Fracture and Strength of Solids IV
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Fracture and Strength of Solids IV: (Volumes 183-187 Key Engineering Materials)
Fracture and Strength of Solids IV: (Volumes 183-187 Key Engineering Materials)

Fracture and Strength of Solids IV: (Volumes 183-187 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). Fracture, Fatigue and Strength are among the most important properties of engineering materials. The present volume covers all aspects of Fracture Mechanics, Computational Mechanics, Dynamic Fracture, Damage Mechanics, Fracture Physics, Fatigue and Creep of advanced materials, special emphasis being placed on Polymer and Polymer Composites, Metal Matrix and Ceramic Matrix Composites, Advanced Ferrous and Nonferrous Alloys and Nonmetallic Materials. Also covered are various Structural Aspects, Welding and Joining Properties, Stress Corrosion, Dynamic Loading Effects and other aspects limiting the Application of High-Tech Materials.

Table of Contents:
Length-Scale Effects in Nano- and Micro-Mechanics of Solids Mechanism-Based Strain Gradient (MSG) Plasticity and the Associated Asymptotic Crack-Tip Fields An Analysis of Fatigue Crack Growth Rate Considering Spatial Variation of Fatigue Crack Growth Resistance Rectangular Array and Zig-Zag Array of Elliptical Holes in Solids under Uniaxial Tension (Formulae of Maximum Stresses and Tensile Stiffnesses) Crack Growth in Stainless Steel 304AT 538°C under Fatigue Loading with and without Hold Time An Inverse Fracture Problem of a Shear Specimen with Double Cracks Fracture Mechanics Analysis of Cracked Plate Repaired by Composite Patch Fracture Toughness Test of Small CNS Specimen with an Interface Crack Subjected to Mixed-Mode Loading Theoretical Investigation of Controllable & Regular Fracture Theory Crack Identification Using Classical Optimization Technique Study on Strength of Rock Material under Dynamic Triaxial Compressive Loads Based on Sliding Crack Model Kinking out of a Mixed Mode Interface Crack Global Crack-Line Displacement Fitting Procedure: Edge Cracks A Stochastic Modeling for Predicting Fatigue Crack Growth under Variable Amplitude Loading A Highly Accurate BEM in Fracture Mechanics Simulation and Experimental Verification of Axial Multi-Crack Propagation and Crack Kinking in Pressurized Fuselage Calculation of Stress Intensity Factor Using Weight Function Method for a Patched Crack Interaction of a Horizontal Finite Crack with a Center of Dilatation in Elastic Half-Planes Determinations of Stress Intensity Factor in Isotropic and Anisotropic Body by the Photoelastic and Caustics Methods under Various Load Ratios A Micromechanics Criterion for the Ductile Fracture of a Polycarbonate Effect of Specimen Thickness and Load History on Crack Growth of 7175-T74 Forging Aluminum Alloy Plastic η Factors Based on Load-CMOD Records for SE(B) Toughness Testing Specimens Electromagnetic Thermoelastic Solids with an Elliptical Cavity or a Crack under Uniform Heat Flow Evaluation of Stress Intensity Factor Using White Light Photoelastic Experiment Singularity Intensity Factor Calculation in Plates and Shells Based on the Singular Line Mapping Technique in FEMOL Collective Evolution Characteristics and Computer Simulation of Voids Near the Crack Tip of Ductile Metal The Relationship of SIF between Plate and Plane Fracture Problems and the Effect of the Plate Thickness on SIF Fractographic Approach for Fracture Mode Microscopic Deformation at a Crack Tip in a Ferroelectric Material The Unified Description of the Three-Dimensional Fields at Notches and Cracks Buckling and Fracture of Thin Films under Compression Recent Advances in Three-Dimensional Fracture Mechanics Static Magnetoelastic Coupling in Soft Ferromagnetic Elastic Solids with Collinear Cracks A Study on Deformation Energy of P/M Copper and Ingot Material Fracture Analysis on the Coating Crack Perpendicular to the Interface of Bi-Material A Combined Model of Short Crack