TMS 2016 Supplemental Proceedings: 145th Annual Meeting and Exhibition

The TMS 2016 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2016 Annual Meeting & Exhibition, held February 14-18 in Nashville, Tennessee, USA. The papers in this volume represent 21 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 67 symposia held at TMS2016. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented “as is.” The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.

Table of Contents:
Additive Forming of Components – Tailoring Specific Material Properties in Low Volume Production Anisotropic Mechanical Properties in a Big-Sized Ti-6Al-4V Plate Fabricated by Electron Beam Melting 5 Pan Wang, Mui Ling Sharon Nai, Xipeng Tan, Wai Jack Sin, Shu Beng Tor, and Jun Wei Characterization of Microstructure and Mechanical Properties of Direct Metal Laser Sintered 15-5 PH1 Stainless Steel Powders and Components 13 Jing Zhang, Yi Zhang, Xingye Guo, Weng Hoh Lee, Bin Hu, Zhe Lu, Yeon-Gil Jung, and Je-Hyun Lee Materials Research in Reduced Gravity Effect of Thermal Drift on the Initial Transient Behavior in Directional Solidification of a Bulk Transparent Model Alloy 23 F.L. Mota, N. Bergeon, D. Tourret, A. Karma, R. Trivedi, and B. Billia Rapid Quench in an Electrostatic Levitator 31 Michael P. SanSoucie, Jan R. Rogers, and Douglas M. Matson Simulation of Shrinkage-Induced Macrosegregation in a Multicomponent Alloy during Reduced-Gravity Solidification 35 Ali Saad, Charles-Andre Gandin, Michel Bellet, Thomas Volkmann, and Dieter Herlach In Situ Investigation of the Effects of Gravity Level Variations on the Directional Solidification Microstructures during Parabolic Flights 43 L. Abou-Khalil , G. Salloum-Abou-Jaoude, G. Reinhart, C. Pickmann, G. Zimmermann, Y. Houltz, J. Li, O. Janson, and H. Nguyen-Thi Microstructural Evolution in Undercooled Al–8wt%Fe Melts 51 J. Valloton, A.A. Bogno, J. Chen, R. Lengsdorf, H. Henein, D.M. Herlach, U. Dahlborg, and M. Calvo-Dahlborg Metal and Polymer Matrix Composites II Degradation Study of High Melt Strength Polypropylene/Clay Nanocomposites in Environmental and Accelerated Conditions 61 Luiz Gustavo Hiroki Komatsu, Duclerc Fernandes Parra, Washington Luiz Oliani, Ademar Benevolo Lugao, and Vijaya Kumar Rangari Nanotube Sheet - Graphite Hybrid Nanocomposite for Damage Detection 69 Jiukun Li and Sirish Namilae Effect of Nano-Particle Addition on Grain Structure Evolution of Friction Stir Processed Al 6061 during Post-Weld Annealing 77 Guo Junfeng, Lee Bing Yang, Du Zhenglin, Bi Guijun, Tan Ming Jen, and Wei Jun Enhanced Ductility with Significant Increase in Strength of As-Cast CNTs/AZ91D Nanocomposites 85 Rongyu Feng, Lin Zhu, and Wenzhen Li The Synthesis and Processing Self-Healing Structural Al/Mg Lamellar Composite Materials 93 Yasser Fouad and Bakr Mohamed Rabeeh Filler Surface Nature, Bead, Solution Viscosity and Fibre Diameter of Electrospun Particle-Reinforced Polylactide 101 S.O. Adeosun, E.I. Akpan, O.P. Gbenebor, A.A. Peter, and S.A. Olaleye Evaluation of Intermetallic Reaction Layer Formation within Steel Encapsulated Metal Matrix Composites 109 Sean Fudger, Eric Klier, Prashant Karandikar, and Chaoying Ni Effect of Load and Grit Size on High Stress Abrasive Wear of Al-Mg-Si Hybrid Composites 119 N.Ch. Kaushik and R. Narasimha Rao The Corrosion of 30% Mo-ZrO Cermet in Molten Slag of CaO-MgOMgO-Al O 127 Xiaopeng Li, Ziming Wang, Yang Yang, Yanling Guo, Jieyu Zhang, and Wende Dan Study on Mechanical Property of Porous Titanium by Adding Powder Carbon 135 