Advanced Oxidation Process-Based Integrated and Hybrid Technologies for Degradation of Pharmaceuticals and Personal Care Products

Advanced Oxidation Process-based Integrated and Hybrid Technologies for Degradation of Pharmaceuticals and Personal Care

Table of Contents:
1. Pharmaceuticals and Personal Care Products as Contaminants of Emerging Concern: Sources, Nature, and Possible Health Effects Smriti Ojha 2. Environmental Impact of Pharmaceuticals and Personal Care Products (PPCPs): Challenges, Removal Technologies, and Advanced Materials Nidhi Chauhan 3. Current State and Future Prospects of Hospital Wastewater Treatment Using Advanced Oxidation Processes Anupama Shrivastav 4. A review on synthesis silica oxide nanoparticles (SiO2-NPs) and their use to remove pharmaceuticals and personal care products (PPCPs) from aqueous solution Jay Mant Jha and Dhiraj Kishor Tatar 5. Membrane systems for the PPCPs removal from wastewater Shikha Wadhwa 6. Adsorption-Membrane hybrid system for pharmaceutical degradation Anupama Shrivastav 7. The removal of PPCPs from real wastewater Hind YAACOUBI and Afzal Husain Khan 8. Integrated and Hybrid Advanced Oxidation Processes (AOPs) - Biological systems for Degradation of Organic Pollutants from PPCPs Sonanki Keshri 9. PPCPs in wastewater: Kinetics and Thermodynamic analysis Joginder Singh and Prasann Kumar 10. Advanced oxidation process - Membrane bioreactor hybrid approach for the removal of Pharmaceutical and personal care products Anupama Shrivastav 11. Antibiotics degradation by AOP-based hybrid methods Yunus Ahmed 12. Removal of PPCPs using integrated Adsorption/AOP systems Shikha Wadhwa 13. Integrated and Hybrid AOP-Membrane systems for PPCPs degradation Pramita Sen 14. Membrane Fouling Control Using Integrated AOP-Membrane Systems Joginder Singh and Prasann Kumar 15. Biological Treatment for Degradation of Pharmaceutically Active Compounds (PhACs) in Wastewater Abhilasha Shourie, Anita Girdhar, Somya Asthana, and U. Vijayalakshmi 16. Design approach for sustainable integrated and hybrid wastewater techniques Sudha S 17. Electrochemical-based hybrid methods for the treatment of PPCPs in water matrix kisan koirala 18. Cost Estimation and Energy consumption of AOPs and AOP-based integrated and hybrid systems Joginder Singh and Prasann Kumar 19. Nanomaterials Integrated Hybrid Treatments of PPCPs Linkon Bharali 20. Sustainable Herbal Pharmaceutical Wastewater Treatment with Energy Recovery SUDHANSHU MISHRA 21. Recent advancements in pharmaceutical wastewater treatment: A Techno-Economic and environmental feasibility Shubha Dwivedi, Himanshi Chaudhary and Dr. Naveen Dwivedi 22. Emulsion Liquid membrane system for the pharmaceutical and personal care products removal from wastewater Himanshu Kohli, Akash R. Raval and Omprakash K. Mahadwad 23. An overview of Electrochemical advanced oxidation assisted processes for the treatment of pharmaceutical wastewater SAIF ULLAH KHAN, Asma Bari, Rahat ALam, Mohd Aqeel and Mohammad Faisal 24. Antibiotics Removal from Wastewater with PVA-Based Composites Deniz Izlen CIFCI 25. Technological advancements in decomposition of Pharmaceuticals and Personal Care Products using Photocatalytic Advanced Oxidation Processes Prabir Ghosh 26. Combinatorial Approach Integrating Advanced Oxidation Process to the Microalgal Treatment for PPCP Removal from Wastewater Abhilasha Shourie, Anita Girdhar, Shilpa Samir Chapadgaonkar, Samina Mazahar and Anamika Singh. 27. Efficiency Comparison of Hybrid Advanced Oxidation Processes for Removal of Ciprofloxacin from Water Kuldeep Kaur 28. Opportunities and Adoptive Challenges of Pharmaceuticals and Personal Care Products (PPCPs) in Wastewater Treatment Schemes in Developing Countries Alaa El Din Mahmoud

