria An Application of the Fractal Theory in the Design of Heat Sink for Precision Measurement Instrument Online Calibration for a Stereo Vision Measurement System A New Ellipse Recognition Algorithm for CCD Camera A Rapid Calibration Method for the Laser Scanning 3D Measurement System Error Evaluation of Aspheric Surfaces and Calibration of the Test Instrument Order Tracking Filtering for Rotating Machinery Diagnosis Based on Zero Phase Distortion Digital Filtering An Application of the AGC Technology for Sensor Signal Processing


Best Sellers


Product Details
  • ISBN-13: 9780878499779
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Edition: Illustrated edition
  • Language: English
  • No of Pages: 800
  • Spine Width: 40 mm
  • Width: 170 mm
  • ISBN-10: 0878499776
  • Publisher Date: 01 Aug 2005
  • Binding: Paperback
  • Height: 240 mm
  • No of Pages: 800
  • Series Title: Volumes 295-296 Key Engineering Materials
  • Weight: 1500 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Measurement Technology and Intelligent Instruments VI: (Volumes 295-296 Key Engineering Materials)
Trans Tech Publications Ltd -
Measurement Technology and Intelligent Instruments VI: (Volumes 295-296 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Measurement Technology and Intelligent Instruments VI: (Volumes 295-296 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!