Guibao Qiu, Hao Cui, Tengfei Lu, Yilong Liao, and Yang Yang Fabrication of Gamma-Irradiated Polypropylene and AgNPs Nanocomposite Films and Their Antimicrobial Activity 143 Isabelle Oliveira Berenguer, Washington Luiz Oliani, Duclerc Fernandes Parra, Luiz Gustavo Hiroki Komatsu, Vinicius Juvino dos Santos, Nilton Lincopan, Ademar Benevolo Lugao, and Vijaya Kumar Rangari Natural Aging Effects in HMS-Polypropylene Synthesized by Gamma Radiation in Acetylene Atmosphere 151 Washington Luiz Oliani, Luiz Gustavo Hiroki Komatsu, Ademar Benevolo Lugao, Vijaya Kumar Rangari, and Duclerc Fernandes Parra Superaligned Carbon Nanotubes Reinforced Copper Nanocomposites with Enhanced Strength and Electrical Conductivity 159 Jing Shuai, Yu Jin, Lin Zhu, and Wenzhen Li Unedited Proceedings Additive Manufacturing: Building the Pathway towards Process and Material Qualification Selective Laser Melting of TiB /H13 Steel Bulk Nanocomposites: Influence of Nanoscale Reinforcment 171 B. Almangour, Dariusz Grzesiak, and J.M. Yang In-Space Manufacturing Baseline Property Development 177 Tom Stockman, Judith Schneider, Tracie Prater, Quincy Bean, and Nicki Werkheiser Using Powder Cored Tubular Wire Technology to Enhance Electron Beam Freeform Fabricated Structures 183 Devon Gonzales, Stephen Liu, Marcia Domack, and Robert Hafley Microstructure Evolution of Martensitic Stainless Steel in Laser Hot Wire Cladding with Multiple Heating Passes 191 Shaopeng Wei, Gang Wang, Zhenguo Nie, Zilin Huang, and Yiming Rong Effect of Printing Orientation on Strength of 3D Printed ABS Plastics 199 Linlin Cai, Philip Byrd, Hanyin Zhang, Kate Schlarman, Yi Zhang, Michael Golub, and Jing Zhang Verification of Numerically Calculated Cooling Rates of Powder Bed Additive Manufacturing 205 H.-W. Mindt, M. Megahed, N.P. Lavery, A. Giordimaina, and S.G.R. Brown Advanced Materials in Dental and Orthopedic Applications Beta-Type Titanium Alloys for Use as Rods in Spinal Fixation Devices 215 Mitsuo Niinomi, Masaaki Nakai, Huihong Liu, and Kengo Narita Effect of MMT Nanoparticle Clay on Flexural Properties of Polymer Based BisGMA/TEGDMA Resin 223 Duclerc Parra, Luiza Campos, Leticia Boaro, Henrique Ferreira, Ademar Lugao, and Vijaya Rangari Fatigue Performance of New Developed Biomedical Ti-15Mo Alloy with Surface Modified by TiO Nanotubes Formation 231 Nilson T.C. Oliveira, Leonardo C. Campanelli, Carolina C. Bortolan, and Claudemiro Bolfarini Computational Materials Discovery and Optimization: From 2D to Bulk Materials First Principles Investigation on TiAl Alloys Substitutively Doped with Si 239 Qing Du, WeiDong Hu, WangJun Peng, GuangXin Wu, WenDe Dan, and JieYu Zhang Effect of Strain on the Physical Properties of Lanthanum Nickelate 247 D. Misra, T.K. Kundu, and Ankit Hydrogen-Induced Core Structures Change of Screw and Edge Dislocations in Tungsten 253 Yinan Wang, Chengliang Li, Ben Xu, and Wei Liu Computational Materials Engineering for Nuclear Reactor Applications Validation of BISON Calculation of Hydrogen Distribution by Comparison to Experiment 263 Evrard Lacroix and Arthur Motta Computational Methods for Uncertainty Quantification, Model Validation, and Stochastic Predictions Effect of K-Point Convergence on Derived Properties for Pure Crystals 275 Thomas C. Allison Quantifying Model-Form Uncertainty in Molecular Dynamics Simulation 283 Anh V. Tran and Yan Wang Atomistic Study of Carbon Nanotubes: Effect of Cut-Off Distance 293 S. Thamaraikannan and S.C. Pradhan Bayesian Calibration of a Physical Model for Plastic Flow Behavior