Closure Accounting for Both Plasticity and Roughness Induced Crack Closures Scattering of Plane Compressional Waves by a Spherical Inhomogeneity with a Linear Spring Type Interface From Recent Studies on Impact Fracture of Polymers and Polymer Composites Dynamic Stress Intensity Factors of Cylindrical Interface Cracks Subjected to P-Wave Effects of Impact Loading Rate on the Delamination Behavior of Composite Laminates Shock Adiabatics of Cement Mortar at Intense Dynamical Loading by Taking into Account the Internal Damage A Study on the Impact Failure Mechanism of Aluminum-PMMA Interfacial Crack Experimental Analysis of Dynamic Effects in Brittle Fracture of PMMA Impact Damage Behavior and Evaluation of Residual Strength in Plain-Woven Glass/Epoxy Composites Measurement of Dynamic Fracture Parameters in the Expansion Process at High Strain Rate A Study on the Development of the Dynamic Photoelastic Experimental Method for Isotropic/Orthotropic Bimaterials Evaluation of Large Strain in Ductile Polymers under High Speed Loading Damages in Woven Polymer Matrix Composites under Impact Loading Applications of the Shadow Spot Method on the Determination of Dynamic Stress Intensity Factors High Strain-Rate Deformation of Composite Materials Using a Split Hopkinson Bar Technique Experimental Studies on Dynamic Fracture Phenomena The Fracture Problem of Framed Plate under Explosion Loading Dynamic Mixed Mode Crack Propagation Behavior of Structural Bonded Joints Analysis of a Crack in a Functionally Gradient Interface Layer under Static and Dynamic Loading Fundamental Study of Dynamic Stress Wave Using a Dynamic Photoelastic Method Using High-Speed Camera to Investigate Failure Waves in K9 Glass A Study on Dynamic Fracture in Stiffened Cylinder Subjected to a Strong Acoustic Wave Static and Mode Analyses of Composite Plates Using Modified 16-Node Solid Elements, and Prediction of Stiffness Errors Resulting from Reduced Integration Shape Optimization of General Structures Simulation of Crack Growth and Creep Fracture by a Multicrack Growth Model Dual-Phase Functionally Graded Composite Materials: Overall and Discrete Analysis Models A Study on Efficiency Improvement of Evolutionary Structural Optimization Numerical Simulation of Crack Elongation and Reinforcement Effectiveness of the Isolated Rockmass between Shiplocks of Three Gorges Project Out-Of-Plane ESPI Simulation for the Harmonic Vibration of a Thin Right-Angled Plate Element Modeling for Vibration Analysis of Plate Hierarchical Models for Laminated Composite Structures Based on p-Extensions Nonlinear Displacement Field in the Vicinity of Notch-Tip in Rubber Toughened PMMA Optimum Design for Fatigue Strength Improvement of Spot-Welded T-Type Bus Window Pillar Member Dynamic Response Analysis of a Structure under High Over-Load Nonlinear Analysis of Thick Composites with Fiber Waviness under Flexural Loading Fuzzy Mathematical Method for Evaluation of Rock Mechanical Indexes Topology Optimization of the Inner Reinforcement for an Automobile Hood Using Modal Design Sensitivity Analysis Computational Studies on Dynamic Fracture Phenomena Nonlinear Dynamic Buckling Analysis of a Grid Structure Dynamic Modeling and Numerical Analysis for Large Scale Chime Group Plastic Analysis of Square Grillage under A Point Load Finite Element Analyses of Specific Damping Capacity and Undamped/Damped Forced Motion of Composite Plate Using Modified 16-Node Solid Elements Stress Analysis for New Gasketless Flange and Superseal A Study on Stress Wave Propagation in Stiffened Cylinder Subjected to a Strong Acoustic Wave Element-Free Galerkin Methods for Fracture of Functionally-Graded Materials A Study on the Shape Design and Contact Characteristic of Wheel-Rail for Rolling Stock Stress Analysis of Toroidal Hole in an Infinite Body A Parametric Study on the Fracture Mechanics Analysis of Elbow with Surface Crack On the Multiple Isoparametric Finite Element Method and Computation of Stress Intensity