About the Author :
Dr. Amit K. Thakur received his B. Tech (Chemical Engineering) from Birsa Institute of Technology, Sindri, Dhanbad, India, M. Tech (Chemical Engineering) from the Indian Institute of Technology, Bombay, India, and Ph. D (Chemical Engineering) from University of Petroleum and Energy Studies, Dehradun, India. He has total 12 years of teaching and research experience. He has published more than 25 research papers in peer-reviewed international journals and participated in many conferences, workshops, and training programs. He has 1 patent granted by the government of India. He is reviewer of many journals such as, Separation science and Technology, Powder Technology, Chemical Engineering Research and Design, Particuology, International Journal of Chemical Reactor Engineering, etc. His research interest includes Advanced oxidation process, Pharmaceuticals, and personal care products (PPCPs) degradation, multi-scale modeling & optimization and Pharmaceutical Crystallization. He has published several chapters with Springer, Elsevier and Nova Science, USA, edited books. Dr. Rahul Kumar received his B. Tech (Chemical Engineering) from Bundelkhand Institute of Engineering & Technology, Jhansi, India, M. Tech (Chemical Engineering) from the Indian Institute of Technology, Bombay, India, and Ph. D (Chemical Engineering) from Jaypee University of Engineering & Technology, Guna, Madhya Pradesh, India. He has total 12 years of teaching and research experience. He has published more than 20 research papers in peer-reviewed international journals and participated in many conferences, workshops, and training programs. His research interest includes Environmental science, pharmaceutical degradation, multi-scale modeling & optimization and Pharmaceutical Crystallization. He has published many chapters with Springer Nature. Dr. Nadeem A Khan is currently working as an Assistant Professor in the Department of Civil Engineering at King Khalid University, Abha, Saudi Arabia. He worked at Mewat Engineering College as an Assistant Professor from August 1, 2012, to February 23, 2022. He has submitted his Ph.D. from Jamia Millia Islamia, New Delhi. He also acted as Academic Coordinator of the Civil Engineering department from 2014 to 2017. He is an editorial board member of Nature Journal - Scientific Reports (IF=4.3) and a special issue editor of Springer Journal on Discover Water. His recent accomplishments included 15 Coursera course completion certificates. LWT India and GECL awarded them the Best Young Scientist Award (Male) for their Scientific contribution to Environmental Engineering. He has also served as an external examiner and paper setter at Integral University, Lucknow, and Dehradun Technical University since 2013. Has got his M. Tech. (Civil Engineering) in 2011, and received Honors in Environmental Engineering from Aligarh Muslim University. Mr. Khan was associated with the Ministry of Environment and Forest for two years as a Junior Research Fellow (JRF) in 2009-11 and also worked with UNICEF as a Research Assistant (RA) on the topic ofGIS mapping andWater quality parameter estimation, including monitoring of the Agra Region for six months in 2012. He has professional experience at DLFLaing’s Rourke India Ltd as a Construction Engineer on an SEZ project in Gurgaon from 2008 to 2009. He qualified for the GATE examinations in 2010. His industry activity areas were post-contract works, reconciliation, planning, and budgeting. His one chapter about SBR wastewater treatment technology was recently published in Lenin Publication. He has attended several conferences, workshops, seminars, and research projects, and has engaged in various research endeavors. He has published 03 Books with International Publishers, 55 papers in SCI, and 15 in National journals. He has also published more than 10 patents in Civil Engineering and water treatment. He is also active in social welfare activities. He is the Joint Secretary of the Environmental Awareness Society, Environsense, which organizes over 25 events. Dr. Afzal Husain Khan works in the Civil and Architectural Engineering Department at Jazan University, Saudi Arabia. He received his PhD from Universiti Sains Malaysia, Malaysia, and B.E. and M. Tech degrees from the Aligarh Muslim University, India. He is an academic editor of PLOS ONE, Advances in Civil Engineering (Wiley), Associate Editor in TEIEE, and Guest Editor in Elsevier/Springer/Frontiers journals. He has been involved in many funded projects under the Deanship of Scientific Research (DSR) in Saudi Arabia. He has 90+ peer-reviewed publications (h-index >30; >3000+ citations), 4 books (edited), 6 patents, and 5 book chapters to his credit. Dr. Ravi Shankar received his B. Tech (Chemical Engineering) from Birsa Institute of Technology, Sindri, Dhanbad, India, M. Tech (Chemical Engineering) and Ph.D. from the Indian Institute of Technology, Roorkee, India. He has total 09 years of teaching, research, and industrial experience. He has published more than 35 research papers in peer-reviewed international journals. Presently he is supervising 07 Ph.D. students from different disciplines. His current research is related to Advanced Oxidation Process (Electrocoagulation), Microbial Fuel Cell, Heat Transfer, and Biofuel. He has published more than 10 book chapters in Springer, Elsevier and Nova Science, USA, edited books. Dr. Md. Nahid Pervez is a research fellow at the Department of Civil Engineering of the University of Salerno (Italy), where he drives research activities at the Sanitary Environmental Engineering Division (SEED). Dr. Pervez received his BSc degree in Textile Engineering (2014) at the Southeast University (Bangladesh) under the supervision of Prof Syed Fakhrul Hassan. After that, he secured Color Root (Hubei) Scholarship to pursue his MSc studies in Textile Engineering at the Wuhan Textile University (China) in 2016. Then he received his Ph.D. from the University of Salerno (Italy) in 2022. His research focuses on wastewater treatment, resource recovery, sustainable textiles, and process modelling. Dr. Pervez is the Topical Advisory Panel Member of Sustainability. He serves as Guest Associate Editor for Frontiers in Sustainability and Review Editor for Frontiers in Water.