of TRIP Steels 301 P. Honarmandi and R. Arroyave Computational Thermodynamics and Kinetics Homogeneous Nucleation and Inner Structure Evolution in Nucleus Fe from Classic Molecular Dynamics Simulation 319 Jie Luo, Junjiang Xiao, and Yongquan Wu Anisotropy of Crystal-Melt Interface of BCC-Fe and FCC-Fe from Molecular Dynamics Simulation 327 Linlin Lv, Yewei Jiang, Yongquan Wu, and Junjiang Xiao Thermal Decomposition Kinetics of Manganese Carbonate in the Process of MnZn Ferrite Preparation 335 Lin Wang, Yan-hong Li, Jin-lin Lu, Wei Xu, and Hui-long Lin Solid-Liquid Phase Transitions of FCC-Al and HCP-Mg Nanoparticles 343 Yewei Jiang, Linlin Lv, and Yongquan Wu A Discrete Dislocation Model of Creep in Single Crystals 351 M. Rajaguru and S.M. Keralavarma Study of the Temperature Effects on Solid-Liquid Anisotropic Interfacial Energy 359 L.K. Wu, C.L. Li, B. Xu, Q.L. Li, and W. Liu Application of MIVM for Sn-Ag and Sn-In Alloys in Vacuum Distillation 367 Lingxin Kong, Junjie Xu, Baoqiang Xu, Shuai Xu, Bin Yang, Yifu Li, Dachun Liu, and Ruibo Hu Experiments and Kinetics Modeling for Gasification of Biomass Char and Coal Char under CO and Steam Condition 375 Guang-wei Wang, Jian-liang Zhang, Jiu-gang Shao, and Peng-cheng Zhang Optimization of Main Factors for Decarbonizing Ratio of TiB Powders by Reverse Flotation Using Response Surface Methodology 383 Xiaoxiao Huang, Shuchen Sun, Shuaidan Lu, Kuanhe Li, Xiaoping Zhu, and Ganfeng Tu General Poster Session A Novel Process for Treating with Low Grade Zinc Oxide Ores in Hydrometallurgy 393 Aichun Dou A Study of Taguchi Method to Optimize 6XXX Series Aluminum Anodic Oxide Film’s Hardness and Investigation of Corrosion Behaviors of Oxide Films 401 B.D. Polat, B. Bilici, P. Af in, C. Akyil, and O. Keles Anticorrosion Performance of Solanum Aethiopicum on Steel-Reinforcement in Concrete Immersed in Industrial/Microbial Simulating-Environment 409 Joshua Olusegun Okeniyi, Olugbenga Adeshola Omotosho, Elizabeth Toyin Okeniyi, and Adebanji Samuel Ogbiye Artificial Neural Network Modeling to Predict Hot Deformation Behavior of Zn-Al Alloy 417 Yingli Liu, Jiancheng Yin, Ying Jiang, and Yi Zhong Behavior of Tire Derived Pre-Functionalized Carbon Black for Uranium Adsorption 425 Travis Willhard, Dhiman Bhattacharyya, and Mano Misra Effect of Temperature on the Mechanical Behaviour of Ni-Ti Shape Memory Sheets 433 Girolamo Costanza, Maria Elisa Tata, and Riccardo Libertini Evaluation of Forged Aluminum Matrix Composites Reinforced with Carbon Nanotubes (CNTs) Fabricated by Composite Gas Generator (CGG) Process 441 Youngsek Yang, Myeonghak Kang, and Geunwoo Lee Gamma and Neutron Shielding Behavior of Spark Plasma Sintered Boron Carbide-Tungsten Based Composites 449 Salih Cagri Ozer, Bulent Buyuk, A. Beril Tugrul, Servet Turan, Onuralp Yucel, Gultekin Goller, and Filiz Cinar Sahin Image Analysis Investigating Porous Structures of Carbon Cathodes Materials and Melts Penetration 457 Xiang Li, Jilai Xue, Jun Zhu, and Shihao Song Inhibition of Stainless Steel Corrosion in 0.5 M H SO in the Presence of C H NH 465 Olugbenga Adeshola Omotosho, Joshua Olusegun Okeniyi, Emmanuel Izuchukwu Obi, Oluwatobi Oluwasegun Sonoiki, Segun Isaac Oladipupo, and Timi Moses Oshin Micro-Truncated Cone Arrays for Light Extraction of Organic Light-Emitting Diodes 473 Wei-Chu Sun, Ben Hsu, and Mao-Kuo Wei Mould Filling Ability Characterisation of SIMA Produced 6063 Alloy 481 Omer Vardar, Izzettin Ergun, Ca lar Yuksel, Eray Erzi, and Derya Dispinar One-Step Preparation of TiB -C Composite