Factor for Cracks in FGMs The Effect of a Longitudinal Stiffener on the Elastic Shear Buckling of Orthotropic Web Plate Interaction among a Row of N Semi-Elliptical Notches and Edge Cracks A Computational Investigation on Metal/Ceramic Joints under Thermal Cyclic Loadings Progressive Failure Analysis of Composite Laminates Using 3-D Finite Element Method The Influence of Plastic Deformation on Interface Fracture Behavior An Analysis of Ironing Limit in Sheet Metal Forming The Versatility of the Method of KI, KII Analysis by FEM Based on the Stress Value at a Crack Tip Detecting Tool Wear in Face Milling with Different Workpiece Materials Three Dimensional Finite Element Analysis for Elastic Plastic Crack Propagation in Thin Metallic Plate Study on the Bending Fatigue Damage of the Carbon and the Polypropylene Hybrid Fiber Reinforced Concrete The Effect of Aging Temperatures and Time on Mechanical Properties of CF8M Effect of Temperature on the Damage Behavior of an Adhesively Bonded Butt Joint Effect of Yield Strength and Crack Depth on COD-Decrease-Parameter m A Study on Intergranular Corrosion of Laser Treated Alloy 600 by DL-EPR Method and Microscopic Examination Damage of FRP Plates Containing Sharp Notches or Blunt Notches Radiation Damage of Reactor Pressure Vessel Steels Studied by Nondestructive Methods Reliability Calculation for Piping Containing Circumferential Crack Based on 3-D Elastic-Plastic SFEM Optimum Design of Linear Phased Array Transducer for NDE A Damage Model for Void Configuration and Failure under Different Constrained Deformation Region in Ductile Matrix Modeling of Mechanical Property Degradation by Short-Term Aging at High Temperatures On Failure Modes and Strength Characterization of Brittle Disordered Materials under Uniaxial Compression and Tension Influence of Tool Wear on Hole Damage in Small Diameter Drilling of Printed Wiring Boards - Investigation based on Estimation of Cutting Forces and Internal Damage Damage Tolerance Analysis Software (DATAS) for Crack Growth Life Prediction and Residual Strength Analysis of Aircraft Structures Prediction of Piping Failure Behavior using Wide-Plate Test Vibration Sensing and Impact Location Detection Using Optical Fiber Vibration Sensor New Estimates of Effective Moduli of Microcracked Materials Realization of Higher-Mode Deformation of Beams Using Shape Memory Alloy Wires and Piezoceramics Fracture and Strength of Solids Associated with their Textures Overview of Fracture of Piezoelectric Ceramics Effect of Heat Treatment and Chemical Composition on Caustic Stress Corrosion Cracking of Alloy 600 and Alloy 690 Nonlinear Evolution Properties of Rock Microfracturing Affected by Environment Case Study on Fracture of Motor Whist Wire The Propagation of a Layer-Confined Love Wave in Layered Piezoelectric Structures Characteristics of Delamination in Graphite/Epoxy Laminates under Static and Impact Loads An Experimental Observation About Dislocation Nucleation Based On Peierls Concept Effect of Contact Shape on the Cracking Behaviour Study of Fracture Origin on Low Cycle Fatigue of Spheroidal Graphite Cast Iron Having Various Matrixes The Propagation Behavior of Love Waves in a Pre-stressed Piezoelectric Layered Structure The Effect of Nucleation Time on the Growth of a Microvoid in a Viscoelastic Material Effects of Stress Fields around Micro-Surface Defects on the Occurrence of Slip and Micro Cracks Studies of Fracture of Piezoelectric Ceramics at HKUST Tensile and Fracture Behaviors of PC/ABS Polymer Alloy Influence of Stochastic Mesoscopic Structure on Macroscopic Mechanical Behavior of Brittle Material Fracture and Strength of Notched Thick Composites A Study on the Integrity Evaluation for PWR Vessel by Pressurized Thermal Shock Crack Healing Behavior and Mechanical Property of Mullite/SiC Composite Ceramics Multi-Crack Coalesence in Rock-Like Material under Uniaxial and Biaxial Loading Effects of Temperature and Stacking Sequence on the Mode I Interlaminar