Damage Assessment of Structures VIII: (Volumes 413-414 Key Engineering Materials)

Volume is indexed by Thomson Reuters CPCI-S (WoS). The primary aim of this volume was to gather together the current knowledge and expertise of scientists and engineers working, in both academia and industry, on damage assessment, structural health monitoring (SHM) and non-destructive evaluation (NDE).

Table of Contents:
Preface Conference Committee Keynote Papers Fault Damage Power and Self-Recovery System of Machinery Acoustic Emission in Structural Health Monitoring 1. Damage Location and Quantification Estimation of Crack Parameters through WFEM and Neural Network Modal Approach for Forced Vibration of Beams with a Breathing Crack The Experimental Research of Delamination Damage Location Based on FBG Sensors Network in Solid Rocket Motor Shell Sensor Triangulation for Damage Localisation in Composite Plates Identification of Small Crack in Beam Structures Using Anti-Resonant Frequency and Wavelet Analysis Pseudo Strain Energy Density-Based Structural Damage Identification Removing the Ambiguity in Lamb Wave-Based Damage Localization Damage Localisation in Thin Panels Using Elastic Wave Propagation Method Transmission and Reflection Coefficients for Damage Identification in 1D Elements Probability of Fault Location in a Beam Structure Using the Spectral Element Method and the Spatial Wavelet Analysis Semi-Quantitative Analysis of Defect in Pipelines through the Use of Technique of Ultrasonic Guided Waves Identification of Crack Parameters in a Cantilever Beam under Uncertain End Conditions Structural Damage Detection Accounting for Loss of Data in Wireless Network Sensors 2. Developments in Signal Processing and Algorithms Investigation Frequency Resolution Effect on Hilbert Spectrum for Instantaneous Vibration Impact Signal Analysis Crack Detection in Pipe Structures by Lifting Wavelet Finite Element Method Feature Extraction from Spectral Data Using the Bayesian Evidence Framework Application of Hilbert-Huang Transform Method on Fault Diagnosis for Wind Turbine Rotor Ensemble Empirical Mode Decomposition for Machine Health Diagnosis Gearbox Fault Diagnosis Based on Vibration Signals Measured Remotely The Response Characteristics of Various Impact Patterns on the Smart Bumper of Automotives Application of Rotational Measurements in Stiffness Reconstruction of Beams and Frames Statistical Analysis of Frequency Estimation Methods of Vibration Signal 3.Damage Assessment Implementation of Reliability-Based Criteria for Structural Integrity Assessment of Existing Structures The Research of the Effective Moduli of Particle Reinforced Polymer Composites Based on Interface Debonding Residual Life Assessment of Electricity Pylons – A Case Study Development of Delamination in Cross-Ply Laminates: Effect of Microstructure Damage Assessment of a Cracked Bar: Effect of Material Nonlinearity on Vibro-Impact Response Enhanced Assessment of the Remaining Service Life of a Steel Railway Bridge Numerical and Experimental Investigation of the Sensing Area of Piezoelectric Elements for Damage Detection with the E/M Impedance Method Statistical Damage Detection in a Smart Structure under Different Temperatures via Vibration Testing: A Global Model Based Approach Assessment of the Condition of a Beam Using a Static Loading Test A Review on Advances of Damage Identification Methods Based on Vibration Studies on Wavelet Packet-Based Crack Detection for a Beam under the Moving Load Development of Many-Angular Pin Type Load Cell for a Overload Limiter of a Movable Crane Spur Gear Crack Propagation Assessment Using Model-Based Analysis and Simulation Crack Size Estimation Using a Combination of Cross Correlation and Phase Shift Correction in Ultrasonic Time-of-Flight Diffraction Method Influence of Fatigue Loading on the Engineering Critical Assessment of Steel Catenary Risers in Sour Deepwater Oil and Gas Developments The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System Fractal Theory Based Damage Assessing Method of Acoustic Emission Test Results of Nondestructive Inspection of Layered Composites Using IR Thermography and Ultrasonics Bayesian Logic Applied to Damage Assessment of a Smart Precast Concrete Element Assessment, Strengthening and Validation of Prestressed Damaged Beams Detection of Various Damages Based on Piezoceramic