by DC Arc Furnace 487 Kuanhe Li, Shuchen Sun, Xiaoxiao Huang, Shuaidan Lu, Xiaoping Zhu, and Ganfeng Tu Si and SiCu Three Dimensional Sculptured Films as Negative Electrodes for Rechargeable Lithium Ion Batteries 493 B. Deniz Polat and Ozgul Keles Thickness Effect on the Three-Dimensional Sculptured SiCu Thin Films Used as Negative Electrodes in Lithium Ion Batteries 501 B. Deniz Polat, Ceren Yagsi, and Ozgul Keles ICME Infrastructure Development for Accelerated Materials Design: Data Repositories, Informatics, and Computational Tools An Integrated Model for Prediction of Yield Stress in Al-7Si-Mg Cast Alloys 511 Rui Chen, Qingyan Xu, Zhiyuan Xia, Huiting Guo, Qinfang Wu, and Baicheng Liu Experiences with ICME Information Infrastructures for Applying Materials Models in Sequence to Give Accurate Macroscopic Property Prediction 523 Will Marsden, David Cebon, Steven Arnold, Brett Bednarcyk, Nic Austin, and Igor Terentjev D2C – Converting and Compressing Discrete Dislocation Microstructure Data 531 D. Steinberger, M. Leimberger, and S. Sandfeld Material Behavior Characterization via Multi-Directional Deformation of Sheet Metal Determination of Bending Limit Curves for Aluminum Alloy AA6014-T4: An Experimental Approach 541 Ipsita Madhumita Das, Krishna Kumar Saxena, and Jyoti Mukhopadhyay 135° Clock Rolling: An Approach to Improve the Microstructure and Texture of Tantalum Used for Sputtering Target 549 Haiyang Fan, Shifeng Liu, and Chao Deng Material Design Approaches and Experiences Evolution Law of Grain Size of High Alloy Gear Steel in Hot Deformation 561 Hai-yan Tang, Mao-sheng Yang,Wen-jia Meng, and Jing-she Li Experimental Investigation of the Sm-Rich Side in Sm-Zr System 567 Tian Yin, Shuqiang Zhang, Zhihong Zhang, and Jieyu Zhang Materials and Fuels for the Current and Advanced Nuclear Reactors V Fabrication and Qualification of Small Scale Irradiation Experiments in Support of the Accident Tolerant Fuels Program 575 Connor Woolum, Kip Archibald, Glenn Moore, and Steven Galbraith Development of Engineering Parameters for Low Pressure Diffusion Bonds of 316 SS Tube-to-Tube Sheet Joints for FHR Heat Exchangers 583 Nils Haneklaus, Rony Reuven, Cristian Cionea, Peter Hosemann, and Per F. Peterson Mechanical Behavior at the Nanoscale III The Microstructure and Mechanical Properties of Nanometer Al O /Cu Composite Fabricated by Internal Oxidation 591 Lei Guo, Shuqiang Guo, Shuai Ma, Jie Liu, and Weizhong Ding Nanostructured Materials for Nuclear Applications The Roles of Oxide Interfaces and Grain Boundaries in Helium Management in Nano-Structure Ferritic Alloys: A First Principles Study 599 Y. Jiang, L.-T. Yang, J. Xu, G.R. Odette, Y. Wu, T. Yamamoto, Z.-J. Zhou, and Z. Lu Phase Transformations and Microstructural Evolution The Stability of the Moving Boundary in Spherical and Planar Geometries and Its Relation to Nucleation and Growth 609 Rahul Basu Effect of Pulse Magnetic Field on Isothermal Bainitic Transformation Process in Cr5 Steel 619 Wenming Nan, Daping Zhang, Lijuan Li, Qingchun Li, and Qijie Zhai Corrosion Effects on Mechanical Properties of Sensitized AA5083-H116 625 Robert J. Mills, Brian Y. Lattimer, and Scott W. Case The Effect of Initial Microstructure on the Mechanical Properties of Bi-Lamellar Ti-6Al-4V 633 Yan Chong and Nobuhiro Tsuji Some Steps towards Modelling of Dislocation Assisted Rafting: A Coupled 2D Phase Field – Continuum Dislocation Dynamics Approach 641 Ronghai Wu and Stefan Sandfeld Effect of Heating Types on the Undercooled Solidification Microstructure