Fracture Behavior of Composite Laminates Effect of Remanent Polarization on Electro-mechanical Fields Near an Elliptic Cavity or a Crack in Piezoelectric Ceramics Nano-Fractographic Estimation on the Profiles and Dimensions of Fatigue Striation Strength of Crack-Healed Si3N4/SiC Composite Ceramics Studies on the New Technique of Rapid Solidification and the Mechanical Behaviors of Mocrocrystalline Alloys The Effects of Texture on KIH in the Radial Direction in Zr-2.5%Nb Pressure Tube Materials Influence of Grain Boundary Characteristics on Cavitation Behavior in P/M7475 The Effects of Confining Compression on Fracture Coalesence in Rock-like Material Fracture Toughness Enhancement Due to Stress/Strain-Induced Martensitic Transformations in Solids Fracture Behavior of a Crack in Gas Pipeline Considering Constraint Effects Numerical Analysis of Dimple Fracture Process under Different Constraint Conditions Microstructure of the Carbon and the Polypropylene Hydrid Fiber Reinforced Concrete Acted by Bending and Tensile Stress Acoustic Emission Technique for Pipeline Leak Detection Fracture Behaviors of GFRP Plates Subjected to Impulsive Loading Fatigue Strength Decrease of Structural Materials Caused by Atmosphere Corrosion and Aging Creep Life and Properties Evaluation by ISM Method and Acoustic Emission for Cr-Mo-V Steels Expanding of the Fatigue Life of Thermal Barrier Coating by Mixing MoSi2 to Thermal Sprayed Layer Effects of Pad Material on Fretting Fatigue Behavior in CFRP Laminates Study on Double Shot Peening and Fatigue Limit of Gear A Study on Probabilistic Fatigue and Calendar Fatigue Life Influence of Microstructures on Fatigue Limit of High Strength Ductile Irons Fretting Fatigue Behavior of Structural Steels Fatigue Failure Model for Composite Laminates under Multi-Axial Cyclic Loading A New Method to Deal with the Staircase Fatigue Test Fatigue Life Prediction of Spot-Welded Joint by Strain Energy Density Factor using Artificial Neural Network Fatigue Properties of Tungsten Fiber Reinforced Ti-6Al-4V Alloy Failure Analysis of the Fourth Compressor Pans in Aero-Engines Thermal Aging and Low Cycle Fatigue Characteristics of CF8M in a Nuclear Reactor Coolant System Study of Crack Propagation Behavior on Low Cycle Fatigue in Spheroidal Grahite Cast Iron Based on Observation of Surface and Fracture Section Cyclic Softening Properties of 30Cr2MoV Steel at Elevated Temperatures A Study on the Corrosion Fatigue Characteristics of 12Cr Alloy Steel Corrosion Fatigue Crack Initiation Life of a Ship Structural Steel in Dilute Sulfuric Acids An Analysis of Random Fatigue Strength of K-Type Tubular Joints by Probabilistic Fracture Mechanics Method Fatigue Life Prediction of Bolted Joints Using Fatigue Modulus Study of Crack Propagation Behavior on Low Cycle Fatigue in Squeeze Cast Aluminium Alloy Reliability Analysis of Ship Hull Girders Considering the Degradations of Corrosion and Fatigue Fatigue Analysis of Vane Components for Gas Turbine Engine Fatigue Crack Growth Simulation and Estimation for Rolling Contact The Effect of Tensile Hold Time on the Fatigue Crack Propagation Behavior in STS 3l6L Fatigue Strength of Crack-Healed Ceramics Fracture Behaviours of Advanced Polymer Composites under Mixed Mode Loading Interface Adhesion and Interlaminar Fracture Resistance of Carbon/PEEK Composites influenced by Cooling Rate Nondestructive Evaluation of Degree of Fiber Waviness in Thick Composites The Damage Evaluation of Rigid Particle Filled Polymer Microstructural Morphology of Molded Thin Composites of Thermotropic Liquid Crystalline Polymer and Polyamide 6 Optimization of Molding Cure Condition on Al 7075/CFRP Sandwich Composite by the Taguchi Method An Application of Localized Flexibility Method to Damage Identification in CFRP Laminated Plate Crush Energy Absorbing Characteristics of Graphite/Epoxy Square Tubes Surface Modification of Carbon Fibers by Anodic Oxidation and its Effect on Adhesion The Bridging Analysis of Dynamic