Optical Fiber Sensor Applicaton of Modal Filtration for Damage Detection of Rotating Shaft 4. Condition Monitoring On Optimal Sensor Placement Criterion for Structural Health Monitoring with Representative Least Squares Method FE Model Updating for Damage Detection – Application to a Welded Structure Monitoring Vertical Loads on the Bearings of the High Coast Suspension Bridge The Design of Piezoelectric Transducer for Structural Health Monitoring Using Longitudinal Vibration Modes Particle Impact Damping in Two Dimensions Smart Rotating Machines for Condition Monitoring GA-SVR Based Bearing Condition Degradation Prediction Harvesting Vibration Energy for Structural Health Monitoring in Aircraft Condition Monitoring of Textiles Using Optical Techniques Application of Compressive Sampling for Accelerometer Signals Used in Structural Health Monitoring Research on Real-Time Process Monitoring Technology and System for High-Speed Turbopump Gearbox Condition Estimation Using Cyclo-Stationary Properties of Vibration Signal Analysis of the Response of a Rotor System Containing a Breathing Crack Thermoelectric Energy Harvesting for Wireless Sensor Systems in Aircraft Condition Monitoring of CI Engine Running on Biodiesel Using Transient Process Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors Experimental Study on Rubbing Acoustic Emission for Rotor-Bearing System Based on Parameter Analysis Investigation of Condition Monitoring of a Flap System 5. System Diagnostics and Prognosis Non-Linear Identification of a RC Element Using Time-Frequency Instantaneous Estimators A Steam Turbine Fault Diagnostic System Based on the Web and Database Technologies Research on the Fault Diagnosis Technology of Diesel Engine Based on the Instantaneous Speed Diagnose and Analysis of Coupling Faults on Nonlinear Rotor-Bearing-Seal System Prediction Fault Recognition Method of Rolling Bearings Based on Volterra Series and HMM A Novel Fault Diagnosis Method Using PCA and ART-Similarity Classifier Based on Yu’s Norm Wavelet Selection for Bearing Defect Diagnosis Research on Nonlinear Process Monitoring and Fault Diagnosis Based on Kernel Principal Component Analysis Shaft Crack Analysis and Diagnosis for the 600MW Steam Turbine Generator Experimental Investigation of Pedestal Looseness in a Rotor-Bearing System Fault Diagnostics Based on Pattern Spectrum Entropy and Proximal Support Vector Machine Signal Processing by Energy Normalization Method Based on Wavelet Packet Application of Cyclic Correlation Analysis to Gear Damage Detection Feature Extraction for Damage Detection in Structures Based on Nonlinearity Analysis Diagnosis of Rolling Elements Bearing Based on Inverse Autoregressive Filter Time-Varying Output-Only Identification of a Cracked Beam Defects Diagnosis of Bearing by Means of Acoustic Emission and Continuous Wavelet Transform 6. Damage Mechanisms Particle Swarm vs. Evolutionary Optimization Techniques in a Multiobjective Framework for Damage Identification Damage Identification Using Response Surface Methodology Simulations of a Dual-Rotor System with Local Rub-Impacts Based on Rigid-Flexible Multi-Body Model Spectral Element Modelling of Wave Propagation and Impedance Based SHM Systems Numerical Study of Thickness Distribution of Stretch-Blow Bottles for Defects Prediction Experimental Verification and Comparison of Mode Shape-Based Damage Detection Methods Modal Identification of an Experimental Model of Masonry Arch Bridge 7. Fatigue Damage Study and Application of Grey System Theory for Fatigue Life Prediction Life Prediction of Stainless Steels under Creep-Fatigue Dynamic Behaviour of Single Lap-Jointed Cantilevered Beams Fatigue Damage Evaluation and Retrofit of Steel Orthotropic Bridge Decks Fatigue Safety Evaluation of Existing Reinforced Concrete Bridges Fatigue Properties Assessment of Corroded Cable 8. Structural Integrity and Advanced Methods of NDT Influence of Disbond Defects on the Dispersion Properties of Adhesive Bonding Structures Integrity Strain Response Analysis of a Long Span Cable-Stayed Bridge Updating of Finite Element Model in Considering Mode Errors with Fuzzy Theory A Method for Acoustic Emission Source Identification Based on Optimisation Automatic Image Measurement Technology in Endoscopy NDT Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm Based on Higher Order Statistics