of Co Sn Eutectic Alloy 649 Tong Guo, Jun Wang, Xiaoxing Qiu, HongChao Kou, and Jinshan Li Mechanical Properties of 5000 Series Aluminum Alloys Following Fire Exposure 657 Jillian C. Free, Patrick T. Summers, Brian Y. Lattimer, and Scott W. Case Effect of Concurrent Microstructure Evolution and Hydrogen Level on Flow Behavior of Near Alpha Ti-Alloy 665 Jagadeesh Babu, B.P. Kashyap, N. Prabhu, R. Kapoor, R.N. Singh, Bhupendra K. Kumawat, and J.K. Chakravartty Using Temporary Hydride Formation in Metastable Beta Titanium Alloys to Improve the Microstructure 673 Hans-Jurgen Christ and Vitali Macin Numerical Simulation of Solidification Microstructure with Active Fiber Cooling for Making Fiber-Reinforced Aluminum Matrix Composites 685 Zhiliang Yang, Bo Wang, Shupei Liu, Jie Ma, Wanping Pan, Shuai Feng, Liang Bai, and Jieyu Zhang Assessment of Tribological Properties of Cast and Forged Ti-6Al-7Nb and Ti-6Al-4V Alloys for Dental Applications 693 Ahmed Zaki, Shimaa El-Hadad, and Waleed Khalifa Phase Transformations in Multi-component Systems: An MPMD Symposium Honoring Gary R. Purdy Solid State Reaction of Nd Fe B and Carbon 703 Jie Liu, Shuqiang Guo, Yuyang Bian, Lei Guo, Lan Jiang, Man Zhang, Shuai Ma, and Weizhong Ding Powder Metallurgy of Light Metals Production of Titanium Hydride Powder by Leaching of Aluminum and Silicon Impurities from Reduced Upgraded Titania Slag for Low Cost Titanium Production 713 Syamantak Roy, Jaehun Cho, Nathan J. Hamilton, Amarchand Sathyapalan, Michael L. Free, and Zhigang Zak Fang Mechanical Properties and Microstructure of PM Ti-Si N Discontinuous Fibre Composite 721 Troy Dougherty, Ying Xu, and Ainaa Hanizan Microstructure Evolution and Mechanical Properties Investigation of Friction Stir Welded AlMg5-Al O Nanocomposites 729 N. Kishore Babu, Kaspar Kallip, Marc Leparoux, Khaled A. AlOgab, G.M. Reddy, and M.K. Talari Titanium Foam for Cancellous Bone Implant Prepared by Space Holder Technique 737 Xiao Jian, Cui Hao, Qiu Guibao, and Yang Yang Recent Developments in Biological, Structural and Functional Thin Films and Coatings Thin Films and Coatings for Absorptive Removal of Antimicrobials, Antibiotics, and Other Pharmaceuticals 747 David Cocke, Andrew Gomes, Saiful Islam, and Gary Beall Effect of Post-Heat Treatment on the Electrochemical Performance of Sandwich Structured Cu/Sn/Cu Electrode 755 B. Bilici, B.D. Polat, and O. Keles Role of Membrane Properties on Charge Transport across Conjugated Oligoelectrolyte Modified Phospholipid Bilayers 763 Justin P. Jahnke, Guillermo C. Bazan, and James J. Sumner The Investigation on the Intermetallic Layer of Hot Dipping Al-10Si Alloy with 22MnB5 and DC51 Substrate 771 Weidong Hu, Wende Dan, Wangjun Peng, Guangxin Wu, Qing Du, and Jieyu Zhang The Wetting Behavior of Fe-Si and Fe-Mn Alloy with Al-10%Si Coating 779 Wende Dan, Guangxin Wu, Bo Zhang, Qing Du, Wangjun Peng, Weidong Hu, and Jieyu Zhang Refractory Metals 2016 Improving the Performance of Nb-Silicide Based Refractory Alloys Through a Novel Cold Crucible Directional Solidification 789 Hongsheng Ding, Kun He, Shiqiu Liu, Yongwang Kang, and Jingjie Guo Author Index 797 Subject Index 801

About the Author :
Headquartered in the United States but international in both its membership and activities, The Minerals, Metals & Materials Society (TMS) is a rare professional organization that encompasses the entire range of materials and engineering, from minerals processing and primary metals production to basic research and the advanced applications of materials.