Crack Propagation in Fiber Reinforced PE Pipelines Optimum Stacking Sequence Design of Fiber-Metal Laminates for Using Genetic Algorithm A Thermomechanical Analysis of MCM-D Substrate of Polymer and Metal Multilayer Failure Behavior and Electrical Property of CFRP and CFGFRP Elastic Restraint between the Plate Components of FRP Compression Members Mixed-Mode Ply Cracking in Multidirectional Continuous Fiber Composite Laminates Axial Crush and Energy Absorption Characteristics of Aluminum/GFRP Hybrid Square Tube Mechanical Behavior of Carbon/Phenolic Ablative Composites for Nozzle Application Fracture Pattern and Lamination Configuration on Flexural Fracture of Multiple Layer CFRP Strength Prediction of Mechanical Joints in Laminated Composite Plates Crystallinity and Mechanical Properties of Glass Fiber Reinforced Thermoplastic Composites by Rapid Press Consolidation Technique Fractography of Damaged Carbon Fiber/Epoxy Composites after Low-Velocity Impact Anisotropic Mechanical Behavior of Three Dimensional Glass Fabric Reinforced Composites Prediction of Compressive Strength of Stiffened Composite Plate after Impact Void Nucleation Models and their Implications for the Material Behavior of Rubber-Modified Epoxies On-line Frequency Estimation and Adaptive Vibration Control of Composite Structures with Delaminations Strength and Fracture of Cu-Based Filamentary Nanocomposites Modeling of Thermal Shock Spalling Crack in a Ceramic Slabs Analytical Study of Prestrain Effects on Elastic Properties in Shape Memory Alloys A Study on the Friction and Wear Characteristics of Brake Pads for Al MMC Brake Disc On Targets Strength of Ceramic Materials for Impacting Penetration Effects of Heat Treatment on Bending Strength of Aluminum Alloy Matrix Composites Reinforced Aluminum Borate Whisker Mechanical Properties of Tungsten Fiber Reinforced Ti-6Al-4V Alloy Behavior of Cyclic Fatigue Crack Growth for SiC Ceramics A Model on the Strengthening and Embrittlement of Devitrified Nanocomposites Contact Damage Analysis of Ceramic/Metal Bilayer Composites with Various Modulus Mismatches Abrasive Wear Behavior of Hybrid Metal Matrix Composites Evaluation of Formability Properties of P/M Copper Preforms at Elevated Temperatures Effects of Interface and Residual Stress on Mechanical Properties of Ceramic/Metal System Design and Fabrication of Tooling for P/M Ferrous Gears Effects of Sintering Conditions on Mechanical Properties of Mechanically Alloyed Tungsten Heavy Alloys Analysis of Strengthening Mechanism in Hybrid Short Fiber/Particle Reinforced Metal Matrix Composites Effects of Welding Process and Crack Orientation on da/dN of Titanium Alloys Laser Welding of Ti-Ni Shape Memory Alloy Wire and its Fatigue Properties Investigation on Improving Fatigue Properties of Welded Joints by Ultrasonic Peening Method The Characteristics of Fatigue Strength in Laser Tailored Welded Blanking Sheet Metal Effect of the Mismatching of J-Integral for Pipe Welded Joint with Circumferential Surface Crack Validation of Defect Assessment Method for Structures with Weldments The Use of Temper Bead Welding for the Repair of Thick Walled Pressure Vessels Welding Residual Stress Analysis and Fatigue Crack Growth Characteristics of Multi-Pass Welded Pipe Weldment


Best Sellers


Product Details
  • ISBN-13: 9780878498611
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1434
  • Series Title: Volumes 183-187 Key Engineering Materials
  • Weight: 3100 gr
  • ISBN-10: 0878498613
  • Publisher Date: 29 Apr 2000
  • Binding: Paperback
  • Language: English
  • No of Pages: 1434
  • Spine Width: 72 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Fracture and Strength of Solids IV: (Volumes 183-187 Key Engineering Materials)
Trans Tech Publications Ltd -
Fracture and Strength of Solids IV: (Volumes 183-187 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Fracture and Strength of Solids IV: (Volumes 183-187 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!